Effect of build orientation in the SLM process on the microstructure, dislocation structure, and tribological properties of a CoCrWMo alloy
Source abstract
Abstract
Abstract This study investigates the effect of build orientation on the microstructure, mechanical response, dislocation behaviour, and wear mechanisms of CoCrWMo alloy produced by Selective Laser Melting. Samples were fabricated at seven build angles (0°–90°) and analysed using SEM, XRD, EBSD, nanoindentation, and ball-on-disc tribological testing. A strong correlation was obserwed between grain orientation and wear behaviour. Low-angle samples exhibited well-aligned columnar grains with high dislocation mobility and mild abrasive wear, whereas high-angle samples showed misaligned grains, reduced dislocation activity, and delamination-driven wear. Quantitative analysis revealed that microstrain decreased from approximately 0.0058 at 0° to 0.0031 at 90°, while crystallite size increased from 19 to 57.8 nm, indicating significant microstructural relaxation at higher build angles. EBSD analysis performed near plastically deformed regions revealed a strain-induced FCC→HCP phase transformation at higher build angles. The presence of the HCP phase leads to the formation of additional phase boundaries, which modify the local deformation behaviour. Dislocation mobility decreased by nearly an order of magnitude, from 4.48 × 10⁻⁹ m/s at 0° to 0.56 × 10⁻⁹ m/s at 90°, reflecting increasing constraints on plastic deformation. Despite similar wear volumes across orientations, SEM analysis of wear debris confirmed distinct mechanisms governed by microstructural anisotropy. Although hardness remained relatively constant (4.1–4.4 GPa), Young’s modulus decreased from 182 to 191 GPa to 176 GPa with increasing build angle, indicating pronounced elastic anisotropy. These findings highlight the critical role of grain boundary orientation and dislocation dynamics in controlling the tribological response of SLM-fabricated CoCrWMo alloy and provide new insight into proces-structure-property relationships in additively manufactured materials.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Kazantseva NV, Ezhov IV, Davydov DI, Merkushev AG. Analysis of structure and mechanical properties of Co-Cr-Mo alloy obtained by 3D printing. Phys Met Metallogr. 2019;120(12):1172–9. https://doi.org/10.1134/S0031918X19120081.10.1134/S0031918X19120081 ↗
2. Roudnicka M, Bigas J, Molnarova O, Palousek D, Vojtech D. Different response of cast and 3D-printed Co-Cr-Mo alloy to heat treatment: a thorough microstructure characterization. Metals. 2021;11(5):689. https://doi.org/10.3390/met11050687.10.3390/met11050687 ↗
3. Saini JS, Dowling L, Trimble D, Singh D. Mechanical properties of selective laser melted CoCr alloys: a review. J Mater Eng Perform. 2021;30(12):8700–14. https://doi.org/10.1007/s11665-021-06283-1.10.1007/s11665-021-06283-1 ↗
4. Cosma C, Moldovan M, Simion M, Balc N. Impact of laser parameters on additively manufactured cobalt-chromium restorations. J Prosthet Dent. 2022;128(3):421–9. https://doi.org/10.1016/j.prosdent.2020.11.043.10.1016/j.prosdent.2020.11.043 ↗
5. Stamenković D, Baciu AM, Balos S, Pavlicevic J, Radosavljevic I, Bugarski B, et al. Comparative study of the microstructure and properties of cast-fabricated and 3D-printed laser-sintered Co-Cr alloys for removable partial denture frameworks. Materials. 2023;16(8):3267. https://doi.org/10.3390/ma16083267.10.3390/ma16083267 ↗
6. Hong JH, Yeoh FY. Mechanical properties and corrosion resistance of cobalt-chrome alloy fabricated using additive manufacturing. Mater Today Proc. 2020;29:196–201. https://doi.org/10.1016/j.matpr.2020.05.54310.1016/j.matpr.2020.05.543 ↗
7. Hong MH, Min BK, Kwon TY. The influence of process parameters on the surface roughness of a 3D-printed Co-Cr dental alloy produced via selective laser melting. Appl Sci. 2016;6(12):401. https://doi.org/10.3390/app6120401.10.3390/app6120401 ↗
8. Baciu AM, Lascu L, Berce P, Opris A, Vlasa M, Pop R. Influence of process parameters for selective laser melting on the roughness of 3D printed surfaces in Co-Cr dental alloy powder. IOP Conf Ser Mater Sci Eng. 2019;572(1):012054. https://doi.org/10.1088/1757-899X/572/1/012054.10.1088/1757-899X/572/1/012054 ↗
9. Wang JH, Ren J, Liu W, Wu XY, Gao MX, Bai PK. Effect of selective laser melting process parameters on microstructure and properties of Co-Cr alloy. Materials. 2018;11(9):1546. https://doi.org/10.3390/ma11091546.10.3390/ma11091546 ↗
10. AlMangour B, Luqman M, Grzesiak D, Al-Harbi H, Ijaz F. Effect of processing parameters on the microstructure and mechanical properties of Co-Cr-Mo alloy fabricated by selective laser melting. Mater Sci Eng A. 2020;792:139456. https://doi.org/10.1016/j.msea.2020.139456.10.1016/j.msea.2020.139456 ↗
11. Jat VK, Patil RU, Samant SS. Influence of scanning strategies on the tensile and fatigue properties of direct metal laser sintering-printed Co-Cr-Mo alloy. J Mater Eng Perform. 2024. https://doi.org/10.1007/s11665-024-09753-4.10.1007/s11665-024-09753-4 ↗
12. Ranuša M, Čípek P, Vrbka M, Paloušek D, Křupka I, Hartl M. Tribological behaviour of 3D printed materials for small joint implants: a pilot study. J Mech Behav Biomed Mater. 2022;132:105274. https://doi.org/10.1016/j.jmbbm.2022.105274.10.1016/j.jmbbm.2022.105274 ↗
13. Sahasrabudhe H, Traxel KD, Bandyopadhyay A. Understanding wear behavior of 3D-printed calcium phosphate-reinforced CoCrMo in biologically relevant media. J Mech Behav Biomed Mater. 2021;120:104564. https://doi.org/10.1016/j.jmbbm.2021.104564.10.1016/j.jmbbm.2021.104564 ↗
14. Amanov A. Effect of post-additive manufacturing surface modification temperature on the tribological and tribocorrosion properties of Co-Cr-Mo alloy for biomedical applications. Surf Coat Technol. 2021;421:127378. https://doi.org/10.1016/j.surfcoat.2021.127378.10.1016/j.surfcoat.2021.127378 ↗
15. Quan TW, Tan X, Bhowmik A, Liu E, Tor SB. Tribochemical characterization and tribocorrosive behavior of CoCrMo alloys: a review. Materials. 2018;11(1):30. https://doi.org/10.3390/ma11010030.10.3390/ma11010030 ↗
16. Orgeldinger C, Seynstahl A, Rosnitschek T, Tremmel S. Surface properties and tribological behavior of additively manufactured components: a systematic review. Lubricants. 2023;11(6):257. https://doi.org/10.3390/lubricants11060257.10.3390/lubricants11060257 ↗
17. Dwivedi S, Shaw PK, Kumar D, Mardi KB, Dixit AR. Comparative study on surface wettability, bio-tribology, and cytotoxicity of selective laser melted 316L SS, CoCrMo, and Ti6Al4V metallic biomaterials. Manuf Lett. 2024;41:947–54. https://doi.org/10.1016/j.mfglet.2024.09.117.10.1016/j.mfglet.2024.09.117 ↗
18. Malik A, et al. Tribo-corrosive behavior of additive manufactured parts for orthopaedic applications. J Orthop. 2022;34:49–60. https://doi.org/10.1016/j.jor.2022.08.006.10.1016/j.jor.2022.08.006 ↗
19. Ramezani M, Ripin ZM. Investigation of wear and friction behavior of cobalt-chromium-molybdenum alloy produced by laser powder bed fusion. Appl Sci. 2023;13(19):10582. https://doi.org/10.3390/app131910582.10.3390/app131910582 ↗
20. Hemachandra M, Thapliyal S, Adepu K. A review on microstructural and tribological performance of additively manufactured parts. J Mater Sci. 2022;57(36):17139–61. https://doi.org/10.1007/s10853-022-07736-1.10.1007/s10853-022-07736-1 ↗
21. Saha S, Roy S. Metallic dental implants wear mechanisms, materials, and manufacturing processes: a literature review. Materials. 2023;16(1):161. https://doi.org/10.3390/ma16010161.10.3390/ma16010161 ↗
22. Acharya S, Soni R, Suwas S, Chatterjee K. Additive manufacturing of Co-Cr alloys for biomedical applications: a concise review. J Mater Res. 2021;1–15. https://doi.org/10.1557/s43578-021-00157-9.10.1557/s43578-021-00157-9 ↗
23. Renner P, Jha S, Chen Y, Raut A, Mehta SG, Liang H. A review on corrosion and wear of additively manufactured alloys. J Tribol. 2021;143(5). https://doi.org/10.1115/1.4050503.10.1115/1.4050503 ↗
24. Paufler PRA, Young, editors. The rietveld method. International union of crystallography. Oxford University Press 1993. Cryst Res Technol. 1995;30(4):494. https://doi.org/10.1002/crat.217030041210.1002/crat.2170300412 ↗
25. Sneddon IN. The relation between load and penetration in the axisymmetric Boussinesq problem for a punch of arbitrary profile. Int J Eng Sci. 1965;3(1):47–57. https://doi.org/10.1016/0020-7225(65)90019-4.10.1016/0020-7225(65)90019-4 ↗
26. Oliver WC, Pharr GM. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res. 1992;7(6):1564–83. https://doi.org/10.1557/JMR.1992.1564.10.1557/JMR.1992.1564 ↗
27. Fischer-Cripps AC. Nanoindentation testing. In: Fischer-Cripps AC, editor. Nanoindentation. New York: Springer; 2011. pp. 21–37.10.1007/978-1-4419-9872-9_2 ↗
28. Fu G. An extension of Hertz’s theory in contact mechanics. J Appl Mech. 2006;74(2):373–4. https://doi.org/10.1115/1.2188017.10.1115/1.2188017 ↗
29. Mergulhão M, Podestá C, Neves M. Investigation of mechanical, microstructural and thermal behavior of CoCrMo alloy manufactured by selective laser melting and casting techniques. 9º Congresso Brasileiro de Engenharia de Fabricação; 2017. https://doi.org/10.26678/ABCM.COBEF2017.COF2017-128610.26678/ABCM.COBEF2017.COF2017-1286 ↗
30. Qiu X, Huang Y, Nix WD, Hwang KC, Gao H. Effect of intrinsic lattice resistance in strain gradient plasticity. Acta Mater. 2001;49(19):3949–58. https://doi.org/10.1016/S1359-6454(01)00299-3.10.1016/S1359-6454(01)00299-3 ↗
31. Zhang K, Holmedal B, Mánik T, Saai A. Assessment of advanced Taylor models, the Taylor factor and yield-surface exponent for FCC metals. Int J Plast. 2019;114:144–60. https://doi.org/10.1016/j.ijplas.2018.10.015.10.1016/j.ijplas.2018.10.015 ↗
32. Tabor D. The hardness of metals. Oxford: Oxford University Press; 2023.
33. Nix WD, Gao H. Indentation size effects in crystalline materials: a law for strain gradient plasticity. J Mech Phys Solids. 1998;46(3):411–25. https://doi.org/10.1016/S0022-5096(97)00086-0.10.1016/S0022-5096(97)00086-0 ↗
34. Orowan E, Zur Kristallplastizität III. Z Phys. 1934;89(9):634–59. https://doi.org/10.1007/BF01341480.10.1007/BF01341480 ↗
35. Łępicka M, Tsybrii Y, Kiejko D, Golak K. The effect of TiN and DLC anti-wear coatings on the tribofilm formation and frictional heat phenomena in coated metals vs. WC-Co. Material. 2021;14:3342. https://doi.org/10.3390/ma14123342.10.3390/ma14123342 ↗
36. Zhou Y, Sun Q, Dong X, Li N, Shen ZJ, Zhong Y, Eriksson M, Yan J, Xu S, Xin C. Microstructure evolution and mechanical properties improvement of selective laser melted Co-Cr biomedical alloys during subsequent heat treatments. J Alloys Compd. 2020;840:155664. https://doi.org/10.1016/j.jallcom.2020.155664.10.1016/j.jallcom.2020.155664 ↗
37. Nong XD, Zhou XL. Effect of scanning strategy on the microstructure, texture, and mechanical properties of 15-5PH stainless steel processed by selective laser melting. Mater Charact. 2021;174:111012. https://doi.org/10.1016/j.matchar.2021.111012.10.1016/j.matchar.2021.111012 ↗
38. Hagihara K, Nakano T. Control of anisotropic crystallographic texture in powder bed fusion additive manufacturing of metals and ceramics—a review. JOM. 2022;74(4):1760–73. https://doi.org/10.1007/s11837-021-04966-7.10.1007/s11837-021-04966-7 ↗
39. Thijs L, Verhaeghe F, Craeghs T, Van Humbeeck J, Kruth JP. A study of the microstructural evolution during selective laser melting of Ti-6Al-4V. Acta Mater. 2010;58(9):3303–12. https://doi.org/10.1016/j.actamat.2010.02.004.10.1016/j.actamat.2010.02.004 ↗
40. Lewandowski JJ, Seifi M. Metal additive manufacturing: a review of mechanical properties. Annu Rev Mater Res. 2016;46(1):151–86. https://doi.org/10.1146/annurev-matsci-070115-032024.10.1146/annurev-matsci-070115-032024 ↗
41. Mower TM, Long MJ. Mechanical behavior of additive manufactured, powder-bed laser-fused materials. Mater Sci Eng A. 2016;651:198–213. https://doi.org/10.1016/j.msea.2015.10.068.10.1016/j.msea.2015.10.068 ↗