Engineered metallic interlayers for controlled part-substrate detachment in wire arc additive manufacturing
Source abstract
Abstract
Abstract Substrate removal in Wire Arc Additive Manufacturing is a complex, laborious process, especially for intricate geometries. This study investigates a novel release strategy using engineered metallic interlayers to induce controlled fracture at the part-substrate interface. To validate this, ER70S-6 steel walls were deposited onto S355 substrates utilising copper and aluminium interlayers. Deposition speed was varied to control interlayer dilution and assess its impact on microstructural and mechanical responses. Bonding integrity and strength were evaluated via SEM–EDS, computed tomography, microhardness mapping, and monotonic/cyclic tensile testing. Results demonstrate that engineered interlayers significantly reduce part-substrate interface strength, enabling detachment with minimal force. Specifically, copper promoted extensive interfacial solidification cracking, allowing separation at the lowest applied loads. Conversely, aluminium caused localised interfacial thinning, enabling controlled detachment through geometric weakening rather than extensive internal damage. Furthermore, microhardness profiles revealed localised embrittlement, contributing to the overall weakening mechanism. In this way, the current research validates the use of engineered metallic interlayers as a cost-effective, non-destructive method for substrate removal, offering a scalable solution to automate post-processing in industrial WAAM workflows.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Cellular and Composite Structures · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Hai A, et al. Additive manufacturing in the aerospace and automotive industries : recent trends and role in achieving sustainable development goals. Ain Shams Eng J. 2023;14(11):102516. https://doi.org/10.1016/j.asej.2023.102516.10.1016/j.asej.2023.102516 ↗
2. Cem S, Xiao B. A market assessment of additive manufacturing potential for the aerospace industry. J Manuf Process. 2021;68(PA):728–38. https://doi.org/10.1016/j.jmapro.2021.05.072.10.1016/j.jmapro.2021.05.072 ↗
3. Ding D, Pan Z, Cuiuri D, Li H. Wire-feed additive manufacturing of metal components: technologies, developments and future interests. Int J Adv Manuf Technol. 2015;81(1–4):465–81. https://doi.org/10.1007/s00170-015-7077-3.10.1007/s00170-015-7077-3 ↗
4. Srivastava M, Rathee S, Tiwari A, Dongre M. Wire arc additive manufacturing of metals : a review on processes , materials and their behaviour. Mater Chem Phys. 2023. https://doi.org/10.1016/j.matchemphys.2022.126988.10.1016/j.matchemphys.2022.126988 ↗
5. J. Yang, M. A. Wadee, and L. Gardner, “Thin-Walled Structures Strengthening of hot-rolled S355 steel I-section beams using WAAM high strength steel,” vol. 215, no. February, 2025.10.1016/j.tws.2025.113437 ↗
6. Andrade D, Zhu C, Miranda H, Rodrigues D. Metallic 2D and 3D re-entrant honeycomb auxetics produced by WAAM. Int J Adv Manuf Technol. 2024;135(11):5733–45. https://doi.org/10.1007/s00170-024-14863-3.10.1007/s00170-024-14863-3 ↗
7. Andrade DG, Tankova T, Zhu C, Branco R, Simões da L, Rodrigues DM. Mechanical properties of 3D printed CMT-WAAM 316 LSi stainless steel walls. J Constr Steel Res. 2024. https://doi.org/10.1016/j.jcsr.2024.108527.10.1016/j.jcsr.2024.108527 ↗
8. Tripathi U, Saini N, Mulik RS, Mahapatra MM. Effect of build direction on the microstructure evolution and their mechanical properties using GTAW based wire arc additive manufacturing. CIRP J Manuf Sci Technol. 2022;37:103–9. https://doi.org/10.1016/j.cirpj.2022.01.010.10.1016/j.cirpj.2022.01.010 ↗
9. Saleh YN, Mourad SA, Salem HG, Ibrahim AM. Residual stress and distortion analysis in WAAM steel blocks : a comparative study of build strategies. Structures. 2025. https://doi.org/10.1016/j.istruc.2025.108798.10.1016/j.istruc.2025.108798 ↗
10. Gupta DK, Mulik RS. Thermo-mechanical modeling and experimental validation of residual stresses in ER70S-6 component manufactured by WAAM process. Weld World. 2025;69(11):3351–69. https://doi.org/10.1007/s40194-025-02097-0.10.1007/s40194-025-02097-0 ↗
11. Kraus M, Winkler P, Hammer S, Reimann J, Hildebrand J, Bergmann JP. Geometric imperfections of additive manufactured members. Eng Struct. 2022. https://doi.org/10.1016/j.engstruct.2021.113596.10.1016/j.engstruct.2021.113596 ↗
12. Haselhuhn AS, Wijnen B, Anzalone GC, Sanders PG, Pearce JM. In situ formation of substrate release mechanisms for gas metal arc weld metal 3-D printing. J Mater Process Technol. 2015;226:50–9. https://doi.org/10.1016/j.jmatprotec.2015.06.038.10.1016/j.jmatprotec.2015.06.038 ↗
13. Jafari D, Vaneker THJ, Gibson I. Wire and arc additive manufacturing: opportunities and challenges to control the quality and accuracy of manufactured parts. Mater Des. 2021;202:109471. https://doi.org/10.1016/j.matdes.2021.109471.10.1016/j.matdes.2021.109471 ↗
14. C. R. Cunningham et al., “Cost modelling and sensitivity analysis of wire and arc additive manufacturing,” vol. 11, no. June 2017, pp. 650–657, 2021, https://doi.org/10.1016/j.promfg.2017.07.163.10.1016/j.promfg.2017.07.163 ↗
15. M. A. Gibson et al., “Multi-part removable support structures,” U.S. Pat. US10272492B2, Jul. 2019.
16. J. S. Myerberg et al., “Sinterable article with removable support structures,” U.S. Pat. US10350682B2, 2019.
17. Peter Alfons Schmitt et al., “Fabricating multi-part assemblies,” U.S. Pat. US9815118B1, 2017.
18. M. A. Gibson et al., “Fabricating an interface layer for removable support,” U.S. Pat. US9833839B2, 2017.
19. A. A. P. Doll, Christopher Michael Haid, Forrest W. Pieper, and Mateo Pena, “Automated three-dimensional printer part removal,” U.S. Pat. US9289946B2, 2016.
20. Haselhuhn AS, et al. Substrate release mechanisms for gas metal arc weld 3D aluminum metal printing. 3D Print Addit Manuf. 2014;1(4):204–9. https://doi.org/10.1089/3dp.2014.0015.10.1089/3dp.2014.0015 ↗
21. D. J. L. A. Harrison, “System and method of controlling attachment and release of additive manufacturing builds using a welding process,” U.S. Pat. US20170008114A1, 2017.
22. R. W. Messler Jr, Principles of welding: processes, physics, chemistry, and metallurgy. John Wiley \& Sons, 2024.
23. Li T, Wang Z, Hu S, Yang Z, Wang Y. Hot cracking during the fabrication of Inconel 625/stainless steel 308 L functionally graded material by dual-wire arc additive manufacturing. J Manuf Process. 2022;82(August):461–73. https://doi.org/10.1016/j.jmapro.2022.08.018.10.1016/j.jmapro.2022.08.018 ↗
24. Manohar G, Kumar A, Thapliyal S, Mamedipaka R. Investigating the performance of aluminium-steel bimetallic structure fabricated through wire and arc additive manufacturing with interlayer approach. Structures. 2025;72(January):108304. https://doi.org/10.1016/j.istruc.2025.108304.10.1016/j.istruc.2025.108304 ↗
25. Li X, Scherf A, Heilmaier M, Stein F. The Al-rich part of the Fe-Al phase diagram. J Phase Equilibria Diffus. 2016;37(2):162–73. https://doi.org/10.1007/s11669-015-0446-7.10.1007/s11669-015-0446-7 ↗
26. Zhang Y, Zhao T, Yu X, Huang J. The Al-Fe intermetallic compounds and the atomic diffusion behavior at the interface of aluminum-steel welded joint. Metals. 2023. https://doi.org/10.3390/met13020334.10.3390/met13020334 ↗
27. Spies OR. Structure and properties of alloys. J Franklin Inst. 2009;248(4):356. https://doi.org/10.1016/0016-0032(49)90961-8.10.1016/0016-0032(49)90961-8 ↗
28. Xu M, Zhang H, Yuan T, Yan Z, Chen S. Microstructural characteristics and cracking mechanism of Al-Cu alloys in wire arc additive manufacturing. Mater Charact. 2023;197(November 2022):112677. https://doi.org/10.1016/j.matchar.2023.112677.10.1016/j.matchar.2023.112677 ↗
29. Andrade DG, Zhu C, Miranda HC, Rodrigues DM. Thermal, microstructural, and mechanical analysis of complex lattice structures produced by direct energy deposition. Materials. 2024. https://doi.org/10.3390/ma17122813.10.3390/ma17122813 ↗
30. Dantec Dynamics, “Istra4D Software Operation Manual.” Oct. 2024.
31. Aldalur E, Veiga F, Suárez A, Bilbao J, Lamikiz A. High deposition wire arc additive manufacturing of mild steel: strategies and heat input effect on microstructure and mechanical properties. J Manuf Process. 2020;58(September):615–26. https://doi.org/10.1016/j.jmapro.2020.08.060.10.1016/j.jmapro.2020.08.060 ↗
32. Lin Z, Goulas C, Ya W, Hermans MJM. Microstructure and mechanical properties of medium carbon steel deposits obtained via wire and arc additive manufacturing using metal-cored wire. Metals. 2019. https://doi.org/10.3390/met9060673.10.3390/met9060673 ↗
33. Ahmed N, Barsoum I, Abu Al-Rub RK. Numerical investigation of residual stresses in thin-walled additively manufactured structures from selective laser melting. Heliyon. 2023;9(9):e19385. https://doi.org/10.1016/j.heliyon.2023.e19385.10.1016/j.heliyon.2023.e19385 ↗
34. Rinne J, Seffer O, Nothdurft S, Hermsdorf J, Kaierle S, Overmeyer L. Investigations on the weld metal composition and associated weld metal cracking in laser beam welded steel copper dissimilar joints. J Mater Process Technol. 2021;296:117178. https://doi.org/10.1016/j.jmatprotec.2021.117178.10.1016/j.jmatprotec.2021.117178 ↗
35. Martendal CP, et al. Effects of beam shaping on copper-steel interfaces in multi-material laser beam powder bed fusion. J Mater Process Technol. 2024. https://doi.org/10.1016/j.jmatprotec.2024.118344.10.1016/j.jmatprotec.2024.118344 ↗
36. Gao Z, Yang Y, Wang L, Zhou B, Yan F. Formation mechanism and control of solidification cracking in laser‐welded joints of steel/copper dissimilar metals. Metals. 2022. https://doi.org/10.3390/met12071147.10.3390/met12071147 ↗
37. D. J. Tillack, “Nickel alloys and stainless steels for elevated temperature service: weldability considerations NiDI NICKEL DEVELOPMENT INSTITUTE NiDI Reprint Series NQ 14 053,” Proc. from Mater. Solut. ’97 Join. Repair Gas Turbine Components, no. September, p. 16, 1997.
38. Wallerstein D, Riveiro A, del Val J, Comesaña R, Lusquiños F, Pou J. Developments in laser welding of aluminum alloys. Adv Weld Deform. 2021. https://doi.org/10.1016/B978-0-12-822049-8.00005-0.10.1016/B978-0-12-822049-8.00005-0 ↗
39. Patel NP, Sharma DK, Upadhyay GH. ‘Effect of activated fluxes on weld penetration and mechanism responsible for deeper penetration of stainless steels’—a review. Curr Adv Mech Eng Sel Proc ICRAMERD. 2021;2020:737–46.10.1007/978-981-33-4795-3_67 ↗
40. Rodrigues TA, et al. Steel-copper functionally graded material produced by twin-wire and arc additive manufacturing (T-WAAM). Mater Des. 2022;213:110270. https://doi.org/10.1016/j.matdes.2021.110270.10.1016/j.matdes.2021.110270 ↗