journal article·2026-05-15Open access

Advanced spatial processing of the cyclic spectral coherence map and its application to bearing fault detection in electric motors

Justyna Hebda-Sobkowicz, Anna Michalak, Jacek Wodecki, Radosław Zimroz, Krzysztof Szabat, Marcin Wolkiewicz, Agnieszka Wyłomańska

Abstract

Abstract Rolling element bearings are critical components in machinery whose early detection of faults is essential. Faulty bearings generate vibration signals characterised by cyclic impulses that correspond to the specific fault. Cyclic spectral coherence (CSC) is a valuable tool for identifying these faults; however, the automated interpretation of CSC results remains challenging, particularly when dealing with signals that have a low signal-to-noise ratio. This study aims to address this limitation by introducing statistical measures as weighting vectors to enhance fault detection. Specifically, the proposed method employs a frequency band selector (based on the carrier frequency f) and a fault frequency selector (based on the modulation frequency $$\alpha$$ ). The fault frequency selector can be considered an improved EES-like vector (IEES, Approach 1). Both selection vectors are used to reconstruct a map highlighting informative components. This denoised map is then aggregated to reconstruct the EES (REES, Approach 2). Finally, REES can be used as a 2D spatial filter applied to the original CSC map, resulting in a novel filtered CSC map. This filtered map is then aggregated to produce a filtered EES (FEES, Approach 3). The study presents three approaches, each utilizing two sparsity statistics: kurtosis and conditional variance. Validation using vibration data from two test rigs, as well as simulation and real vibration data, demonstrates that the proposed approach outperforms classical methods in terms of effectiveness.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Machine Fault Diagnosis Techniques · Fault Detection and Control Systems · Gear and Bearing Dynamics Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Antoni J, Bonnardot F, Raad A, El Badaoui M. Cyclostationary modelling of rotating machine vibration signals. Mech Syst Signal Process. 2004;18(6):1285–314.10.1016/S0888-3270(03)00088-8 ↗
2. Antoni J. Cyclic spectral analysis of rolling-element bearing signals: facts and fictions. J Sound Vib. 2007a;304(3):497–529.10.1016/j.jsv.2007.02.029 ↗
3. Borghesani P, Pennacchi P, Ricci R, Chatterton S. Testing second order cyclostationarity in the squared envelope spectrum of non-white vibration signals. Mech Syst Signal Process. 2013;40(1):38–55.10.1016/j.ymssp.2013.05.012 ↗
4. Antoni J, Borghesani P. A statistical methodology for the design of condition indicators. Mech Syst Signal Process. 2019;114:290–327.10.1016/j.ymssp.2018.05.012 ↗
5. Raad A, Antoni J, Sidahmed M. Indicators of cyclostationarity: Theory and application to gear fault monitoring. Mech Syst Signal Process. 2008;22(3):574–87.10.1016/j.ymssp.2007.09.011 ↗
6. Pancaldi F, Rubini R, Cocconcelli M. Time-varying metrics of cyclostationarity for bearing diagnostic. Mech Syst Signal Process. 2021;151:107329.10.1016/j.ymssp.2020.107329 ↗
7. Antoni J. Cyclostationarity by examples. Mech Syst Signal Process. 2009;23(4):987–1036.10.1016/j.ymssp.2008.10.010 ↗
8. Antoni J, Xin G, Hamzaoui N. Fast computation of the spectral correlation. Mech Syst Signal Process. 2017;92:248–77.10.1016/j.ymssp.2017.01.011 ↗
9. Wang D, Zhao X, Kou L-L, Qin Y, Zhao Y, Tsui K-L. A simple and fast guideline for generating enhanced/squared envelope spectra from spectral coherence for bearing fault diagnosis. Mech Syst Signal Process. 2019;122:754–68.10.1016/j.ymssp.2018.12.055 ↗
10. Mauricio A, Smith WA, Randall RB, Antoni J, Gryllias K. Improved envelope spectrum via feature optimisation-gram (iesfogram): A novel tool for rolling element bearing diagnostics under non-stationary operating conditions. Mech Syst Signal Process. 2020;144:106891.10.1016/j.ymssp.2020.106891 ↗
11. Mauricio A, Qi J, Smith WA, Sarazin M, Randall RB, Janssens K, et al. Bearing diagnostics under strong electromagnetic interference based on integrated spectral coherence. Mech Syst Signal Process. 2020;140:106673.10.1016/j.ymssp.2020.106673 ↗
12. Mauricio A, Gryllias K. Cyclostationary-based multiband envelope spectra extraction for bearing diagnostics: The combined improved envelope spectrum. Mech Syst Signal Process. 2021;149:107150.10.1016/j.ymssp.2020.107150 ↗
13. Randall RB, Antoni J. Rolling element bearing diagnostics-A tutorial. Mech Syst Signal Process. 2011;25(2):485–520.10.1016/j.ymssp.2010.07.017 ↗
14. Antoni J, Randall R. The spectral kurtosis: application to the vibratory surveillance and diagnostics of rotating machines. Mech Syst Signal Process. 2006;20(2):308–31.10.1016/j.ymssp.2004.09.002 ↗
15. Obuchowski J, Wyłomańska A, Zimroz R. Selection of informative frequency band in local damage detection in rotating machinery. Mech Syst Signal Process. 2014;48(1–2):138–52.10.1016/j.ymssp.2014.03.011 ↗
16. Hebda-Sobkowicz J, Zimroz R, Wyłomańska A. Selection of the informative frequency band in a bearing fault diagnosis in the presence of non-Gaussian noise-comparison of recently developed methods. Appl Sci. 2020;10(8):2657.10.3390/app10082657 ↗
17. Antoni J. Cyclic spectral analysis in practice. Mech Syst Signal Process. 2007b;21(2):597–630.10.1016/j.ymssp.2006.08.007 ↗
18. Antoni J. Fast computation of the kurtogram for the detection of transient faults. Mech Syst Signal Process. 2007c;21(1):108–24.10.1016/j.ymssp.2005.12.002 ↗
19. Barszcz T, Jabłoński A. A novel method for the optimal band selection for vibration signal demodulation and comparison with the Kurtogram. Mech Syst Signal Process. 2011;25(1):431–51.10.1016/j.ymssp.2010.05.018 ↗
20. Liu S, Hou S, He K, Yang W. L-kurtosis and its application for fault detection of rolling element bearings. Measurement. 2018;116:523–32.10.1016/j.measurement.2017.11.049 ↗
21. Zhong J, Wang D, Li C. A nonparametric health index and its statistical threshold for machine condition monitoring. Measurement. 2021;167:108290.10.1016/j.measurement.2020.108290 ↗
22. Jaworski P, Pitera M. The 20–60-20 rule. Discrete and Continuous Dynamical Systems - Series B. 2016;21(4):1149–66.10.3934/dcdsb.2016.21.1149 ↗
23. Hebda-Sobkowicz J, Zimroz R, Pitera M, Wyłomańska A. Informative frequency band selection in the presence of non-Gaussian noise - a novel approach based on the conditional variance statistic with application to bearing fault diagnosis. Mech Syst Signal Process. 2020;145:106971.10.1016/j.ymssp.2020.106971 ↗
24. Antoni J. The infogram: Entropic evidence of the signature of repetitive transients. Mech Syst Signal Process. 2016;74:73–94.10.1016/j.ymssp.2015.04.034 ↗
25. Hebda-Sobkowicz J, Zimroz R, Wyłomańska A, Antoni J. Infogram performance analysis and its enhancement for bearings diagnostics in presence of non-Gaussian noise. Mech Syst Signal Process. 2022;170:108764.10.1016/j.ymssp.2021.108764 ↗
26. Zhou N, Cheng Y, Wang Z, Chen B, Zhang W. Cffsgram: A candidate fault frequencies-based optimal demodulation band selection method for axle-box bearing fault diagnosis. Measurement. 2023;207:112368.10.1016/j.measurement.2022.112368 ↗
27. Cheng Y, Zhou N, Wang Z, Chen B, Zhang W. Cffsbd: A candidate fault frequencies-based blind deconvolution for rolling element bearings fault feature enhancement. IEEE Trans Instrum Meas. 2023;72:1–12.10.1109/TIM.2023.3326234 ↗
28. Li Y, Zhang B, Lin J, Zhao M. Seackgram: A spectral entropy assisted cyclic kurtosis gram for compound fault diagnosis of rolling element bearings. Measurement. 2023;210:112396.
29. Zhang B, Lin J, Zhang B, Li H. Lfigram: Local fault information gram for early fault detection of rolling element bearings. Measurement. 2022;192:110866.
30. Cui L, Zhao X, Liu D, Wang H. A spectral coherence cyclic periodic index optimization-gram for bearing fault diagnosis. Measurement. 2024a;224:113898.10.1016/j.measurement.2023.113898 ↗
31. Wu K, Tong W, Xie J, Wang F, Huang B, Wu D. Optimal weighted envelope spectrum: An enhanced demodulation method for extracting specific characteristic frequency of rotating machinery. Mech Syst Signal Process. 2024;211:111165.10.1016/j.ymssp.2024.111165 ↗
32. Wodecki J, Michalak A, Zimroz R, Barszcz T, Wyłomańska A. Impulsive source separation using combination of nonnegative matrix factorization of bi-frequency map, spatial denoising and monte carlo simulation. Mech Syst Signal Process. 2019;127:89–101.10.1016/j.ymssp.2019.02.052 ↗
33. Wang D. Spectral l2/l1 norm: A new perspective for spectral kurtosis for characterizing non-stationary signals. Mech Syst Signal Process. 2018;104:290–3.10.1016/j.ymssp.2017.11.013 ↗
34. Cheng Y, Wang S, Chen B, Mei G, Zhang W, Peng H, et al. An improved envelope spectrum via candidate fault frequency optimization-gram for bearing fault diagnosis. J Sound Vib. 2022;523:116746.10.1016/j.jsv.2022.116746 ↗
35. Chen Z, Mauricio A, Li W, Gryllias K. A deep learning method for bearing fault diagnosis based on cyclic spectral coherence and convolutional neural networks. Mech Syst Signal Process. 2020;140:106683.10.1016/j.ymssp.2020.106683 ↗
36. Lee J-H. A weighting function for improvement of spectral coherence based envelope spectrum. Mech Syst Signal Process. 2021;160:107929.10.1016/j.ymssp.2021.107929 ↗
37. Cui L, Zhao X, Liu D, Wang H. A spectral coherence cyclic periodic index optimization-gram for bearing fault diagnosis. Measurement. 2024b;224:113898.10.1016/j.measurement.2023.113898 ↗
38. Chen B, Cheng Y, Zhang W, Gu F. Enhanced bearing fault diagnosis using integral envelope spectrum from spectral coherence normalized with feature energy. Measurement. 2022;189:110448.10.1016/j.measurement.2021.110448 ↗
39. Zhang B, Miao Y, Lin J, Li H. Weighted envelope spectrum based on the spectral coherence for bearing diagnosis. ISA Trans. 2022;123:398–412.10.1016/j.isatra.2021.05.012 ↗
40. Kuzio D, Żuławiński W, Zimroz R, Wyłomańska A. Development of novel health indicators based on statistical analysis of cyclic spectral coherence maps and their application to local damage detection. Mech Syst Signal Process. 2025;236:112893.10.1016/j.ymssp.2025.112893 ↗
41. Sun W, Zhao X, Liu D, Cui L. Iesfsiogram: A novel adaptive method for optimal demodulation band determination in bearing fault diagnosis. Measurement. 2025;246:116554.10.1016/j.measurement.2024.116554 ↗
42. Zheng J. Rolling bearing fault diagnosis based on partially ensemble empirical mode decomposition and variable predictive model-based class discrimination. Archives of Civil and Mechanical Engineering. 2016;16(4):784–94.10.1016/j.acme.2016.05.003 ↗
43. Wodecki J, Michalak A. Fault-related impulsive component detection for vibration-based diagnostics in the presence of random impulsive noise. In IOP Conference Series Earth and Environmental Science. 2021;942:012016 (IOP Publishing).10.1088/1755-1315/942/1/012016 ↗
44. Yesilyurt I. The application of the conditional moments analysis to gearbox fault detection-a comparative study using the spectrogram and scalogram. NDT & E International. 2004;37(4):309–20.10.1016/j.ndteint.2003.10.005 ↗
45. Kruczek P, Obuchowski J, Wyłomańska A, Zimroz R. Multiple local damage detection in gearbox by novel coherent bi-frequency map and its spatial, cycle oriented enhancement. Appl Acoust. 2019;144:23–30.10.1016/j.apacoust.2017.10.006 ↗
46. Pan X, Liu Z, Xu R, Luo J, Shen Y, Qiu J, et al. Early warning of damaged wind turbine blades using spatial-temporal spectral analysis of acoustic emission signals. J Sound Vib. 2022;537:117209.10.1016/j.jsv.2022.117209 ↗
47. Westfall PH. Kurtosis as peakedness 1905–2014. r.i.p. Am Stat. 2014;68(3):191–5.10.1080/00031305.2014.917055 ↗
48. Joanes D, Gill C. Comparing measures of sample skewness and kurtosis. Journal of the Royal Statistical Society Series D (The Statistician). 1998;47(1):183–9.
49. Jelito D, Pitera M. New fat-tail normality test based on conditional second moments with applications to finance. Stat Pap. 2021;62(5):2083–108.10.1007/s00362-020-01176-2 ↗
50. Zhang H, Borghesani P, Randall RB, Peng Z. A benchmark of measurement approaches to track the natural evolution of spall severity in rolling element bearings. Mech Syst Signal Process. 2022;166:108466.10.1016/j.ymssp.2021.108466 ↗
51. Tandon N, Choudhury A, et al. Wind turbine high-speed bearing prognostics benchmark. Appl Acoust. 2017;120:1–12.