A synergistic use of waste glass and waste rhododendron in green foamed concrete: from fresh behavior to durability
Source abstract
Abstract
Abstract The increasing demand for sustainable construction materials has driven the exploration of alternative binders and aggregates in lightweight concrete systems. This study investigates the mechanical, physical, thermal, and durability performance of foamed concrete produced using waste glass powder as binder and rhododendron as aggregate. A total of 12 mix designs were prepared by adjusting the ratios of glass powder and rhododendron, while maintaining a consistent water-to-binder ratio and foam content across all samples. Fresh properties, including flow diameter and fresh unit weight, were evaluated, followed by tests on compressive and flexural strength at 7, 28, and 91 days. Physical characteristics such as oven-dry unit weight, porosity, water absorption, and thermal conductivity were determined. Durability assessments encompassed drying shrinkage, capillarity, high-temperature resistance (200–700 °C), freeze–thaw cycles (up to 100 cycles), and sulfate resistance after 60 days of exposure to MgSO₄. Microstructural changes were characterized using Scanning Electron Microscopy (SEM). The results indicate that the combined use of glass powder and rhododendron enhances thermal insulation and sustainability while maintaining sufficient mechanical performance. Mix G15R10 demonstrated the most balanced properties across all tests, combining low thermal conductivity and acceptable strength and durability. SEM analysis revealed microstructural densification with glass powder and highlighted the role of Rhododendron in modifying pore structure and interfacial zones. This research underscores the viability of incorporating organic waste and industrial by-products in foamed concrete as a sustainable solution for lightweight construction.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovations in Concrete and Construction Materials · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (90)
Show source-provided references
1. Afroughsabet V, Biolzi L, Ozbakkaloglu T. High-performance fiber-reinforced concrete: a review. J Mater Sci. 2016;51(14):6517–51.10.1007/s10853-016-9917-4 ↗
2. Khan M, Prasad J. Fly ash concrete subjected to thermal cyclic loads. Fatigue Fract Eng Mater Struct. 2010;33(5):276–83.10.1111/j.1460-2695.2010.01438.x ↗
3. Aı̈tcin P.-C. Cements of yesterday and today: Concrete of tomorrow. Cement Concrete Res 2000;30(9):349–1359.10.1016/S0008-8846(00)00365-3 ↗
4. Bayrak B, Öz A, Kavaz E, Kaplan G, Çelebi O, Alcan HG, et al. Synergic effect of some waste pozzolans on the mechanical and shielding properties of geopolymer concretes. Radiat Eff Defects Solids. 2023;178(7–8):855–84.10.1080/10420150.2023.2191849 ↗
5. Gao T, Shen L, Shen M, Chen F, Liu L, Gao L. Analysis on differences of carbon dioxide emission from cement production and their major determinants. J Clean Prod. 2015;103:160–70.10.1016/j.jclepro.2014.11.026 ↗
6. Aydın AC, Alcan HG, Bayrak B, Kılıç M, Maali M. The mechanical behavior of thermally enhanced polypropylene concrete. Constr Build Mater. 2020;262:120578.10.1016/j.conbuildmat.2020.120578 ↗
7. Suhendro B. Toward green concrete for better sustainable environment. Procedia Eng. 2014;95:305–20.10.1016/j.proeng.2014.12.190 ↗
8. Gencel O, Bayraktar OY, Kaplan G, Benli A, Martinez-Barrera G, Brostow W, et al. Characteristics of hemp fibre reinforced foam concretes with fly ash and Taguchi optimization. Construct Build Mater. 2021;294:123607.10.1016/j.conbuildmat.2021.123607 ↗
9. Amran M, Fediuk R, Vatin N, Huei Lee Y, Murali G, Ozbakkaloglu T, Klyuev S, Alabduljabber H. Fibre-reinforced foamed concretes: a review. Materials 2020;13(19): 4323.10.3390/ma13194323 ↗
10. Bodur B, Benli A, Bayraktar OY, Alcan HG, Kaplan G, Aydın AC. Impact of attapulgite and basalt fiber additions on the performance of pumice-based foam concrete: mechanical, thermal, and durability properties. Arch Civil Mech Eng. 2025;25(2):74.10.1007/s43452-025-01128-3 ↗
11. Fu Y, Wang X, Wang L, Li Y. Foam concrete: a state-of-the-art and state-of-the-practice review. Adv Mater Sci Eng. 2020;2020(1):6153602.10.1155/2020/6153602 ↗
12. Othman R, Putra Jaya R, Duraisamy Y, Sulaiman MA, Chong BW, Ghamari A. Efficiency of waste as cement replacement in foamed concrete—A review. Sustainability. 2023;15(6):5163.10.3390/su15065163 ↗
13. Ser M, Hussin A, Said A, Kohail M. Advancing sustainable production of eco-friendly foamed concrete: a comprehensive review on utilizing waste materials for cement reduction. Innov Infrastr Solut. 2024;9(7):257.10.1007/s41062-024-01549-8 ↗
14. Nguyen H, Jamali Moghadam M, Moayedi H. Agricultural wastes preparation, management, and applications in civil engineering: a review. J Mater Cycles Waste Manag 2019;21(5):1039–51.10.1007/s10163-019-00872-y ↗
15. Osial M, Pregowska A, Wilczewski S, Urbańska W, Giersig M. Waste management for green concrete solutions: a concise critical review. Recycling. 2022;7(3):37.10.3390/recycling7030037 ↗
16. Kumar V, Suri S, Prasad R, Gat Y, Sangma C, Jakhu H, et al. Bioactive compounds, health benefits and utilization of Rhododendron: a comprehensive review. Agricult Food Secur. 2019;8(1):6.10.1186/s40066-019-0251-3 ↗
17. Ahmad SA, Ahmed HU, Rafiq SK, Mahmood KOF, Rostam KJ, Jafer FS. A comprehensive exploration on the effect of waste glass powder as a partial replacement of cement in mortar: a review, analysis, and modeling investigation. Arab J Sci Eng. 2024;49(4):5721–48.10.1007/s13369-023-08432-1 ↗
18. Kushartomo W, Bali I, Sulaiman B. Mechanical behavior of reactive powder concrete with glass powder substitute. Procedia Eng. 2015;125:617–22.10.1016/j.proeng.2015.11.082 ↗
19. Baikerikar A, Mudalgi S, Ram VV. Utilization of waste glass powder and waste glass sand in the production of Eco-Friendly concrete. Construct Build Mater. 2023;377:131078.10.1016/j.conbuildmat.2023.131078 ↗
20. Chand G, Achintha M, Wang Y. Challenges and opportunities in using high percentage waste glass powder as cement replacement in concrete. Mater Circular Econ. 2025;7(1):19.10.1007/s42824-025-00173-w ↗
21. Deschamps J, Simon B, Tagnit-Hamou A, Amor B. Is open-loop recycling the lowest preference in a circular economy? Answering through LCA of glass powder in concrete. J Clean Prod. 2018;185:14–22.10.1016/j.jclepro.2018.03.021 ↗
22. Jani Y, Hogland W. Waste glass in the production of cement and concrete–A review. J Environ Chem Eng. 2014;2(3):1767–75.10.1016/j.jece.2014.03.016 ↗
23. Muhedin DA, Ibrahim RK. Effect of waste glass powder as partial replacement of cement & sand in concrete. Case Stud Construct Mater. 2023;19:e02512.
24. TS-EN-197–1, Cement - Part 1: Composition, specifications and conformity criteria for common cements, Turkish Standards Institution, Ankara Türkiye 2012.
25. ASTMC618, Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete, ASTM International, West Conshohocken 2023.
26. ASTMC33, Standard specification for concrete aggregates, ASTM International, West Conshohocken 2023.
27. ASTMC1437, Standard Test method for flow of hydraulic cement mortar, ASTM International, West Conshohocken 2020.
28. ASTMC642, Standard Test method for density, absorption, and voids in hardened concrete, ASTM International, West Conshohocken 2022.
29. ASTMC348, Standard Test method for flexural strength of hydraulic-cement mortars, ASTM International, West Conshohocken (2021).
30. ASTMC349, Standard test method for compressive strength of hydraulic-cement mortars (Using Portions of Prisms Broken in Flexure), ASTM International, West Conshohocken 2018.
31. TS-EN-1015–18, Methods of test for mortar for masonry - Part 18: Determination of water absorption coefficient due to capillary action of hardened mortar, Turkish Standards Institution, Ankara Türkiye 2004.
32. ASTME119, Standard test methods for fire tests of building construction and materials, ASTM International, West Conshohocken 2022.
33. ASTMC1012, Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution, ASTM International, West Conshohocken 2024.
34. ASTMC666–97, Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing, ASTM International, West Conshohocken 2017.
35. ASTMC596, Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement, ASTM International, West Conshohocken 2023.
36. ASTMD7984–16, Standard Test Method for Measurement of Thermal Effusivity of Fabrics Using a Modified Transient Plane Source (MTPS) Instrument, ASTM International, West Conshohocken 2021.
37. Du H, Tan KH. Properties of high volume glass powder concrete. Cement Concr Compos. 2017;75:22–9.10.1016/j.cemconcomp.2016.10.010 ↗
38. Kunhanandan Nambiar E, Ramamurthy K. Fresh state characteristics of foam concrete. J Mater Civil Eng 2008;20(2):111–117.10.1061/(ASCE)0899-1561(2008)20:2(111) ↗
39. Ibrahim K. Recycled waste glass powder as a partial replacement of cement in concrete containing silica fume and fly ash. Case Stud Construct Mater. 2021;15:e00630.
40. Grubeša IN, Marković B, Nyarko MH, Krstić H, Brdarić J, Filipović N, et al. Potential of fruit pits as aggregate in concrete. Construct Build Mater. 2022;345:128366.10.1016/j.conbuildmat.2022.128366 ↗
41. TS-EN-206-A2, Concrete - Specification, performance, production and conformity, Turkish Standards Institution, Ankara Türkiye 2021.
42. Othman R, Jaya RP, Muthusamy K, Sulaiman M, Duraisamy Y, Abdullah MMAB, et al. Relation between density and compressive strength of foamed concrete. Materials. 2021;14(11):2967.10.3390/ma14112967 ↗
43. Priyatham B, Lakshmayya M, Chaitanya D. Review on performance and sustainability of foam concrete, Mater Today: Proceedings 2023.10.1016/j.matpr.2023.04.080 ↗
44. Bayrak B, Bayraktar OY, Kara HO, Türkel İ, Özkan İGM, Yılmazoğlu MU, et al. Properties of green prepacked composites produced with slag cement: efficient recycling of micronized waste marble powder and waste wood sawdust. Arch Civil Mech Eng. 2025;25(4):170.10.1007/s43452-025-01231-5 ↗
45. Tomar R, Kishore K, Parihar HS, Gupta N. A comprehensive study of waste coconut shell aggregate as raw material in concrete. Mater Today: Proc 2021;44:437–43.10.1016/j.matpr.2020.09.754 ↗
46. Kearsley E, Wainwright P. The effect of porosity on the strength of foamed concrete. Cem Concr Res. 2002;32(2):233–9.10.1016/S0008-8846(01)00665-2 ↗
47. Deboucha W, Leklou N, Khelidj A, Oudjit MN. Hydration development of mineral additives blended cement using thermogravimetric analysis (TGA): Methodology of calculating the degree of hydration. Construct Build Mater. 2017;146:687–701.10.1016/j.conbuildmat.2017.04.132 ↗
48. Kanamarlapudi L, Jonalagadda KB, Jagarapu DCK, Eluru A. Different mineral admixtures in concrete: a review. SN Appl Sci. 2020;2(4):760.10.1007/s42452-020-2533-6 ↗
49. Bayraktar OY, Özel HB, Benli A, Yılmazoğlu MU, Türkel İ, Dal BB, et al. Sustainable foam concrete development: Enhancing durability and performance through pine cone powder and fly ash incorporation in alkali-activated geopolymers. Construct Build Mater. 2024;457:139422.10.1016/j.conbuildmat.2024.139422 ↗
50. Gołaszewski J, Klemczak B, Smolana A, Gołaszewska M, Cygan G, Mankel C, et al. Effect of foaming agent, binder and density on the compressive strength and thermal conductivity of ultra-light foam concrete. Buildings. 2022;12(8):1176.10.3390/buildings12081176 ↗
51. Jhatial AA, Goh WI, Sohu S, Mohamad N. Thermo-mechanical properties of various densities of foamed concrete incorporating polypropylene fibres. Arab J Sci Eng. 2020;45(10):8171–86.10.1007/s13369-020-04657-6 ↗
52. Gencel O, Bayraktar OY, Kaplan G, Arslan O, Nodehi M, Benli A, et al. Lightweight foam concrete containing expanded perlite and glass sand: Physico-mechanical, durability, and insulation properties. Construct Build Mater. 2022;320:126187.10.1016/j.conbuildmat.2021.126187 ↗
53. Sathiparan N, De Zoysa H. The effects of using agricultural waste as partial substitute for sand in cement blocks. J Build Eng. 2018;19:216–27.10.1016/j.jobe.2018.04.023 ↗
54. Falliano D, Gugliandolo E, De Domenico D, Ricciardi G. Experimental investigation on the mechanical strength and thermal conductivity of extrudable foamed concrete and preliminary views on its potential application in 3D printed multilayer insulating panels, RILEM International Conference on Concrete and Digital Fabrication, Springer, 2018, pp. 277–286.10.1007/978-3-319-99519-9_26 ↗
55. Raydan R, Khatib J, Jahami A, El Hamoui AK, Chamseddine F. Prediction of the mechanical strength of concrete containing glass powder as partial cement replacement material. Innov Infrastr Solut. 2022;7(5):311.10.1007/s41062-022-00896-8 ↗
56. Cabanillas Hernandez G, García Chumacero JM, Villegas Granados LM, Arriola Carrasco GG, Marín Bardales NH. Sustainable use of wood sawdust as a replacement for fine aggregate to improve the properties of concrete: a Peruvian case study. Innov Infrastr Solut. 2024;9(7):233.10.1007/s41062-024-01567-6 ↗
57. Ku H, Donald M, Cardona F, Trada M. Flexural properties of sawdust-reinforced epoxy composites post-cured in microwaves. J Compos Mater. 2012;46(22):2879–90.10.1177/0021998311433437 ↗
58. Qadir W, Ghafor K, Mohammed A. Characterizing and modeling the mechanical properties of the cement mortar modified with fly ash for various water-to-cement ratios and curing times. Adv Civil Eng. 2019;2019(1):7013908.10.1155/2019/7013908 ↗
59. Yusuf IT, Jimoh YA, Salami WA. An appropriate relationship between flexural strength and compressive strength of palm kernel shell concrete. Alex Eng J. 2016;55(2):1553–62.10.1016/j.aej.2016.04.008 ↗
60. Liu J, Zhuge Y, Ma X, Liu M, Liu Y, Wu X, et al. Physical and mechanical properties of expanded vermiculite (EV) embedded foam concrete subjected to elevated temperatures. Case Stud Construct Mater. 2022;16:e01038.
61. Schwarz N, Cam H, Neithalath N. Influence of a fine glass powder on the durability characteristics of concrete and its comparison to fly ash. Cement Concruct Compos. 2008;30(6):486–96.10.1016/j.cemconcomp.2008.02.001 ↗
62. Oppon JA, Adinyira E, Agyekum K. A bibliometric review of agricultural waste as coarse aggregates in sustainable concrete. Discover Civil Eng. 2025;2(1):127.10.1007/s44290-025-00286-w ↗
63. Rajkohila A, Prakash Chandar S, Ravichandran P. Influence of natural fiber derived from agricultural waste on durability and micro-morphological analysis of high-strength concrete. Buildings. 2023;13(7):1667.10.3390/buildings13071667 ↗
64. Abdollahnejad Z, Zhang Z, Wang H, Mastali M. Comparative study on the drying shrinkage and mechanical properties of geopolymer foam concrete incorporating different dosages of fiber, sand and foam agents. High Tech Concrete: Where Technology and Engineering Meet: Proceedings of the 2017 fib Symposium, held in Maastricht, The Netherlands, June 12–14, 2017, Springer, 2017, pp. 42–48.10.1007/978-3-319-59471-2_6 ↗
65. Nambiar EK, Ramamurthy K. Shrinkage behavior of foam concrete. J Mater Civ Eng. 2009;21(11):631–6.10.1061/(ASCE)0899-1561(2009)21:11(631) ↗
66. Shafigh P, Ghafari H, Mahmud HB, Jumaat MZ. A comparison study of the mechanical properties and drying shrinkage of oil palm shell and expanded clay lightweight aggregate concretes. Mater Des. 2014;60:320–7.10.1016/j.matdes.2014.04.001 ↗
67. Adesina A, Das S. Influence of glass powder on the durability properties of engineered cementitious composites. Construct Build Mater. 2020;242:118199.10.1016/j.conbuildmat.2020.118199 ↗
68. Maghfouri M, Shafigh P, Alimohammadi V, Doroudi Y, Aslam M. Appropriate drying shrinkage prediction models for lightweight concrete containing coarse agro-waste aggregate. J Build Eng. 2020;29:101148.10.1016/j.jobe.2019.101148 ↗
69. Khan M. Factors affecting the thermal properties of concrete and applicability of its prediction models. Build Environ. 2002;37(6):607–14.10.1016/S0360-1323(01)00061-0 ↗
70. Jhatial AA, Goh WI, Rind TA, Kumar A. Thermal performance simulation of eco-friendly lightweight foamed concrete incorporating palm oil fuel ash and eggshell powder using ABAQUS. Silicon. 2022;14(3):1263–83.10.1007/s12633-020-00907-2 ↗
71. Liu MYJ, Alengaram UJ, Jumaat MZ, Mo KH. Evaluation of thermal conductivity, mechanical and transport properties of lightweight aggregate foamed geopolymer concrete. Energy Build. 2014;72:238–45.10.1016/j.enbuild.2013.12.029 ↗
72. Maaze MR, Shrivastava S. Design development of coal-based fly ash geopolymer brick using orthogonal array design of experiment. Int J Coal Prep Util. 2024;44(8):1186–210.10.1080/19392699.2023.2270922 ↗
73. Oriola K, Raheem A, Ogundele A. Investigation of compressive strength and thermal properties of corn cob ash cement concrete. Mater Today Proceedings. 2023;86:128–33.10.1016/j.matpr.2023.04.520 ↗
74. Ahmad MR, Chen B. Influence of type of binder and size of plant aggregate on the hygrothermal properties of bio-concrete. Construct Build Mater. 2020;251:118981.10.1016/j.conbuildmat.2020.118981 ↗
75. Mydin MAO, Wang Y. Mechanical properties of foamed concrete exposed to high temperatures. Construct Build Mater. 2012;26(1):638–54.10.1016/j.conbuildmat.2011.06.067 ↗
76. Kim W, Choi H, Lee T. Residual compressive strength prediction model for concrete subject to high temperatures using ultrasonic pulse velocity. Materials. 2023;16(2):515.10.3390/ma16020515 ↗
77. Xi H, Yao Y, Sun Y, Mobasher B, Liu Y, Ma H. Compressive and thermal properties of foamed concrete at high temperature. J Sustain Cement-Based Mater. 2022;11(6):353–69.10.1080/21650373.2021.1961639 ↗
78. Nodehi M, Mohamad Taghvaee V. Sustainable concrete for circular economy: a review on use of waste glass. Glass Struct Eng. 2022;7(1):3–22.10.1007/s40940-021-00155-9 ↗
79. Bayraktar OY, Tobbala DE, Turkoglu M, Kaplan G, Tayeh BA. Hemp fiber reinforced one-part alkali-activated composites with expanded perlite: Mechanical properties, microstructure analysis and high-temperature resistance. Construct Build Mater. 2023;363:129716.10.1016/j.conbuildmat.2022.129716 ↗
80. Shah I, Jing L, Fei ZM, Yuan YS, Farooq MU, Kanjana N. A review on chemical modification by using sodium hydroxide (NaOH) to investigate the mechanical properties of sisal, coir and hemp fiber reinforced concrete composites. J Nat Fibers. 2022;19(13):5133–51.10.1080/15440478.2021.1875359 ↗
81. Bayraktar OY, Soylemez H, Kaplan G, Benli A, Gencel O, Turkoglu M. Effect of cement dosage and waste tire rubber on the mechanical, transport and abrasion characteristics of foam concretes subjected to H2SO4 and freeze–thaw. Construct Build Mater. 2021;302:124229.10.1016/j.conbuildmat.2021.124229 ↗
82. Sun C, Chen L, Xiao J, Zuo J, Wu H. Effects of eco powders from solid waste on freeze-thaw resistance of mortar. Construct Build Mater. 2022;333:127405.10.1016/j.conbuildmat.2022.127405 ↗
83. Moghadam AS, Roshan AMG, Omidinasab F. Utilization of agricultural wastes as fiber, binder and aggregates of geopolymer mortars: application of Taguchi method for strength and durability optimization. J Build Eng. 2023;75:106906.10.1016/j.jobe.2023.106906 ↗
84. Capraro APB, Braga V, de Medeiros MHF, Hoppe Filho J, Bragança MO, Portella KF, et al. Internal attack by sulphates in cement pastes and mortars dosed with different levels of pyrite. J Build Pathol Rehabilit. 2017;2(1):7.10.1007/s41024-017-0026-9 ↗
85. Nosouhian F, Mostofinejad D, Hasheminejad H. Influence of biodeposition treatment on concrete durability in a sulphate environment. Biosys Eng. 2015;133:141–52.10.1016/j.biosystemseng.2015.03.008 ↗
86. An Q, Pan H, Zhao Q, Du S, Wang D. Strength development and microstructure of recycled gypsum-soda residue-GGBS based geopolymer. Construct Build Mater. 2022;331:127312.10.1016/j.conbuildmat.2022.127312 ↗
87. Gopalakrishnan R, Chinnaraju K. Durability of ambient cured alumina silicate concrete based on slag/fly ash blends against sulfate environment. Construct Build Mater. 2019;204:70–83.10.1016/j.conbuildmat.2019.01.153 ↗
88. Hewayde E, Pachenari A, Al-Eleaj H. Resistance of Recycled Aggregate Concrete (RAC) Subjected to Drying-Wetting Cycles to Attack of Magnesium and Sodium Sulfates. J Eng. 2020;2020(1):9746341.
89. Ge P, Song Y, Quan J, Wu Y, Zhou J. Study on the activity, phase, thermal decomposition characteristics, microstructure, and chemical element of hardened cement powder under heating temperature of 100° C~ 1200° C. Struct Construct. 2025;26(2):1127–51.
90. Liu X, Feng P, Yu X, Shen X, Geng G, Lothenbach B. The physiochemical alterations of calcium silicate hydrate (CSH) under magnesium attack. Cem Concr Res. 2022;160:106901.10.1016/j.cemconres.2022.106901 ↗