journal article·2026-05-06

Failure characteristics and energy absorption enhancement mechanism of honeycomb structure scaffolds reinforced cementitious composites based on acoustic emission and digital image correlation

Gaofang Zhu, Hongwen Jing, Zhenhua Li, Qian Yin, Shujian Chen, Jiangyu Wu

Publisher page

Abstract

With the increasing complexity of engineering environments, there is a growing demand for concrete materials that not only possess high strength but also exhibit good ductility, energy absorption capacity, and durability. In response to these requirements, this study proposes a novel cementitious composite material reinforced with a 3D-printed multilayer honeycomb-structured scaffold, referred to as HSRCC (Honeycomb Structure Scaffold Reinforced Cementitious Composite). A series of lateral compression tests were conducted, supplemented by digital image correlation (DIC), acoustic emission (AE), and scanning electron microscopy (SEM) techniques, to investigate the influence of scaffold volume on the macro- and micro-mechanical behavior of the specimens, including load-displacement responses, initial crushing force, energy absorption, deformation characteristics, and damage mechanisms. The results indicate that increasing the scaffold volume leads to higher initial peak crushing force and energy absorption. The addition of honeycomb structure scaffolds enhanced the initial peak crushing force of the cementitious matrix by 7% to 80%, whilst increasing its energy absorption capacity by 208% to 365%. Moreover, the specimens exhibit enhanced ductility and more pronounced strain-hardening behavior with increasing scaffold volume. DIC analysis reveals a decreasing trend in lateral expansion rate as the scaffold volume increases. AE-based failure mode classification indicates a growing proportion of shear cracks with increasing scaffold volume. Finally, SEM analysis verified the load-bearing and crack-controlling mechanisms of the honeycomb-structured scaffold. The proposed HSRCC material exhibits a favorable combination of high strength, ductility, and energy absorption, rendering it highly suitable for high-performance engineering applications, such as bridge joints, seismic-resistant structures, and deep tunnel support systems.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Microbial Applications in Construction Materials · Rock Mechanics and Modeling

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Wu JY, Yang S, Williamson M, Wong HS, et al. Microscopic mechanism of cellulose nanofibers modified cemented gangue backfill materials. Adv Compos Hybrid Mater. 2025;8:177. https://doi.org/10.1007/s42114-025-01270-910.1007/s41062-025-01978-z ↗
2. Shanmugasundaram N, Praveenkumar S, Kumar PSA. Structural behavior of engineered cementitious composite substrate slab overlays for bridge deck and pavement applications. Constr Build Mater. 2025;459:142521. https://doi.org/10.1016/j.conbuildmat.2024.13973610.1016/j.conbuildmat.2024.139736 ↗
3. Xu X, Wu LL, Wang H, et al. Experimental and numerical study of drop hammer test on honeycomb sandwich panel resistant to rock burst in coal mine roadway. Structures. 2024;65:106615. https://doi.org/10.1016/j.istruc.2024.10680110.1016/j.istruc.2024.106801 ↗
4. Wu JY, Zhang WY, Wang YM, et al. Effect of composite alkali activator proportion on macroscopic and microscopic properties of gangue cemented rockfill: experiments and molecular dynamic modelling. Int J Miner Metall Mater. 2025;32:1813–1825. DOI: 10.1007/s12613-025-3140-810.1016/j.istruc.2023.105814 ↗
5. Muñoz Pérez SP, Santisteban Purizaca JF, Castillo Matute SM, et al. Glass fiber reinforced concrete: overview of mechanical and microstructural analysis. Innov Infrastruct Solut. 2024;9:116. https://doi.org/10.1007/s41062-024-01429-110.1007/s41062-024-01429-1 ↗
6. Mu R, Cheng QA, Zhao QM, et al. Dynamic compressive properties of 2D-aligned steel fiber reinforced cement-based composites. Constr Build Mater. 2024;425:136807. https://doi.org/10.1016/j.conbuildmat.2024.13589310.1016/j.conbuildmat.2024.135893 ↗
7. Garcia Chumacero JM, Acevedo Torres PL, Criss Corcuera La Portilla C, et al. Effect of the reuse of plastic and metallic fibers on the characteristics of a gravelly soil with clays stabilized with natural hydraulic lime. Innov Infrastruct Solut. 2023;8:185. https://doi.org/10.1007/s41062-023-01155-010.1007/s41062-023-01155-0 ↗
8. Pérez SPM, Zapata LIV, Muñoz FLT, et al. Influence of coconut fiber on mortar properties in masonry walls. Electron J Struct Eng. 2023;23:52–58. DOI:10.56748/ejse.2339110.56748/ejse.23391 ↗
9. Pérez SPM, Viera JPF, Carranza JFG, et al. Effect of crumb rubber and steel slag on asphalt mixtures for a micropavement. Innov Infrastruct Solut. 2024;9:37. https://doi.org/10.1007/s41062-023-01342-z10.1007/s41062-023-01342-z ↗
10. Cabanillas Hernandez G, Garcia Chumacero JM, Villegas Granados LM, et al. Sustainable use of wood sawdust as a replacement for fine aggregate to improve the properties of concrete: a Peruvian case study. Innov Infrastruct Solut. 2024;9:233. https://doi.org/10.1007/s41062-024-01567-610.1007/s41062-024-01567-6 ↗
11. Muñoz Perez SP, Garcia Chumacero JM, Charca Mamani S, et al. Influence of the secondary aluminum chip on the physical and mechanical properties of concrete. Innov Infrastruct Solut. 2023;8:45. https://doi.org/10.1007/s41062-022-01015-310.1007/s41062-022-01015-3 ↗
12. Pacheco DSC, Barboza EMC, Pérez SPM, et al. Influence of rice husk and cabuya fiber on the physical and mechanical properties of adobe. Eng Appl Sci Res. 2025;52:112–124. DOI: 10.14456/easr.2025.10
13. Bosbach S, Hegger J, Classen M. Dowel action of textile CFRP shear reinforcement in carbon reinforced concrete. Constr Build Mater. 2024;411:134315. https://doi.org/10.1016/j.conbuild mat.2023.13410610.1016/j.conbuildmat.2023.134106 ↗
14. Burgos Cotrina JA, Cubas Benavides EA, Garcia Chumacero JM. Analysis of the combination of glass and polypropylene fibers on the mechanical properties of mortar. J Build Pathol Rehabil. 2025;10:1–13. https://doi.org/10.1007/s41024-024-00532-110.1007/s41024-024-00532-1 ↗
15. Arcila Londoño SL, Garcia Chumacero JM, Villegas Granados LM, et al. Valorization of treated bamboo fiber in the mechanical strength and durability of concrete. Innov Infrastruct Solut. 2025;10:1–18. https://doi.org/10.1007/s41062-025-02022-w10.1007/s41062-025-02022-w ↗
16. Mu R, Wang ZD, Wang XW, et al. Experimental study on shear properties of aligned steel fiber reinforced cement-based composites. Constr Build Mater. 2018;184:27–33. https://doi.org/10.1016/j.conbuildmat.2018.06.02610.1016/j.conbuildmat.2018.06.026 ↗
17. Filazi A, Akat R, Pul M, et al. Physical structural mechanical and thermal insulation properties of hemp fiber-substituted geopolymer composites. Materials. 2025;18:2738. https://doi.org/10.3390/ma1811253610.3390/ma18112536 ↗
18. Filazi A, Tortuk S, Pul M. Determination of optimum blast furnace slag ash and hemp fiber ratio in cement mortars. Structures. 2023;57:104954. https://doi.org/10.1016/j.istruc.20 23.10502410.1016/j.istruc.2023.105024 ↗
19. Jing Y, Zhang CW, Lin GY, et al. Studies on the mechanical properties of rubber concrete reinforced with high-temperature stirred pretreated waste rubber particles. Constr Build Mater. 2024;440:136997. https://doi.org/10.1016/j.conbuildmat.2024.13751610.1016/j.conbuildmat.2024.137516 ↗
20. Wu JY, Wong HS, Zhang H, et al. Improvement of cemented rockfill by premixing low-alkalinity activator and fly ash for recycling gangue and partially replacing cement. Cem Concr Compos. 2024;145:105345. DOI: 10.1016/j.cemconcomp.2023.10534510.1007/s41062-025-02061-3 ↗
21. Chen X, Liu Y, Mu R, et al. Improving reinforcement efficiency of aligned steel fibre on cement-based composites by hybridizing polypropylene fibre. J Build Eng. 2024;82:109783. https://doi.org/10.1016/j.jobe.2024.10978310.1016/j.jobe.2024.109783 ↗
22. Qureshi M, Li J, Wu CQ, et al. Mechanical strength of rubberized concrete: effects of rubber particle size, content, and waste fibre reinforcement. Constr Build Mater. 2024;444:137662. https://doi.org/10.1016/j.conbuildmat.2024.13786810.1016/j.conbuildmat.2024.137868 ↗
23. Peng M, Gao Y, Wei J, et al. Experimental study on mechanical properties and toughness of recycled steel fiber rubber concrete. Case Stud Constr Mater. 2024;20:e03858. https://doi.org/10.1016/j.cscm.2024.e0385810.1016/j.cscm.2024.e03858 ↗
24. Simon D, Peled A, Goldfeld Y. TRC truss—proof of concept by experimental investigation. Compos Struct. 2024;345:118024. https://doi.org/10.1016/j.compstruct.2024.11836110.1016/j.compstruct.2024.118361 ↗
25. Li JJ, Cao S, Song WD. Flexural behavior of cementitious backfill composites reinforced by various 3D printed polymeric lattices. Compos Struct. 2023;323:117435. https://doi.or g/10.1016/j.compstruct.2023.11748910.1016/j.compstruct.2023.117489 ↗
26. Song J, Cao MQ, Cai LM, et al. 3D printed polymeric formwork for lattice cementitious composites. J Build Eng. 2021;43:102565. https://doi.org/10.1016/j.jobe.2021.10307410.1016/j.jobe.2021.103074 ↗
27. Junaid MT, Shweiki A, Barakat S, et al. Flexural characterization and ductility assessment of small-scale mortar beams reinforced with 3D-printed polymers. Structures. 2022;45:1751–1761. https://doi.org/10.1016/j.istruc.2022.10.00710.1016/j.istruc.2022.10.007 ↗
28. Tao YB, Li P, Zhang HW, et al. Compression and flexural properties of rigid polyurethane foam composites reinforced with 3D-printed polylactic acid lattice structures. Compos Struct. 2022;279:114781. https://doi.org/10.1016/j.compstruct.2021.11486610.1016/j.compstruct.2021.114866 ↗
29. Alkhatib F, Mahdi E, Dean A. Development of composite double-hat energy absorber device subjected to traverser loads. Compos Struct. 2020;240:112066. https://doi.org/10.1016/j.co mpstruct.2020.11204610.1016/j.compstruct.2020.112046 ↗
30. Qin SW, Cao S, Yilmaz E. Employing U-shaped 3D printed polymer to improve flexural properties of cementitious tailings backfills. Constr Build Mater. 2022;320:126278. https://doi.org/10.1016/j.conbuildmat.2021.12629610.1016/j.conbuildmat.2021.126296 ↗
31. Hao WF, Liu JW, Kanwal H. Compressive properties of cementitious composites reinforced by 3D printed PA6 lattice. Polym Test. 2023;117:107868. https://doi.org/10.1016/j.polymertesting.2022.10781110.1016/j.polymertesting.2022.107811 ↗
32. Tang C, Liu JW, Qiao J, et al. The preparation and axial compressive properties of 3D-printed polymer lattice-reinforced cementitious composite columns. J Build Eng. 2024;97:110567. https://doi.org/10.1016/j.jobe.2024.11077010.1016/j.jobe.2024.110770 ↗
33. Salazar B, Aghdasi P, Williams ID, et al. Polymer lattice-reinforcement for enhancing ductility of concrete. Mater Des. 2020;196:109119. https://doi.org/10.1016/j.matdes.2020.10918410.1016/j.matdes.2020.109184 ↗
34. Liu JW, Kanwal H, Tang C, et al. Study on flexural properties of 3D printed lattice-reinforced concrete structures using acoustic emission and digital image correlation. Constr Build Mater. 2022;333:127350. https://doi.org/10.1016/j.conbuildmat.2022.12741810.1016/j.compositesb.2023.110665 ↗
35. Dong P, Ding WJ, Yuan HY, et al. 3D-printed polymeric lattice-enhanced sustainable municipal solid waste incineration fly ash alkali-activated cementitious composites. Dev Built Environ. 2022;12:100089. https://doi.org/10.1016/j.dibe.2022.10010110.1016/j.tafmec.2024.104644 ↗
36. Choudhry NK, Nguyen TK, Nguyen-Van V, et al. Auxetic lattice reinforcement for tailored mechanical properties in cementitious composite: experiments and modelling. Constr Build Mater. 2024;438:136739. https://doi.org/10.1016/j.conbuildmat.2024.13725210.1016/j.conbuildmat.2022.127418 ↗
37. Boules PFA, Genikomsou A. Bonded connections of pultruded sections for floor system studied using digital image correlation. Compos Part B Eng. 2023;258:110665. https://doi.org/10.1016/j.compositesb.2023.11066510.1016/j.cscm.2024.e03044 ↗
38. Zheng K, Wang CL, Zhao Y, et al. A dominant frequency-based hierarchical clustering method for evaluating the mode-II fracture mechanisms of shale using the acoustic emission technique. Theor Appl Fract Mech. 2024;134:104652. https://doi.org/10.1016/j.tafmec.2024.10464410.1016/j.compstruct.2024.118348 ↗
39. Liu XD, Ge JR, Zhang DT, et al. Fatigue damage evolution and residual strength analysis of 3D5D braided composites using X-ray computed tomography, acoustic emission, and digital image correlation. Compos Struct. 2024;344:118034. https://doi.org/10.1016/j.compstruct.2024.11834810.1016/j.jeurceramsoc.2022.05.019 ↗
40. Chang JM, Yao YD, Liu K, et al. Damage assessment of concrete beams repaired with basalt fiber-reinforced polymer sheets through digital image correlation and acoustic emission. Case Stud Constr Mater. 2024;20:e02862. https://doi.org/10.1016/j.cscm.2024.e0304410.1016/j.compscitech.2024.110697 ↗
41. Wang YR, Jia LX, Chen ZH, et al. Combining acoustic emission and digital image correlation analysis for dynamic damage response of woven spacer structure reinforced sandwich composites. Compos Struct. 2023;319:117156. https://doi.org/10.1016/j.compstruct.2023.11716210.1016/j.tws.2024.112817 ↗
42. Teng XF, Lyu S, Hu XA, et al. Effect of off-axis angle on mesoscale deformation and failure behavior of plain-woven C/SiC composites with digital image correlation. J Eur Ceram Soc. 2022;42:4712–4722. https://doi.org/10.1016/j.jeurceramsoc.2022.05.01910.1016/j.compscitech.2023.110047 ↗
43. Sofer M, Cienciala J, Sofer P, et al. Transverse cracking signal characterization in CFRP laminates using modal acoustic emission and digital image correlation techniques. Compos Sci Technol. 2024;255:110779. https://doi.org/10.1016/j.compscitech.2024.11069710.1142/S175882511550060X ↗
44. Qi YC, Chi HJ, Liu X, et al. Bionic beetle nickel-titanium medical skeleton with excellent deformation recovery ability and mechanical properties. Thin Wall Struct. 2025;208:112562. https://doi.org/10.1016/j.tws.2024.11281710.1016/j.tws.2023.110582 ↗
45. Chen JB, Li ER, Liu WY, et al. Sustainable composites with ultrahigh energy absorption from beverage cans and polyurethane foam. Compos Sci Technol. 2023;239:110050. https://doi.org/10.1016/j.compscitech.2023.11004710.1016/j.matdes.2015.10.004 ↗
46. Xiang YWM, Yu T, et al. Key performance indicators of tubes and foam-filled tubes used as energy absorbers. Int J Appl Mech. 2015;7:1550060. https://doi.org/10.1142/S175882511550060X10.1016/j.conbuildmat.2023.132306 ↗
47. Zhang ZJ, Wang J, Wang YJ, et al. Elevated temperature axial crushing performance of multi-walled tube-reinforced aluminum foam. Thin Wall Struct. 2023;185:110557. https://doi.org/10.1016/j.tws.2023.11058210.1016/j.cscm.2023.e02088 ↗
48. Xiang YF, Yu TX, Yang LM. Comparative analysis of energy absorption capacity of polygonal tubes, multi-cell tubes and honeycombs by utilizing key performance indicators. Mater Des. 2016;89:689–696. http://doi.org/10.1016/j.matdes.2015.10.00410.1016/j.matdes.2015.10.004 ↗
49. Morozova N, Shibano K, Shimamoto Y, et al. Frost damage evaluation of concrete irrigation structure by X-ray CT and AE energy release trend at the initial loading stage. Case Stud Constr Mater. 2023;18:e01868. https://doi.org/10.1016/j.cscm.2023.e0208810.1016/j.cscm.2023.e02088 ↗
50. Ashraf S, Rucka M. Microcrack monitoring and fracture evolution of polyolefin and steel fibre concrete beams using integrated acoustic emission and digital image correlation techniques. Constr Build Mater. 2023;395:132287. https://doi.org/10.1016/j.conbuildmat.2023.13230610.1016/j.conbuildmat.2023.132306 ↗