journal article·2026-03-24

Temperature-driven thermomechanical degradation and wear mechanisms of surface-engineered Orvar 2 m tool steel under laboratory and forging conditions

Marek Hawryluk, Łukasz Dudkiewicz, Magdalena Jabłońska, Jerzy Smolik

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Metallurgy and Material Forming · Surface Treatment and Residual Stress

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (86)

Show source-provided references
1. Aghajani Derazkola H, Fauconnier D, Kalácska Á, Garcia E, Murillo-Marrodán A, De Baets P. Tribological behaviour of DIN 1.2740 hot working tool steel during mandrel mill stretching process. Tribol Int. 2025;202:110361. https://doi.org/10.1016/j.triboint.2024.110361.10.1016/j.triboint.2024.110361 ↗
2. Zhang Y, Bai T, Zhou F. Grinding damage mechanisms and wear mechanisms of the new cermet micro-milling cutters. Tribol Int. 2024;193:109360. https://doi.org/10.1016/j.triboint.2024.109360.10.1016/j.triboint.2024.109360 ↗
3. Zhang S, Zhao B, Liu Q. Coupling effect of plastic deformation and surface roughness on friction behaviours of rough line contact for ground metal surfaces. Tribol Int. 2024;193:109338. https://doi.org/10.1016/j.triboint.2024.109338.10.1016/j.triboint.2024.109338 ↗
4. Marashi J, Yakushina E. An evaluation of H13 tool steel deformation in hot forging conditions. J Mater Process Technol. 2017;246:276–84.10.1016/j.jmatprotec.2017.03.026 ↗
5. Altan T. Cold and hot forging: Fundamentals and applications. ASM International. 2005.10.31399/asm.tb.chffa.9781627083003 ↗
6. Gronostajski Z, Hawryluk M. The main aspects of precision forging. Arch Civ Mech Eng. 2008;8(2):39–57.10.1016/S1644-9665(12)60192-7 ↗
7. Andreis G, Fuchs K-D, Schruff I. The wear behaviour of hot-work tool steels used in forging processes. In Proceedings of the Fifth International Conference on Tooling (1999). (pp. 593–600).
8. Doege E, Nägele H, Schliephake U. Aspect of wear prediction in precision forging. Proc Inst Mech Eng B J Eng Manuf. 1994;208:111–9.10.1243/PIME_PROC_1994_208_067_02 ↗
9. Medvedeva A, Bergström J, Gunnarsson S, Andersson J. High-temperature properties and microstructural stability of hot-work tool steels. Mater Sci Eng A. 2009;523(1–2):39–46.10.1016/j.msea.2009.06.010 ↗
10. Fajoui J, Kchaou M, Sellami A, et al. Impact of residual stresses on mechanical behaviour of hot work steels. Eng Fail Anal. 2018;94:33–40.10.1016/j.engfailanal.2018.07.020 ↗
11. Hawryluk M, Jakubik J. Analysis of forging defects for selected industrial die forging processes. Eng Fail Anal. 2016;59:396–409.10.1016/j.engfailanal.2015.11.008 ↗
12. Gronostajski Z, Hawryluk M, Jaśkiewicz K, Niechajowicz A, Polak S, Walczak S, et al. Application of physical and mathematical modelling to analysis of different forging processes of constant velocity joint body. Comput Methods Mater Sci. 2007;7(2):231–6.
13. Gronostajski Z, Hawryluk M, Kaszuba M, Zwierzchowski M. Analysis of forging process of constant velocity joint body. Steel Res Int. 2008;Special Edition 1:547–54.
14. Nagao Y, Knoer K, Altan T. Improvement of tool life in cold forging of complex automotive parts. J Mater Process Technol. 1994;46:73–85.10.1016/0924-0136(94)90103-1 ↗
15. Voestalpine Böhler Edelstahl. Hot work tool steel. (2020).
16. Hitachi Metals. YSS hot work tool steels. (2015).
17. Hu XB, Zhang M, Wu XC. Simulations of coarsening behavior for M₂₃C₆ carbides in AISI H13 steel. J Mater Sci Technol. 2006;22(2):153–8.10.1179/026708306X81432 ↗
18. Reggiani B, Donati L, Ben Tahar M, Tomesani L. Experimental investigation of hot-work tool steels performances under the creep-fatigue regime. Int J Adv Manuf Technol. 2018;94:1957–67.10.1007/s00170-017-1023-5 ↗
19. Dworzak Ł, Hawryluk M, Janik M. The impact of the lubricant dose on the reduction of wear dies used in the forging process of the valve forging. Materials. 2021;14(1):212.10.3390/ma14010212 ↗
20. Hawryluk M, et al. Analysis of a forging die wear by 3D reverse scanning combined with SEM and hardness tests. Wear. 2021;476:203576.10.1016/j.wear.2021.203749 ↗
21. Gronostajski Z, Kaszuba M, Hawryluk M, Zwierzchowski M. Review of degradation mechanisms of hot forging tools. Arch Civil Mech Eng. 2014;14(4):528–39.10.1016/j.acme.2014.07.002 ↗
22. Ma D, Zhou J, Chen Z, Zhang Z, Chen Q, Li D. Insight into the microstructural stability and thermal fatigue behavior of nitrided layers on martensitic hot forging tools. Mater Sci-Pol. 2025;43(1):1–17 https://doi.org/10.2478/msp-2025-0005.10.2478/msp-2025-0005 ↗
23. Paschke H, Weber M, Braeuer G, Yilkiran T, Behrens BA, Brand H. Optimized plasma nitriding processes for efficient wear reduction of forging dies. Arch Civil Mech Eng. 2012;12:407–12.10.1016/j.acme.2012.06.001 ↗
24. Uma Devi M, Chakraborty TK, Mohanty ON. Wear behaviour of plasma nitrided tool steels. Surf Coat Technol. 1999;116–119:212–21.10.1016/S0257-8972(99)00118-8 ↗
25. Bombač D, Terčelj M, Peruš I, Fajfar P. Progress of degradation on nitrided dies for aluminium hot extrusion. Wear. 2013;303:10–21.10.1016/j.wear.2013.08.015 ↗
26. Kula P, Wołowiec E, et al. Non-steady state approach to vacuum nitriding for tools. Vacuum. 2013;88:1–7.10.1016/j.vacuum.2012.08.001 ↗
27. Kozłowski M, Lisiecki A. Numerical and experimental analysis of the notch effect on fatigue behavior of PMMA using the strain energy density method and XFEM. Mater Sci-Poland. 2023;41(3):401–13. https://doi.org/10.2478/msp-2023-0027.10.2478/msp-2023-0027 ↗
28. Castro G, Fernández-Vicente A, Cid J. Influence of nitriding time on wear behaviour of AISI H13 steel during crankshaft forging. Wear. 2007;263:1375–85.10.1016/j.wear.2007.02.007 ↗
29. Hubicki R, Richert M, Wiewióra M. Temperature effect on nitride layers on X37CrMoV51 tool steel. Materials. 2019;13(10):2311.10.3390/ma13102311 ↗
30. Paschke H, Weber M, Kaestner P, Braeuer G. Influence of plasma nitriding on wear and crack behaviour of forging tools. Surf Coat Technol. 2010;205:1465–9.10.1016/j.surfcoat.2010.07.053 ↗
31. Hawryluk M, et al. Influence of the nitrided layer thickness of dies made of two types of tool steel used in hot extrusion of valve forgings. Arch Civ Mech Eng. 2021;21:1–17.10.1007/s43452-021-00301-8 ↗
32. Barrau O, Boher C, Gras R, Rezai-Aria F. Analysis of the friction and wear behaviour of hot work tool steel for forging. Wear. 2003;255(7–12):1444–54.10.1016/S0043-1648(03)00280-1 ↗
33. Ahn DG. Hardfacing technologies for improvement of wear characteristics of hot working tools. Int J Precis Eng Manuf. 2013;14(7):1271–83.10.1007/s12541-013-0174-z ↗
34. Vereschaka AA, Grigoriev SN, Vereschaka AS, Popov AY, Batako AD. Nano-scale multilayer composite coatings for cutting tools. Procedia CIRP. 2014;14:1–6.10.1016/j.procir.2014.03.070 ↗
35. Dobrzański LA, Polok M, Adamiak M. Wear resistance improvement by PVD coatings. J Mater Process Technol. 2004;155:1995–2001.10.1016/j.jmatprotec.2004.04.405 ↗
36. Okada M, Hosokawa A, Tanaka R, Ueda T. Cutting performance of PVD-coated tools in hard milling. IJMTM. 2011;51:127–32.
37. Pellizzari M, Molinari A, Straffelini G. Thermal fatigue of plasma duplex-treated tool steel. Surf Coat Technol. 2011;142–144:1109–15.
38. Dobrzański LA, Labisz K, Klimpel A. Effect of laser alloying on thermal fatigue of tool steel. J Ach Mater Manuf Eng. 2006;19(1):83–90.
39. Sjöström J, Bergström J. Thermal fatigue of hot-work tool steel after various austenitizing treatments. J Mater Process Technol. 2004;153–154:1089–96.10.1016/j.jmatprotec.2004.04.158 ↗
40. Łukasik K, Świć J. Zwiększenie trwałości narzędzi metodą regeneracji. In Polska metalurgia 2002;1998–2002.
41. Turek J. Trwałość matryc kuźniczych z wykrojami napawanymi (Praca doktorska). Politechnika Krakowska. 2010.
42. Gruning A, Krauss M, Scholtes B. Isothermal fatigue of tool steel AISI H11. Steel Res Int. 2008;79(2):111–5.10.1002/srin.200806325 ↗
43. Azevedo L, et al. Fatigue behaviour of laser shock peened AISI D2 tool steel. Int J Fatigue. 2022;165:Article 107226.10.1016/j.ijfatigue.2022.107226 ↗
44. Patil S, Bhavar V, Kattire P, Date PP, Singh R. Effect of laser shock peening on AISI L6 hot work tool steel. In Processing, Properties, and Design of Advanced Ceramics and Composites II (n.d.). (Vol. 261).
45. Lu HF, et al. Effects of laser shock peening on microstructural evolution and wear property of laser hybrid remanufactured Ni25/Fe104 coating on H13 tool steel. J Mater Process Technol. 2021;291:117016.
46. Fares ML, Athmani M, Khelfaoui Y, Khettache A. An investigation into the effects of conventional heat treatments on mechanical characteristics of new hot working tool steel. IOP Conference Series Mater Sci Eng. 2012;28:012042.
47. Hunkel M. Segregations in steel during heat treatment. HTM J Heat Treat Mater. 2021;76(2):79–104.10.1515/htm-2020-0006 ↗
48. ASM International. ASM specialty handbook: Tool Mater (1995).
49. Dudkiewicz Ł, Hawryluk M, Polak S, Gronostajski Z. Improving process reliability and dimensional accuracy in precision forgings: a comparative study of cold and hot trimming for the automotive industry. Eksploat Niezawodn. 2026;28(2):1–21.
50. Grange RA. Effect of microstructural banding in steel. Metall Trans. 1971;2:417–26.10.1007/BF02663328 ↗
51. Kusiński J, Kowalski K. Microstructural evolution and mechanical properties of hot-worked tool steels after thermomechanical treatment. Mater Sci-Poland. 2022;40(2):215–24. https://doi.org/10.2478/msp-2022-0018.10.2478/msp-2022-0018 ↗
52. Wei J, Kessler O, Hunkel M, Hoffmann F, Mayr P. Anisotropic phase transformation strain in forged D2 tool steel. Mater Sci Technol. 2004;20(7):909–14.10.1179/026708304225019641 ↗
53. Pawłowski B, Bała P, Dziura R. Effect of microstructural banding in hot-work tool steel on thermal expansion anisotropy. J Achiev Mater Manuf Eng. 2013;56(1):14–9.
54. Ma D, Zhou J, Chen Z, Zhang Z, Chen Q, Li D. Insight into the microstructural stability and thermal fatigue behavior of nitrided layers on martensitic hot forging tools. Mater Sci-Poland. 2025;43(1):1–17 https://doi.org/10.2478/msp-2025-0005.10.2478/msp-2025-0005 ↗
55. Kaynak C, Ankara A, Baker TJ. Inclusion induced anisotropy of short fatigue crack growth in steel. Mater Sci Technol. 1996;12(7):557–62.10.1179/mst.1996.12.7.557 ↗
56. Pessard E, et al. Microstructural heterogeneities and fatigue anisotropy of forged steels. Mater Sci Eng A. 2011;529:289–99.10.1016/j.msea.2011.09.031 ↗
57. Hawryluk M, Dudkiewicz Ł, Jabłońska M, Polak S, Marzec J. Analysis of the destruction of a die insert used in the industrial process of hot die forging to produce a yoke forging. Eng Fail Anal. 2024;164:108661. https://doi.org/10.1016/j.engfailanal.2024.108661.10.1016/j.engfailanal.2024.108661 ↗
58. Armas C, Petersen AF, Schmitt R, Avalos M, Alvarez-Armas I. Mechanical and microstructural behaviour of isothermally and thermally fatigued ferritic/martensitic steels. J Nucl Mater. 2002;307:509–13.10.1016/S0022-3115(02)01086-3 ↗
59. Fares ML, et al. An investigation into the effects of conventional heat treatments on mechanical characteristics of new hot working tool steel. IOP Conference Series Mater Sci Eng. 2012;28:012042.
60. Hawryluk M et al. Preliminary studies of increasing the durability of forging tools subjected to various variants of surface treatment used in the hot die forging process. Eng Failure Anal 2023;143(B):106886.10.1016/j.engfailanal.2022.106886 ↗
61. ASTM International. ASTM G99–17: Standard test method for wear testing with a pin-on-disk apparatus. ASTM International. (2016).
62. Stachowiak GW, Batchelor AW. Engineering tribology (4th ed.). Butterworth-Heinemann. (2013).
63. Bhushan B. Introduction to tribology (2nd ed.). Wiley. (2013).10.1002/9781118403259 ↗
64. Pawlak W, Urbaniak W, Kulczyk M. Influence of ceramic counterpart material on tribological behaviour of thin hard coatings. Tribol Int. 2019;138:111–20. https://doi.org/10.1016/j.triboint.2019.01.045.10.1016/j.triboint.2019.01.045 ↗
65. Dembiczak T, Kruzel R, Náprstková N, Bałaga Z, Kuśmierczak S, Wachowicz J, et al. Abrasion wear analysis of commercial cutting inserts by ball-on-disc method. Manuf Technol. 2024;24(5):738–46. https://doi.org/10.21062/mft.2024.076.10.21062/mft.2024.076 ↗
66. Nassef BG, Pape F, Poll G, Schenzel J, Bergmann B, Denkena B. Evaluating the tribological behaviour in cutting operations using a modified ball-on-disc open tribotester. Lubricants. 2024;12(3):77. https://doi.org/10.3390/lubricants12030077.10.3390/lubricants12030077 ↗
67. Sadeghi A, Zhang T, Komvopoulos K. Wear mechanisms and durability of advanced PVD coatings under severe tribological loading. Surf Coat Technol. 2021;410:126939. https://doi.org/10.1016/j.surfcoat.2021.126939.10.1016/j.surfcoat.2021.126939 ↗
68. Zhang S, Wang L, Kong H. Recent advances in PVD coatings for high-temperature tribological applications. Surf Coat Technol. 2020;385:125430. https://doi.org/10.1016/j.surfcoat.2020.125430.10.1016/j.surfcoat.2020.125430 ↗
69. Gilewicz A, Warcholiński B, Murzynski D. Tribological properties and high-temperature oxidation resistance of CrN- and AlCrN-based coatings deposited by PVD. Mater Sci-Poland. 2019;37(4):603–12. https://doi.org/10.2478/msp-2019-0060.10.2478/msp-2019-0060 ↗
70. Holmberg K. Friction and wear of coatings at elevated temperatures. Tribol Int. 2017;115:567–78. https://doi.org/10.1016/j.triboint.2017.07.009.10.1016/j.triboint.2017.07.009 ↗
71. Warcholiński B, Gilewicz A, Myslinski P. Structure and properties of multilayer AlCrN/CrN coatings for tribological applications. Mater Sci-Poland. 2018;36(3):429–37. https://doi.org/10.2478/msp-2018-0048.10.2478/msp-2018-0048 ↗
72. Ura-Bińczyk E, Kulikowski K, Smolik J, Adamczyk-Cieślak B. Enhancing adhesion of AlFeCr coatings deposited by magnetron sputtering. Arch Civ Mech Eng. 2025;25(3):126. https://doi.org/10.1007/s43452-025-00126.10.1007/s43452-025-00126 ↗
73. Sulima I, Hyjek P. Effect of test conditions on wear properties of steel-matrix composites. Metall Foundry Eng. 2018;43(4):269–79. https://doi.org/10.7494/mafe.2017.43.4.269.10.7494/mafe.2017.43.4.269 ↗
74. Hawryluk M, Lachowicz MM, Zwierzchowski M, Janik M, Gronostajski Z, Filipiak J. Influence of the grade of hot work tool steels and its microstructural features on the durability of punches used in the closed die precision forging of valve forgings made of nickel-chrome steel. Wear, 528–529. Article. 2023;204963:1–20.
75. Vasileiou A, Denkena B, Breidenstein B. Topographical analysis of wear tracks on thin films using 3D areal parameters. Wear. 2020;454–455:203324. https://doi.org/10.1016/j.wear.2020.203324.10.1016/j.wear.2020.203324 ↗
76. Wojtaszek M, Lisiecki Ł, Łukaszek-Sołek A, et al. Application of processing maps and numerical modelling for identification of parameters and limitations of hot forging process of 80MnSi8-6 steel. Arch Civ Mech Eng. 2023;23:240. https://doi.org/10.1007/s43452-023-00783-8.10.1007/s43452-023-00783-8 ↗
77. Dudkiewicz Ł, Polak S, Trusz AM. Development of a new and high-performance precision forging technology. Int J Adv Manuf Technol. 2025;141:3829–45. https://doi.org/10.1007/s00170-025-16842-8.10.1007/s00170-025-16842-8 ↗
78. Terán G, Capula-Colindres S, Angeles-Herrera D, Velázquez JC, Fernández-Cueto MJ. Estimation of fracture toughness K1c from Charpy impact test data in T-welded connections repaired by grinding and wet welding. Eng Fract Mech. 2016;153:351–9. https://doi.org/10.1016/j.engfracmech.2015.12.030.10.1016/j.engfracmech.2015.12.030 ↗
79. Hawryluk M. Tribological performance of Orvar 2m tool steel coated with ALWIN XC for improved forging tool durability. Mater Sci-Poland. 2025;43(4):107–21. https://doi.org/10.2478/msp-2025-0045.10.2478/msp-2025-0045 ↗
80. Internal Report SPR Series No. 90/2023. Determination of the coefficient of thermal expansion (shrinkage) in dilatometric studies of steel samples, grade Orwar 2M [Internal report]. Wrocław University of Science and Technology, Wrocław, Poland.
81. Walkenhorst U. Tool materials used for forging instrumentation [Lecture presentation, multimedia]. Wroclaw University of Science and Technology, Wroclaw, Poland, 21 November 2013, (2013).
82. Widomski P, Kaszuba M, Barełkowski A, Smolik J, Garbiec D. WTaB coatings as effective solutions for increasing die durability in lead-free brass alloy flashless hot forging process. Wear. 2024. https://doi.org/10.1016/j.wear.2024.205849.10.1016/j.wear.2024.205849 ↗
83. Cui X, Wang Z, Shen B, Liu J. Effect of tempering conditions on wear resistance in various wear mechanisms of H13 steel. Tribol Int. 2011;44(7–8):898–905. https://doi.org/10.1016/j.triboint.2011.02.006.10.1016/j.triboint.2011.02.006 ↗
84. Wang Y, Li J, Zhang H, Chen Z. Impact of applied loads on wear mechanisms in H13 steel at various preheating temperatures during laser powder bed fusion additive manufacturing. Wear. 2024;556–557:205538. https://doi.org/10.1016/j.wear.2024.205538.10.1016/j.wear.2024.205538 ↗
85. Hawryluk M, Dudkiewicz Ł, Zwierzchowski M, Polak S, Lachowicz MM, Ziemba J, et al. Influence of the nitriding process on the durability of tools used in the production of automotive forgings in industrial hot die forging processes on hammers. Mater Sci-Poland. 2024;42(4):113–30. https://doi.org/10.2478/msp-2024-0047.10.2478/msp-2024-0047 ↗
86. Dudkiewicz Ł, Hawryluk M, Polak S, Zwierzchowski M. Analysis of the possibilities of increasing the durability of forging tools used in the production of forgings for the automotive industry by applying the ALWIN XC hard coating. Int J Refract Met Hard Mater. 2025;132:Article 107288. https://doi.org/10.1016/j.ijrmhm.2025.107288.10.1016/j.ijrmhm.2025.107288 ↗