journal article·2026-06-08Open access

Valorization of construction and demolition waste in high-performance epoxy composites for sustainable construction

Marlena Moj, Bartłomiej Bodak, Michał Pachnicz, Marijana Hadzima-Nyarko, Sławomir Czarnecki

Abstract

Abstract The growing demand for sustainable construction materials has increased interest in the reuse of construction and demolition waste (CDW). However, the application of recycled aggregates in cementitious composites is often limited by their high porosity, water absorption, and negative impact on mechanical properties. This study proposes an alternative approach by incorporating CDW as coarse aggregate in epoxy resin-based composites, aiming to minimize processing complexity and enhance material performance. Recycled concrete and brick aggregates were used in various filling ratios, and the resulting composites were tested for physical and mechanical properties, including compressive strength, bending tensile strength, and microstructural characteristics over three recycling cycles. The results demonstrate that composites fully filled with brick aggregate and partially filled with concrete aggregate achieved compressive strengths up to 60 MPa, exceeding the reference material, while partial filling improved bending tensile strength and reduced brittleness. Microstructural analysis revealed minor changes in resin and aggregate properties after recycling, with no significant impact on overall performance. The composites also showed good water resistance and superior strength-to-area efficiency compared to conventional materials. These findings suggest that epoxy resin-based composites with CDW aggregates can provide a viable lightweight and high-performance alternative for construction applications while contributing to waste management.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Recycled Aggregate Concrete Performance · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Alaloul WS, Musarat MA, Rabbani MBA, Iqbal Q, Maqsoom A, Farooq W. Construction sector contribution to economic stability: Malaysian GDP distribution. Sustainability. 2021;13(9):5012. https://doi.org/10.3390/su13095012.10.3390/su13095012 ↗
2. United Nations Economic Commission for Europe. (2025, March 1). Indicator code 8. https://w3.unece.org/PXWeb/en/Table?IndicatorCode=8
3. Rodriguez-Morales J, Burciaga-Diaz O, Gomez-Zamorano LY, Escalante-Garcia JI. Transforming construction and demolition waste concrete as a precursor in sustainable cementitious materials: an innovative recycling approach. Resour Conserv Recycl. 2024;204:107474. https://doi.org/10.1016/j.resconrec.2024.107474.10.1016/j.resconrec.2024.107474 ↗
4. Sakthibala RK, Vasanthi P, Hariharasudhan C, Partheeban P. A critical review on recycling and reuse of construction and demolition waste materials. Clean Waste Syst. 2025;12:100375. https://doi.org/10.1016/j.clwas.2025.100375.10.1016/j.clwas.2025.100375 ↗
5. Czarnecki S, Rudner M. Recycling of materials from renovation and demolition of building structures in the spirit of sustainable material engineering. Buildings. 2023;13(7):1842. https://doi.org/10.3390/buildings13071842.10.3390/buildings13071842 ↗
6. Tan J, Cizer Ö, De Vlieger J, Dan H, Li J. Impacts of milling duration on construction and demolition waste (CDW) based precursor and resulting geopolymer: reactivity, geopolymerization and sustainability. Resour Conserv Recycl. 2022;184:106433. https://doi.org/10.1016/j.resconrec.2022.106433.10.1016/j.resconrec.2022.106433 ↗
7. Poon CS. Reducing construction waste. Waste Manag. 2007;27(12):1715–6. https://doi.org/10.1016/j.wasman.2007.08.013.10.1016/j.wasman.2007.08.013 ↗
8. Gao Y, Yiu TW, Shen X, Tam VWY. Life cycle insights into construction and demolition waste management: past, present and emerging futures. J Build Eng. 2025;111:113441. https://doi.org/10.1016/j.jobe.2025.113441.10.1016/j.jobe.2025.113441 ↗
9. Hossain MU, Ng ST. Strategies for enhancing the accuracy of evaluation and sustainability performance of building. J Environ Manage. 2020;261:110230. https://doi.org/10.1016/j.jenvman.2020.110230.10.1016/j.jenvman.2020.110230 ↗
10. Malladi RC, Ajayan SA, Chandran G, Selvaraj T. Upcycling of construction and demolition waste: recovery and reuse of binder and fine aggregate in cement applications to achieve circular economy. Clean Eng Technol. 2025;24:100864. https://doi.org/10.1016/j.clet.2024.100864.10.1016/j.clet.2024.100864 ↗
11. Akhtar A, Sarmah AK. Construction and demolition waste generation and properties of recycled aggregate concrete: a global perspective. J Clean Prod. 2018;186:262–81. https://doi.org/10.1016/j.jclepro.2018.03.085.10.1016/j.jclepro.2018.03.085 ↗
12. Köhler J, Nielsen FF, Verstermark J, Thuesen C. Recirculation of construction and demolition waste: a case study of Danish producers and demolishers. Clean Mater. 2024;14:100276. https://doi.org/10.1016/j.clema.2024.100276.10.1016/j.clema.2024.100276 ↗
13. De Brito J, Saikia N. Recycled aggregate in concrete: Use of industrial, construction and demolition waste. Springer Science & Business Media; 2012.
14. Wang B, Yan L, Fu Q, Kasal B. A comprehensive review on recycled aggregate and recycled aggregate concrete. Resour Conserv Recycl. 2021;171:105565. https://doi.org/10.1016/j.resconrec.2021.105565.10.1016/j.resconrec.2021.105565 ↗
15. Tang Q, Ma Z, Wu H, Wang W. The utilization of eco-friendly recycled powder from concrete and brick waste in new concrete: a critical review. Cem Concr Compos. 2020;114:103807. https://doi.org/10.1016/j.cemconcomp.2020.103807.10.1016/j.cemconcomp.2020.103807 ↗
16. Correia JR, de Brito J, Pereira AS. Effects on concrete durability of using recycled ceramic aggregates. Mater Struct. 2006;39:169–77. https://doi.org/10.1617/s11527-005-9014-7.10.1617/s11527-005-9014-7 ↗
17. Jiménez JR, Ayuso J, López M, Fernández JM, de Brito J. Use of fine recycled aggregates from ceramic waste in masonry mortar manufacturing. Constr Build Mater. 2013;40:679–90. https://doi.org/10.1016/j.conbuildmat.2012.11.036.10.1016/j.conbuildmat.2012.11.036 ↗
18. Debieb F, Kenai S. The use of coarse and fine crushed bricks as aggregate in concrete. Constr Build Mater. 2008;22(5):886–93. https://doi.org/10.1016/j.conbuildmat.2006.12.013.10.1016/j.conbuildmat.2006.12.013 ↗
19. Li J, Deng X, Lu Z, Li X, Hou L, Jiang J, et al. Recycled concrete fines as a supplementary cementitious material: mechanical performances, hydration, and microstructures in cementitious systems. Case Stud Constr Mater. 2024;21:e03575. https://doi.org/10.1016/j.cscm.2024.e03575.10.1016/j.cscm.2024.e03575 ↗
20. Şenol AF, Karakurt C. High-strength self-compacting concrete produced with recycled clay brick powders: rheological, mechanical and microstructural properties. J Build Eng. 2024;88:109175. https://doi.org/10.1016/j.jobe.2024.109175.10.1016/j.jobe.2024.109175 ↗
21. Chowaniec A, Czarnecki S, Sadowski Ł. The effect of the amount and particle size of the waste quartz powder on the adhesive properties of epoxy resin coatings. Int J Adhes Adhes. 2022;117:103009. https://doi.org/10.1016/j.ijadhadh.2021.103009.10.1016/j.ijadhadh.2021.103009 ↗
22. PN-EN 196–1:2016. Methods of testing cement – Part 1: Determination of strength. Polish Committee for Standardization.
23. PN-EN 1015–11:2019. Methods of test for mortar for masonry – Part 11: Determination of flexural and compressive strength of hardened mortar. Polish Committee for Standardization.
24. Oliver WC, Pharr GM. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology. J Mater Res. 2004;19(1):3–20.10.1557/jmr.2004.19.1.3 ↗
25. Oliver WC, Pharr GM. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res. 1992;7(6):1564–83. https://doi.org/10.1557/JMR.1992.1564.10.1557/JMR.1992.1564 ↗
26. Constantinides G, Chandran KR, Ulm F-J, Van Vliet KJ. Grid indentation analysis of composite microstructure and mechanics: principles and validation. Mater Sci Eng A. 2006;430(1–2):189–202.10.1016/j.msea.2006.05.125 ↗
27. Chen G, Zhang Y, Xu Q, Wu X, Meng K, Fan H. A novel brittle evaluation method considering energy evolution. Eng Fail Anal. 2025;170:109280.10.1016/j.engfailanal.2025.109280 ↗
28. Góra J, Szafraniec M. Influence of maximum aggregate grain size on the strength properties and modulus of elasticity of concrete. Appl Sci Basel. 2020;10(11):3918.10.3390/app10113918 ↗
29. Gettu R, Bazant ZP, Karr ME. Fracture properties and brittleness of high-strength concrete. ACI Mater J. 1990;87(6):608–18.
30. Ziętkowski, L. (2007). Investigation of the splitting of rock and concrete blocks using the electrohydraulic method [Doctoral dissertation, AGH University of Science and Technology]. AGH University of Science and Technology. (in Polish)
31. Bai J, Ge C, Liang J, Xu J. Recycled aggregate: a solution to sustainable concrete. Materials Basel. 2025;18(12):2706. https://doi.org/10.3390/ma18122706.10.3390/ma18122706 ↗
32. Kępniak M, Chyliński F, Łukowski P, Woyciechowski P. Recycled aggregate integration for enhanced performance of polymer concrete. Materials Basel. 2024;17(16):4007. https://doi.org/10.3390/ma17164007.10.3390/ma17164007 ↗
33. Rajprasad J, Arunvivek GK, Kumar P, et al. Interface improvement and multiscale assessment of recycled concrete aggregates with epoxy resin polymer. Sci Rep. 2026;16:3697. https://doi.org/10.1038/s41598-025-33852-4.10.1038/s41598-025-33852-4 ↗
34. Zhang Z, Ji Y, Wang D. Research progress on fiber-reinforced recycled brick aggregate concrete: a review. Polymers Basel. 2023;15(10):2316. https://doi.org/10.3390/polym15102316.10.3390/polym15102316 ↗
35. Basit A, Hameed R, Abbas S, Karam MS, Shahzad S, Kazmi SMS, et al. Impact of recycled concrete and brick aggregates on the flexural and bond performance of reinforced concrete. Appl Sci Basel. 2024;14(7):2719. https://doi.org/10.3390/app14072719.10.3390/app14072719 ↗