Unveiling the role of deposition parameters on the in-situ microstructure, mechanical response, and corrosion performance of additive friction stir deposited AA5083 alloy
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. Sharma A, Jain R, Agrawal P, et al. Enhanced thermal stability in additive friction stir deposited ODS IN9052 Al alloy. Acta Mater. 2024;279:120284. https://doi.org/10.1016/j.actamat.2024.120284.10.1016/j.actamat.2024.120284 ↗
2. Liu Z, Wang J, Qin Z, et al. A mechanistic study on stress corrosion cracking of sensitized AA5083 in a simulated water level fluctuation zone: combined impedance analysis and tensile tests. Corros Sci. 2025;245:112701. https://doi.org/10.1016/j.corsci.2025.112701.10.1016/j.corsci.2025.112701 ↗
3. Yao C, Ji Y, Ding F, et al. Revealing the intergranular corrosion mechanism of AA5083 alloys through experiments and atomic-scale computation. J Mater Sci Technol. 2025;216:285–99. https://doi.org/10.1016/j.jmst.2024.06.055.10.1016/j.jmst.2024.06.055 ↗
4. Karmiris-Obratański P, Papantoniou IG, Leszczyńska-Madej B. Microstructure, mechanical and tribological properties of AA5083-TiO2 nanocomposite by multi-pass friction stir processing. Arch Civ Mech Eng. 2024;24:209. https://doi.org/10.1007/s43452-024-01025-1.10.1007/s43452-024-01025-1 ↗
5. Pouraliakbar H, Howells A, Gallerneault M, et al. Fracture behavior of a rapidly solidified thin-strip continuous cast AA5182 Al-Mg alloy with the Portevin-Le Chatelier effect under varying strain rates. J Alloys Compd. 2024;971:172810. https://doi.org/10.1016/j.jallcom.2023.172810.10.1016/j.jallcom.2023.172810 ↗
6. Pouraliakbar H, Jamshidi Aval H, Farajollahi R, et al. Friction stir welding of a rapidly solidified thin-strip continuous cast AA5182 Al–Mg alloy: analysis of microstructure evolution, mechanical properties, and corrosion resistance. Int J Adv Manuf Technol. 2024;133(9):4263–80. https://doi.org/10.1007/s00170-024-14020-w.10.1007/s00170-024-14020-w ↗
7. Hoarston JB, Strain J, Artzer A, et al. Understanding the influence of heat input and deposition pitch on achieving isotropic tensile behavior in large-scale AM of AA7075 additive friction stir depositions. Additive Manuf. 2025;104907. https://doi.org/10.1016/j.addma.2025.104907.10.1016/j.addma.2025.104907 ↗
8. Zhu Z, Hu Z, Seet HL, et al. Recent progress on the additive manufacturing of aluminum alloys and aluminum matrix composites: microstructure, properties, and applications. Int J Mach Tools Manuf. 2023;190:104047. https://doi.org/10.1016/j.ijmachtools.2023.104047.10.1016/j.ijmachtools.2023.104047 ↗
9. Pouraliakbar H, Aval HJ, Jandaghi MR, et al. Synergistic impact of tool geometry and heat input on microstructure and texture development in friction stir processed AA6061-Graphene nanocomposites. Mater Today Commun. 2025;45:112371. https://doi.org/10.1016/j.mtcomm.2025.112371.10.1016/j.mtcomm.2025.112371 ↗
10. Kobiela K, Smolina I, Gruber K et al. Corrosion behaviour of Al5254 alloy with tantalum addition processed by powder bed fusion–laser beam. Arch Civ Mech Eng.2026; 26: 100. https://doi.org/10.1007/s43452-026-01491-9.10.1007/s43452-026-01491-9 ↗
11. Aiza I, Baldi C, de la Vega FM, et al. Effects of build orientation and inclined features on physical, microstructural and mechanical properties of powder bed fusion additively manufactured metallic parts. Prog Mater Sci. 2024;101357. https://doi.org/10.1016/j.pmatsci.2024.101357.10.1016/j.pmatsci.2024.101357 ↗
12. Wu D, Xu Y, Li W, et al. Significant improvement of mechanical properties of cold-spray-additive manufactured FeCoNiCrMn high-entropy alloy via post-annealing. Mater Charact. 2023;206:113350. https://doi.org/10.1016/j.matchar.2023.113350.10.1016/j.matchar.2023.113350 ↗
13. Lin H, Li Z, Fu M, et al. Ultrasonic rolling-enhanced additive manufacturing of IN718 superalloy: microstructural refinement and mechanical property improvement through variable power modulation. Additive Manuf. 2025;104891. https://doi.org/10.1016/j.addma.2025.104891.10.1016/j.addma.2025.104891 ↗
14. Zhang Z, Wan L, Meng X, et al. Robotic wire-based friction stir additive manufacturing. Additive Manuf. 2024;88:104261. https://doi.org/10.1016/j.addma.2024.104261.10.1016/j.addma.2024.104261 ↗
15. Palya NI, Fraser K, Zhu N, et al. Microstructure prediction from smooth particle hydrodynamics process simulations of additive friction stir deposition. Metall Mater Trans A. 2024;55(9):3601–16. https://doi.org/10.1007/s11661-024-07499-1.10.1007/s11661-024-07499-1 ↗
16. Emun Y, Robinson T, Jordon JB, et al. Influence of Additive Friction Stir Deposition on Microstructure and Corrosion Properties of Magnesium Alloy AZ31B. Metall Mater Trans A. 2025;56(2):752–63. https://doi.org/10.1007/s11661-024-07662-8.10.1007/s11661-024-07662-8 ↗
17. Razmjoo H, Mirsalehi SE, Abbasi-Nahr M, et al. Microstructure, corrosion, and tribological performance of multilayered cylindrical AA5083 parts fabricated by modified friction stir deposition–Additive manufacturing. Mater Charact. 2025;221:114777. https://doi.org/10.1016/j.matchar.2025.114777.10.1016/j.matchar.2025.114777 ↗
18. Liu FC, Feng AH, Pei X, et al. Friction stir based welding, processing, extrusion and additive manufacturing. Prog Mater Sci. 2024;101330. https://doi.org/10.1016/j.pmatsci.2024.101330.10.1016/j.pmatsci.2024.101330 ↗
19. Liu I, Bor TC, Allison PG, et al. Additive friction stir deposition of aluminum alloys: A critical review. Mater Design. 2025. https://doi.org/10.1016/j.matdes.2025.114543. 114543.10.1016/j.matdes.2025.114543 ↗
20. Chen L, Lu L, Zhu L, et al. Microstructure evolution and mechanical properties of multilayer AA6061 alloy fabricated by additive friction stir deposition. Metall Mater Trans A. 2024;55(4):1049–64. https://doi.org/10.1007/s11661-024-07303-0.10.1007/s11661-024-07303-0 ↗
21. Qiao Q, Zhou M, Gong X, et al. In-situ monitoring of additive friction stir deposition of AA6061: Effect of layer thickness on the microstructure and mechanical properties. Additive Manuf. 2024;84:104141. https://doi.org/10.1016/j.addma.2024.104141.10.1016/j.addma.2024.104141 ↗
22. Zhang M, Jiang T, Xie Y, et al. Microstructure evolution and strengthening mechanisms of an additive friction stir deposited multi-layer Al-Mg-Sc-Zr alloy. J Alloys Compd. 2024;1004:175783. https://doi.org/10.1016/j.jallcom.2024.175783.10.1016/j.jallcom.2024.175783 ↗
23. Shen Z, Zhang M, Li D, et al. Microstructure evolution and mechanical properties of single-layer multipass overlapped Al-Mg-Mn-Sc-Zr alloy fabricated via additive friction stir deposition. JOM. 2023;75(10):4242–53. https://doi.org/10.1007/s11837-023-06057-1.10.1007/s11837-023-06057-1 ↗
24. Zavari S, Bagheri E, Ding H, et al. The influence of additive friction stir deposition process on mechanical properties, corrosion resistance, and electrical conductivity of Al5086-H32 alloy. Progress Additive Manuf. 2025. https://doi.org/10.1007/s40964-025-01072-x.10.1007/s40964-025-01072-x ↗
25. Abbasi–Nahr M, Mirsalehi SE. Additive friction stir deposition of AA5083/MoS2-diamond hybrid nanocomposites: Investigating their metallurgical, mechanical, tribological, and electrochemical characteristics, and process-structure-property relationships. J Alloys Compd. 2025;1013:178553. https://doi.org/10.1016/j.jallcom.2025.178553.10.1016/j.jallcom.2025.178553 ↗
26. Li Y, Yang B, Zhang M, et al. The corrosion behavior and mechanical properties of 5083 Al-Mg alloy manufactured by additive friction stir deposition. Corros Sci. 2023;213:110972. https://doi.org/10.1016/j.corsci.2023.110972.10.1016/j.corsci.2023.110972 ↗
27. Koju RK, Mishin Y. Atomistic study of grain-boundary segregation and grain-boundary diffusion in Al-Mg alloys. Acta Mater. 2020;201:596–603. https://doi.org/10.1016/j.actamat.2020.10.029.10.1016/j.actamat.2020.10.029 ↗
28. Patel SK, Singh S, Shi L, et al. Synergistic enhancement of bio-tribological properties in HA-, ZrO2-, and Y2O3-reinforced AZ91D surface composites via friction stir processing: a comparative analysis. Arch Civ Mech Eng. 2026;26:18. https://doi.org/10.1007/s43452-025-01389-y.10.1007/s43452-025-01389-y ↗
29. Mishra RS, Ma DZ. Friction stir welding and processing. Materials science and engineering: R: reports. 2005; 50(1–2):1–78. https://doi.org/10.1016/j.mser.2005.07.00110.1016/j.mser.2005.07.001 ↗
30. Huang Y, Liu Q, Zhang K, et al. Investigation of three-dimensional forces during additive friction stir deposition—How could force signals reveal the deposition quality? Int J Mach Tools Manuf. 2025;204:104234. https://doi.org/10.1016/j.ijmachtools.2024.104234.10.1016/j.ijmachtools.2024.104234 ↗
31. Kinser RP, Zhu N, Williams MB, et al. Effects on microstructure and mechanical properties of aluminum alloy 6061 processed via underwater additive friction stir deposition. J Manuf Process. 2025;134:932–42. https://doi.org/10.1016/j.jmapro.2025.01.006.10.1016/j.jmapro.2025.01.006 ↗
32. Zhilyaev AP, Langdon TG. Using high-pressure torsion for metal processing: Fundamentals and applications. Prog Mater Sci. 2008;53(6):893–979. https://doi.org/10.1016/j.pmatsci.2008.03.002.10.1016/j.pmatsci.2008.03.002 ↗
33. Yi G, Sun B, Poplawsky JD, Zhu Y, Free ML. Investigation of pre-existing particles in Al 5083 alloys. J Alloys Compd. 2018;740:461–9. https://doi.org/10.1016/j.jallcom.2017.12.329.10.1016/j.jallcom.2017.12.329 ↗
34. Liu S, Wang X, Tao Y, et al. Enhanced corrosion resistance of 5083 aluminum alloy by refining with nano-CeB6/Al inoculant. Appl Surf Sci. 2019;484:403–8. https://doi.org/10.1016/j.apsusc.2019.03.283.10.1016/j.apsusc.2019.03.283 ↗
35. Tang W, Yang X, Luo T, et al. Precipitation behavior and strengthening-toughening mechanism of additive friction stir-deposited Al–Mg–Si–Cu alloy. Additive Manuf. 2023;76:103785. https://doi.org/10.1016/j.addma.2023.103785.10.1016/j.addma.2023.103785 ↗
36. Perry ME, Griffiths RJ, Garcia D, et al. Morphological and microstructural investigation of the non-planar interface formed in solid-state metal additive manufacturing by additive friction stir deposition. Additive Manuf. 2020;35:101293. https://doi.org/10.1016/j.addma.2020.101293.10.1016/j.addma.2020.101293 ↗
37. Paliwal D, Bharti P, Yadava M, et al. Integrating experimental and computational approaches to unveil processing-microstructure-property relationships in additive friction stir deposited AA6061 alloy. Mater Sci Eng: A. 2025;148657. https://doi.org/10.1016/j.msea.2025.148657.10.1016/j.msea.2025.148657 ↗
38. Mirowska A, Szkodo M, Pawłowski Ł, et al. Influence of friction stir welding parameters on mechanical and electrochemical performance of EN AW-6082-T651 alloy butt joints. Arch Civ Mech Eng. 2025;25:290. https://doi.org/10.1007/s43452-025-01336-x.10.1007/s43452-025-01336-x ↗
39. Pouraliakbar H, Jandaghi MR, Gallerneault M, et al. Strain rate-induced crystallographic texture development in tensile deformation of a rapidly solidified thin-strip cast AA5182 Al-Mg alloy. Mater Sci Engineering: A. 2025;945:149010. https://doi.org/10.1016/j.msea.2025.149010.10.1016/j.msea.2025.149010 ↗
40. Mao Y, Chen H, Xiong J. In-situ microalloying of Al-Cu-Sc alloy manufactured by beam oscillating wire laser directed energy deposition: Grain refinement and properties improvement. Additive Manuf. 2024;93:104419. https://doi.org/10.1016/j.addma.2024.104419.10.1016/j.addma.2024.104419 ↗
41. Nie JF, Muddle BC. Strengthening of an Al–Cu–Sn alloy by deformation-resistant precipitate plates. Acta Mater. 2008;56(14):3490–501. https://doi.org/10.1016/j.actamat.2008.03.028.10.1016/j.actamat.2008.03.028 ↗
42. Jiang B, Wang H, Yi D, et al. Effect of Ag addition on the age hardening and precipitation behavior in an Al-Cu-Li-Mg-Zn-Mn-Zr alloy. Mater Charact. 2020;162:110184. https://doi.org/10.1016/j.matchar.2020.110184.10.1016/j.matchar.2020.110184 ↗
43. Mishra S, Yadava M, Kulkarni KN, et al. A new phenomenological approach for modeling strain hardening behavior of face centered cubic materials. Acta Mater. 2019;178:99–113. https://doi.org/10.1016/j.actamat.2019.08.002.10.1016/j.actamat.2019.08.002 ↗
44. Jiang W, Guo X, Deng Y. Anisotropic response in mechanical behavior of additively manufactured Al–Mn-Sc alloys by in-situ EBSD tensile tests. Mater Sci Engineering: A. 2022;858:144155. https://doi.org/10.1016/j.msea.2022.144155.10.1016/j.msea.2022.144155 ↗
45. Chen P, Mao SC, Liu Y, et al. In-situ EBSD study of the active slip systems and lattice rotation behavior of surface grains in aluminum alloy during tensile deformation. Mater Sci Engineering: A. 2013;580:114–24. https://doi.org/10.1016/j.msea.2013.05.046.10.1016/j.msea.2013.05.046 ↗
46. Fonda RW, Bingert JF. Texture variations in an aluminum friction stir weld. Scripta Mater. 2007;57(11):1052–5. https://doi.org/10.1016/j.scriptamat.2007.06.068.10.1016/j.scriptamat.2007.06.068 ↗
47. Wang Z, Wang B, Li Z et al. Microstructure evolution and fatigue properties of additive friction stir deposited Al-Mg-Si alloy. J Alloys Compd. 2025:184430. https://doi.org/10.1016/j.jallcom.2025.18443010.1016/j.jallcom.2025.184430 ↗
48. Raturi M, Bhattacharya A. Microstructure and texture correlation of secondary heating assisted dissimilar friction stir welds of aluminum alloys. Mater Sci Engineering: A. 2021;825:141891. https://doi.org/10.1016/j.msea.2021.141891.10.1016/j.msea.2021.141891 ↗
49. Ghadimi H, Ding H, Emanet S, et al. Hardness distribution of Al2050 parts fabricated using additive friction stir deposition. Materials. 2023;16(3):1278. https://doi.org/10.3390/ma16031278.10.3390/ma16031278 ↗
50. Mason CJ, Rodriguez RI, Avery DZ, et al. Process-structure-property relations for as-deposited solid-state additively manufactured high-strength aluminum alloy. Additive Manuf. 2021;40:101879. https://doi.org/10.1016/j.addma.2021.101879.10.1016/j.addma.2021.101879 ↗
51. Shen Z, Zhang M, Li D, et al. Microstructural characterization and mechanical properties of AlMg alloy fabricated by additive friction stir deposition. International J Adv Manuf Technology. 2023;125(5):2733–41. https://doi.org/10.1007/s00170-023-10952-x.10.1007/s00170-023-10952-x ↗
52. Xu W, Xin YC, Zhang B, et al. Stress corrosion cracking resistant nanostructured Al-Mg alloy with low angle grain boundaries. Acta Mater. 2022;225:117607. https://doi.org/10.1016/j.actamat.2021.117607.10.1016/j.actamat.2021.117607 ↗
53. Zhou L, Hyer H, Chang J, et al. Microstructure, mechanical performance, and corrosion behavior of additively manufactured aluminum alloy 5083 with 0.7 and 1.0 wt% Zr addition. Mater Sci Engineering: A. 2021;823:141679. https://doi.org/10.1016/j.msea.2021.141679.10.1016/j.msea.2021.141679 ↗
54. Phillips BJ, Williamson CJ, Kinser RP, et al. Microstructural and mechanical characterization of additive friction stir-deposition of aluminum alloy 5083 effect of lubrication on material anisotropy. Materials. 2021;14(21):6732. https://doi.org/10.3390/ma14216732.10.3390/ma14216732 ↗
55. Engler O, Miller-Jupp S. Control of second-phase particles in the Al-Mg-Mn alloy AA 5083. J Alloys Compd. 2016;689:998–1010. https://doi.org/10.1016/j.jallcom.2016.08.070.10.1016/j.jallcom.2016.08.070 ↗
56. She X, Jiang X, Zhang R, et al. Study on microstructure and fracture characteristics of 5083 aluminum alloy thick plate. J Alloys Compd. 2020;825:153960. https://doi.org/10.1016/j.jallcom.2020.153960.10.1016/j.jallcom.2020.153960 ↗
57. Hu Y, Shi L, Xiao Y, et al. Synergistic influence of rotational and travel speeds on microstructure and property in AlMg alloy via Additive Friction Stir Deposition. Mater Charact. 2025;115617. https://doi.org/10.1016/j.matchar.2025.115617.10.1016/j.matchar.2025.115617 ↗
58. Qiao Q, Wang L, Tam CW, et al. In-situ monitoring of additive friction stir deposition of AA6061: Effect of rotation speed on the microstructure and mechanical properties. Mater Sci Engineering: A. 2024;902:146620. https://doi.org/10.1016/j.msea.2024.146620.10.1016/j.msea.2024.146620 ↗
59. Hahn GD, Knight KP, Gotawala N, et al. Additive friction stir deposition of AA7050 achieving forging-like tensile properties. Mater Sci Engineering: A. 2024;896:146268. https://doi.org/10.1016/j.msea.2024.146268.10.1016/j.msea.2024.146268 ↗
60. Kumar A, Shi L, Singh VP, et al. State-of-the-art review of additive friction stir deposition: microstructural evolution, machine learning applications, and future directions. Curr Opin Solid State Mater Sci. 2026;40:101243. https://doi.org/10.1016/j.cossms.2025.101243.10.1016/j.cossms.2025.101243 ↗
61. Patil SM, Krishna KM, Sharma S, et al. Thermo-mechanical process variables driven microstructure evolution during additive friction stir deposition of IN625. Additive Manuf. 2024;80:103958. https://doi.org/10.1016/j.addma.2024.103958.10.1016/j.addma.2024.103958 ↗
62. Andreau O, Gubicza J, Zhang NX, et al. Effect of short-term annealing on the microstructures and flow properties of an Al–1% Mg alloy processed by high-pressure torsion. Mater Sci Engineering: A. 2014;615:231–9. https://doi.org/10.1016/j.msea.2014.07.018.10.1016/j.msea.2014.07.018 ↗
63. Li Y, Teng J, Wang J, et al. Interfacial corrosion behavior of aluminum/steel joints prepared by solid-state additive manufacturing. Corros Sci. 2025;244:112650. https://doi.org/10.1016/j.corsci.2024.112650.10.1016/j.corsci.2024.112650 ↗
64. Gong X, Li Y, Nie Y, et al. Corrosion behaviour of CoCrMo alloy fabricated by electron beam melting. Corros Sci. 2018;139:68–75. https://doi.org/10.1016/j.corsci.2018.04.033.10.1016/j.corsci.2018.04.033 ↗
65. Qiao Q, Guo D, Qian HC, et al. In-situ monitoring of temperature, force, and torque during additive friction deposition of AA6061: Influence of underwater cooling. Materialia. 2025;102507. https://doi.org/10.1016/j.mtla.2025.102507.10.1016/j.mtla.2025.102507 ↗
66. Zheng Q, Wu J, Jiang H, et al. Effect of micro-alloying element La on corrosion behavior of Al-Mg-Si alloys. Corros Sci. 2021;179:109113. https://doi.org/10.1016/j.corsci.2020.109113.10.1016/j.corsci.2020.109113 ↗
67. Li N, Dong C, Man C, et al. Insight into the localized strain effect on micro-galvanic corrosion behavior in AA7075-T6 aluminum alloy. Corros Sci. 2021;180:109174. https://doi.org/10.1016/j.corsci.2020.109174.10.1016/j.corsci.2020.109174 ↗
68. Ma Y, Dong H, Li P, et al. Galvanic corrosion of AA5052/304SS welded joint with Zn-based filler metal in marine engineering. Corros Sci. 2023;211:110912. https://doi.org/10.1016/j.corsci.2022.110912.10.1016/j.corsci.2022.110912 ↗
69. Kharitonov DS, Dobryden I, Sefer B, Ryl J, et al. Surface and corrosion properties of AA6063-T5 aluminum alloy in molybdate-containing sodium chloride solutions. Corros Sci. 2020;171:108658. https://doi.org/10.1016/j.corsci.2020.108658.10.1016/j.corsci.2020.108658 ↗
70. L’Haridon-Quaireau S, Laot M, Colas K, et al. Effects of temperature and pH on uniform and pitting corrosion of aluminium alloy 6061-T6 and characterisation of the hydroxide layers. J Alloys Compd. 2020;833:155146. https://doi.org/10.1016/j.jallcom.2020.155146.10.1016/j.jallcom.2020.155146 ↗