journal article·2026-07-08Open access

Response assessment of buckling-restrained braces using novel modified core-spring finite element model

Hesam Azizi, Jamal Ahmadi, Farzin Kazemi

Abstract

Abstract This study introduces a computationally efficient numerical method for simulating the mechanical behavior of buckling restrained braces (BRBs). The proposed modified core spring model (MCSM), implemented in ABAQUS, significantly reduces the need for detailed finite element modeling while preserving high predictive accuracy. The method captures essential features of BRB behavior across various conventional and advanced configurations by employing an optimized spring based representation of the yielding core. Key aspects of the model formulation, including constitutive behavior, stiffness calibration, and optimal spring spacing, are evaluated through targeted parametric analyses. Validation against experimental results demonstrates that MCSM reproduces cyclic response characteristics with maximum errors within approximately 4–7% across eight standard performance indices, while the most accurate cases exhibit errors below 1%. Additionally, the method significantly reduces computational time compared to full‑scale finite element (FE) models and minimizes convergence issues. These findings confirm that the MCSM can provide an effective and practical analytical tool for BRB simulation, offering detailed response predictions with substantially lower computational demand.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Seismic Performance and Analysis · Structural Load-Bearing Analysis · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Dehghani M, Tremblay R. Design and full-scale experimental evaluation of a seismically endurant steel buckling‐restrained brace system. Earthq Eng Struct Dyn. 2018;47(1):105–29. https://doi.org/10.1002/eqe.2941.10.1002/eqe.2941 ↗
2. Mojiri S, Mortazavi P, Kwon OS, Christopoulos C. Seismic response evaluation of a five-story buckling‐restrained braced frame using multi‐element pseudo‐dynamic hybrid simulations. Earthq Eng Struct Dynamics. 2021;50(12):3243–65. https://doi.org/10.1002/eqe.3508.10.1002/eqe.3508 ↗
3. Tong JZ, Guo YL. Numerical investigations on elastic buckling and hysteretic behavior of steel angles assembled buckling-restrained braces. J Constr Steel Res. 2018;144:21–39. https://doi.org/10.1016/j.jcsr.2018.01.015.10.1016/j.jcsr.2018.01.015 ↗
4. Asgarkhani N, Yakhchalian M, Mohebi B. Evaluation of approximate methods for estimating residual drift demands in BRBFs. Eng Struct. 2020;224:110849. https://doi.org/10.1016/j.engstruct.2020.110849.10.1016/j.engstruct.2020.110849 ↗
5. Abedini H, Hoseini Vaez SR, Zarrineghbal A. Optimum design of buckling-restrained braced frames. Structures. 2020;25:99–112. https://doi.org/10.1016/j.istruc.2020.03.004.10.1016/j.istruc.2020.03.004 ↗
6. Farhat F, Nakamura S, Takahashi K. Application of genetic algorithm to optimization of buckling restrained braces for seismic upgrading of existing structures. Comput Struct. 2009;87:110–9. https://doi.org/10.1016/j.compstruc.2008.08.002.10.1016/j.compstruc.2008.08.002 ↗
7. Güneyisi EM. Seismic reliability of steel moment resisting framed buildings retrofitted with buckling restrained braces. Earthq Eng Struct Dyn. 2012;41(5):853–74. https://doi.org/10.1002/eqe.1161.10.1002/eqe.1161 ↗
8. Guerrero H, Ji T, Escobar JA, Teran-Gilmore A. Effects of buckling-restrained braces on reinforced concrete precast models subjected to shaking table excitation. Eng Struct. 2018;163:294–310. https://doi.org/10.1016/j.engstruct.2018.02.055.10.1016/j.engstruct.2018.02.055 ↗
9. Velasco L, Hospitaler A, Guerrero H. Optimal design of the seismic retrofitting of reinforced concrete framed structures using BRBs. Bull Earthq Eng. 2022;20(10):5135–60.10.1007/s10518-022-01394-z ↗
10. Leyva H, Bojórquez J, Bojórquez E, Reyes-Salazar A, Carrillo J, López-Almansa F. Multi-objective seismic design of BRBs-reinforced concrete buildings using genetic algorithms. Struct Multidiscip Optim. 2021;64(4):2097–112.10.1007/s00158-021-02965-5 ↗
11. Zhu Y, Wang J, Cai X, Xu Z, Wen Y. Cyclic behavior of ellipse and peanut-shaped perforated buckling-restrained braces. Eng Struct. 2023;291:116432. https://doi.org/10.1016/j.engstruct.2023.116432.10.1016/j.engstruct.2023.116432 ↗
12. Bai J, Chen H, Ma G, Duan L. Development of a four-tube-assembled buckling-restrained brace for convenient post-earthquake damage examination and replacement. J Building Eng. 2022;50:104209. https://doi.org/10.1016/j.jobe.2022.104209.10.1016/j.jobe.2022.104209 ↗
13. Mirtaheri M, Gheidi A, Zandi AP, Alanjari P, Samani HR. Experimental optimization studies on steel core lengths in buckling restrained braces. J Constr Steel Res. 2011;67(8):1244–53. https://doi.org/10.1016/j.jcsr.2011.03.004.10.1016/j.jcsr.2011.03.004 ↗
14. Sun J, Pan P, Wang H. Development and experimental validation of an assembled steel double-stage yield buckling restrained brace. J Constr Steel Res. 2018;145:330–40. https://doi.org/10.1016/j.jcsr.2018.03.003.10.1016/j.jcsr.2018.03.003 ↗
15. Sitler B, Takeuchi T, Matsui R, Terashima M, Terazawa Y. Experimental investigation of a multistage buckling-restrained brace. Eng Struct. 2020;213:110482. https://doi.org/10.1016/j.engstruct.2020.110482.10.1016/j.engstruct.2020.110482 ↗
16. Jia LJ, Ge H, Maruyama R, Shinohara K. Development of a novel high-performance all-steel fish-bone shaped buckling-restrained brace. Eng Struct. 2017;138:105–19. https://doi.org/10.1016/j.engstruct.2017.02.006.10.1016/j.engstruct.2017.02.006 ↗
17. Avci-Karatas C, Celik OC, Yalcin C. Experimental investigation of aluminum alloy and steel core buckling restrained braces (BRBs). Int J Steel Struct. 2018;18:650–73. https://doi.org/10.1007/s13296-018-0025-y.10.1007/s13296-018-0025-y ↗
18. Kazemi F, Jankowski R. Seismic performance evaluation of steel buckling-restrained braced frames including SMA materials. J Constr Steel Res. 2023;201:107750. https://doi.org/10.1016/j.jcsr.2022.107750.10.1016/j.jcsr.2022.107750 ↗
19. Wang Y, Jiang T, Qiu C, Zhang A, Liu J, Du X. Experimental tests and numerical simulations of miniature buckling-restrained braces using iron-shape memory alloy bar. Smart Mater Struct. 2024;33(2):025013. https://doi.org/10.1088/1361-665X/ad1c3e.10.1088/1361-665X/ad1c3e ↗
20. Azizi H, Ahmadi J, Eghbali M. Study on self-centering mechanism of different yield strength hybrid buckling restrained braces. J Constr Steel Res. 2023;210:108068. https://doi.org/10.1016/j.jcsr.2023.108068.10.1016/j.jcsr.2023.108068 ↗
21. Azizi H, Ahmadi J. Investigating the seismic behavior of low-rise steel frames equipped with dual-core self-centering buckling-restrained brace. Soil Dyn Earthq Eng. 2024;185:108905. https://doi.org/10.1016/j.soildyn.2024.108905.10.1016/j.soildyn.2024.108905 ↗
22. Zhao J, Wu B, Li W, Ou J. Local buckling behavior of steel angle core members in buckling-restrained braces: cyclic tests, theoretical analysis, and design recommendations. Eng Struct. 2014;66:129–45. https://doi.org/10.1016/j.engstruct.2014.02.008.10.1016/j.engstruct.2014.02.008 ↗
23. Dusicka P, Tinker J. Global restraint in ultra-lightweight buckling-restrained braces. J Compos Constr. 2013;17(1):139–50. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000320.10.1061/(ASCE)CC.1943-5614.0000320 ↗
24. Wang CL, Liu Y, Zhou L. Experimental and numerical studies on hysteretic behavior of all-steel bamboo-shaped energy dissipaters. Eng Struct. 2018;165:38–49. https://doi.org/10.1016/j.engstruct.2018.02.078.10.1016/j.engstruct.2018.02.078 ↗
25. Wang CL, Chen Q, Zeng B, Meng S. A novel brace with partial buckling restraint: An experimental and numerical investigation. Eng Struct. 2017;150:190–202. https://doi.org/10.1016/j.engstruct.2017.06.031.10.1016/j.engstruct.2017.06.031 ↗
26. Mortezagholi MH, Zahrai SM. Analytical and numerical studies on reducing lateral restraints in conventional & all steel buckling restrained braces. J Build Eng. 2020;32:101513. https://doi.org/10.1016/j.jobe.2020.101513.10.1016/j.jobe.2020.101513 ↗
27. Qu B, Liu X, Hou H, Qiu C, Hu D. Testing of buckling-restrained braces with replaceable steel angle fuses. J Struct Eng. 2018;144(3):04018001. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001985.10.1061/(ASCE)ST.1943-541X.0001985 ↗
28. Wu S, He H, Chen Y, Chen J. Calculation method of time-variant additional damping ratio and bi-objective design of RC frame with BRBs. Structures. 2021;33:2546–58. https://doi.org/10.1016/j.istruc.2021.06.025.10.1016/j.istruc.2021.06.025 ↗
29. Güneyisi EM, Tunca O, Azez I. Nonlinear dynamic response of reinforced concrete building retrofitted with buckling restrained braces. Earthquakes Struct. 2015;8(6):1349. https://doi.org/10.12989/eas.2015.8.6.1349.10.12989/eas.2015.8.6.1349 ↗
30. Yuan Y, Qing Y, Wang CL, Lin X, Zhu M. Development and experimental validation of a partially buckling-restrained brace with dual-plate cores. J Constr Steel Res. 2021;187:106992. https://doi.org/10.1016/j.jcsr.2021.106992.10.1016/j.jcsr.2021.106992 ↗
31. Cucuzza R, Domaneschi M, Greco R, Marano GC. Numerical models comparison for fluid-viscous dampers: performance investigations through genetic algorithm. Comput Struct. 2023;288:107122. https://doi.org/10.1016/j.compstruc.2023.107122.10.1016/j.compstruc.2023.107122 ↗
32. Cucuzza R, Londoño S, Domaneschi M, Greco R, Marano GC. High damping rubber bearings: optimal models evaluation considering production variability. Structures. 2025;73:108355. https://doi.org/10.1016/j.istruc.2025.108355.10.1016/j.istruc.2025.108355 ↗
33. Chou CC, Liu JH. Frame and brace action forces on steel corner gusset plate connections in buckling-restrained braced frames. Earthq Spectra. 2012;28(2):531–51.10.1193/1.4000007 ↗
34. Chou CC, Chen PJ. Compressive behavior of central gusset plate connections for a buckling-restrained braced frame. J Constr Steel Res. 2009;65(5):1138–48. https://doi.org/10.1016/j.jcsr.2008.11.004.10.1016/j.jcsr.2008.11.004 ↗
35. Westeneng B (2016) Buckling behavior of gusset plates in buckling-restrained braced frames. Master of Engineering thesis, University of Canterbury
36. Zsarnoczay A (2013). Experimental and numerical investigation of buckling restrained braced frames for Eurocode conform design procedure development (Doctoral dissertation, Budapest University of Technology and Economics (Hungary)).
37. Budaházy V, Dunai L. Parameter-refreshed Chaboche model for mild steel cyclic plasticity behaviour. Periodica Polytech Civil Eng. 2013;57(2):139–55. https://doi.org/10.3311/PPci.7170.10.3311/PPci.7170 ↗
38. Budaházy V (2015). Uniaxial cyclic steel behavior and model for dissipative structures (Doctoral dissertation, Budapest University of Technology and Economics (Hungary))
39. Zub CI, Stratan A, Dubina D. Prequalification of a set of buckling restrained braces: Part II–numerical simulations. Steel Compos Struct Int J. 2020;34(4):561–80.
40. Rahnavard R, Naghavi M, Aboudi M, Suleiman M. Investigating modeling approaches of buckling-restrained braces under cyclic loads. Case Stud Constr Mater. 2018;8:476–88. https://doi.org/10.1016/j.cscm.2018.04.002.10.1016/j.cscm.2018.04.002 ↗
41. Azizi H, Eghbali M, Ahmadi J. Numerical Investigation on the efficiency of self-centering two-yield buckling restrained brace on low-rise steel frames. Int J Civil Eng. 2024. https://doi.org/10.1007/s40999-024-01032-6.10.1007/s40999-024-01032-6 ↗
42. Azizi H, Ahmadi J. Seismic performance evaluation of two-and three-story steel frames with an upgraded hybrid buckling-restrained brace. Iran J Sci Technol Trans Civil Eng. 2024. https://doi.org/10.1007/s40996-024-01620-5.10.1007/s40996-024-01620-5 ↗
43. ABAQUS (2013) ABAQUS documentation. Hibbit, Kalsson & Sorensen Inc., Pawtucket RI
44. Ouyang X, Zhang Y, Ou X, Shi Y, Liu S, Fan J. Seismic fragility analysis of buckling-restrained brace-strengthened reinforced concrete frames using a performance-based plastic design method. Structures. 2022;43:338–50. https://doi.org/10.1016/j.istruc.2022.06.032.10.1016/j.istruc.2022.06.032 ↗
45. Zhou Y, Shao H, Cao Y, Lui EM. Application of buckling-restrained braces to earthquake-resistant design of buildings: a review. Eng Struct. 2021;246:112991. https://doi.org/10.1016/j.engstruct.2021.112991.10.1016/j.engstruct.2021.112991 ↗
46. Takeuchi T, Matsui R, Sitler B, MacRae G. (2017). State-of-art stability assessment of buckling-restrained braces including connections. In: 16th World Conference of Earthquake Engineering
47. Maekawa K, Okamura H. The deformational behavior and constitutive equation of concrete using the elasto-plastic and fracture model. J Fac Eng Univ Tokyo Ser B. 1983;37(2):253–328.
48. Uang CM, Nakashima M (2004). Steel buckling-restrained braced frames. Earthq Eng10.1201/9780203486245.ch16 ↗
49. Tabatabaei SAR, Mirghaderi SR, Hosseini A. Experimental and numerical developing of reduced length buckling-restrained braces. Eng Struct. 2014;77:143–60. https://doi.org/10.1016/j.engstruct.2014.07.034.10.1016/j.engstruct.2014.07.034 ↗
50. Heidary-Torkamani H, Maalek S. Conceptual numerical investigation of all-steel Tube-in-Tube buckling restrained braces. J Constr Steel Res. 2017;139:220–35. https://doi.org/10.1016/j.jcsr.2017.09.022.10.1016/j.jcsr.2017.09.022 ↗
51. Hoveidae N, Rafezy B. Overall buckling behavior of all-steel buckling restrained braces. J Constr Steel Res. 2012;79:151–8. https://doi.org/10.1016/j.jcsr.2012.07.022.10.1016/j.jcsr.2012.07.022 ↗
52. Hosseinzadeh S, Mohebi B. Seismic evaluation of all-steel buckling restrained braces using finite element analysis. J Constr Steel Res. 2016;119:76–84. https://doi.org/10.1016/j.jcsr.2015.12.014.10.1016/j.jcsr.2015.12.014 ↗
53. Paul SK, Sivaprasad S, Dhar S, Tarafder S. Key issues in cyclic plastic deformation: experimentation. Mech Mater. 2011;43(11):705–20. https://doi.org/10.1016/j.mechmat.2011.07.011.10.1016/j.mechmat.2011.07.011 ↗
54. Azizi H, Lehner P, Eghbali M, Ahmadi J, Badarloo B. Performance assessment of novel parallel double-stage yield buckling-restrained braces for seismic hazard mitigation. J Constr Steel Res. 2025;227:109389. https://doi.org/10.1016/j.jcsr.2025.109389.10.1016/j.jcsr.2025.109389 ↗
55. Jia LJ, Li RW, Xiang P, Zhou DY, Dong Y. Resilient steel frames installed with self-centering dual-steel buckling-restrained brace. J Constr Steel Res. 2018;149:95–104. https://doi.org/10.1016/j.jcsr.2018.07.001.10.1016/j.jcsr.2018.07.001 ↗
56. Piedrafita D, Cahis X, Simon E, Comas J. A new perforated core buckling restrained brace. Eng Struct. 2015;85:118–26. https://doi.org/10.1016/j.engstruct.2014.12.020.10.1016/j.engstruct.2014.12.020 ↗
57. Sugisawa M, Saeki E, Nakamura H, Hirabayashi R, Ichikawa Y, Ueki M, Hokari M. Development of earthquake-resistant, vibration control, and base isolation technology for building structures. Nippon Steel Tech Rep. 1995;66:37–46.
58. Shi G, Zhao H, Gao Y. Development of triple grades hybrid high-performance steel structure (TGHSS): concept and experiments. Eng Struct. 2022;266:114654. https://doi.org/10.1016/j.engstruct.2022.114654.10.1016/j.engstruct.2022.114654 ↗
59. Khoo HH, Tsai KC, Tsai CY, Tsai CY, Wang KJ. Bidirectional substructure pseudo-dynamic tests and analysis of a full‐scale two‐story buckling‐restrained braced frame. Earthq Eng Struct Dyn. 2016;45(7):1085–107. https://doi.org/10.1002/eqe.2696.10.1002/eqe.2696 ↗
60. ANSI/AISC 341–16. Specification for the structural steel buildings. Chicago: American Institute of Steel Construction (AISC); 2016
61. Azizi H, Ahmadi J. Mitigation of residual deformations in steel braced frames through an innovative Y-shaped hybrid buckling restrained braces. J Constr Steel Res. 2025;229:109533. https://doi.org/10.1016/j.jcsr.2025.109533.10.1016/j.jcsr.2025.109533 ↗
62. Azizi H. Numerical evaluation of cyclic and seismic performance of three-core buckling-resistant braces with partially re-centering properties. Structures. 2025;77:109078. https://doi.org/10.1016/j.istruc.2025.109078.10.1016/j.istruc.2025.109078 ↗
63. Azizi H, Ahmadi J, Kazemi F. Enhancing seismic resilience in steel frames with synchronized double-stage yield buckling-restrained braces. Soil Dyn Earthq Eng. 2025;198:109587. https://doi.org/10.1016/j.soildyn.2025.109587.10.1016/j.soildyn.2025.109587 ↗
64. Lin PC, Tsai KC, Wang KJ, Yu YJ, Wei CY, Wu AC, et al. Seismic design and hybrid tests of a full-scale three‐story buckling‐restrained braced frame using welded end connections and thin profile. Earthq Eng Struct Dyn. 2012;41(5):1001–20. https://doi.org/10.1002/eqe.1171.10.1002/eqe.1171 ↗
65. Azizi H, Ahmadi J, Nasserasadi K. Seismic performance of double-stage yield buckling restrained braced frames under mainshock-aftershock sequences. J Build Eng. 2025;113141. https://doi.org/10.1016/j.jobe.2025.113141.10.1016/j.jobe.2025.113141 ↗
66. Jia M, Lu D, Guo L, Sun L. Experimental research and cyclic behavior of buckling-restrained braced composite frame. J Constr Steel Res. 2014;95:90–105. https://doi.org/10.1016/j.jcsr.2013.11.021.10.1016/j.jcsr.2013.11.021 ↗