Multi-scale imaging of additively manufactured Al–Ta composites
Source abstract
Abstract
Abstract The rapid advancement of metal additive manufacturing (AM) has driven the need for innovative feedstock materials, with nano- to micro-alloyed composite powders playing a pivotal role in the development of new materials. In aluminium alloys, alloying additives are introduced to eliminate hot cracking. Composite feedstock quality is therefore critical, as it influences the effectiveness of additives on the final part properties. The particle morphology, size distribution, and structural integrity of feedstock powders directly affect the density and mechanical performance of additively manufactured components. This study employs X-ray computed tomography (XCT) and scanning electron microscopy (SEM) for a comprehensive, quantitative evaluation of Al–Ta composite powders and their manufactured counterparts in the Laser Powder Bed Fusion (PBF-LB/M) process. The integration of XCT and SEM enables a detailed characterisation of powder features and their potential impact on microstructural integrity. Our findings demonstrate the capability of XCT as a non-destructive, high-resolution technique that complements SEM for precise volumetric analysis of powder morphology, structural homogeneity, and defect identification.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Aluminum Alloy Microstructure Properties · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Cooke S, Ahmadi K, Willerth S, Herring R. Metal additive manufacturing: technology, metallurgy and modelling. J Manuf Process. 2020;57:978–1003. https://doi.org/10.1016/J.JMAPRO.2020.07.025.10.1016/J.JMAPRO.2020.07.025 ↗
2. Martucci A, Aversa A, Lombardi M. Ongoing challenges of laser-based powder bed fusion processing of Al alloys and potential solutions from the literature—a. Rev Mater. 2023;16:1084. https://doi.org/10.3390/MA16031084.10.3390/MA16031084 ↗
3. Yadegari MJ, Martucci A, Biamino S, Ugues D, Montanaro L, Fino P, Lombardi M. Aluminum laser additive manufacturing: a review on challenges and opportunities through the lens of sustainability. Appl Sci. 2025 https://doi.org/10.3390/app1504222110.3390/app15042221 ↗
4. Aboulkhair NT, Simonelli M, Parry L, Ashcroft I, Tuck C, Hague R. 3D printing of aluminium alloys: additive manufacturing of aluminium alloys using selective laser melting. Prog Mater Sci. 2019 https://doi.org/10.1016/j.pmatsci.2019.100578.10.1016/j.pmatsci.2019.100578 ↗
5. Empirical J, Bai S, Liu J. Empirical investigation of properties for additive manufactured aluminum metal matrix composites. Appl Mech. 2024;5:450–74 https://doi.org/10.3390/applmech503002610.3390/applmech5030026 ↗
6. Dong Y, Chen A, Yang T, Gao S, Liu S, Guo B, Jiang H, Shi Y, Yan C. Microstructure evolution and mechanical properties of Al2O3 foams via laser powder bed fusion from Al particles. Adv Powder Mater. 2023;2:100135. https://doi.org/10.1016/j.apmate.2023.100135.10.1016/J.APMATE.2023.100135 ↗
7. Esguerra-Arce J, Esguerra-Arce A, Tirado-González JG, Ospina-Mendoza N, Lacan F, Setchi R. Feasibility of using ground Al-Al2O3 composite powders in laser powder bed fusion. Powder Technol. 2024;445:120144. https://doi.org/10.1016/j.powtec.2024.120144.10.1016/J.POWTEC.2024.120144 ↗
8. Lin TC, Cao C, Sokoluk M, Jiang L, Wang X, Schoenung JM, Lavernia EJ, Li X. Aluminum with dispersed nanoparticles by laser additive manufacturing. Nat Commun 2019. 2019;10(10):1. https://doi.org/10.1038/s41467-019-12047-2.10.1038/s41467-019-12047-2 ↗
9. Li XP, Ji G, Chen Z, Addad A, Wu Y, Wang HW, Vleugels J, Van Humbeeck J, Kruth JP. Selective laser melting of nano-TiB2 decorated AlSi10Mg alloy with high fracture strength and ductility. Acta Mater. 2017;129:183–93. https://doi.org/10.1016/J.ACTAMAT.2017.02.062.10.1016/J.ACTAMAT.2017.02.062 ↗
10. Wang Y, Shi J, Lu S, Xiao W. Investigation of porosity and mechanical properties of graphene nanoplatelets-reinforced AlSi10 Mg by selective laser melting. J Micro Nanomanuf. 2018;6. https://doi.org/10.1115/1.4038454/368835.10.1115/1.4038454/368835 ↗
11. Sun X, Chen M, Liu T, Zhang K, Wei H, Zhu Z, Liao W. Characterization, preparation, and reuse of metallic powders for laser powder bed fusion: a review. Int J Extreme Manuf. 2023;6:012003. https://doi.org/10.1088/2631-7990/ACFBC3.10.1088/2631-7990/ACFBC3 ↗
12. Gruber K, Ahmad L, Farag M, Smolina I. Diffuse reflectance spectroscopy for the qualification of powder blends for additive manufacturing. Powder Technol. 2025;453:120652. https://doi.org/10.1016/J.POWTEC.2025.120652.10.1016/J.POWTEC.2025.120652 ↗
13. Chawla K K. Metal matrix composites. Compos Mater. 1998;164–211. https://doi.org/10.1007/978-1-4757-2966-5_6.10.1007/978-1-4757-2966-5_6 ↗
14. Yu WH, Sing SL, Chua CK, Kuo CN, Tian XL. Particle-reinforced metal matrix nanocomposites fabricated by selective laser melting: a state of the art review. Prog Mater Sci. 2019;104:330–79. https://doi.org/10.1016/J.PMATSCI.2019.04.006.10.1016/J.PMATSCI.2019.04.006 ↗
15. Hamilton JD, Ramesh S, Harrysson OLA, Rock CD, Rivero IV. Cryogenic mechanical alloying of aluminum matrix composites for powder bed fusion additive manufacturing. J Compos Mater. 2021;55:641–51. https://doi.org/10.1177/0021998320957698.10.1177/0021998320957698 ↗
16. Fogagnolo JB, Robert MH, Velasco F, Torralba JM. aluminium matrix composites reinforced with si3n4, aln and zrb2, produced by conventional powder metallurgy and mechanical alloying. Kona Powder Part J. 2004;22:143–50. https://doi.org/10.14356/KONA.2004017.10.14356/KONA.2004017 ↗
17. Gu D, Wang H, Dai D, Chang F, Meiners W, Hagedorn Y-C, Wissenbach K, Kelbassa I, Poprawe R. Densification behavior, microstructure evolution, and wear property of TiC nanoparticle reinforced AlSi10Mg bulk-form nanocomposites prepared by selective laser melting. J Laser Appl. 2015;27:17003. https://doi.org/10.2351/1.4870877/221698.10.2351/1.4870877/221698 ↗
18. Wang R, Xi L, Ding K, Gökce B, Barcikowski S, Gu D. Powder preparation during ball milling and laser additive manufacturing of aluminum matrix nanocomposites: powder properties, processability and mechanical property. Adv Powder Technol. 2022;33:103687. https://doi.org/10.1016/J.APT.2022.103687.10.1016/J.APT.2022.103687 ↗
19. Wang H, Gu D. Nanometric TiC reinforced AlSi10Mg nanocomposites: powder preparation by high-energy ball milling and consolidation by selective laser melting. J Compos Mater. 2015;49:1639–51. https://doi.org/10.1177/0021998314538870.10.1177/0021998314538870 ↗
20. Cabeza M, Feijoo I, Merino P, Pena G, Pérez MC, Cruz S, Rey P. Effect of high energy ball milling on the morphology, microstructure and properties of nano-sized TiC particle-reinforced 6005A aluminium alloy matrix composite. Powder Technol. 2017;321:31–43. https://doi.org/10.1016/J.POWTEC.2017.07.089.10.1016/J.POWTEC.2017.07.089 ↗
21. Zhai W, Zhou W, Nai SML, Wei J. Characterization of nanoparticle mixed 316 L powder for additive manufacturing. J Mater Sci Technol. 2020;47:162–8. https://doi.org/10.1016/J.JMST.2020.02.019.10.1016/J.JMST.2020.02.019 ↗
22. Kennedy SK, Dalley AM, Kotyk GJ. Additive manufacturing: assessing metal powder quality through characterizing feedstock and contaminants. J Mater Eng Perform. 2019;28:728–40. https://doi.org/10.1007/S11665-018-3841-5/FIGURES/14.10.1007/S11665-018-3841-5/FIGURES/14 ↗
23. Grubbs J, Tsaknopoulos K, Massar C, Young B, O’Connell A, Walde C, Birt A, Siopis M, Cote D. Comparison of laser diffraction and image analysis techniques for particle size-shape characterization in additive manufacturing applications. Powder Technol. 2021;391:20–33. https://doi.org/10.1016/J.POWTEC.2021.06.003.10.1016/J.POWTEC.2021.06.003 ↗
24. Slotwinski JA, Garboczi EJ, Stutzman PE, Ferraris CF, Watson SS, Peltz MA. Charact metal powders used Additive Manuf. 2014;119. https://doi.org/10.6028/jres.119.018.10.6028/jres.119.018 ↗
25. Bakas G, Dimitriadis S, Deligiannis S, Gargalis L, Skaltsas I, Bei K, Karaxi E, Koumoulos EP. A tool for rapid analysis using image processing and artificial intelligence: automated interoperable characterization data of metal powder for additive manufacturing with SEM case. Metals. 2022;12:1816 https://doi.org/10.3390/MET1211181610.3390/MET12111816 ↗
26. Kang C, Xiong X, Wang X, Feng Z, Fan W, Wang Y, Dang M, Tan H, Zhang F, Lin X. Influence of SiC particles on the microstructure and mechanical behaviors of AlMgScZr alloy processed by laser powder bed fusion. Mater Sci Eng. 2024;910:146911. https://doi.org/10.1016/J.MSEA.2024.146911.10.1016/J.MSEA.2024.146911 ↗
27. Zhou X, Dai N, Cheng X, Thompson A, Leach R. Three-dimensional characterization of powder particles using X-ray computed tomography. Addit Manuf. 2021;40:101913. https://doi.org/10.1016/J.ADDMA.2021.101913.10.1016/J.ADDMA.2021.101913 ↗
28. Wadsworth J. Additive manufacturing of metal matrix composites. Mater Des. 2025;252:113609. https://doi.org/10.1016/j.matchar.2014.10.019.10.1016/j.matchar.2014.10.019 ↗
29. Lu Z, Han Y, Gao Y, Cao F, Zhang H, Miao K, Deng X, Li D. Effect of Nano-Si3N4 Reinforcement on the microstructure and mechanical properties of laser-powder-bed-fusioned AlSi10Mg composites. Crystals. 2022 https://doi.org/10.3390/cryst1203036610.3390/cryst12030366 ↗
30. Yi D, Wang X, Li T, Jiang P, Zhang D, Poprawe R. Microstructure and mechanical properties of laser powder bed fusion (LPBF) fabricated AlSi10Mg-10SiC enhanced with nano-TiO2 particles. J Alloys Compd. 2026;1056:186635. https://doi.org/10.1016/j.jallcom.2026.186635.10.1016/j.jallcom.2026.186635 ↗
31. Carmignato S, Dewulf W, Leach R. Industrial X-Ray Computed Tomography. Cham, Switzerland: Springer. 2018. https://doi.org/10.1007/978-3-319-59573-310.1007/978-3-319-59573-3 ↗
32. Ziółkowski G, Gruber K, Tokarczyk E, Roszak R, Ziegenhorn M. X-ray computed tomography for the ex-situ mechanical testing and simulation of additively manufactured IN718 samples. Addit Manuf. 2021;45:102070. https://doi.org/10.1016/J.ADDMA.2021.102070.10.1016/J.ADDMA.2021.102070 ↗
33. Gladstein A, Aramanda SK, Shi L, Landini J, Goettsch J, Reese C, Sahu B, Xiao X, Hunter A, Thornton K, Shahani AJ, Taub AI. Direct evidence of the formation mechanisms of TiC nanoparticles and Al3Ti intermetallics during synthesis of an Al/TiC metal matrix nanocomposite. Acta Mater. 2024;277:120189. https://doi.org/10.1016/J.ACTAMAT.2024.120189.10.1016/J.ACTAMAT.2024.120189 ↗
34. Lang T, Heim A, Heinzl C. Machine learning-supported visual analytics for high resolution X-ray inspection of metal matrix composites. Tomography Mater Struct. 2025;7:100047. https://doi.org/10.1016/J.TMATER.2024.100047.10.1016/J.TMATER.2024.100047 ↗
35. Lee T, Jeong W, Chung SH, So KP, Ryu HJ. Novel solid-state metal powder surface modification process for additive manufacturing of metal matrix composites and alloys. Appl Surf Sci. 2023;615:156364. https://doi.org/10.1016/j.apsusc.2023.156364.10.1016/j.apsusc.2023.156364 ↗
36. du Plessis A, Sperling P, Beerlink A, du Preez WB, le Roux SG. Standard method for microCT-based additive manufacturing quality control 4: Metal powder analysis. MethodsX. 2018;5:1336–45. https://doi.org/10.1016/J.MEX.2018.10.021.10.1016/J.MEX.2018.10.021 ↗
37. Behnsen JG, Roberts JW, Rogan OJ, McArdle JM, Black K. Micro-X-ray-CT for analysis of particle size segregation during powder spreading in Binder Jet Printing. Additive Manuf Lett. 2025;12:100266. https://doi.org/10.1016/j.addlet.2024.100266.10.1016/j.addlet.2024.100266 ↗
38. Kitamura K, Tanaka M, Mori T. Unveiling particle mixing from non-destructive 3D XCT imaging with machine learning aided spatial distribution analysis. Powder Technol. 2026;469:121699. https://doi.org/10.1016/j.jcis.2022.06.006.10.1016/j.jcis.2022.06.006 ↗
39. Williams JJ, Flom Z, Amell AA, Chawla N, Xiao X, De Carlo F. Damage evolution in SiC particle reinforced Al alloy matrix composites by X-ray synchrotron tomography. Acta Mater. 2010;58:6194–205. https://doi.org/10.1016/J.ACTAMAT.2010.07.039.10.1016/J.ACTAMAT.2010.07.039 ↗
40. Mihalcea E, Vergara-Hernández HJ, Olmos L, Jimenez O, Arteaga D, Salgado-López JM. X-ray computed microtomography characterization of Ti6Al4V/CoCrMo biomedical composite fabricated by semi-solid sintering. J Nondestr Eval. 2021;40:1–13. https://doi.org/10.1007/S10921-020-00742-W.10.1007/S10921-020-00742-W ↗
41. Gruber P, Ziółkowski G, Olejarczyk M, Grochowska E, Hoppe V, Szymczyk-Ziółkowska P, Kurzynowski T. Influence of bioactive metal fillers on microstructural homogeneity of PA12 composites produced by polymer Laser Sintering. Arch Civil Mech Eng. 2022 https://doi.org/10.1007/S43452-022-00442-4.10.1007/S43452-022-00442-4 ↗
42. Lifton J, Liu T. An adaptive thresholding algorithm for porosity measurement of additively manufactured metal test samples via X-ray computed tomography. Addit Manuf. 2021 https://doi.org/10.1016/J.ADDMA.2021.101899.10.1016/J.ADDMA.2021.101899 ↗
43. Glinz J, Zabler S, Kastner J, Senck S. Metal artifacts in attenuation and phase contrast X-ray microcomputed tomography: a comparative study. Exp Mech. 2022;62:837–47. https://doi.org/10.1007/S11340-022-00835-9.10.1007/S11340-022-00835-9 ↗
44. Villarraga-Gómez H, Brackman P, Ziabari A, Rahman O, Snow Z, Shahani R, Bugelnig K, Andreyev A, Trenikhina Y, Johnson N, Bale H, Schulz J, Santos EC. Multiscale characterization of additive manufacturing components with computed tomography, 3D X-ray microscopy, and deep learning. J Nondestruct Eval 2025;44:344. https://doi.org/10.1007/s10921-025-01231-8.10.1007/s10921-025-01231-8 ↗
45. del Rio DC, Jensen DJ, Tiedje NS, Fæster S, Yu T. Factors affecting particle characterization of powders used in additive manufacturing. Powder Technol. 2024;434:119324. https://doi.org/10.1016/j.powtec.2023.119324.10.1016/j.powtec.2023.119324 ↗
46. Behnsen JG, Black K, Houghton JE, Worden RH. A review of particle size analysis with X-ray CT. Materials. 2023;16:1259. https://doi.org/10.3390/ma16031259.10.3390/ma16031259 ↗
47. Stopyra W, Smolina I, Grochowska E, Kobiela K, Karoluk M, Kasprowicz M, Gruber K. Nanoalloyed Al5254 alloy manufactured by powder bed fusion–laser beam: microstructure and mechanical properties analysis. Progress Additive Manuf. 2025;10:1701–6. https://doi.org/10.1007/S40964-024-00940-2.10.1007/S40964-024-00940-2 ↗
48. Kobiela K, Smolina I, Gruber K, Stopyra W, Karoluk M, Szczurek J. Corrosion behaviour of Al5254 alloy with tantalum addition processed by powder bed fusion–laser beam. Archives Civil Mech Eng. 2026;26:326. https://doi.org/10.1007/s43452-026-01491-9.10.1007/s43452-026-01491-9 ↗
49. Villarraga-Gómez H, Lee CB, Smith ST. Dimensional metrology with X-ray CT: a comparison with CMM measurements on internal features and compliant structures. Precis Eng. 2018;51:291–307. https://doi.org/10.1016/j.precisioneng.2017.08.021.10.1016/j.precisioneng.2017.08.021 ↗
50. VDI/VDE 2630. Blatt 1.4:2010-06 Computed tomography in dimensional metrology—measurement procedure and comparability, n.d.
51. Michi RA, Plotkowski A, Shyam A, Dehoff RR, Babu SS. Towards high-temperature applications of aluminium alloys enabled by additive manufacturing. Int Mater Rev. 2022;67:298–345. https://doi.org/10.1080/09506608.2021.1951580.10.1080/09506608.2021.1951580 ↗
52. Sinico M, Jadhav SD, Witvrouw A, Vanmeensel K, Dewulf W, Micro-computed a. tomography comparison of the porosity in additively fabricated CuCr1 alloy parts using virgin and surface-modified powders. Materials. 2021 https://doi.org/10.3390/MA1408199510.3390/MA14081995 ↗
53. Parsons EM, Shaik SZ. Additive manufacturing of aluminum metal matrix composites: mechanical alloying of composite powders and single track consolidation with laser powder bed fusion. Addit Manuf. 2022;50:102450. https://doi.org/10.1016/J.ADDMA.2021.102450.10.1016/J.ADDMA.2021.102450 ↗
54. Opprecht M, Garandet JP, Roux G, Flament C, Soulier M. A solution to the hot cracking problem for aluminium alloys manufactured by laser beam melting. Acta Mater. 2020;197:40–53. https://doi.org/10.1016/J.ACTAMAT.2020.07.015.10.1016/J.ACTAMAT.2020.07.015 ↗
55. Martin JH, Yahata BD, Hundley JM, Mayer JA, Schaedler TA, Pollock TM. 3D printing of high-strength aluminium alloys. Nature. 2017;549(549):7672. https://doi.org/10.1038/nature23894.10.1038/nature23894 ↗
56. Freundl R, Jägle EA. Processing TiC nanoparticle reinforced aluminum matrix composites in PBF-LB: Powder blending approach, particle sintering, precipitation and grain refinement. Mater Des. 2024;248:113490. https://doi.org/10.1016/J.MATDES.2024.113490.10.1016/J.MATDES.2024.113490 ↗
57. Sufiiarov V, Borisov A, Popovich A, Erutin D. Effect of TiC Particle size on processing, microstructure and mechanical properties of an inconel 718/TiC composite material made by binder jetting additive manufacturing. Metals. 2023;13:1271 https://doi.org/10.3390/MET1307127110.3390/MET13071271 ↗
58. Chatziathanasiou T, Demir O, Soete J, Breite C, Mehdikhani M, Diehl M, Swolfs Y. Material representativeness of a polymer matrix doped with nanoparticles as the random speckle pattern for digital volume correlation of fibre-reinforced composites. Compos B Eng. 2024;276:111381. https://doi.org/10.1016/J.COMPOSITESB.2024.111381.10.1016/J.COMPOSITESB.2024.111381 ↗
59. Withers PJ, Bouman C, Carmignato S, Cnudde V, Grimaldi D, Hagen CK, Maire E, Manley M, Du Plessis A, Stock SR. X-ray computed tomography. Nat Rev Methods Primers. 2021;1(1):1. https://doi.org/10.1038/s43586-021-00015-4.10.1038/s43586-021-00015-4 ↗