High-strength artificial aggregates for structural concrete: a study of physical-mechanical properties, itz morphology, frost resistance and environmental impact
Source abstract
Abstract
The article presents a method for producing high-strength artificial aggregates for structural concrete, developed in accordance with the principles of the circular economy. The aggregates were manufactured using dredged sediments, municipal solid waste incineration residues, as well as fine fractions of construction and demolition waste obtained from ceiling milling. The waste mixtures were subjected to alkali activation and subsequently sintered at temperatures of 1000–1050 °C. Increasing the sintering temperature to 1050 °C promoted the crystallization of albite and wollastonite, which resulted in an increase in aggregate crushing strength from 2.6 to 9 MPa and a 27% reduction in total water absorption. The concrete produced with the developed aggregate (AAC) exhibited an apparent density of 1.99 g/cm³, water absorption of 6.1%, and compressive strength of 38 MPa. Compared to the reference concrete made with lightweight expanded clay aggregate, an increase in density and strength of 17% and 41%, respectively, was observed, along with a 32% reduction in water absorption. Microstructural analyses (SEM, µCT) revealed a more compact structure and a denser interfacial transition zone in AAC, explaining its improved durability and enhanced frost resistance. The life cycle assessment results confirmed a 41% reduction in total environmental impact and a 12% decrease in CO2 emissions in wall applications. The developed waste-based artificial aggregates constitute a sustainable alternative to conventional materials, supporting decarbonization and the advancement of circular economy practices in construction.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (98)
Show source-provided references
1. Watari T, Cao Z, Cabrera Serrenho A, Cullen J. Growing role of concrete in sand and climate crises. iScience. 2023;26:106782. https://doi.org/10.1016/j.isci.2023.106782.10.1016/j.isci.2023.106782 ↗
2. Kozioł W, Baic I, Miros A. Extraction and production of natural aggregates in Poland and the European Union—analysis of changes and forecasts. Arch Min Sci. 2025;70(2):223–31. https://doi.org/10.24425/ams.2025.154660.10.24425/ams.2025.154660 ↗
3. World Bank. What a Waste 3.0: Global snapshot of solid waste management toward circularity until 2050. Washington, DC, The World Bank Group. 2023. Report and statistics on global waste generation and management. https://www.worldbank.org/what-a-waste
4. Ren P, Ling TC, Mo KH. Recent advances in artificial aggregate production. J Clean Prod. 2021;291:1252151. https://doi.org/10.1016/j.jclepro.2020.125215.10.1016/j.jclepro.2020.125215 ↗
5. Franus M, Barnat-Hunek D, Wdowin M. Utilization of sewage sludge in the manufacture of lightweight aggregate. Environ Monit Assess. 2016;188(1):13. https://doi.org/10.1007/s10661-015-5010-8.10.1007/s10661-015-5010-8 ↗
6. Franus M, Panek R, Madej J, Franus W. The properties of fly ash derived lightweight aggregates obtained using microwave radiation. Constr Build Mater. 2019;227:1–10. https://doi.org/10.1016/j.conbuildmat.2019.116677.10.1016/j.conbuildmat.2019.116677 ↗
7. Ozkan H, Kabay N. Manufacture of sintered aggregate using washing aggregate sludge and ground granulated blast furnace slag: Characterization of the aggregate and effects on concrete properties. Constr Build Mater. 2022;342:128025. https://doi.org/10.1016/j.conbuildmat.2022.128025.10.1016/j.conbuildmat.2022.128025 ↗
8. Andrzejuk W, Grzegorczyk-Frańczak M, Barnat-Hunek D, Franus M, Łagód G. Microstructure, durability and surface free energy of lightweight aggregate modification of sanitary ceramic wastes and sewage sludge. J Build Eng. 2024;93:109725. https://doi.org/10.1016/j.jobe.2024.109725.10.1016/j.jobe.2024.109725 ↗
9. Liu P, Farzana R, Rajarao R, Sahajwalla V. Lightweight expanded aggregates from the mixture of waste automotive plastics and clay. Constr Build Mater. 2017;145:283–91. https://doi.org/10.1016/j.conbuildmat.2017.04.009.10.1016/j.conbuildmat.2017.04.009 ↗
10. Maj K, Koszelnik P. Możliwości wykorzystania osadów dennych pochodzących z rzeki San (in Polish) / Possibilities of Using Bottom Sediments from the San River. Ecol Eng. 2016;48:147–52. https://doi.org/10.12912/23920629/62XXX.10.12912/23920629/62XXX ↗
11. Bartoszek L, Koszelnik P. Ocena potencjału recyklingu osadów dennych w aspekcie gospodarki o obiegu zamkniętym, (in Polish) / Assessment of the recycling potential of bottom Sediments in the context of the circular economy. Ecol Eng. 2016;47:164–71. https://doi.org/10.12912/23920629/66936.10.12912/23920629/66936 ↗
12. Ke X, Gui S, Huang H, Zhang H, Wang C, Guo W. Ecological risk assessment and source identification for heavy metals in surface sediment from the Liaohe River protected area, China. Chemosphere. 2017;175:473–81. https://doi.org/10.1016/j.chemosphere.2017.02.029.10.1016/j.chemosphere.2017.02.029 ↗
13. Stec J, Kosikowska U, Mendrycka M, Stępień-Pyśniak D, Niedźwiedzka-Rystwej P, Bębnowska D, Hrynkiewicz R, Zientara-Wysocka J, Grywalska E. Opportunistic pathogens of recreational waters with emphasis on antimicrobial resistance—a possible subject of human health concern. Int J Environ Res Public Health. 2022;19:7308. https://doi.org/10.3390/ijerph19127308.10.3390/ijerph19127308 ↗
14. Canpolat Ö, Varol M, Okan ÖÖ, Eriş KK. Sediment contamination by trace elements and the associated ecological and health risk assessment: a case study from a large reservoir (Turkey). Environ Res. 2022;204:112145. https://doi.org/10.1016/j.envres.2021.112145.10.1016/j.envres.2021.112145 ↗
15. Montuori P, De Rosa E, Sarnacchiaro P, Di Duca F, Provisiero DP, Nardone A, et al. Polychlorinated biphenyls and organochlorine pesticides in water and sediment from Volturno River, Southern Italy: occurrence, distribution and risk assessment. Environ Sci Eur. 2020;32:123. https://doi.org/10.1186/s12302-020-00408-4.10.1186/s12302-020-00408-4 ↗
16. Gorączko M, Woziwodzki Z, Zawalski A, Dzieweczyński P. Ocena możliwości oczyszczania dna zbiornika wodnego za pomocą spustu rurowego w korpusie grobli (in Polish) / Assessment of the feasibility of cleaning the bottom of a water reservoir using a pipe outlet in the embankment body. JCEEA J Civil Eng Environ Archit. 2016;63(1/II/16):9–16. https://doi.org/10.7862/RB.2016.55.10.7862/RB.2016.55 ↗
17. Ayati B, Ferrándiz-Mas V, Newport D, Cheeseman C. Use of clay in the manufacture of lightweight aggregate. Constr Build Mater. 2018;162:124–31. https://doi.org/10.1016/j.conbuildmat.2017.12.018.10.1016/j.conbuildmat.2017.12.018 ↗
18. Mezencevova A, Yeboah NN, Burns SE, Kahn LF, Kurtis KE. Utilization of Savannah harbor river sediment as the primary raw material in production of fired brick. J Environ Manage. 2012;113:128–38. https://doi.org/10.1016/j.jenvman.2012.08.030.10.1016/j.jenvman.2012.08.030 ↗
19. Junakova N, Junak J. Recycling of reservoir sediment material as a binder in concrete. Procedia Eng. 2017;180:1292–7. https://doi.org/10.1016/j.proeng.2017.04.291.10.1016/j.proeng.2017.04.291 ↗
20. Božič M, Žibret L, Kvočka D, Pranjić AM, Gregorc B, Ducman V. Deava river sediment in clay brick production: characterization, properties, and environmental performance. J Build Eng. 2023;71:106470. https://doi.org/10.1016/j.jobe.2023.106470.10.1016/j.jobe.2023.106470 ↗
21. Ma J, Sun J, Yu Z, Hou G, Xia B. A comprehensive review of dredged marine sediments—multiple roles of utilization in cement-based materials and construction products. Mar Pollut Bull. 2025;217:118079. https://doi.org/10.1016/j.marpolbul.2025.118079.10.1016/j.marpolbul.2025.118079 ↗
22. Hung MF, Hwang CL. Study of fine sediments for making lightweight aggregate. Waste Manage Res. 2007;25:449. https://doi.org/10.1177/0734242X07077615.10.1177/0734242X07077615 ↗
23. Chiou IJ, Chen CH. Effects of waste-glass fineness on sintering of reservoir-sediment aggregates. Constr Build Mater. 2013;38:987–93. https://doi.org/10.1016/j.conbuildmat.2012.09.042.10.1016/j.conbuildmat.2012.09.042 ↗
24. Hwang CL, Bui LAT, Lin KL, Lo CT. Manufacture and performance of lightweight aggregate from municipal solid waste incinerator fly ash and reservoir sediment for self-consolidating lightweight concrete. Cem Concr Compos. 2012;34:1159–66. https://doi.org/10.1016/j.cemconcomp.2012.07.004.10.1016/j.cemconcomp.2012.07.004 ↗
25. Chen HJ, Yang MD, Tang CW, Wang SY. Producing synthetic lightweight aggregates from reservoir sediments. Constr Build Mater. 2012;28:387–94. https://doi.org/10.1016/j.conbuildmat.2011.08.051.10.1016/j.conbuildmat.2011.08.051 ↗
26. Liao YC, Huang CY. Effects of CaO addition on lightweight aggregates produced from water reservoir sediment. Constr Build Mater. 2011;25:2997–3002. https://doi.org/10.1016/j.conbuildmat.2010.12.034.10.1016/j.conbuildmat.2010.12.034 ↗
27. Liu M, Wang C, Bai Y, Xu G. Effects of sintering temperature on the characteristics of lightweight aggregate made from sewage sludge and river sediment. J Alloys Compd. 2018;748:522–7. https://doi.org/10.1016/j.jallcom.2018.03.216.10.1016/j.jallcom.2018.03.216 ↗
28. Chen HJ, Chang SN, Tang CW. Application of the Taguchi Method for optimizing the process parameters of producing lightweight aggregates by incorporating tile grinding sludge with reservoir sediments. Mater (Basel). 2017;10(11):1294. https://doi.org/10.3390/ma10111294.10.3390/ma10111294 ↗
29. Quina MJ, Bordado JC, Quinta-Ferreira RM. Treatment and use of air pollution control residues from MSW incineration: an overview. Waste Manag. 2008;28:2097–121. https://doi.org/10.1016/j.wasman.2007.08.030.10.1016/j.wasman.2007.08.030 ↗
30. Sakai S, Hiraoka M. Municipal solid waste incinerator residue recycling by thermal processes. Waste Manag. 2000;20:249–58. https://doi.org/10.1016/S0956-053X(99)00315-3.10.1016/S0956-053X(99)00315-3 ↗
31. Mangialardi T. Sintering of MSW fly ash for reuse as a concrete aggregate. J Hazard Mater. 2001;87:225–39. https://doi.org/10.1016/S0304-3894(01)00286-2.10.1016/S0304-3894(01)00286-2 ↗
32. Wang KS, Sun CJ, Yeh CC. The thermotreatment of MSW incinerator fly ash for use as an aggregate: a study of the characteristics of size-fractioning. Resour Conserv Recycl. 2002;35:177–90. https://doi.org/10.1016/S0921-3449(01)00121-5.10.1016/S0921-3449(01)00121-5 ↗
33. Deng X, Jian R, Chen S, Wang X, Wan C, Xue Y, Wang T. Killing two birds with one stone: preparation of ceramsite high-strength lightweight aggregate via co-sintering of dredged sediment and municipal solid waste incinerated fly ash. Constr Build Mater. 2023;409(1–3):134039. https://doi.org/10.1016/j.conbuildmat.2023.134039.10.1016/j.conbuildmat.2023.134039 ↗
34. Sabbas T, Polettini A, Pomi R, Astrup T, Hjelmar O, Mostbauer P, Cappai G, Magel G, Salhofer S, Speiser C, Heuss-Assbichler S, Klein R, Lechber P. Management of municipal solid waste incineration residues. Waste Manag. 2003;23(1):61–88. https://doi.org/10.1016/S0956-053X(02)00161-7.10.1016/S0956-053X(02)00161-7 ↗
35. Shao Y, Shao Y, Zhang W, Zhu Y, Dou T, Chu L, Liu Z. Preparation of municipal solid waste incineration fly ash-based ceramsite and its mechanisms of heavy metal immobilization. Waste Manag. 2022;43:54–60. https://doi.org/10.1016/j.wasman.2022.02.021.10.1016/j.wasman.2022.02.021 ↗
36. Long Y, Pu K, Yang Y, Huang H, Fang H, Shen D, Geng H, Ruan J, Gu F. Preparation of high-strength ceramsite from municipal solid waste incineration fly ash and clay based on CaO-SiO2-Al2O3 system. Constr Build Mater. 2023;368:130492. https://doi.org/10.1016/j.conbuildmat.2023.130492.10.1016/j.conbuildmat.2023.130492 ↗
37. Quina MJ, Almeida MA, Santos R, Bordado JM, Quinta-Ferreira RM. Compatibility analysis of municipal solid waste incineration residues and clay for producing lightweight aggregates. Appl Clay Sci. 2014;102:71–80. https://doi.org/10.1016/j.clay.2014.10.016.10.1016/j.clay.2014.10.016 ↗
38. Deloitte. Study on resource efficient use of mixed wastes, improving management of construction and demolition waste—final report. Prepared for the European Commission, DG ENV; 2017.
39. Eurostat. Waste statistics—statistics explained. In: Eurostat, editor. 2024. https://ec.europa.eu/eurostat/statistics-explained/index.php?title=Waste_statistics (Accessed September 2024).
40. Mueller A, Sokolova SN, Vereshagin VI. Characteristics of lightweight aggregates from primary and recycled raw materials. Constr Build Mater. 2008;22(4):703–12. https://doi.org/10.1016/j.conbuildmat.2007.06.009.10.1016/j.conbuildmat.2007.06.009 ↗
41. Rübner K, Prinz C, Adolphs J, Hempel S, Schnell A. Microstructural characterisation of lightweight granules made from masonry rubble. Micropor Mesopor Mat. 2015;209:113–21. https://doi.org/10.1016/j.micromeso.2014.08.060.10.1016/j.micromeso.2014.08.060 ↗
42. Nguyen HP, Mueller A, Nguyen WT, Nguyen CT. Development and characterization of lightweight aggregate recycled from construction and demolition waste mixed with other industrial by-products. Constr Build Mater. 2021;313:125472. https://doi.org/10.1016/j.conbuildmat.2021.125472.10.1016/j.conbuildmat.2021.125472 ↗
43. Chinnu SN, Minnu SN, Bahurudeen A, Senthilkumar R. Recycling of industrial and agricultural wastes as alternative coarse aggregates: a step towards cleaner production of concrete. Constr Build Mater. 2021;287:123056. https://doi.org/10.1016/j.conbuildmat.2021.123056.10.1016/j.conbuildmat.2021.123056 ↗
44. EN 13055-1:2002. Lightweight aggregates—Part 1: Lightweight aggregates for concrete, mortar and grout. (Ed.). Brussels, Belgium: CEN; 2002. European Committee for Standardization.
45. Leca. Declaration of performance No: DoP-PL-LKbud-M/10/19. 2019. https://www.leca.pl/produkty/zaprawy-i-betony/lecar-keramzyt-budowlany-m
46. EN 197-1:2002. Cement—Part 1: Composition, specifications and conformity criteria for common cements. (Ed.). Warsaw, Poland: PKN; 2002. Polish Committee for Standardization.
47. Dyckerhoff. Declaration of Performance No. 1487-CPR-024-07. https://www.dyckerhoff.pl/cem-ii/b-v-32-5-r
48. EN 1097-3. 1998. Tests for mechanical and physical properties of aggregates—Part 3: Determination of loose bulk density and voids. In: European Committee for Standardization, editor. Brussels: CEN; 1998.
49. EN 1097-6. 2022. Tests for mechanical and physical properties of aggregates—Part 6: Determination of particle density and water absorption. In: European Committee for Standardization, editor. Brussels: CEN; 2022.
50. EN 1367-1:2007. Tests for thermal and weathering properties of aggregates—Part 1: Determination of resistance to freezing and thawing. (Ed.). Brussels: CEN; 2007. European Committee for Standardization.
51. EN 12390-7. :2019-08. Testing hardened concrete—Part 7: Density of hardened concrete. (Ed.). Warsaw: PKN; 2019. Polish Committee for Standardization.
52. EN 1936:2010. Natural stone test methods—Determination of real density and apparent density, and of total and open porosity. (Ed.). Brussels: CEN; 2010. European Committee for Standardization.
53. PN-B-06250. 1988. Ordinary Concrete (in Polish). In: Polish Committee for Standardization, editor. Warsaw: PKN; 1988.
54. EN 12390-3. :2019-07. Testing hardened concrete—Part 3: Compressive strength of test specimens. (Ed.). Brussels: CEN; 2019. European Committee for Standardization.
55. EN 772 – 11:2002. Methods of test for masonry units—Part 11: Determination of water absorption of aggregate concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units. (Ed.). Brussels: CEN; 2002. European Committee for Standardization.
56. Jolliet O, Margni M, Charles R, et al. IMPACT 2002+: a new life cycle impact assessment methodology. Int J LCA. 2003;8:324–30. https://doi.org/10.1007/BF02978505.10.1007/BF02978505 ↗
57. Ting JM, Lin RY. Effect of particle-size distribution on sintering. J Mater Sci. 1994;29:1867–72.10.1007/BF00351306 ↗
58. Jin J, Ying W, Jiawei L, Ming W, Chuanlin W, Wei B. Characterization and mechanism of sintered light aggregate ceramsite with engineering excavated soil. Structures. 2024;70:107699. https://doi.org/10.1016/j.istruc.2024.107699.10.1016/j.istruc.2024.107699 ↗
59. Geng J, Niu S, Han K, Wang Y, Zhu J, Yang Z, Liu J, Zhang H, Sun X, Liang B, Zheng Y. Properties of artificial lightweight aggregates prepared from coal and biomass co-fired fly ashes and sewage sludge fly ash. Ceram Int. 2024;50(16):28609–18. https://doi.org/10.1016/j.ceramint.2024.05.172.10.1016/j.ceramint.2024.05.172 ↗
60. Zhou X, Zhang Y, Liu C, Wu F. Resource recovery of sludge incineration residue in lightweight aggregate: performance mechanism, and environmental safety analysis. Constr Build Mater. 2024;436:136962. https://doi.org/10.1016/j.conbuildmat.2024.136962.10.1016/j.conbuildmat.2024.136962 ↗
61. González-Corrochano B, Alonso-Azcárate J, Rodas M, Barrenechea JF, Luque FJ. Microstructure and mineralogy of lightweight aggregates manufactured from mining and industrial wastes. Constr Build Mater. 2011;25(8):3591–602. https://doi.org/10.1016/j.conbuildmat.2011.03.053.10.1016/j.conbuildmat.2011.03.053 ↗
62. Franus W, Jozefaciuk G, Bandura L, Franus M. Use of spent zeolite sorbents for the preparation of lightweight aggregates differing in microstructure. Minerals. 2017;7:25. https://doi.org/10.3390/min7020025.10.3390/min7020025 ↗
63. Nguyen HP, Mueller A, Nguyen VT, Nguyen CT. Development and characterization of lightweight aggregate recycled from construction and demolition waste mixed with other industrial by-products. Constr Build Mater. 2021;313:125472. https://doi.org/10.1016/j.conbuildmat.2021.125472.10.1016/j.conbuildmat.2021.125472 ↗
64. Domagała L. Durability of structural lightweight concrete with sintered fly ash aggregate. Materials. 2020;13:4565. https://doi.org/10.3390/ma13204565.10.3390/ma13204565 ↗
65. Narendra S, Vasugi V. Development of sintered artificial coarse aggregate by employing the Taguchi optimization technique. Case Stud Constr Mater. 2025;22:e04724. https://doi.org/10.1016/j.cscm.2025.e04724.10.1016/j.cscm.2025.e04724 ↗
66. Islam S, Ara G, Akhtar U et al. Development of lightweight structural concrete with artificial aggregate manufactured from local clay and solid waste materials. Heliyon. 2024;10.10.1016/j.heliyon.2024.e34887 ↗
67. Deng X, Jian R, Chen S, Wang X, Wan C, Xue Y, Wang T. Killing two birds with one stone: preparation of ceramsite high-strength lightweight aggregate via co-sintering of dredged sediment and municipal solid waste incinerated fly ash. Constr Build Mater. 2023;409:134039.10.1016/j.conbuildmat.2023.134039 ↗
68. Kockal NU, Ozturan T. Effects of lightweight fly ash aggregate properties on the behavior of lightweight concretes. J Hazard Mater. 2010;179(1–3):954–65. https://doi.org/10.1016/j.jhazmat.2010.03.098.10.1016/j.jhazmat.2010.03.098 ↗
69. Punlert S, Laoratanakul P, Kongdee R, Suntako R. Effect of lightweight aggregates prepared from fly ash on lightweight concrete performances. J Phys Conf Ser. 2017;901:012086. https://doi.org/10.1088/1742-6596/901/1/012086.10.1088/1742-6596/901/1/012086 ↗
70. da Silva Neto J, Anjos M, Dutra R, de Souza M, Pederneiras C. Optimization via Taguchi of artificial lightweight aggregates obtained from kaolinite clay and ceramic waste: Development and industrial applications. Buildings. 2025. https://doi.org/10.3390/buildings15122003.10.3390/buildings15122003 ↗
71. Risdanareni P, Ekaputri J, Maulidiyawati I, Puspitasari P. Mechanical properties of concrete composed of sintered fly ash lightweight aggregate. MATEC Web Conf. 2018;195:01008. https://doi.org/10.1051/matecconf/201819501008.10.1051/matecconf/201819501008 ↗
72. Lee KH, Kim YT, Park SM. Manufacturing and application of artificial lightweight aggregate from water treatment sludge. J Clean Prod. 2021;302:127260. https://doi.org/10.1016/j.jclepro.2021.127260.10.1016/j.jclepro.2021.127260 ↗
73. Hwang CL, Bui LAT, Lin KL, Lo CT. Manufacture and performance of lightweight aggregate from municipal solid waste incinerator fly ash and reservoir sediment for self-consolidating lightweight concrete. Cem Concr Compos. 2012;34(10):1159–66. https://doi.org/10.1016/j.cemconcomp.2012.07.004.10.1016/j.cemconcomp.2012.07.004 ↗
74. Han R, Yang J, Liu H, Luo H, Leng H, Wu W, Zhao Y, Song B. Development of sustainable construction aggregates: Preparation and environmental safety assessment of sintered artificial lightweight aggregates by red mud-coordinated multi-source solid wastes. Environ Res. 2026;289:123334. https://doi.org/10.1016/j.envres.2025.123334.10.1016/j.envres.2025.123334 ↗
75. Li X, He C, Lv Y, Jian S, Jiang W, Jiang D, Wu K, Dan J. Effect of sintering temperature and dwelling time on the characteristics of lightweight aggregate produced from sewage sludge and waste glass powder. Ceram Int. 2021;47(23):33435–43. https://doi.org/10.1016/j.ceramint.2021.08.250.10.1016/j.ceramint.2021.08.250 ↗
76. González-Corrochano B, Alonso-Azcárate J, Rodas M, Luque FJ, Barrenechea JF. Microstructure and mineralogy of lightweight aggregates produced from washing aggregate sludge, fly ash and used motor oil. Cem Concr Compos. 2010;32(9):694–707. https://doi.org/10.1016/j.cemconcomp.2010.07.014.10.1016/j.cemconcomp.2010.07.014 ↗
77. Neville AM. Properties of concrete. London: Longman Group Limited; 1995.
78. Loz HF, Monticelli JP, Futai MM, Tutumluer E, Lange DA, Angulo SC. Roughness of natural aggregates by interferometry and its microstructure. Constr Build Mater. 2021;297:123646. https://doi.org/10.1016/j.conbuildmat.2021.123646.10.1016/j.conbuildmat.2021.123646 ↗
79. Zhou X, Qian C, Li Z. Effect of aggregate surface morphology on water absorption and mechanical properties of concrete. Constr Build Mater. 2017;144:234–42. https://doi.org/10.1016/j.conbuildmat.2017.03.180.10.1016/j.conbuildmat.2017.03.180 ↗
80. Pan F, Oeser M, Liu P. Atomic perspectives on the impact of aggregate surface roughness: unraveling changes in bond strength and failure modes at the bitumen-aggregate interface. Fuel. 2025;379:133011. https://doi.org/10.1016/j.fuel.2024.133011.10.1016/j.fuel.2024.133011 ↗
81. Suchorab Z, Barnat-Hunek D, Franus M, Łagód G. Mechanical and physical properties of hydrophobized lightweight aggregate concrete with sewage sludge. Materials. 2016;9:317. https://doi.org/10.3390/ma9050317.10.3390/ma9050317 ↗
82. Garboczi EJ, Bentz DP. Digital simulation of the aggregate–cement paste interfacial zone in concrete. J Mater Res. 1991;6(1):196–201. https://doi.org/10.1557/JMR.1991.0196.10.1557/JMR.1991.0196 ↗
83. Lu C, Yu Q, Wei J, Niu Y, Zhang Y, Lin C, Chen P, Shi C, Yang P. Influence of interface transition zones (ITZ) and pore structure on the compressive strength of recycled aggregate concrete. Constr Build Mater. 2024;456:139299. https://doi.org/10.1016/j.conbuildmat.2024.139299.10.1016/j.conbuildmat.2024.139299 ↗
84. Al-Dikheeli M, Thaib H, Alasadi L. Mechanical properties and freeze-thaw resistance of lightweight aggregate concrete using artificial clay aggregate. Open Eng. 2022;12:323–31. https://doi.org/10.1515/eng-2022-0019.10.1515/eng-2022-0019 ↗
85. Vargas P, Restrepo-Baena O, Tobón JI. Microstructural analysis of interfacial transition zone (ITZ) and its impact on the compressive strength of lightweight concretes. Constr Build Mater. 2017;137:381–9. https://doi.org/10.1016/j.conbuildmat.2017.01.101.10.1016/j.conbuildmat.2017.01.101 ↗
86. Mehta PK, Monteiro PJ. Concrete: microstructure, properties, and materials. 4th ed. New York: McGraw-Hill Education; 2014.
87. Wu K, Han H, Xu L, De Schutter G. Supported ITZ modification efficiencies via surface coating nanoparticles on aggregate and its influence on properties. Materials. 2019;12(21):3541. https://doi.org/10.3390/ma12213541.10.3390/ma12213541 ↗
88. Chen Q, Zhang J, Wang Z, Zhao T, Wang Z. A review of the interfacial transition zones in concrete: identification, physical characteristics, and mechanical properties. Eng Fract Mech. 2024;300:109979. https://doi.org/10.1016/j.engfracmech.2024.109979.10.1016/j.engfracmech.2024.109979 ↗
89. Napolano L, Menna C, Asprone D, et al. Life cycle environmental impact of different replacement options for a typical old flat roof. Int J Life Cycle Assess. 2015;20:694–708. https://doi.org/10.1007/s11367-015-0852-4.10.1007/s11367-015-0852-4 ↗
90. Ali AAM. Comparative life cycle assessment of polymeric and conventional concrete for sustainable construction: a case study of a new clinic at Assiut University Hospital in Egypt. J Eng Sci. 2023;51(6):449–67. https://doi.org/10.21608/jesaun.2023.214792.1235.10.21608/jesaun.2023.214792.1235 ↗
91. Dias A, Nezami S, Silvestre J, Kurda R, Silva R, Martins I, de Brito J. Environmental and economic comparison of natural and recycled aggregates using LCA. Recycling. 2022;7(4):43. https://doi.org/10.3390/recycling7040043.10.3390/recycling7040043 ↗
92. Caruso MC, Menna C, Asprone D, Prota A. LCA-based comparison of the environmental impact of different structural systems. IOP Conf Ser Mater Sci Eng. 2018;442:012010. https://doi.org/10.1088/1757-899X/442/1/012010.10.1088/1757-899X/442/1/012010 ↗
93. Colangelo F, Gómez Navarro T, Farina I, Petrillo A. Comparative LCA of concrete with recycled aggregates: a circular economy mindset in Europe. Int J Life Cycle Assess. 2020;25:1790–804. https://doi.org/10.1007/s11367-020-01798-6.10.1007/s11367-020-01798-6 ↗
94. Rezaeicherati F, Memarzadeh A, Esmailpour A, Fallahnejad H, Ghorbanzadeh A, Nematzadeh M. Durability evaluation and environmental implications of blended cement with colloidal nano-silica for use in recycled fine aggregate concrete: experimental and theoretical study. Constr Build Mater. 2023;402:132926. https://doi.org/10.1016/j.conbuildmat.2023.132926.10.1016/j.conbuildmat.2023.132926 ↗
95. Gursel AP, Masanet E, Horvath A, Stadel A. Life-cycle inventory analysis of concrete production: a critical review. Cem Concr Compos. 2014;51:38–48. https://doi.org/10.1016/j.cemconcomp.2014.03.005.10.1016/j.cemconcomp.2014.03.005 ↗
96. Liu R, Yao L, Gong Y, Wang Z. Life cycle assessment with carbon footprint analysis in glulam buildings: a review. Buildings. 2025;15(12):2127. https://doi.org/10.3390/buildings15122127.10.3390/buildings15122127 ↗
97. Roy R, Mottaghi M, Woods M, Pearce JM. Life cycle carbon emissions savings of replacing concrete with recycled polycarbonate and sand composite. Sustainability. 2025;17(3):839. https://doi.org/10.3390/su17030839.10.3390/su17030839 ↗
98. Munir Q, Lahtela V, Kärki T, Koivula A. Assessing life cycle sustainability: a comprehensive review of concrete produced from construction waste fine fractions. J Environ Manage. 2024;366:121734. https://doi.org/10.1016/j.jenvman.2024.121734.10.1016/j.jenvman.2024.121734 ↗