journal article·2026-03-23Open access

Effect of MCM-41 on high-temperature transformations in cement paste

Martyna Janek, Maciej Szeląg, Patryk Rumiński, Magdalena Rajczakowska, Rafał Panek, Andrzej Cwirzen

Abstract

The aim of the study was to investigate the effect of mesoporous silica MCM-41 (at 0–2% by cement mass) on the thermal degradation of cement pastes subjected to exposure up to 700 °C. The experimental programme included, among others, thermogravimetry (TG/DTG), isothermal calorimetry, SEM-EDS, ultrasonic pulse velocity (UPV) measurement, and compressive strength testing. The results indicated that MCM-41 accelerates and intensifies the cement hydration process while simultaneously reducing portlandite content after thermal exposure (500 °C: 17.44% → 13.07%). At 300 °C, the content of bound water increased compared to plain cement paste (from 3.77% to 5.03–5.20%), with comparable mass loss at 100 °C (17.33–17.60%). A higher susceptibility to secondary carbonation was also observed in pastes containing MCM-41. Despite the increase in microporosity, matrix continuity was better preserved (UPV: +16.9% at 500 °C and + 25.3% at 700 °C for 0.5% MCM-41). Moderate dosages enhanced the initial compressive strength by 26.9% for paste with 0.75% MCM-41 and mitigated strength losses after heating (700 °C: +7.1% for 1.0% MCM-41 and + 4.9% for 1.5% MCM-41). Excessive dosage (> 2.0%) diminished the benefits. It was demonstrated that MCM-41, when added in moderate amounts (up to 1% by cement mass), improves the thermal resistance of cement pastes by reducing portlandite, promoting secondary carbonation, and maintaining favourable mechanical performance after heating. Accordingly, the carefully selected dosage of MCM-41 constitutes one of the effective strategies for enhancing the thermal resistance of cement pastes.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Fire effects on concrete materials · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Li Y, Liu Z, Jiang J. Microstructure and macroscopic properties of low-carbon concrete subjected to elevated temperature: State-of-the-Art Review. J Build Eng. 2024. https://doi.org/10.1016/j.jobe.2024.108731.10.1016/j.jobe.2024.108731 ↗
2. Li M, Qian C, Sun W. Mechanical properties of high-strength concrete after fire. Cem Concr Res. 2004. https://doi.org/10.1016/j.cemconres.2003.11.007.10.1016/j.cemconres.2003.11.007 ↗
3. Fu Y, Wong Y, Poon C, Tang C, Lin P. Experimental study of micro/macro crack development and stress-strain relations of cement-based composite materials at elevated temperatures. Cem Concr Res. 2004. https://doi.org/10.1016/j.cemconres.2003.08.029.10.1016/j.cemconres.2003.08.029 ↗
4. Ergün A, Kürklü G, Başpnar M, Mansour M. The effect of cement dosage on mechanical properties of concrete exposed to high temperatures. Fire Saf J. 2013. https://doi.org/10.1016/j.firesaf.2012.10.016.10.1016/j.firesaf.2012.10.016 ↗
5. Alarcon-Ruiz L, Platret G, Massieu E, Ehrlacher A. The use of thermal analysis in assessing the effect of temperature on a cement paste. Cem Concr Res. 2005. https://doi.org/10.1016/j.cemconres.2004.06.015.10.1016/j.cemconres.2004.06.015 ↗
6. Stepkowska E, Blanes J, Franco F, Real C, Pérez-Rodríguez J. Phase transformation on heating of an aged cement paste. Thermochim Acta. 2004. https://doi.org/10.1016/j.tca.2003.11.057.10.1016/j.tca.2003.11.057 ↗
7. Tantawy M. Effect of high temperatures on the microstructure of cement paste. J Mater Sci Chem Eng. 2017. https://doi.org/10.4236/msce.2017.511004.10.4236/msce.2017.511004 ↗
8. Fernandes B, Carré H, Mindeguia J, Perlot C, La Borderie C. Effect of elevated temperatures on concrete made with recycled concrete aggregates—an overview. J Build Eng. 2021. https://doi.org/10.1016/j.jobe.2021.103235.10.1016/j.jobe.2021.103235 ↗
9. Chen L, Yang M, Chen Z, Xie Z, Huang L, Osman A, Farghali M, Sandanayake M, Liu E, Ahn Y, Al-Muhtaseb A, Rooney D, Yap P. Conversion of waste into sustainable construction materials: a review of recent developments and prospects. Mater Today Sustain. 2024. https://doi.org/10.1016/j.mtsust.2024.100930.10.1016/j.mtsust.2024.100930 ↗
10. Ramzi S, Hajiloo H. The effects of supplementary cementitious materials (SCMs) on the residual mechanical properties of concrete after exposure to high temperatures-review. Buildings. 2023. https://doi.org/10.3390/buildings13010103.10.3390/buildings13010103 ↗
11. Boquera L, Castro J, Pisello A, Fabiani C, D’Alessandro A, Ubertini F, Cabeza L. Thermo-mechanical stability of supplementary cementitious materials in cement paste to be incorporated in concrete as thermal energy storage material at high temperatures. J Energy Storage. 2022. https://doi.org/10.1016/j.est.2022.105370.10.1016/j.est.2022.105370 ↗
12. Ibrahim R, Hamid R, Taha M. Fire resistance of high-volume fly ash mortars with nanosilica addition. Constr Build Mater. 2012. https://doi.org/10.1016/j.conbuildmat.2012.05.028.10.1016/j.conbuildmat.2012.05.028 ↗
13. Li Q, Li Z, Yuan G. Effects of elevated temperatures on properties of concrete containing ground granulated blast furnace slag as cementitious material. Constr Build Mater. 2012. https://doi.org/10.1016/j.conbuildmat.2012.04.103.10.1016/j.conbuildmat.2012.04.103 ↗
14. Heikal M, Ali A, Ismail M, Ibrahim S. Behavior of composite cement pastes containing silica nano-particles at elevated temperature. Constr Build Mater. 2014. https://doi.org/10.1016/j.conbuildmat.2014.07.078.10.1016/j.conbuildmat.2014.07.078 ↗
15. Wang W, Liu X, Guo L, Duan P. Evaluation of properties and microstructure of cement paste blended with metakaolin subjected to high temperatures. Materials. 2019. https://doi.org/10.3390/ma12060941.10.3390/ma12060941 ↗
16. Karakurt C, Topçu L. Effect of blended cements with natural zeolite and industrial by-products on rebar corrosion and high temperature resistance of concrete. Constr Build Mater. 2012. https://doi.org/10.1016/j.conbuildmat.2012.04.045.10.1016/j.conbuildmat.2012.04.045 ↗
17. Aydin S, Baradan B. Effect of pumice and fly ash incorporation on high temperature resistance of cement based mortars. Cem Concr Res. 2007. https://doi.org/10.1016/j.cemconres.2007.02.005.10.1016/j.cemconres.2007.02.005 ↗
18. Huang Z, Luo Y, Zhang W, Ye Z, Li Z, Liang Y. Thermal insulation and high-temperature resistant cement-based materials with different pore structure characteristics: performance and high-temperature testing. J Build Eng. 2025. https://doi.org/10.1016/j.jobe.2025.111839.10.1016/j.jobe.2025.111839 ↗
19. Panek R, Szeląg M, Franus W. Effect of the MCM-41 mesoporous silica on the microstructure and performance of cement matrix. J Build Eng. 2021. https://doi.org/10.1016/j.jobe.2021.103421.10.1016/j.jobe.2021.103421 ↗
20. Szeląg M, Janek M, Panek R, Madej J, Fronczyk J. Modification of the MCM-41 mesoporous silica and its influence on the hydration and properties of a cement matrix. Constr Build Mater. 2022. https://doi.org/10.1016/j.conbuildmat.2022.128253.10.1016/j.conbuildmat.2022.128253 ↗
21. Grzegorczyk-Frańczak M, Janek M, Szeląg M, Panek R, Materak K. Modification of the polymeric admixture based on polycarboxylate ether using silica-derived secondary materials obtained from fly ash and the efficiency of its application in concrete. Case Stud Constr Mater. 2024. https://doi.org/10.1016/j.cscm.2024.e03903.10.1016/j.cscm.2024.e03903 ↗
22. Szeląg M, Rumiński P, Panek R. Microstructure transformation of MCM-41 modified cement paste subjected to thermal load and modelling of its pore size distribution. Cem Concr Compos. 2025. https://doi.org/10.1016/j.cemconcomp.2025.105930.10.1016/j.cemconcomp.2025.105930 ↗
23. Bastami M, Baghbadrani M, Aslani F. Performance of nano-Silica modified high strength concrete at elevated temperatures. Constr Build Mater. 2014. https://doi.org/10.1016/j.conbuildmat.2014.06.026.10.1016/j.conbuildmat.2014.06.026 ↗
24. Panek R, Wdowin M, Franus W, Czarna D, Stevens LA, Deng H, Liu J, Sun C, Liu H, Snape CE. Fly ash-derived MCM-41 as a low-cost silica support for polyethyleneimine in post-combustion CO2 capture. J CO2 Util. 2017. https://doi.org/10.1016/j.jcou.2017.09.015.10.1016/j.jcou.2017.09.015 ↗
25. Szeląg M, Panek R, Madej J, Fediuk R. Cement Matrix Modified by Mesoporous Silica of the MCM-41 Structure Type: Early-Age Properties and Microstructure Evolution. J Mater Civ Eng. 2022. https://doi.org/10.1061/(ASCE)MT.1943-5533.0004348.10.1061/(ASCE)MT.1943-5533.0004348 ↗
26. EN 12390-1. 2021. Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds.
27. EN 1015-. 11:2019 Methods of test for mortar for masonry - Determination of flexural and compressive strength of hardened mortar.
28. Georget F, Wilson W, Scrivener KL. edxia: Microstructure characterisation from quantified SEM-EDS hypermaps. Cem Concr Res. 2021. https://doi.org/10.1016/j.cemconres.2020.106327.10.1016/j.cemconres.2020.106327 ↗
29. Scrivener KL. Backscattered electron imaging of cementitious microstructures: Understanding and quantification. Cem Concr Compos. 2004. https://doi.org/10.1016/j.cemconcomp.2004.02.029.10.1016/j.cemconcomp.2004.02.029 ↗
30. Rossen JE, Scrivener KL. Optimization of SEM-EDS to determine the C–A–S–H composition in matured cement paste samples. Mater Charact. 2017. https://doi.org/10.1016/j.matchar.2016.11.041.10.1016/j.matchar.2016.11.041 ↗
31. Schindelin J, Rueden CT, Hiner MC, Eliceiri KW. The ImageJ ecosystem: an open platform for biomedical image analysis. Mol Reprod Dev. 2015. https://doi.org/10.1002/mrd.22489.10.1002/mrd.22489 ↗
32. Yang H, Zheng D, Tang W, Bao X, Cui H. Application of graphene and its derivatives in cementitious materials: an overview. J Build Eng. 2023. https://doi.org/10.1016/j.jobe.2022.105721.10.1016/j.jobe.2022.105721 ↗
33. Xia W, Cui S, Zhu L, Li W, Ju JW, Wang X. Effects of nano-silica modification on early age hydration process in winter construction of tunnel engineering. Constr Build Mater. 2023. https://doi.org/10.1016/j.conbuildmat.2023.133804.10.1016/j.conbuildmat.2023.133804 ↗
34. Ma Q, Guo R, Zhao Z, Lin Z, He K. Mechanical properties of concrete at high temperature-a review. Constr Build Mater. 2015. https://doi.org/10.1016/j.conbuildmat.2015.05.131.10.1016/j.conbuildmat.2015.05.131 ↗
35. Chen Z, Qiu H, Mo L, Zhao J, Yi C, Chen B, Wu C. Quantitative characterization on the restrained expansion of core concrete in SSCFST based on ultrasonic pulse velocity—a novel approach. Structures. 2024. https://doi.org/10.1016/j.istruc.2024.106854.10.1016/j.istruc.2024.106854 ↗
36. Behnood A, Ziari H. Effects of silica fume addition and water to cement ratio on the properties of high-strength concrete after exposure to high temperatures. Cem Concr Compos. 2008. https://doi.org/10.1016/j.cemconcomp.2007.06.003.10.1016/j.cemconcomp.2007.06.003 ↗
37. Shen J, Xu Q. Effect of elevated temperatures on compressive strength of concrete. Constr Build Mater. 2019. https://doi.org/10.1016/j.conbuildmat.2019.116846.10.1016/j.conbuildmat.2019.116846 ↗
38. Pimienta P, Alonso MC, McNamee RJ, Mindeguia JC. Behaviour of high-performance concrete at high temperatures: some highlights. RILEM Tech Lett. 2017. https://doi.org/10.21809/rilemtechlett.2017.53.10.21809/rilemtechlett.2017.53 ↗
39. Taylor HFW. Cement Chemistry. London: Thomas Telford Ltd; 1997.
40. Scrivener K, Snellings R, Lothenbach B, editors. A Practical Guide to Microstructural Analysis of Cementitious Materials. CRC; 2016. https://doi.org/10.1201/b19074.10.1201/b19074 ↗
41. Oliveira AM, Oliveira AP, Vieira JD, Neves A Jr., Cascudo O. Study of the development of hydration of ternary cement pastes using X-ray computed microtomography, XRD-Rietveld method, TG/DTG, DSC, calorimetry and FTIR techniques. J Build Eng. 2023. https://doi.org/10.1016/j.jobe.2022.105616.10.1016/j.jobe.2022.105616 ↗
42. Li Y, Wang H, Shi C, Zou D, Zhou A, Liu T. Effect of post-fire lime-saturated water and water–CO2 cyclic curing on strength recovery of thermally damaged high-performance concrete with different silica contents. Cem Concr Res. 2023. https://doi.org/10.1016/j.cemconres.2022.107050.10.1016/j.cemconres.2022.107050 ↗
43. Gholizadeh-Vayghan A, Meza Hernandez G, Kingne Kingne F, Gu J, Dilissen N, El Kadi M, Tysmans T, Vleugels J, Rahier H, Snellings R. Thermal reactivation of hydrated cement paste: properties and impact on cement hydration. Materials. 2024. https://doi.org/10.3390/ma17112659.10.3390/ma17112659 ↗
44. Alonso C, Fernandez L. Dehydration and rehydration processes of cement paste exposed to high temperature environments. J Mater Sci. 2004. https://doi.org/10.1023/B:JMSC.0000025827.65956.18.10.1023/B:JMSC.0000025827.65956.18 ↗
45. Rossen JE, Scrivener KL. Optimization of SEM-EDS to determine the C–A–S–H composition in matured cement paste samples. Mater Charact. 2017. https://doi.org/10.1016/j.matchar.2016.11.041.10.1016/j.matchar.2016.11.041 ↗
46. Song Q, Guo MZ, Ling TC. A review of elevated-temperature properties of alternative binders: Supplementary cementitious materials and alkali-activated materials. Constr Build Mater. 2022. https://doi.org/10.1016/j.conbuildmat.2022.127894.10.1016/j.conbuildmat.2022.127894 ↗