Numerical analysis of residual tensile properties and strain rate sensitivity of textile reinforced mortar interface behavior after thermal exposure
Source abstract
Abstract
Abstract This study presents a comprehensive finite element (FE) investigation of Textile-Reinforced Mortar (TRM) composites subjected to uniaxial tensile loading at temperatures of 20, 200, and 400 °C. A detailed micro-modeling approach with cohesive zone models was implemented to characterize the complex interface mechanics between textile reinforcement and mortar matrix. The numerical models were rigorously validated against experimental data from tensile tests and Digital Image Correlation (DIC) measurements, demonstrating excellent agreement with deviations below 7%. The research identified critical interface parameters governing TRM behavior, including normal and tangential stiffness components, strength limits, and damage evolution characteristics across different temperature regimes. Results revealed distinct temperature-dependent transitions in failure mechanisms, shifting from predominantly shear-dominated behavior at ambient temperature to slip-dominated responses at elevated temperatures. A notable finding was the enhanced mechanical performance at 200 °C, attributed to improved fiber-matrix interface properties, followed by severe degradation at 400 °C. Parametric sensitivity analyses identified key relationships between interface parameters and mechanical response, with a critical threshold temperature at 200 °C where interface properties showed heightened sensitivity to parameter variations. Extended numerical simulations indicated potential loading-rate dependency, particularly pronounced at elevated temperatures. This work provides essential insights into the thermal degradation mechanisms of TRM systems and establishes a robust numerical framework for predicting their residual performance after thermal exposure, providing a foundational framework for multi-hazard assessment.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Masonry and Concrete Structural Analysis · Structural Analysis and Optimization · Fire effects on concrete materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Guibaud A, Mindeguia J-C, Albuerne A, Parent T, Torero J. Notre-Dame de Paris as a validation case to improve fire safety modelling in historic buildings. J Cult Herit. 2024;65:145–54. https://doi.org/10.1016/j.culher.2023.05.008.10.1016/j.culher.2023.05.008 ↗
2. Parent T, Brocato M, Colas AS, Domede N, Dubois F, Garnier D, et al. A multi-model structural analysis of the vaults of Notre-Dame de Paris Cathedral after the 2019 fire and a proposal for a hybrid model merging continuum and discrete approaches. J Cult Herit. 2024;65:135–44. https://doi.org/10.1016/J.CULHER.2023.05.009.10.1016/J.CULHER.2023.05.009 ↗
3. Ferreira TM. Notre Dame Cathedral: another case in a growing list of heritage landmarks destroyed by fire. Fire Basel. 2019;2:1–2. https://doi.org/10.3390/fire2020020.10.3390/fire2020020 ↗
4. Kirby P. Historic Copenhagen stock exchange in Denmark goes up in flames. https://www.bbc.com/news/world-europe-68824189, 2024 (accessed December 20, 2024).
5. Jones MW, Kelley DI, Burton CA, Di Giuseppe F, Barbosa MLF, Brambleby E, et al. State of wildfires 2023–2024. Earth Syst Sci Data. 2024;16:3601–85. https://doi.org/10.5194/essd-16-3601-2024.10.5194/essd-16-3601-2024 ↗
6. Wildfires in the EU. 2022 was the second-worst year, a warning from a changing climate. https://joint-research-centre.ec.europa.eu/jrc-news-and-updates/wildfires-eu-2022-was-second-worst-year-warning-changing-climate-2023-11-22_en, 2023 (accessed December 20, 2024).
7. Schug F, Bar-Massada A, Carlson AR, Cox H, Hawbaker TJ, Helmers D, et al. The global wildland–urban interface. Nature. 2023;621:94–9. https://doi.org/10.1038/s41586-023-06320-0.10.1038/s41586-023-06320-0 ↗
8. International Code Council (ICC), AC434 Masonry and Concrete Strengthening Using Fabric-Reinforced Cementitious Matrix (FRCM) and Steel Reinforced Grout (SRG) Composite Systems. (2022) 21. https://shop.iccsafe.org/ac434-masonry-and-concrete-strengthening-using-fabric-reinforced-cementitious-matrix-frcm-and-steel-reinforced-grout-srg-composite-systems-approved-october-2018-editorially-revised-december-2022-pdf-download.html
9. de Felice G, Aiello MA, Caggegi C, Ceroni F, De Santis S, Garbin E, et al. Recommendation of RILEM Technical Committee 250-CSM: test method for textile reinforced mortar to substrate bond characterization. Mater Struct. 2018;51:95. https://doi.org/10.1617/s11527-018-1216-x.10.1617/s11527-018-1216-x ↗
10. ACI 549.6R-20. Guide to Design and Construction of Externally Bonded Fabric-Reinforced Cementitious Matrix and Steel-Reinforced Grout Systems for Repair and Strengthening of Concrete Structures. Farmington: American Concrete Institute; 2020.
11. CNR-DT 215/. 2018 Istruzioni per la Progettazione, l’Esecuzione ed il Controllo di Interventi di Consolidamento Statico mediante l’utilizzo di Compositi Fibrorinforzati a Matrice Inorganica, (n.d.).
12. Pereiro-Barceló J, Pomares-Torres JC, González-Sánchez A, Torres B. Mechanical behaviour of TRM and FRP-reinforced concrete voussoir masonry specimens. Eur J Environ Civ Eng. 2024. https://doi.org/10.1080/19648189.2024.2343874.10.1080/19648189.2024.2343874 ↗
13. Carozzi FG, Poggi C, Bertolesi E, Milani G. Ancient masonry arches and vaults strengthened with TRM, SRG and FRP composites: experimental evaluation. Compos Struct. 2018;187:466–80. https://doi.org/10.1016/j.compstruct.2017.12.075.10.1016/j.compstruct.2017.12.075 ↗
14. Caggegi C, Carozzi FG, De Santis S, Fabbrocino F, Focacci F, Hojdys Ł, et al. Experimental analysis on tensile and bond properties of PBO and aramid fabric reinforced cementitious matrix for strengthening masonry structures. Compos B Eng. 2017;127:175–95. https://doi.org/10.1016/J.COMPOSITESB.2017.05.048.10.1016/J.COMPOSITESB.2017.05.048 ↗
15. D’Ambrisi A, Focacci F, Caporale A. Strengthening of masonry–unreinforced concrete railway bridges with PBO-FRCM materials. Compos Struct. 2013;102:193–204. https://doi.org/10.1016/J.COMPSTRUCT.2013.03.002.10.1016/J.COMPSTRUCT.2013.03.002 ↗
16. de Felice G, Aiello MA, Caggegi C. Recommendation of RILEM Technical Committee 250-CSM: Test method for textile reinforced mortar to substrate bond characterization. Mater Struct. 2018. https://doi.org/10.1617/s11527-018-1216-x.10.1617/s11527-018-1216-x ↗
17. Papanicolaou CC, Triantafillou T. Performance of TRM/TRC systems under elevated temperatures and fire conditions. In: Mobasher B, Silva F, editors. Materials, Analysis, Structural Design and Applications of Textile Reinforced Concrete/Fabric Reinforced Cementitious Matrix. United States: American Concrete Institute; 2021. p. 32–46.
18. Liapopoulou M, Bompa DV, Elghazouli AY. In and out of plane behaviour of TRM strengthened heritage masonry elements. Constr Build Mater. 2024;448:138152. https://doi.org/10.1016/j.conbuildmat.2024.138152.10.1016/j.conbuildmat.2024.138152 ↗
19. Azimi N, Schollbach K, Oliveira DV, Lourenço PB. Effect of acidic environment exposure on mechanical properties of TRM composites. Constr Build Mater. 2024;438:137142. https://doi.org/10.1016/j.conbuildmat.2024.137142.10.1016/j.conbuildmat.2024.137142 ↗
20. Yang P, Krevaikas T. Experimental and analytical investigation of the tensile mechanism of textile-reinforced mortar (TRM) composites and fabric grids in elevated temperatures. Constr Build Mater. 2024;431:136495. https://doi.org/10.1016/J.CONBUILDMAT.2024.136495.10.1016/J.CONBUILDMAT.2024.136495 ↗
21. Misseri G, Stipo G, Galassi S, Rovero L. Bond Behavior of TRM Systems and Reinforcement of Masonry Arches: Testing and Modelling, (2020) 558–70. https://doi.org/10.1007/978-3-030-41057-510.1007/978-3-030-41057-5 ↗
22. Wang X, Chiu C, Pan V. Bond behaviour of steel-TRM composites for strengthening masonry elements : experimental testing and numerical modelling. Constr Build Mater. 2020;253:119157. https://doi.org/10.1016/j.conbuildmat.2020.119157.10.1016/j.conbuildmat.2020.119157 ↗
23. Dalalbashi A, Ghiassi B, Oliveira DV, Freitas A. Fiber-to-mortar bond behavior in TRM composites: effect of embedded length and fiber configuration. Compos B Eng. 2018;152:43–57. https://doi.org/10.1016/J.COMPOSITESB.2018.06.014.10.1016/J.COMPOSITESB.2018.06.014 ↗
24. Raoof SM, Bournas DA. TRM versus FRP in flexural strengthening of RC beams : behaviour at high temperatures. Constr Build Mater. 2017;154:424–37. https://doi.org/10.1016/j.conbuildmat.2017.07.195.10.1016/j.conbuildmat.2017.07.195 ↗
25. Dinh NH, Tran HV, Choi K-K. Direct shear behavior after elevated temperature exposure of epoxy-coated carbon textile-reinforced mortar (TRM) modified with different types of microfibers. Mater Struct. 2021;54:151. https://doi.org/10.1617/s11527-021-01748-0.10.1617/s11527-021-01748-0 ↗
26. Junaid K, Algourdin N, Mesticou Z, Cai G, Si Larbi A. The influence of high temperature exposure on the tensile and cracking behavior of crimped-textile reinforced mortar composites (TRMs). Constr Build Mater. 2024;439:137350. https://doi.org/10.1016/j.conbuildmat.2024.137350.10.1016/j.conbuildmat.2024.137350 ↗
27. Estevan L, Torres B, Baeza FJ, Varona FB, Ivorra S. Masonry walls strengthened with textile reinforced mortars (TRM) and subjected to in-plane cyclic loads after real fire exposure. Eng Struct. 2023. https://doi.org/10.1016/j.engstruct.2023.116922.10.1016/j.engstruct.2023.116922 ↗
28. Estevan L, Torres B, Varona FB, Baeza FJ, Ivorra S. Shear strengthening of masonry walls with textile reinforced mortars (TRM) under high temperature exposure. J Build Eng. 2023. https://doi.org/10.1016/j.jobe.2022.105511.10.1016/j.jobe.2022.105511 ↗
29. Abdulla KF, Cunningham LS, Gillie M. Simulating masonry wall behaviour using a simplified micro-model approach. Eng Struct. 2017;151:349–65. https://doi.org/10.1016/J.ENGSTRUCT.2017.08.021.10.1016/J.ENGSTRUCT.2017.08.021 ↗
30. Sarhosis V, Lemos JV. A detailed micro-modelling approach for the structural analysis of masonry assemblages. Comput Struct. 2018;206:66–81. https://doi.org/10.1016/J.COMPSTRUC.2018.06.003.10.1016/J.COMPSTRUC.2018.06.003 ↗
31. D’Altri AM, de Miranda S, Castellazzi G, Sarhosis V. A 3D detailed micro-model for the in-plane and out-of-plane numerical analysis of masonry panels. Comput Struct. 2018;206:18–30. https://doi.org/10.1016/J.COMPSTRUC.2018.06.007.10.1016/J.COMPSTRUC.2018.06.007 ↗
32. Ghiga DA, Aranu N, Ungureanu D, Isopescu DN, Oprian G, Huditeanu I. A detailed micro-modelling approach for the diagonal compression test of strengthened stone masonry walls. IOP Conf Ser Mater Sci Eng. 2020. https://doi.org/10.1088/1757-899X/916/1/012041.10.1088/1757-899X/916/1/012041 ↗
33. Scacco J, Milani G, Lourenço PB. A micro-modeling approach for the prediction of TRM bond performance on curved masonry substrates. Compos Struct. 2021. https://doi.org/10.1016/j.compstruct.2020.113065.10.1016/j.compstruct.2020.113065 ↗
34. Giordano E, Masciotta MG, Clementi F, Ghiassi B. Numerical prediction of the mechanical behavior of TRM composites and TRM-strengthened masonry panels. Constr Build Mater. 2023. https://doi.org/10.1016/j.conbuildmat.2023.132376.10.1016/j.conbuildmat.2023.132376 ↗
35. Funari MF, Lonetti P, Pascuzzo A. A moving cohesive mesh formulation to predict debonding phenomena in layered structures. Comput Eng Phys Model. 2018;1:16–26. https://doi.org/10.22115/cepm.2018.132122.1028.10.22115/cepm.2018.132122.1028 ↗
36. Gao X, Su C. Cohesive model of complex friction behaviors in reinforcement-concrete interfaces. Constr Build Mater. 2023;402:132898. https://doi.org/10.1016/J.CONBUILDMAT.2023.132898.10.1016/J.CONBUILDMAT.2023.132898 ↗
37. Śliwa-Wieczorek K, La Scala A, Derkowski W, Binder E. Longitudinal shear in timber–concrete composites with flexible adhesive connections—experimental and numerical investigations. Materials. 2024. https://doi.org/10.3390/ma17246055.10.3390/ma17246055 ↗
38. Papanastasiou P, Sarris E. Cohesive zone models. Porous Rock Fract Mechanics: Application Hydraulic Fracturing Drill Struct Eng. 2017;119–44. https://doi.org/10.1016/B978-0-08-100781-5.00006-3.10.1016/B978-0-08-100781-5.00006-3 ↗
39. Li R, Xu Z, Zou X, Hu C, He X. A frictional cohesive zone model for characterizing transverse compression responses of unidirectional fiber-reinforced polymer composites. Mech Adv Mater Struct. 2023;30:2164–72. https://doi.org/10.1080/15376494.2022.2051103.10.1080/15376494.2022.2051103 ↗
40. Funari MF, da Silva LCM, Lonetti P, Spadea S, Lourenço PB. Numerical simulation of fracture in layered and sandwich structures: a systematic literature review. Compos Part C Open Access. 2022;9:100294. https://doi.org/10.1016/j.jcomc.2022.100294.10.1016/j.jcomc.2022.100294 ↗
41. Kumar M, Kumar P, Bhadauria SS. Numerical simulation of delamination growth in fiber reinforced polymer laminates using cohesive zone modeling. Mech Adv Mater Struct. 2022;29:213–29. https://doi.org/10.1080/15376494.2020.1758257.10.1080/15376494.2020.1758257 ↗
42. Liu B, Lai J, Liu H, Huang Z, Liu T, Xia Y, et al. Finite element analysis of the effect for different thicknesses and stitching densities under the low-velocity impact of stitched composite laminates. Polymers. 2023. https://doi.org/10.3390/polym15244628.10.3390/polym15244628 ↗
43. Al-Saawani MA, Al-Negheimish AI, El-Sayed AK, Alhozaimy AM. Finite element modeling of debonding failures in FRP-strengthened concrete beams using cohesive zone model. Polymers (Basel). 2022. https://doi.org/10.3390/polym14091889.10.3390/polym14091889 ↗
44. Baktheer A, Martínez-Pañeda E, Aldakheel F. Phase field cohesive zone modeling for fatigue crack propagation in quasi-brittle materials. Comput Methods Appl Mech Eng. 2024. https://doi.org/10.1016/j.cma.2024.116834.10.1016/j.cma.2024.116834 ↗
45. Armando LS, Pereiro-Barceló J, Foti D, Ivorra S, La Scala A, Pereiro-Barceló J, Foti D, Ivorra S. Detailed Numerical Micro-modelling of Masonry TRM Reinforcements, in: RILEM Bookseries, 2024: pp. 543–555. https://doi.org/10.1007/978-3-031-39450-8_4510.1007/978-3-031-39450-8_45 ↗
46. La Scala A, Theoretical and experimental study of different materials and structures subjected to fire loads, Thesis PD. Polytechnic University of Bari, 2024. https://doi.org/10.60576/poliba/iris/la-scala-armando_phd202410.60576/poliba/iris/la-scala-armando_phd2024 ↗
47. Estevan L, Varona FB, Baeza FJ, Torres B, Bru D. Textile reinforced mortars (TRM) tensile behavior after high temperature exposure. Constr Build Mater. 2022. https://doi.org/10.1016/j.conbuildmat.2022.127116.10.1016/j.conbuildmat.2022.127116 ↗
48. Estevan L, Baeza FJ, Varona FB, Pereiro J. Effect of high temperature on textile reinforced mortar-to-masonry bond. Constr Build Mater. 2023. https://doi.org/10.1016/j.conbuildmat.2023.132123.10.1016/j.conbuildmat.2023.132123 ↗
49. Ekenel M, Nanni A. F. De Caso y Basalo, Acceptance Criteria for Concrete and Masonry Strengthening Using Fabric-Reinforced Cementitious Matrix (FRCM) and Steel Reinforced Grout. SRG) Composites; 2018.
50. R.T.C. 232-T., Brameshuber W, Brameshuber W. Recommendation of RILEM TC 232-TDT: test methods and design of textile reinforced concrete. Mater Struct. 2016;49:4923–7. https://doi.org/10.1617/s11527-016-0839-z.10.1617/s11527-016-0839-z ↗
51. R.T.C. 200-HTC. Recommendation of RILEM TC 200-HTC: mechanical concrete properties at high temperatures—modelling and applications. Mater Struct. 2007;40:841–53. https://doi.org/10.1617/s11527-007-9285-2.10.1617/s11527-007-9285-2 ↗
52. Boem I. Masonry elements strengthened with TRM: a review of experimental, design and numerical methods. Buildings. 2022. https://doi.org/10.3390/buildings12091307.10.3390/buildings12091307 ↗
53. Gkournelos PD, Triantafillou TC. Out-of-plane behavior of in-plane damaged masonry infills retrofitted with TRM and thermal insulation. J Compos Constr. 2023;27:4023054. https://doi.org/10.1061/JCCOF2.CCENG-4324.10.1061/JCCOF2.CCENG-4324 ↗
54. Dalalbashi A, Ghiassi B, Oliveira DV, Freitas A. Effect of test setup on the fiber-to-mortar pull-out response in TRM composites: experimental and analytical modeling. Compos B Eng. 2018;143:250–68. https://doi.org/10.1016/J.COMPOSITESB.2018.02.010.10.1016/J.COMPOSITESB.2018.02.010 ↗
55. Lubliner J, Oliver J, Oller S, Oñate E. A plastic-damage model for concrete. Int J Solids Struct. 1989;25:299–326. https://doi.org/10.1016/0020-7683(89)90050-4.10.1016/0020-7683(89)90050-4 ↗
56. Smith M. ABAQUS/Standard User’s Manual, Version 6.12., Dassault Systèmes Simulia Corp. (2009).
57. Benzeggagh ML, Kenane M. Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus. Compos Sci Technol. 1996;56:439–49. https://doi.org/10.1016/0266-3538(96)00005-X.10.1016/0266-3538(96)00005-X ↗
58. Camanho PP, Davila CG. Mixed-Mode Decohesion Finite Elements for the Simulation of Delamination in Composite Materials. NASA Tech Paper. 2002;211737:42. https://ntrs.nasa.gov/citations/20020053651.
59. Cheng J, Xu Y, Zhang W, Liu W. A review on the multi-scale simulation of Z-pinned composite laminates. Compos Struct. 2022;295:115834. https://doi.org/10.1016/J.COMPSTRUCT.2022.115834.10.1016/J.COMPSTRUCT.2022.115834 ↗
60. Chen H, Na J, Wang D, Kong D, Zhang X. Numerical simulation and failure experiment of hygrothermal aged CFRP single and double lap joints. Thin-Walled Struct. 2023;188:110786. https://doi.org/10.1016/J.TWS.2023.110786.10.1016/J.TWS.2023.110786 ↗
61. Mu W, Qin G, Na J, Tan W, Liu H, Luan J. Effect of alternating load on the residual strength of environmentally aged adhesively bonded CFRP-aluminum alloy joints. Compos B Eng. 2019;168:87–97. https://doi.org/10.1016/J.COMPOSITESB.2018.12.070.10.1016/J.COMPOSITESB.2018.12.070 ↗
62. Li LY, Purkiss J. Stress–strain constitutive equations of concrete material at elevated temperatures. Fire Saf J. 2005;40:669–86. https://doi.org/10.1016/J.FIRESAF.2005.06.003.10.1016/J.FIRESAF.2005.06.003 ↗
63. Hager I. Behaviour of cement concrete at high temperature. Bull Pol Acad Sci Tech Sci. 2013;61:145–54. https://doi.org/10.2478/bpasts-2013-0013.10.2478/bpasts-2013-0013 ↗
64. Chang YF, Chen YH, Sheu MS, Yao GC. Residual stress–strain relationship for concrete after exposure to high temperatures. Cem Concr Res. 2006;36:1999–2005. https://doi.org/10.1016/j.cemconres.2006.05.029.10.1016/j.cemconres.2006.05.029 ↗