journal article·2026-05-04

Influence of submerged fast multiple rotation rolling on the structure, strength, and tribological performance of Al–Si–Cu coatings on AA1010 aluminum

Seyedeh Marjan Bararpour, Hamed Jamshidi Aval, Roohollah Jamaati, Mamdouh I. Elamy, A. Fathy, M. Elmahdy

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Zhang D, Xu H, Xu S, Chen K, Li Z, Zuo J, Shu X. The formation mechanism and microevolution of front and rear end defects based on die structure optimization for the extrusion of a 6063 aluminum alloy profile with complex cross-section. Archives Civil Mech Eng. 2025;26(1):20.10.1007/s43452-025-01378-1 ↗
2. Ma Z, Shu X, Xu H, Li Z, Xu S, Fan Z. Microstructure evolution of 6063 aluminum alloy thin-walled hollow complex cross-section profile by porthole die extrusion forming. Archives Civil Mech Eng. 2025;26(1):16.10.1007/s43452-025-01383-4 ↗
3. Zhang H, Ni Q, Yu X, Du S, Feng Y, Zhang S. Effect of different butt gaps on laser-CMT hybrid welding of aluminum alloy 6082-T6: forming quality, microstructure and mechanical properties. Archives Civil Mech Eng. 2025;26(1):8.10.1007/s43452-025-01391-4 ↗
4. Qiao Q, Gong X, Guo D, Qian H, Li Z, Zhang D, Kwok C, Tam LM. Influence of tool head geometry on in situ monitoring of temperature, force, and torque during additive friction deposition of aluminum alloy 2219. Mater Sci Additive Manuf. 2025;4(4):025280060.10.36922/MSAM025280060 ↗
5. Peng J, Xie S, Chen T, Wang X, Yu X, Yang L, Ni Z, Ling Z, Yuan Z, Shi J. Numerical simulation and process optimization of laser welding in 6056 aluminum alloy T-joints. Crystals. 2024;15(1):35.10.3390/cryst15010035 ↗
6. Li J, Wang Z, Bai J, Xue H, Tian N, Zhao Z, Qin G. Research progress on microstructure tuning of heat-resistant cast aluminum alloys. J Mater Sci. 2024;59(22):10035–57.10.1007/s10853-024-09538-z ↗
7. Guo Y, Li W-q, Liu X-g, Sugio K, Ke Y-j, Wang K-y, Liu W-c, Sasaki G. Effect of copper coating on interfacial properties, interfacial thermal resistance, microstructure evolution and mechanical properties of aluminum matrix composites. J Alloys Compd. 2022;917:165376.10.1016/j.jallcom.2022.165376 ↗
8. Zhang P, Gao Y, Zhang J, Yue X, Zhou H, Sun Y. The influence mechanism of water jet peening on the fatigue crack growth behavior of 7075 aluminum alloy. Int J Fatigue. 2024;187:108429.10.1016/j.ijfatigue.2024.108429 ↗
9. Li J, Wang S, Zhao Y, Shi X, Qu H, Teng X, Zhang Y, Xu L, Zhang S, Zhu J. Structure and properties of super-hard (MoSiTiVZr) N high-entropy nitride coatings regulated by substrate bias. Surf Coat Technol. 2025;497:131788.10.1016/j.surfcoat.2025.131788 ↗
10. Qiao Q, Wang L, Tam C, Gong X, Dong X, Lin Y, Lam WI, Qian H, Guo D, Zhang D. In-situ monitoring of additive friction stir deposition of AA6061: effect of rotation speed on the microstructure and mechanical properties. Mater Sci Eng A. 2024;902:146620.10.1016/j.msea.2024.146620 ↗
11. Chui P, Sun K, Sun C, Yang X, Shan T. Effect of surface nanocrystallization induced by fast multiple rotation rolling on hardness and corrosion behavior of 316L stainless steel. Appl Surf Sci. 2011;257(15):6787–91.10.1016/j.apsusc.2011.02.127 ↗
12. Zhang X, Wang L, Mao Q, Shi S, Yu Z, Zhao Y. Enhancing wear resistance of chromium coatings through alternating layer structure modulation. Appl Surf Sci. 2025;720:165175.10.1016/j.apsusc.2025.165175 ↗
13. Chillemi M, Raffaele M, Sfravara F. A review of advanced air lubrication strategies for resistance reduction in the naval sector. Appl Sci. 2024;14(13):5888.10.3390/app14135888 ↗
14. Wang Y, Li Y, Sun K. Effect of process duration on the microstructures of fast multiple rotation rolling-induced nanocrystalline layer and its wear properties. J Mater Process Technol. 2018;252:159–66.10.1016/j.jmatprotec.2017.07.033 ↗
15. Venkatesh B, Venkata Suresh B, Patro S. Influence of tool rotation speed on grain refinement, precipitation behavior, and corrosion behavior of friction stir processed AA6063-Cu composites, Proceedings of the Institution of Mechanical Engineers, Part L J Mater Design Appl. 2025; https://doi.org/10.1177/1464420725135976610.1177/14644207251359766 ↗
16. Hu Y, Chen J, Zhen Y, Han Y, Yu C, Xiong K, Zhang S. Study on the wettability, intermetallic compound growth, voids formation and mechanical properties of Cu/Sn joints with changes in substrate roughness for electronic packaging. J Mater Sci: Mater Electron. 2025;36(14):851.
17. Meng X, Wang W, Xie Y, Wang N, Ma X, Dong J, Gao J, Yang T, Huang Y. Microstructural modification and stress corrosion mechanisms of in-situ rolling friction stir welding joints. Mater Charact. 2025;231:115884.10.1016/j.matchar.2025.115884 ↗
18. Wang L, Li S, Zhang Z, Guo Y, Cao J, Xia X. Enhancing the α-phase content and comprehensive performance of plasma sprayed Al2O3-based insulating coatings through Y2O3-Cr2O3-TiO2 multi-component modification. Ceram Int. 2025;52:1530–51.10.1016/j.ceramint.2025.11.308 ↗
19. Dolzhenko A, Tikhonova M, Kaibyshev R, Belyakov A. Microstructures and mechanical properties of steels and alloys subjected to large-strain cold-to-warm deformation. Metals. 2022;12(3):454.10.3390/met12030454 ↗
20. Kisuka FF. Heat generation in granular materials by friction and plastic deformation. University of Surrey; 2023.
21. Wu X, Rastogi A, Gotawala N, Pandol MA, Zhu Y, Yu HZ. Shear-driven solid-state additive manufacturing of aerospace aluminum on impurity contaminated surfaces. Mater Des. 2025;256:114312.10.1016/j.matdes.2025.114312 ↗
22. Vedani M. Plastic deformation of metals, metal science in modern manufacturing technologies, Springer 2025, pp. 35–56.10.1007/978-3-031-97125-9_2 ↗
23. Hu H, Fu T, Li C, Weng S, Zhao Y, Chen X, Peng X. Delay of inverse Hall-Petch relationship of nanocrystalline Cu by modifying grain boundaries with coherent twins. Phys Rev B. 2022;105(2):024107.10.1103/PhysRevB.105.024107 ↗
24. Schütte MR, Ehrich J, Linsler D, Hanke S. Effects of microstructure modification by friction surfacing on wear behavior of Al alloys with different Si contents. Materials. 2022;15(5):1641.10.3390/ma15051641 ↗
25. Elamy MI, Elmahdy M. Enhancing Al-Si-Cu friction-surfaced coatings via fast rotational rolling process. Can Metall Q. 2025. . https://doi.org/10.1080/00084433.2025.260572410.1080/00084433.2025.2605724 ↗
26. Tong S, Gao X, Liu Y, Cheng N, Du X, Yue M. Study on radial force optimization of multistage wobble plate compressor. Int J Refrig. 2025;181:228–41.10.1016/j.ijrefrig.2025.10.018 ↗
27. Chen S, Zhou Y, Zhang N, Chen Q, Peng P, Deng M. Microstructure Regulation and Tribological Response Mechanism of β-Si3N4-Modified 304 Stainless-Steel Coatings. J Mater Eng Perform. 2026;1–14.10.1007/s11665-025-12966-w ↗
28. Zhang Y, Zhang Z, Zhang X, Wu K, Riedel R, Hu D, Xu Y, Wu L, Sun J. Machine learning guided design and ablation behavior of ZrC-TaC-SiC ternary coatings. Corros Sci. 2025;260:113499.10.1016/j.corsci.2025.113499 ↗
29. Zheng K, Min Z, Zhang F, Ren Z, Lin Y. High heat-fade resistance, metal-free resin-based brake pads: a step towards replacing copper by using andalusite. Chin J Mech Eng. 2025;38(1):153.10.1186/s10033-025-01310-x ↗
30. Guo D, Jin R, Shi B, Jia X, Wang S, Xu B. Interaction of nanostructured Lu2Si2O7/Lu2SiO5 double-ceramic layer environmental barrier coatings with CMAS. Surf Coat Technol. 2025;502:131994.10.1016/j.surfcoat.2025.131994 ↗
31. Yuan F, Han Y, Xiao K, Xiang G, Wang Z, Li L, Wang C, Chen X. Spatial modification optimization methods for harmonic drives using a 3D non-uniform line-contact elastohydrodynamic lubrication model. Tribol Int. 2025;214:111288.10.1016/j.triboint.2025.111288 ↗
32. Kumar A, Li D. Can the H/E ratio be generalized as an index for the wear resistance of materials? Mater Chem Phys. 2022;275:125245.10.1016/j.matchemphys.2021.125245 ↗
33. Xu H, Geng D, Jiang X, Xue J, Guo G, Zhang D. An innovative normal self-positioning method with gravity and friction compensation for wall-climbing drilling robot in aircraft assembly. Int J Adv Manuf Technol. 2025;138:1–18.10.1007/s00170-025-15677-7 ↗
34. Guo J, Han Y, Xiao K. Evaluation of linear and nonlinear methods for predicting the dynamic behavior of plain and textured water-lubricated bearings. Phys Fluids. 2025;37(8):083621.10.1063/5.0280770 ↗
35. Zheng K, Le Q, Pan L, Huang J. Friction and wear prediction of copper-free resin-based brake materials: a hybrid PSO-FPA-BP neural network approach. Wear. 2026;206536.10.1016/j.wear.2026.206536 ↗
36. Guo X, Huang J, Dong Z, Kang R, Gao S. Mechanical-chemical synergy in photochemical mechanical polishing monocrystalline yttrium aluminum garnet: an integrated machine learning, response surface, and mathematical methodology. Adv Eng Inform. 2026;70:104198.10.1016/j.aei.2025.104198 ↗
37. Wang S, Zhang Z, Sun C, Gong L, Zhang X, Gao S, Zhang C, Han Q, Yan S Multifunctional tribovoltaic coating for self-powered in situ sensing with exceptional tribological robustness and charge transport. Adv Funct Mater. 2025. . https://doi.org/10.1002/adfm.202514190.10.1002/adfm.202514190 ↗
38. Yuan J, Wang L, Wang C, Dong G, Wang J, Li Y, Hu J, Xu W. Synergizing TWIP and TRIP effects for optimized mechanical performance via stacking fault energy control in austenitic steels. Archives Civil Mech Eng. 2025;25(5):277.10.1007/s43452-025-01333-0 ↗
39. Dhakne A, Jaju S, Shukla S. Review on analysis of enhancing wear properties through thermo-mechanical treatment and grain size. Mater Today: Proc. 2022;60:2270–2.