Effect of recycled autoclaved aerated concrete aggregate particle size and content on the microstructural and engineering properties of fly ash and silica fume based geopolymer composites
Source abstract
Abstract
This experimental study investigates the feasibility of recycling the autoclaved aerated concrete (AAC) waste as a fine aggregate in fly ash/silica fume-based geopolymer composites to address the environmental challenges of AAC disposal. In this regard, the microstructural and engineering characteristics were evaluated in detail. To produce geopolymer composites, natural sand was partially replaced with recycled AAC (r-AAC) sand in 10% increments, up to 60% by volume. Three different particle size distributions (0.125–4 mm, 0.125–2 mm, and 0.125–1 mm) were examined to assess the influence of aggregate size on composite performance. To mitigate potential degradation due to the incorporation of r-AAC sand, 10% silica fume (SF) was incorporated as a precursor by mass. A total of 38 geopolymer mixtures were produced using a mixture of sodium hydroxide and sodium silicate as an alkaline activator. The engineering properties, including workability, unit weight, and compressive strength, were evaluated alongside comprehensive microstructural analyses using Scanning Electron Microscopy (SEM), Energy Dispersive X-Ray Spectroscopy (EDX), mapping, and X-Ray Diffraction (XRD). Results indicated that increasing r-AAC content and decreasing the particle size led to a decrease in 28-day compressive strength; however, the addition of SF enhanced the mechanical performance. Microstructural findings confirmed a reduction in matrix compactness with higher r-AAC replacement, directly impacting the material performance. The study demonstrates the feasibility of utilizing r-AAC in geopolymers while highlighting the critical role of particle size and SF addition.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Qin L, Gao X. Recycling of waste autoclaved aerated concrete powder in Portland cement by accelerated carbonation. Waste Manag. 2019;89:254–64.10.1016/j.wasman.2019.04.018 ↗
2. Gyurkó Z, Jankus B, Fenyvesi O, Nemes R. Sustainable applications for utilization the construction waste of aerated concrete. J Clean Prod. 2019;230:430–44.10.1016/j.jclepro.2019.04.357 ↗
3. TGÜB. Turkish aerated concrete manufacturers association corporate information brochure. http://tgub.org.tr/SF/608/TG%C3%9CB%20Kurumsal%20Bro%C5%9F%C3%BCr%20(TR).pdf. Accessed 3 Apr 2025 (In Turkish).
4. Zou D, Que Z, Cui W, Wang X, Guo Y, Zhang S. Feasibility of recycling autoclaved aerated concrete waste for partial sand replacement in mortar. J Build Eng. 2022;52:104481.10.1016/j.jobe.2022.104481 ↗
5. Shaikh FUA. Mechanical and durability properties of fly ash geopolymer concrete containing recycled coarse aggregates. Int J Sustain Built Environ. 2016;5(2):277–87.10.1016/j.ijsbe.2016.05.009 ↗
6. İpek S. Macro and micro characteristics of eco-friendly fly ash-based geopolymer composites made of different types of recycled sand. J Build Eng. 2022;52:104431.10.1016/j.jobe.2022.104431 ↗
7. Almutairi AL, Tayeh BA, Adesina A, Isleem HF, Zeyad AM. Potential applications of geopolymer concrete in construction: a review. Case Stud Constr Mater. 2021;15:e00733.
8. Das S, Saha P, Jena SP, Panda P. Geopolymer concrete: sustainable green concrete for reduced greenhouse gas emission—a review. Mater Today Proc. 2022;60:62–71.10.1016/j.matpr.2021.11.588 ↗
9. Kermeli K, Edelenbosch OY, Crijns-Graus W, van Ruijven BJ, Mima S, van Vuuren DP, Worrell E. The scope for better industry representation in long-term energy models: modeling the cement industry. Appl Energy. 2019;240:964–85.10.1016/j.apenergy.2019.01.252 ↗
10. Duxson P, Provis JL, Lukey GC, van Deventer JSJ. The role of inorganic polymer technology in the development of ‘green concrete’. Cem Concr Res. 2007;37(12):1590–7.10.1016/j.cemconres.2007.08.018 ↗
11. Bayrak B, Alcan HG, Özelmacı Durmaz ÖÇ, İpek S, Kaplan G, Güneyisi E, Aydın AC. Studying the metakaolin content, fiber type, and high-temperature effects on the physico-mechanical properties of fly ash-based geopolymer composites. Arch Civ Mech Eng. 2025;25:2.10.1007/s43452-024-01071-9 ↗
12. Çelikten S, Sarıdemir M, Deneme İÖ. Mechanical and microstructural properties of alkali-activated slag and slag + fly ash mortars exposed to high temperature. Constr Build Mater. 2019;217:50–61.10.1016/j.conbuildmat.2019.05.055 ↗
13. Bayrak B, Alcan HG, Tanyıldızı M, Kaplan G, İpek S, Aydın AC, Güneyisi E. Effects of silica fume and rice husk ash contents on engineering properties and high-temperature resistance of slag-based prepacked geopolymers. J Build Eng. 2024;92:109746.10.1016/j.jobe.2024.109746 ↗
14. Al Bakri MM, Mohammed H, Kamarudin H, Niza IK, Zarina Y. Review on fly ash-based geopolymer concrete without Portland Cement. J Eng Technol Res. 2011;3(1):1–4.
15. Bayrak B, İpek S, Alcan HG, Kaplan G, Aydın AC, Güneyisi E. Engineering and microstructural properties of environmentally friendly alkali-activated composites containing clinker aggregate: heat-curing regime and elevated-temperature effect. Arch Civ Mech Eng. 2024;24:200.10.1007/s43452-024-00990-x ↗
16. Mermerdaş K, İpek S, Mahmood Z. Visual inspection and mechanical testing of fly ash-based fibrous geopolymer composites under freeze-thaw cycles. Constr Build Mater. 2021;283:122756.10.1016/j.conbuildmat.2021.122756 ↗
17. Mermerdaş K, Khalid LW, Bzeni DK, İpek S, Jawad DJ. Tensile strength and durability performances-based evaluation of 3D-printed and mold-cast fibrous geopolymer composites produced at various alkaline activator combinations. J Build Eng. 2024;97:111012.10.1016/j.jobe.2024.111012 ↗
18. Davidovits J. Properties of geopolymer cements. In: Proceedings First International Conference on Alkaline Cements and Concretes. Ukraine: Kiev; 1994, p. 131–49. https://www.geopolymer.org/fichiers_pdf/KIEV.pdf
19. İpek S, Mermerdaş K. Engineering properties and SEM analysis of eco-friendly geopolymer mortar produced with crumb rubber. J Sustain Constr Mater Technol. 2022;7:95–107.10.47481/jscmt.1106592 ↗
20. Beltrame NA, Dias RL, Witzke FB, Medeiros-Junior RA. Effect of carbonation curing on the physical, mechanical, and microstructural properties of metakaolin-based geopolymer concrete. Constr Build Mater. 2023;406:133403.10.1016/j.conbuildmat.2023.133403 ↗
21. Chowdhury S, Mohapatra S, Gaur A, Dwivedi G, Soni A. Study of various properties of geopolymer concrete—a review. Mater Today Proc. 2021;46(11):5687–95.10.1016/j.matpr.2020.09.835 ↗
22. Ma CK, Awang AZ, Omar W. Structural and material performance of geopolymer concrete: a review. Constr Build Mater. 2018;186:90–102.10.1016/j.conbuildmat.2018.07.111 ↗
23. Davidovits J. Geopolymers-inorganic polymeric new materials. J Therm Anal. 1991;37:1633–56.10.1007/BF01912193 ↗
24. Neupane K. Evaluation of environmental sustainability of one-part geopolymer binder concrete. Clean Mater. 2022;6:100138.10.1016/j.clema.2022.100138 ↗
25. Turner LK, Collins FG. Carbon dioxide equivalent (CO2-e) emissions: a comparison between geopolymer and OPC cement concrete. Constr Build Mater. 2013;43:125–30.10.1016/j.conbuildmat.2013.01.023 ↗
26. Xie T, Ozbakkaloglu T. Behavior of low-calcium fly ash bottom ash based geopolymer concrete cured at ambient temperature. Ceram Int. 2015;85:5945–58.10.1016/j.ceramint.2015.01.031 ↗
27. Hake SL, Damgir RM, Patankar SV. Temperature effect on lime powder added geopolymer concrete. Adv Civ Eng. 2018;11:1–5.
28. Aydın S, Baradan B. Mechanical and microstructural properties of heat cured alkali-activated slag mortars. Mater Des. 2012;35:374–83.10.1016/j.matdes.2011.10.005 ↗
29. Yang T, Yang S, Sun Z, Wang S, Pang R. Deterioration mechanism of alkali-activated slag and fly ash blended recycled aggregate concrete under freeze-thaw cycles. J Build Eng. 2025;99:111555.10.1016/j.jobe.2024.111555 ↗
30. Wei H, Wan H, Yuan S, Liu G, Teng J, Shi N, Liu Z. A new gelling material: properties of recycled aggregate concrete under conditions of complete cement replacement using steel slag, ore slag, and fly ash. Constr Build Mater. 2025;464:140180.10.1016/j.conbuildmat.2025.140180 ↗
31. Kumar A, Arora HC, Kapoor NR, Kontoni DPN, Kumar K, Jahangir H, Bhushan B. Practical applicable model for estimating the carbonation depth in fly-ash based concrete structures by utilizing adaptive neuro-fuzzy inference system. Comput Concr. 2023;32(2):119–38.
32. Li J, Chen J, Bu C, Zhang M, Yu J, Yu X, Sun Y, Yu Y. Synergistic enhancement of sulfate resistance in recycled aggregate concrete through multi-pathway blocking via carbonation treatment and fly ash incorporation. Constr Build Mater. 2025;491:142685.10.1016/j.conbuildmat.2025.142685 ↗
33. Rovnaník P, Šafránková K. Thermal behaviour of metakaolin/fly ash geopolymers with chamotte aggregate. Materials. 2016;9(7):535.10.3390/ma9070535 ↗
34. Mermerdaş K, Manguri S, Nassani DE, Oleiwi SM. Effect of aggregate properties on the mechanical and absorption characteristics of geopolymer mortar. Eng Sci Technol Int J. 2017;20(6):1642–52.
35. Mohseni E, Kazemi MJ, Koushkbaghi M, Zehtab B, Behforouz B. Evaluation of mechanical and durability properties of fiber-reinforced lightweight geopolymer composites based on rice husk ash and nanoalumina. Constr Build Mater. 2019;209:532–40.10.1016/j.conbuildmat.2019.03.067 ↗
36. Ekmen Ş, Mermerdaş K, Algın Z. Effect of oxide composition and ingredient proportions on the rheological and mechanical properties of geopolymer mortar incorporating pumice aggregate. J Build Eng. 2021;34:101893.10.1016/j.jobe.2020.101893 ↗
37. Li H, Gao P, Xu F, Sun T, Zhou Y, Zhu J, Peng C, Lin J. Effect of fine aggregate particle characteristics on mechanical properties of fly ash-based geopolymer mortar. Minerals. 2021;11(8):897.10.3390/min11080897 ↗
38. Wongsa A, Sata V, Nematollahi B, Sanjayan J, Chindaprasirt P. Mechanical and thermal properties of lightweight geopolymer mortar incorporating crumb rubber. J Clean Prod. 2018;195:1069–80.10.1016/j.jclepro.2018.06.003 ↗
39. Poggetto GD, D’Angelo A, Blanco I, Piccolella S, Leonelli C, Catauro M. FT-IR study, thermal analysis, and evaluation of the antibacterial activity of a MK-geopolymer mortar using glass waste as fine aggregate. Polymers. 2021;13(17):2970.10.3390/polym13172970 ↗
40. Priyadharshini P, Ramamurthy K, Robinson RG. Excavated soil waste as fine aggregate in fly ash based geopolymer mortar. Appl Clay Sci. 2017;146:81–91.10.1016/j.clay.2017.05.038 ↗
41. Zhu P, Hua M, Liu H, Wang X, Chen C. Interfacial evaluation of geopolymer mortar prepared with recycled geopolymer fine aggregates. Constr Build Mater. 2020;259:119849.10.1016/j.conbuildmat.2020.119849 ↗
42. Mermerdaş K, İpek S, Sor NH, Mulapeer ES, Ekmen Ş. The impact of artificial lightweight aggregate on the engineering features of geopolymer mortar. Turk J Nat Sci. 2020;9(1):79–90.
43. Stock AF, Hannantt DJ, Williams RIT. The effect of aggregate concentration upon the strength and modulus of elasticity of concrete. Mag Concr Res. 1979;31(109):225–34.10.1680/macr.1979.31.109.225 ↗
44. Dilbas H. An investigation on effect of aggregate distribution on physical and mechanical properties of recycled aggregate concrete (RAC). J Sustain Constr Mater Technol. 2022;7(2):108–18.10.47481/jscmt.1106786 ↗
45. Mehta PK, Monteiro PJM. Concrete: microstructure, properties, and materials, 3rd Edition. New York: McGraw-Hill; 2006 (ISBN: 0071462899).
46. Erdoğan TY. Beton (Concrete). 6th Edition. Ankara: ODTÜ Yayıncılık; 2016. (In Turkish).
47. TS EN 933-1. Tests for geometrical properties of aggregates—part 1: determination of particle size distribution—sieving method. Türkiye: Turkish Standards Institution; 2012.
48. Lazorenko G, Kasprzhitskii A, Fini EH. Polyethylene terephthalate (PET) waste plastic as natural aggregate replacement in geopolymer mortar production. J Clean Prod. 2022;375:134083.10.1016/j.jclepro.2022.134083 ↗
49. ASTM C230/230 M-20. Standard specification for flow table for use in tests of hydraulic cement. West Conshohocken: ASTM International; 2020.
50. ASTM C1437-20. Standard test method for flow of hydraulic cement mortar. West Conshohocken: ASTM International; 2020.
51. ASTM C138/C138M-17a. Standard test method for density (unit weight), yield, and air content (gravimetric) of concrete. West Conshohocken: ASTM International; 2017.
52. ASTM C109/C109M-20b. Standard test method for compressive strength of hydraulic cement mortars (using 2-in. or [50 mm] cube specimens). West Conshohocken: ASTM International; 2020.
53. Suwan T, Wattanachai P. Properties and internal curing of concrete containing recycled autoclaved aerated lightweight concrete as aggregate. Adv Mater Sci Eng. 2017;2017:2394641.10.1155/2017/2394641 ↗
54. Murthi P, Sri NV, Baig MM, Sajid MA, Kaveri S. Development of green concrete using effective utilization of autoclaved aerated concrete brick trash as lightweight aggregate. Mater Today Proc. 2022;68(5):1599–608.10.1016/j.matpr.2022.07.316 ↗
55. Topçu İB, Demir A, Karakurt C. Gazbeton kırıklarının betonda agrega olarak kullanılması. Deprem Sempozyumu, Kocaeli, Türkiye 23–25 Mart; 2005, p. 857–63 (In Turkish).
56. Topçu İB, Sarıdemir M. Prediction of properties of waste AAC aggregate concrete using artificial neural network. Comput Mater Sci. 2007;41:117–25.10.1016/j.commatsci.2007.03.010 ↗
57. Yang J, Wang F, He X, Su Y, Wang T, Ma M. Potential usage of porous autoclaved aerated concrete waste as eco-friendly internal curing agent for shrinkage compensation. J Clean Prod. 2021;320:128894.10.1016/j.jclepro.2021.128894 ↗
58. Tho-In T, Sata V, Boonserm K, Chindaprasirt P. Compressive strength and microstructure analysis of geopolymer paste using waste glass powder and fly ash. J Clean Prod. 2018;172:2892–8.10.1016/j.jclepro.2017.11.125 ↗
59. Manikandan P, Vasugi V. Potential utilization of waste glass powder as a precursor material in synthesizing ecofriendly ternary blended geopolymer matrix. J Clean Prod. 2022;355:131860.10.1016/j.jclepro.2022.131860 ↗
60. Gill P, Rathanasalam VS, Jangra P, Pham TM, Ashish DK. Mechanical and microstructural properties of fly ash-based engineered geopolymer mortar incorporating waste marble powder. Energy Ecol Environ. 2024;9(2):159–74.10.1007/s40974-023-00296-3 ↗