journal article·2026-04-22Open access

Enhancing microstructural and mechanical properties of 316L stainless steel through Material Extrusion (MEX) optimization

Paweł Płatek, Natalia Daniel, Paweł Baranowski, Kamil Cieplak, Marcin Sarzyński, Julita Dworecka-Wójcik, Wojciech Polkowski

Abstract

Abstract The advent of Material Extrusion (MEX) additive manufacturing for metallic feedstocks presents an opportunity for the cost-effective production of complex austenitic stainless-steel components. However, the widespread adoption of this technology is currently limited by challenges related to porosity, anisotropic shrinkage, and suboptimal interlayer bonding, particularly when utilizing standard parameters derived from polymer processing. This paper presents results of studies focused on the influence of critical printing parameters like specifically nozzle diameter, extrusion temperature, and deposition strategy on the mechanical and microstructural properties of BASF Ultrafuse 316L stainless steel. The study employs a rigorous two-stage experimental design. Stage 1 characterises the limitations of standard processing parameters (0.4 mm nozzle), revealing high porosity and insufficient tensile strength (MPa). Stage 2 implements an optimised strategy utilizing a 0.6 mm nozzle and elevated printing temperatures (250 °C), resulting in an enhancement of mechanical performance, with ultimate tensile strength rising to 483 MPa and elongation at break exceeding 50%. Furthermore, a critical comparative analysis is conducted between specimens printed to net shape and those machined from bulk preforms, elucidating the “shell effect” and its role in mechanical reliability. The findings demonstrate that through precise thermal and shear rate management, MEX 316L can achieve properties competitive with Metal Injection Moulding (MIM), thereby validating the technology for functional structural applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Injection Molding Process and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Ngo TD, Kashani A, Imbalzano G, Nguyen KTQ, Hui D. Additive manufacturing (3D printing): a review of materials, methods, applications and challenges. Compos B Eng. 2018. https://doi.org/10.1016/j.compositesb.2018.02.012.10.1016/j.compositesb.2018.02.012 ↗
2. Haghdadi N, Laleh M, Moyle M, Primig S. Additive manufacturing of steels: a review of achievements and challenges. J Mater Sci. 2021;56(1):64–107. https://doi.org/10.1007/s10853-020-05109-0.10.1007/s10853-020-05109-0 ↗
3. Jiménez A, Bidare P, Hassanin H, Tarlochan F, Dimov S, Essa K. Powder-based laser hybrid additive manufacturing of metals: a review. Int J Adv Manuf Technol. 2021;114(1–2):63–96. https://doi.org/10.1007/s00170-021-06855-4.10.1007/s00170-021-06855-4 ↗
4. García de la Torre H, Pérez MA, Gómez-Gras G. Tailored mechanical performance of fused filament fabricated 316L steel components through printing parameter optimization. Theoret Appl Fract Mech. 2023. https://doi.org/10.1016/j.tafmec.2023.104141.10.1016/j.tafmec.2023.104141 ↗
5. Wang X, Zou B, Ding H, Li L, Liu W. Microstructure and mechanical properties of 316L stainless steel components fabricated via direct energy deposition: an additive manufacturing approach. J Mater Eng Perform. 2025. https://doi.org/10.1007/s11665-025-11717-1.10.1007/s11665-025-11717-1 ↗
6. Vukkum VB, Gupta RK. Review on corrosion performance of laser powder-bed fusion printed 316L stainless steel: effect of processing parameters, manufacturing defects, post-processing, feedstock, and microstructure. Mater Des. 2022;221:110874. https://doi.org/10.1016/j.matdes.2022.110874.10.1016/j.matdes.2022.110874 ↗
7. Berghaus M, et al. Effect of high laser scanning speed on microstructure and mechanical properties of additively manufactured 316L. Prog Addit Manuf. 2025;10(2):1119–32. https://doi.org/10.1007/s40964-024-00693-y.10.1007/s40964-024-00693-y ↗
8. Ahmed N, Barsoum I, Haidemenopoulos G, Al-Rub RKA. Process parameter selection and optimization of laser powder bed fusion for 316L stainless steel: a review. J Manuf Process. 2022. https://doi.org/10.1016/j.jmapro.2021.12.064.10.1016/j.jmapro.2021.12.064 ↗
9. Ahn DG. Directed Energy Deposition (DED) Process: State of the Art. International Journal of Precision Engineering and Manufacturing-Green Technology. 2021. https://doi.org/10.1007/s40684-020-00302-7.10.1007/s40684-020-00302-7 ↗
10. Ahmed N. Direct metal fabrication in rapid prototyping: A review. J Manuf Process. 2019. https://doi.org/10.1016/j.jmapro.2019.05.001.10.1016/j.jmapro.2019.05.001 ↗
11. Nurhudan AI, Supriadi S, Whulanza Y, Saragih AS. Additive manufacturing of metallic based on extrusion process: a review. J Manuf Process. 2021. https://doi.org/10.1016/j.jmapro.2021.04.018.10.1016/j.jmapro.2021.04.018 ↗
12. Hajnys J, et al. A review on support-free printing with powder bed fusion method. Prog Addit Manuf. 2026;11(1):717–33. https://doi.org/10.1007/s40964-025-01373-1.10.1007/s40964-025-01373-1 ↗
13. Megahed M, Mindt HW, N’Dri N, Duan H, Desmaison O. Metal additive-manufacturing process and residual stress modeling. Integrating Materials and Manufacturing Innovation. 2016. https://doi.org/10.1186/s40192-016-0047-2.10.1186/s40192-016-0047-2 ↗
14. Musa NH, et al. Material extrusion (MEX)-based additive manufacturing of metallic materials: review of current trends, challenges, and opportunities. Int J Adv Manuf Technol. 2025. https://doi.org/10.1007/s00170-025-16832-w.10.1007/s00170-025-16832-w ↗
15. Bankapalli NK, Gupta V, Saxena P, Bajpai A, Lahoda C, Polte J. Filament fabrication and subsequent additive manufacturing, debinding, and sintering for extrusion-based metal additive manufacturing and their applications: a review. Compos B Eng. 2023. https://doi.org/10.1016/j.compositesb.2023.110915.10.1016/j.compositesb.2023.110915 ↗
16. Cooke S, Ahmadi K, Willerth S, Herring R. Metal additive manufacturing: Technology, metallurgy and modelling. J Manuf Process. 2020. https://doi.org/10.1016/j.jmapro.2020.07.025.10.1016/j.jmapro.2020.07.025 ↗
17. Ang X, Tey JY, Yeo WH, Shak KPY. A review on metallic and ceramic material extrusion method: Materials, rheology, and printing parameters. J Manuf Process. 2023. https://doi.org/10.1016/j.jmapro.2023.01.077.10.1016/j.jmapro.2023.01.077 ↗
18. Mostafaei A, et al. Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges. Prog Mater Sci. 2021. https://doi.org/10.1016/j.pmatsci.2020.100707.10.1016/j.pmatsci.2020.100707 ↗
19. Suwanpreecha C, Manonukul A. A Review on Material Extrusion Additive Manufacturing of Metal and How It Compares with Metal Injection Moulding. Metals. 2022. https://doi.org/10.3390/met12030429.10.3390/met12030429 ↗
20. Betts JL, Sampson BJ, Lindsey K, Brinkley FM, Priddy MW. Reduction of Process Induced Porosity for Ultrafuse 316L through Parameter Optimization of Creality Ender 3 V2 and Makerbot Method X. Crystals. 2024. https://doi.org/10.3390/cryst14030285.10.3390/cryst14030285 ↗
21. Vidakis N, et al. Critical quality indicators of high-performance polyetherimide (ULTEM) over the MEX 3D printing key generic control parameters: prospects for personalized equipment in the defense industry. Def Technol. 2025;43:150–67. https://doi.org/10.1016/j.dt.2024.08.001.10.1016/j.dt.2024.08.001 ↗
22. Pellegrini A, Palmieri ME, Guerra MG. Evaluation of anisotropic mechanical behaviour of 316L parts realized by metal fused filament fabrication using digital image correlation. Int J Adv Manuf Technol. 2022;120(11–12):7951–65. https://doi.org/10.1007/s00170-022-09303-z.10.1007/s00170-022-09303-z ↗
23. Drazan T, Joska Z, Kluczyński J, Płatek P, Dobrocky D, Krchova M. Analysis of the effect of changing printing parameters on the properties of additively manufactured Ultrafuse 316L steel samples. Arch Civ Mech Eng. 2025. https://doi.org/10.1007/s43452-025-01257-9.10.1007/s43452-025-01257-9 ↗
24. Kluczyński J, et al. A Comparative Investigation of Properties of Metallic Parts Additively Manufactured through MEX and PBF-LB/M Technologies. Materials. 2023. https://doi.org/10.3390/ma16145200.10.3390/ma16145200 ↗
25. Quarto M, Cappellini C, Giardini C, D’Urso G. A novel deposition strategy to reduce porosity and enhance density in material extrusion production. Prog Addit Manuf. 2025;10(2):1133–45. https://doi.org/10.1007/s40964-024-00694-x.10.1007/s40964-024-00694-x ↗
26. Zago M, Lecis N, Mariani M, Cristofolini I. Analysis of the causes determining dimensional and geometrical errors in 316L and 17-4PH stainless steel parts fabricated by metal binder jetting. Int J Adv Manuf Technol. 2024;132(1–2):835–51. https://doi.org/10.1007/s00170-024-13437-7.10.1007/s00170-024-13437-7 ↗
27. Pan Q, et al. Effect of support design on fabrication accuracy of 316L stainless steel components by extruding composite filaments with metal-filled powders. Compos Commun. 2025;55:102316. https://doi.org/10.1016/j.coco.2025.102316.10.1016/j.coco.2025.102316 ↗
28. García de la Torre H, Pérez MA, Gómez-Gras G. Tailored mechanical performance of fused filament fabricated 316L steel components through printing parameter optimization. Theor Appl Fract Mech. 2023;128:104141. https://doi.org/10.1016/j.tafmec.2023.104141.10.1016/j.tafmec.2023.104141 ↗
29. Kedziora S, et al. Strength properties of 316L and 17-4 PH stainless steel produced with additive manufacturing. Materials. 2022. https://doi.org/10.3390/ma15186278.10.3390/ma15186278 ↗
30. Wang S, et al. Role of porosity defects in metal 3D printing: Formation mechanisms, impacts on properties and mitigation strategies. Mater Today. 2022. https://doi.org/10.1016/j.mattod.2022.08.014.10.1016/j.mattod.2022.08.014 ↗
31. Lorenzi S, D’Urso G, Nani L, Quarto M, Fest-Santini S, Pastore T. Effect of the deposition strategy and endogenous defect pattern on the plastic deformability and the fracture mechanism of 316L stainless steel obtained using material extrusion. Eng Fail Anal. 2025. https://doi.org/10.1016/j.engfailanal.2025.109395.10.1016/j.engfailanal.2025.109395 ↗
32. S. Spiller, S. O. Kolstad, and N. Razavi, “Fabrication and characterization of 316L stainless steel components printed with material extrusion additive manufacturing,” in Procedia Structural Integrity, Elsevier B.V., 2022, pp. 1239–1248. https://doi.org/10.1016/j.prostr.2022.12.158.10.1016/j.prostr.2022.12.158 ↗
33. Spiller S, Olsøybakk Kolstad S, Razavi N. Fatigue behavior of 316L stainless steel fabricated via material extrusion additive manufacturing. Eng Fract Mech. 2023. https://doi.org/10.1016/j.engfracmech.2023.109544.10.1016/j.engfracmech.2023.109544 ↗
34. Guo Z, et al. Enhanced compressive properties of additively manufactured Ti-6Al-4V gradient lattice structures. Metals. 2025. https://doi.org/10.3390/met15030230.10.3390/met15030230 ↗
35. Pellegrini A, Guerra MG, Lavecchia F. Impact of post treatment processes on the performance of 316L stainless steel parts manufactured through metal material extrusion additive manufacturing. Int J Adv Manuf Technol. 2025;141(9–10):5359–71. https://doi.org/10.1007/s00170-025-17007-3.10.1007/s00170-025-17007-3 ↗
36. Pellegrini A, Palmieri ME, Guerra MG. Evaluation of anisotropic mechanical behaviour of 316L parts realized by metal fused filament fabrication using digital image correlation. Int J Adv Manuf Technol. 2022;120(11–12):7951–65. https://doi.org/10.1007/s00170-022-09303-z.10.1007/s00170-022-09303-z ↗
37. Tosto C, Tirillò J, Sarasini F, Cicala G. Hybrid metal/polymer filaments for fused filament fabrication (FFF) to print metal parts. Appl Sci (Switzerland). 2021;11(4):1. https://doi.org/10.3390/app11041444.10.3390/app11041444 ↗
38. Ait-Mansour I, Kretzschmar N, Chekurov S, Salmi M, Rech J. Design-dependent shrinkage compensation modeling and mechanical property targeting of metal FFF. Prog Addit Manuf. 2020;5(1):51–7. https://doi.org/10.1007/s40964-020-00124-8.10.1007/s40964-020-00124-8 ↗
39. Kasprowicz M, Pawlak A, Jurkowski P, Kurzynowski T. Ways to increase the productivity of L-PBF processes. Arch Civ Mech Eng. 2023;23(3):1–14. https://doi.org/10.1007/s43452-023-00750-3.10.1007/s43452-023-00750-3 ↗
40. McConnell S, Tanner D, Kourousis KI. Productivity improvement opportunities for metal powder bed fusion technologies: a systematic literature review. Rapid Prototyp J. 2024;30(11):231–46. https://doi.org/10.1108/RPJ-09-2023-0333.10.1108/RPJ-09-2023-0333 ↗
41. Kanyilmaz A, et al. Role of metal 3D printing to increase quality and resource-efficiency in the construction sector. Addit Manuf. 2022;50:102541. https://doi.org/10.1016/J.ADDMA.2021.102541.10.1016/J.ADDMA.2021.102541 ↗
42. Kurzynowski T, Gruber K, Stopyra W, Kuźnicka B, Chlebus E. Correlation between process parameters, microstructure and properties of 316 L stainless steel processed by selective laser melting. Mater Sci Eng A. 2018;718:64–73. https://doi.org/10.1016/J.MSEA.2018.01.103.10.1016/J.MSEA.2018.01.103 ↗
43. Dziewit P, Rajkowski K, Płatek P. Effects of Building Orientation and Raster Angle on the Mechanical Properties of Selected Materials Used in FFF Techniques. Materials. 2024. https://doi.org/10.3390/ma17246076.10.3390/ma17246076 ↗
44. Fischer D, Eßbach C, Schönherr R, Dietrich D, Nickel D. Improving inner structure and properties of additive manufactured amorphous plastic parts: The effects of extrusion nozzle diameter and layer height. Addit Manuf. 2022. https://doi.org/10.1016/j.addma.2022.102596.10.1016/j.addma.2022.102596 ↗
45. García de la Torre H, Gómez-Gras G, Pérez MA. Bimetallic 17-4 PH/316 L stainless steel: Interfacial diffusion and mechanical response in multi-material MEX. Additive Manuf Lett. 2025. https://doi.org/10.1016/j.addlet.2025.100332.10.1016/j.addlet.2025.100332 ↗
46. Frölich F, et al. Evaluation of mechanical properties characterization of additively manufactured components. Prog Addit Manuf. 2025;10(2):1217–29. https://doi.org/10.1007/s40964-024-00700-2.10.1007/s40964-024-00700-2 ↗