journal article·2026-06-15Open access

Performance evaluation of manual and robotised hot die forging systems for automotive components

Łukasz Dudkiewicz, Marek Hawryluk

Abstract

Abstract This study investigates the effectiveness of the hot die forging process and the operational durability of forging tools for a component made of 1.4301 stainless steel, comparing manual forging by experienced blacksmiths and a robotised system under industrial conditions on a hydraulic hammer. The novelty of this study lies in a direct industrial-scale comparison of manual and robotised hot die forging performed under identical production conditions. The primary objective is to determine whether improved process stability—achieved through automation—can extend tool life and enhance forging quality. Despite significant technological advancements, automation of hot die forging remains a major challenge due to extreme conditions, including high temperatures, dynamic loads, and intense impacts. Six sets of forging tools were tested in both systems to ensure repeatability and statistical validity. The automated process, performed by two cooperating industrial robots, demonstrated a significant 35% increase in tool life (4333 vs. 3210 forged parts), while also substantially reducing monthly tool rebuilds. Improved process stability was confirmed by higher C pk index, indicating enhanced dimensional repeatability. Microstructural analysis revealed a consistent austenitic structure with hardness around 235 HV0.1, slightly lower than the billet (262 HV0.1). The improved durability and performance were achieved without additional tool treatments. Automation also shifted the operator’s role to supervision, improving working conditions and long-term cost efficiency. These findings confirm that automation enhances repeatability, product quality, and tool life under demanding industrial hot forging conditions.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Metal Forming Simulation Techniques · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Hawryluk M, Rychlik M. An implementation of robotization for the chosen hot die forging process. Arch Civil Mech Eng. 2022;22:119.10.1007/s43452-022-00448-y ↗
2. Gronostajski Z, Hawryluk M. The main aspects of precision forging. Arch Civil Mech Eng. 2006;8(2):39–55.10.1016/S1644-9665(12)60192-7 ↗
3. Van Doren MJ, Slocum A. Design and implementation of a precision material handling robot control system. Int J Mach Tools Manuf. 1995;35(7):1003–14.10.1016/0890-6955(94)00043-J ↗
4. Harrison CS. A review of automation in manufacturing illustrated by a case study on mixed-mode hot forging. Manuf Rev. 2014;1:15.10.1051/mfreview/2014012 ↗
5. Swevers J, Verdonck W, Naumer B, Pieters S, Biber E. An experimental robot load identification method for industrial application. Int J Robot Res. 2002;21(8):701–12.10.1177/027836402761412449 ↗
6. Hawryluk M, Kaszuba M, Gronostajski Z, Sadowski P. Systems of supervision and analysis of industrial forging processes. Eksploatacja i Niezawodność Maint Reliab. 2016;18(3):315–24.10.17531/ein.2016.3.1 ↗
7. Sakabara S. The latest robot systems which reinforce the manufacturing sector. In: Proceedings of the IEEE international conference on robotics and automation. Taipei, Taiwan; 2003. p. xxx–xxx.
8. Harrison CS. (2013). A case study on automating a hot forge for manual and robotic operation. In: IET conference on control and automation 2013: uniting problems and solutions.10.1049/cp.2013.0015 ↗
9. Moustris GP, Hiridis SC, Deliparaschos KM, Konstantinidis KM. Evolution of autonomous and semi-autonomous robotic surgical systems: a review of the literature. Int J Med Rob Comput Assist Surg. 2011;7(4):375–92.10.1002/rcs.408 ↗
10. Nolfi S, Bongard J, Husbands P, Floreano D. Evolutionary robotics. In: Nof S, editor. Springer handbook of robotics. Springer; 2016. p. xxx–xxx.10.1007/978-3-319-32552-1_76 ↗
11. Smalcerz A. Aspects of application of industrial robots in metallurgical processes. Arch Metall Mater. 2013;58(1):93–100. https://doi.org/10.2478/v10172-012-0174-5.10.2478/v10172-012-0174-5 ↗
12. Bӧhringer KF, Fearing RS, Goldberg KY. Microassembly. In: Nof S, editor. Handbook of industrial robotics. Wiley; 1999. p. 1045–67.10.1002/9780470172506.ch55 ↗
13. Belchior J, Guillo M, Courteille E, Maurine P. Off-line compensation of tool path deviations on robotic machining: application to incremental sheet forming. Robot Comput Integr Manuf. 2013;29(4):58–69.10.1016/j.rcim.2012.10.008 ↗
14. Vincent J. Drop forging, die sinking and machine forming of steel: Modern shop practice, processes, methods, machines, tools and details. Read Books; 2007.
15. Mitchell F, Kramer A. Forging operations: machine forging, forging dies and special forging operations. Read Books; 2013.
16. Honczarenko J. Roboty przemysłowe: Budowa i zastosowanie. 2nd ed. Wydawnictwa Naukowo-Techniczne; 2010.
17. European Parliament & Council. Directive 2006/42/EC of the European parliament and of the council of 17 May 2006 on machinery. Off J Eur Union. 2006;L157:24–86.
18. Fu X, Bao Q, Xie H, Fu X. Diffusion of industrial robotics and inclusive growth: labour market evidence from cross-country data. J Bus Res. 2021;122:670–84. https://doi.org/10.1016/j.jbusres.2020.05.051.10.1016/j.jbusres.2020.05.051 ↗
19. Hawryluk M, et al. Analysis of the wear of forging tools surface layer after hybrid surface treatment. Int J Mach Tools Manuf. 2017;114:60–71.10.1016/j.ijmachtools.2016.12.010 ↗
20. Kyle EP. The closed die forging process. Literary Licensing, LLC; 2013.
21. Vincent J. Drop forging, die sinking and machine forming of steel. Read Books; 2007.
22. Herdan F. Lasco – tradition, passion, vision. Lasco Umformtechnik GmbH; 2013.
23. International Federation of Robotics. IFR statistics and reports. https://www.ifr.org (2025).
24. Szyndler R. The current state and trends in world and European forging. Metal Form. 2006;17(3):57–63.
25. Chen S-C, Tung P-C. Trajectory planning for automated robotic deburring on an unknown contour. Int J Mach Tools Manuf. 2000;40(7):957–78.10.1016/S0890-6955(99)00099-1 ↗
26. Jawor K. https://www.kuznia.com.pl (2025).
27. Han L, Cheng X, Li Z, Zhong K. A robot-driven 3D shape measurement system for automatic quality inspection of thermal objects on a forging production line. Sensors. 2018;18(12):4368.10.3390/s18124368 ↗
28. Brucelle O, Bernhart G. Methodology for service life increase of hot forging tools. J Mater Process Technol. 1999;87(1–3):237–46.10.1016/S0924-0136(98)00357-4 ↗
29. Gronostajski Z, Kaszuba M, Hawryluk M, Zwierzchowski M. A review of the degradation mechanisms of hot forging tools. Arch Civil Mech Eng. 2014;14(4):528–39.10.1016/j.acme.2014.07.002 ↗
30. Hawryluk M, Gronostajski Z. Wear mechanisms analysis of dies used in the process of hot forging a valve made of high-nickel steel. Arch Metall Mater. 2018;63:1963–74.10.24425/amm.2018.125131 ↗
31. Hawryluk M. Selected methods of analysing and increasing the durability of forging tools in die forging processes at elevated temperatures (Monograph, in Polish). Institute of Sustainable Technologies—NRI; 2016.10.1016/j.acme.2016.06.001 ↗
32. Kashani H, Amadeh A, Vatanara MR. Improvement of wear resistance of hot working tool steel by hardfacing. Part 2: case study. Mater Sci Technol. 2008;24(3):356–60.10.1179/174328407X166731 ↗
33. Buchmayr B. Damage, lifetime, and repair of forging dies. BHM Berg und Hüttenmännische Monatshefte. 2017;162:88–93.10.1007/s00501-016-0566-3 ↗
34. Lo KH, Shek CH, Lai JKL. Recent developments in stainless steels. Mater Sci Eng R: Rep. 2009;65:39–104.10.1016/j.mser.2009.03.001 ↗
35. Yu F, Feng G, Sun Q, Gao H, Zhang Y. Structure synthesis for forging manipulators. In: Proceedings of the 7th world congress on intelligent control and automation; 2008. p. 400–403.10.1109/WCICA.2008.4592957 ↗
36. Galante G, Passannanti G. Minimizing the cycle time in serial manufacturing systems with multiple dual-gripper robots. Int J Prod Res. 2006;44(4):639–52.10.1080/00207540500337544 ↗
37. Gougar H, Cho S, Prabhu V. High performance loading robot design for a tool-delivery system. Int J Prod Res. 2002;40(14):3401–24.10.1080/00207540210146170 ↗
38. Youcef-Toumi K, Kuo ATY. Design and control of a high-speed direct-drive manipulator. Int J Prod Res. 1989;27(3):375–94.10.1080/00207548908942555 ↗
39. Zdanowicz R. Roboticization of technological processes. Silesian University of Technology; 2002.
40. Bock T, Linner T. Robotic industrialization: automation and robotic technologies for customized component, module, and building prefabrication. Cambridge University Press; 2015.10.1017/CBO9781139924153 ↗
41. Schraner Polska. Internal report: results of research under project no. POIR.01.01.01-00-0537/21. Poland: Łęczyca; 2024.
42. Dudkiewicz Ł, Hawryluk M, Polak S, Zwierzchowski M. Analysis of the possibilities of increasing the durability of forging tools used in the production of forgings for the automotive industry by applying the ALWIN XC hard coating. Int J Refract Met Hard Mater. 2025;132.10.1016/j.ijrmhm.2025.107288 ↗
43. Hawryluk M, Dudkiewicz Ł, Polak S. Robotic and manual hot die forging of connecting rods – efficiency, forging quality and automation potential. J Mater Res Technol. 2025;39:2897–2910.10.1016/j.jmrt.2025.09.164 ↗