journal article·2026-03-18

Towards high-performance abrasive waterjet milling of nickel-based superalloys: current progress, limitations and future research opportunities

Ruyi Zhao, Dun Liu, Weijie Zhang, Hongtao Zhu, Chuanzhen Huang, Hankun Bao, Jize Zhao, Yue Dai, Yifei Zhang

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Erosion and Abrasive Machining · Advanced Surface Polishing Techniques · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Zhang XS, Chen YJ, Hu JL. Recent advances in the development of aerospace materials. Prog Aerosp Sci. 2018;97:22–34. https://doi.org/10.1016/j.paerosci.2018.01.001.10.1016/j.paerosci.2018.01.001 ↗
2. Huda Z, Edi P. Materials selection in design of structures and engines of supersonic aircrafts: A review. Mater Design. 2013;46:552–60. https://doi.org/10.1016/j.matdes.2012.10.001.10.1016/j.matdes.2012.10.001 ↗
3. Yang XW, Meng TX, Chu Q, Su Y, Guo ZG, Xu R, Fan WL, Ma TJ, Li WY. A review of linear friction welding of Ni-based superalloys. Int J Min Metall Mater. 2024;31:1382–91. https://doi.org/10.1007/s12613-023-2782-7.10.1007/s12613-023-2782-7 ↗
4. Dev Jithin S, Selvaraj SK, Vishaal KEV, Sundaramali G. (2022). Comparative analysis between 5th and 6th generation superalloys and previous generation superalloys. Advances in Materials Science and Engineering, 2022, 3530689. https://doi.org/10.1155/2022/353068910.1155/2022/3530689 ↗
5. Thellaputta GR, Chandra PS, Rap CSP. Machinability of nickel based superalloys: A review. Mater Today: Proc. 2017;4(2):3712–21. https://doi.org/10.1016/j.matpr.2017.02.266.10.1016/j.matpr.2017.02.266 ↗
6. Li P, Xin Z, Sun F, Jin X, Zhang C. Microstructure Evolution and Damage Mechanism of DD9 Single Crystal Superalloy-Thermal Barrier Coating System Under High Temperature Oxidation: A Comparative Study with DD6. Materials. 2025;18(4332). https://doi.org/10.3390/ma1818433.10.3390/ma1818433 ↗
7. Satyanarayana DVV, Prasad NE. Nickel-Based Superalloys. Aerosp Mater Mater Technol. 2016;1:199–228. https://doi.org/10.1007/978-981-10-2134-3.10.1007/978-981-10-2134-3 ↗
8. Bi LJ, Yan H, Zhang PL, Shi HC, Li ZY, Li RD. Influence of rare earth oxides on microstructure and mechanical properties of nickel-based superalloys fabricated by high energy beam processing: A review. J Rare Earths. 2024;42(9):1629–45. https://doi.org/10.1016/j.jre.2023.10.007.10.1016/j.jre.2023.10.007 ↗
9. Tan Q, Liu K, Li J, Geng SN, Sun LY, Skuratov V. A review on cracking mechanism and suppression strategy of nickel-based superalloys during laser cladding. J Alloys Compd. 2024;1001:175164. https://doi.org/10.1016/j.jallcom.2024.175164.10.1016/j.jallcom.2024.175164 ↗
10. Gupta SN, Chak SK. Grinding temperature and its consequences on induced residual stresses during grinding of nickel-based superalloys: a review. Eng Res Express. 2022;4(4):042002. https://doi.org/10.1088/2631-8695/acaa1d.10.1088/2631-8695/acaa1d ↗
11. Du JH, Lu XD, Deng Q, Bi ZN. Progress in the research and manufacture of GH4169 alloy. J Iron Steel Res Int. 2015;22:657–63. https://doi.org/10.1016/S1006-706X(15)30054-6.10.1016/S1006-706X(15)30054-6 ↗
12. Liu LZ, Gao YF, Wu XH, Wang MQ, Du JH. High-temperature fatigue crack growth behaviour of GH4169 alloys with different heat treatment methods. Int J Fract. 2022;236:161–73. https://doi.org/10.1007/s10704-022-00643-1.10.1007/s10704-022-00643-1 ↗
13. Alexandre F, Deyber S, Pineau A. Modelling the optimum grain size on the low cycle fatigue life of a Ni based superalloy in the presence of two possible crack initiation sites. Scripta Mater. 2004;50(1):25–30. https://doi.org/10.1016/j.scriptamat.2003.09.043.10.1016/j.scriptamat.2003.09.043 ↗
14. Gao P, Zhang KF, Zhang BG, Jiang SS, Zhang BW. Microstructures and high temperature mechanical properties of electron beam welded Inconel 718 superalloy thick plate. Trans Nonferrous Met Soc China. 2011;21(2):s315–22. https://doi.org/10.1016/S1003-6326(11)61598-7.10.1016/S1003-6326(11)61598-7 ↗
15. Liao ZR, Xu DD, García Luna G, Axinte D, Augustinavicius G, Sarasua JA, Wretland A. Influence of surface integrity induced by multiple machining processes upon the fatigue performance of a nickel based superalloy. J Mater Process Technol. 2021;298:117313. https://doi.org/10.1016/j.jmatprotec.2021.117313.10.1016/j.jmatprotec.2021.117313 ↗
16. Suárez A, Veiga F, Polvorosa R, Artaza T, Holmberg J, López de Lacalle LN, Wretland A. Surface integrity and fatigue of non-conventional machined Alloy 718. J Manuf Process. 2019;48:44–50. https://doi.org/10.1016/j.jmapro.2019.09.041.10.1016/j.jmapro.2019.09.041 ↗
17. Jadam T, Sahu SK, Datta S, Masanta M. EDM performance of Inconel 718 superalloy: application of multi-walled carbon nanotube (MWCNT) added dielectric media. J Brazilian Soc Mech Sci Eng. 2019;41:305. https://doi.org/10.1007/s40430-019-1813-9.10.1007/s40430-019-1813-9 ↗
18. Ay M, Çaydas U, Hascalik A. Effect of traverse speed on abrasive waterjet machining of age hardened Inconel 718 nickel-based superalloy [J]. Mater Manuf Processes. 2010;25(10):1160–5. https://doi.org/10.1080/10426914.2010.502953.10.1080/10426914.2010.502953 ↗
19. Hasan M, Zhao JW, Jiang ZY. A review of modern advancements in micro drilling techniques. J Manuf Process. 2017;29:343–75. https://doi.org/10.1016/j.jmapro.2017.08.006.10.1016/j.jmapro.2017.08.006 ↗
20. Singh M, Singh S, Kumar S. Environmental aspects of various electrolytes used in electrochemical discharge machining process. J Brazilian Soc Mech Sci Eng. 2020;42:395. https://doi.org/10.1007/s40430-020-02492-2.10.1007/s40430-020-02492-2 ↗
21. Duan ZJ, Li CH, Ding WF, Zhang YB, Yang M, Gao T, Cao HJ, Xu XF, Wang DZ, Mao C, Li HN, Kumar GM, Said Z, Debnath S, Jamil M, Ali HM. Milling force model for aviation aluminum alloy: Academic insight and perspective analysis. Chin J Mech Eng. 2021;34:18. https://doi.org/10.1186/s10033-021-00536-9.10.1186/s10033-021-00536-9 ↗
22. Wang R, Yang DY, Wang W, Wei FY, Lu YW, Li YQ. Tool wear in nickel-based superalloy machining: An overview. Processes. 2022;10(11):2380. https://doi.org/10.3390/pr10112380.10.3390/pr10112380 ↗
23. Bellotti M, Caballero JRDE, Qian J, Reynaerts D. Effects of partial tool engagement in micro-EDM milling and adaptive tool wear compensation strategy for efficient milling of inclined surfaces. Journal Mater Process Technology. 2021;288:116852. https://doi.org/10.1016/j.jmatprotec.2020.116852.10.1016/j.jmatprotec.2020.116852 ↗
24. Wang JT, Xu ZY, Wang J, Zhu D. Anodic dissolution characteristics of Inconel 718 in C6H5K3O7 and NaNO3 solutions by pulse electrochemical machining. Corros Sci. 2021;183:109335. https://doi.org/10.1016/j.corsci.2021.109335.10.1016/j.corsci.2021.109335 ↗
25. Cashman M. (2015). Alternative cut-off and surface finishing of investment castings (Master thesis, University of Birmingham). https://etheses.bham.ac.uk/id/eprint/5873/
26. Liu D, Huang CZ, Zhu HT, Wang J, Yao P. Investigation on Material Response to Ultrahigh Velocity Impact on Ceramics by Micro Particle. Tribol Lett. 2016;64:43. https://doi.org/10.1007/s11249-016-0779-3.10.1007/s11249-016-0779-3 ↗
27. Billingham J, Miron CB, Axinte DA, Kong MC. Mathematical modelling of abrasive waterjet footprints for arbitrarily moving jets: Part II—Overlapped single and multiple straight paths. Int J Mach Tools Manuf. 2013;68:30–9. https://doi.org/10.1016/j.ijmachtools.2013.01.003.10.1016/j.ijmachtools.2013.01.003 ↗
28. Liu D, Huang CZ, Wang J, Zhu HT. Material removal mechanisms of ceramics turned by abrasive waterjet (AWJ) using a novel approach. Ceram Int. 2021;47(11):15165–72. https://doi.org/10.1016/j.ceramint.2021.02.076.10.1016/j.ceramint.2021.02.076 ↗
29. Hreha P, Radvanská A, Hloch S, Peržel V, Królczyk G, Monková K. Determination of vibration frequency depending on abrasive mass flow rate during abrasive water jet cutting. Int J Adv Manuf Technol. 2015;77(1–4):763–74. https://doi.org/10.1007/s00170-014-6497-9.10.1007/s00170-014-6497-9 ↗
30. Zhang YF, Liu D, Zhang WJ, Zhu HT, Huang CZ. Damage study of fiber-reinforced composites drilled by abrasive waterjet —challenges and opportunities. Int J Adv Manuf Technol. 2022;119:41–55. https://doi.org/10.1007/s00170-021-08246-1.10.1007/s00170-021-08246-1 ↗
31. Mogul YI, Nasir I, Myler P. Investigation and optimization for depth of cut and surface roughness for control depth milling in Titanium Ti6AL4V with abrasive water jet cutting. Mater Today: Proc. 2020;28(Part 2):604–10. https://doi.org/10.1016/j.matpr.2019.12.229.10.1016/j.matpr.2019.12.229 ↗
32. Holmberg J, Wretland A, Berglund J. Abrasive Water Jet Milling as An Efficient Manufacturing Method for Superalloy Gas Turbine Components. J Manuf Mater Process. 2022;6(5):124. https://doi.org/10.3390/jmmp6050124.10.3390/jmmp6050124 ↗
33. Kumar TND, Srinivasu DS. Integration of CFD simulated abrasive waterjet flow dynamics with the material removal model for kerf geometry prediction in overlapped erosion on Ti-6Al-4V alloy. Simul Model Pract Theory. 2023;127:102788. https://doi.org/10.1016/j.simpat.2023.102788.10.1016/j.simpat.2023.102788 ↗
34. Hashish M. An investigation of milling with abrasive-waterjets. J Eng Ind. 1989;111(2):158–66. https://doi.org/10.1115/1.3188745.10.1115/1.3188745 ↗
35. Nag A, Klichová D, Hlaváček P, Petrů J, Hloch S. (2025). Optimisation of Abrasive Waterjet Milling Technique for Pocket Milling Operations. In: Sitek, L., Valentinčič, J., Trieb, F.H., Hloch, S, editors Advances in Water Jetting II (Water Jet 2023). (pp. 110–121). https://doi.org/10.1007/978-3-031-72778-8_910.1007/978-3-031-72778-8_9 ↗
36. Sourd X, Zitoune R, Crouzeix L, Lamouche D. (2020). Controlled depth milling of hybrid aerospace grade materials using abrasive water jet–Critical review and analysis. In Machining and machinability of fiber reinforced polymer composites (pp. 225–280). Springer. https://doi.org/10.1007/978-981-33-4153-1_910.1007/978-981-33-4153-1_9 ↗
37. Finnie I. Erosion of surfaces by solid particles. Wear. 1960;3(2):87–103. https://doi.org/10.1016/0043-1648(60)90055-7.10.1016/0043-1648(60)90055-7 ↗
38. Bitter JGA. A study of erosion phenomena part I. Wear. 1963;6(1):5–21. https://doi.org/10.1016/0043-1648(63)90003-6.10.1016/0043-1648(63)90003-6 ↗
39. Bitter JGA. A study of erosion phenomena: Part II. Wear. 1963;6(3):169–90. https://doi.org/10.1016/0043-1648(63)90073-5.10.1016/0043-1648(63)90073-5 ↗
40. Hashish M. A modeling study of metal cutting with abrasive waterjets. J Eng Mater Technol. 1984;106(1):88–100. https://doi.org/10.1115/1.3225682.10.1115/1.3225682 ↗
41. Hashish M. The effect of beam angle in abrasive-waterjet machining. J Eng Ind. 1993;115(1):51–6. https://doi.org/10.1115/1.2901638.10.1115/1.2901638 ↗
42. Hashish M. A model for abrasive-waterjet (AWJ) machining. J Eng Mater Technol. 1989;111(2):154–62. https://doi.org/10.1115/1.3226448.10.1115/1.3226448 ↗
43. Hashish M. Visualization of the abrasive-waterjet cutting process. Exp Mech. 1988;28:159–69. https://doi.org/10.1007/BF02317567.10.1007/BF02317567 ↗
44. Kong MC, Anwar S, Billingham J, Axinte DA. Mathematical modelling of abrasive waterjet footprints for arbitrarily moving jets: Part I—single straight paths. Int J Mach Tools Manuf. 2012;53(1):58–68. https://doi.org/10.1016/j.ijmachtools.2011.09.010.10.1016/j.ijmachtools.2011.09.010 ↗
45. Axinte DA, Srinivasu DS, Billingham J, Cooper M. Geometrical modelling of abrasive waterjet footprints: A study for 90° jet impact angle. CIRP Ann. 2010;59(1):341–6. https://doi.org/10.1016/j.cirp.2010.03.112.10.1016/j.cirp.2010.03.112 ↗
46. Ozcan Y, Tunc LT, Kopacka J, Cetin B, Sulitka M. Modelling and simulation of controlled depth abrasive water jet machining (AWJM) for roughing passes of free-form surfaces. Int J Adv Manuf Technol. 2021;114:3581–96. https://doi.org/10.1007/s00170-021-07131-1.10.1007/s00170-021-07131-1 ↗
47. Yerramareddy S, Lu SC-Y, Arnold KF. Developing empirical models from observational data using artificial neural networks. Journal Intell Manufacturing. 1993;4:33–41. https://doi.org/10.1007/BF00124979.10.1007/BF00124979 ↗
48. Zhang YF, Liu D, Zhang WJ, Zhu HT, Huang CZ. Mechanism of Cf/SiC hole making with high shape precision using abrasive waterjet based on response surface method. Ceram Int. 2023;49(3):4129–40. https://doi.org/10.1016/j.ceramint.2022.09.293.10.1016/j.ceramint.2022.09.293 ↗
49. Wan L, Liu JY, Qian YN, Wang XS, Wu SJ, Du H, Li D. Analytical modeling and multi-objective optimization algorithm for abrasive waterjet milling Ti6Al4V. Int J Adv Manuf Technol. 2022;123:4367–84. https://doi.org/10.1007/s00170-022-10396-9.10.1007/s00170-022-10396-9 ↗
50. Karmiris-Obratański P, Kudelski R, Karkalos NE, Markopoulos AP. Determination of the correlation between process parameters and kerf characteristics in abrasive waterjet milling of high strength 7075-T6 aluminum alloy. Procedia Manuf. 2020;51:812–7. https://doi.org/10.1016/j.promfg.2020.10.114.10.1016/j.promfg.2020.10.114 ↗
51. Alberdi A, Rivero A, López de Lacalle LN, Etxeberria I, Suárez A. Effect of process parameter on the kerf geometry in abrasive water jet milling. The Int J Adv Manuf Technology. 2010;51:467–80. https://doi.org/10.1007/s00170-010-2662-y.10.1007/s00170-010-2662-y ↗
52. Kolahan F, Khajavi A. Modeling and optimization of abrasive waterjet parameters using regression analysis. World Acad Sci Eng Technol Int J Mech Aerosp Industrial Mechatron Manuf Eng. 2009;3:1425–30. https://api.semanticscholar.org/CorpusID:18906611.
53. Mohankumar V, Kanthababu M. Semi-empirical model for depth of cut in abrasive waterjet machining of metal matrix composites. J Brazilian Soc Mech Sci Eng. 2020;42:507. https://doi.org/10.1007/s40430-020-02581-2.10.1007/s40430-020-02581-2 ↗
54. Karkalos NE, Karmiris-Obratański P. A comparative study of efficient modeling approaches for performing controlled-depth abrasive waterjet pocket milling. Machines. 2024;12(3):168. https://doi.org/10.3390/machines12030168.10.3390/machines12030168 ↗
55. Liang ZY, Shi YH, Xu T, Wang ZS, Zhan JT. A complementary approach to experimental modeling and analysis of welding processes: dimensional analysis. Int J Adv Manuf Technol. 2023;127:3077–95. https://doi.org/10.1007/s00170-023-11544-5.10.1007/s00170-023-11544-5 ↗
56. Yu Y, Wang XP, Gao H, Guo XG. An approach for predicting groove cross-sectional profile in abrasive waterjet milling. Int J Adv Manuf Technol. 2025;136:4865–76. https://doi.org/10.1007/s00170-025-15111-y.10.1007/s00170-025-15111-y ↗
57. Nguyen T, Wang J, Kwok NM, Li H, Ha QP. (2015). Predictive models for the geometrical characteristics of channels milled by abrasive waterjet. Proceedings of the 2015 IEEE International Conference on Automation Science and Engineering (CASE). (pp. 1459–1464). https://doi.org/10.1109/CoASE.2015.729430510.1109/CoASE.2015.7294305 ↗
58. Yuan YM, Chen JF, Gao H, Wang XP. An investigation into the abrasive waterjet milling circular pocket on titanium alloy. Int J Adv Manuf Technol. 2020;107(11–12):4503–15. https://doi.org/10.1007/s00170-020-05294-x.10.1007/s00170-020-05294-x ↗
59. EITobgy M, Ng E-G, Elbestawi MA. Modelling of abrasive waterjet machining: A new approach. CIRP Ann. 2005;54(1):285–8. https://doi.org/10.1016/S0007-8506(07)60104-8.10.1016/S0007-8506(07)60104-8 ↗
60. Anwar S, Axinte DA, Becker AA. Finite element modelling of abrasive waterjet milled footprints. J Mater Process Technol. 2013;213(2):180–93. https://doi.org/10.1016/j.jmatprotec.2012.09.006.10.1016/j.jmatprotec.2012.09.006 ↗
61. Lozano Torrubia P, Axinte DA, Billingham J. Stochastic modelling of abrasive waterjet footprints using finite element analysis. Int J Mach Tools Manuf. 2015;95:39–51. https://doi.org/10.1016/j.ijmachtools.2015.05.001.10.1016/j.ijmachtools.2015.05.001 ↗
62. Zhang WJ, Liu D, Zhang YF, Dai Y, Zhu HT, Huang CZ, Feng SC. Numerical investigations on the material response of nickel-based superalloys during abrasive waterjet milling. J Manuf Process. 2024;120:878–94. https://doi.org/10.1016/j.jmapro.2024.04.086.10.1016/j.jmapro.2024.04.086 ↗
63. Singh R, Sharma V. Machining induced surface integrity behavior of nickel-based superalloy: Effect of lubricating environments. J Mater Process Technol. 2022;307:117701. https://doi.org/10.1016/j.jmatprotec.2022.117701.10.1016/j.jmatprotec.2022.117701 ↗
64. Chittewar SL, Patil NG. Surface integrity of conventional and additively manufactured nickel superalloys: A review. Mater Today: Proc. 2021;44Part 1:701–8. https://doi.org/10.1016/j.matpr.2020.10.614.10.1016/j.matpr.2020.10.614 ↗
65. Thakur A, Gangopadhyay S. State-of-the-art in surface integrity in machining of nickel-based super alloys. Int J Mach Tools Manuf. 2016;100:25–54. https://doi.org/10.1016/j.ijmachtools.2015.10.001.10.1016/j.ijmachtools.2015.10.001 ↗
66. Boud F, Carpenter C, Folkes J, Shipway PH. Abrasive waterjet cutting of a titanium alloy: The influence of abrasive morphology and mechanical properties on workpiece grit embedment and cut quality. J Mater Process Technol. 2010;210(15):2197–205. https://doi.org/10.1016/j.jmatprotec.2010.08.006.10.1016/j.jmatprotec.2010.08.006 ↗
67. ordham J. The effect of different profiling techniques on the fatigue performance of metallic membranes of AISI 301 and Inconel 718. Int J Fatigue. 1997;19:487–501. https://doi.org/10.1016/S0142-1123(96)00072-2.10.1016/S0142-1123(96)00072-2 ↗
68. etu H, Spelt JK, Papini M. Reduction of particle embedding in solid particle erosion of polymers. Wear. 2011;270(11–12):922–8. https://doi.org/10.1016/j.wear.2011.02.012.10.1016/j.wear.2011.02.012 ↗
69. ramanik A, Dixit AR, Chattopadhyaya S, Uddin MS, Dong Y, Basak AK, Littlefair G. Fatigue life of machined components. Adv Manuf. 2017;5:59–76. https://doi.org/10.1007/s40436-016-0168-z.10.1007/s40436-016-0168-z ↗
70. Fowler G, Shipway PH, Pashby IR. A technical note on grit embedment following abrasive water-jet milling of a titanium alloy. J Mater Process Technol. 2005;159(3):356–68. https://doi.org/10.1016/j.jmatprotec.2004.05.024.10.1016/j.jmatprotec.2004.05.024 ↗
71. hen FL, Siores E, Patel K, Momber AW. Minimising particle contamination at abrasive waterjet machined surfaces by a nozzle oscillation technique. Int J Mach Tools Manuf. 2002;42(13):1385–90. https://doi.org/10.1016/S0890-6955(02)00081-0.10.1016/S0890-6955(02)00081-0 ↗
72. Sourd X, Zitoune R, Hejjaji A, Salem M, Hor A, Lamouche D. Plain water jet cleaning of titanium alloy after abrasive water jet milling: Surface contamination and quality analysis in the context of maintenance. Wear. 2021;477:203833. https://doi.org/10.1016/j.wear.2021.203833.10.1016/j.wear.2021.203833 ↗
73. Liao ZR, Sanchez I, Xu DD, Axinte D, Augustinavicius G, Wretland A. Dual-processing by abrasive waterjet machining—A method for machining and surface modification of nickel-based superalloy. J Mater Process Technol. 2020;285:116768. https://doi.org/10.1016/j.jmatprotec.2020.116768.10.1016/j.jmatprotec.2020.116768 ↗
74. Cano-Salinas L, Sourd X, Moussaoui K, Le Roux S, Salem M, Hor A, Zitoune R. Effect of process parameters of Plain Water Jet on the cleaning quality, surface and material integrity of Inconel 718 milled by Abrasive Water Jet. Tribol Int. 2023;178(Part B):108094. https://doi.org/10.1016/j.triboint.2022.108094.10.1016/j.triboint.2022.108094 ↗
75. Shipway PH, Fowler G, Pashby IR. Characteristics of the surface of a titanium alloy following milling with abrasive waterjets. Wear. 2005;258(1–4):123–32. https://doi.org/10.1016/j.wear.2004.04.005.10.1016/j.wear.2004.04.005 ↗
76. Stachowiak GB, Stachowiak GW. The effects of particle characteristics on three-body abrasive wear. Wear. 2001;249(3–4):201–7. https://doi.org/10.1016/S0043-1648(01)00557-9.10.1016/S0043-1648(01)00557-9 ↗
77. Patel KJ. Quantitative evaluation of abrasive contamination in ductile material during abrasive water jet machining and minimising with a nozzle head oscillation technique. Int J Mach Tools Manuf. 2004;44(10):1125–32. https://doi.org/10.1016/j.ijmachtools.2003.12.007.10.1016/j.ijmachtools.2003.12.007 ↗
78. Yuvaraj N, Pradeep Kumar M. Cutting of aluminium alloy with abrasive water jet and cryogenic assisted abrasive water jet: A comparative study of the surface integrity approach. Wear. 2016;362–363:18–32. https://doi.org/10.1016/j.wear.2016.05.008.10.1016/j.wear.2016.05.008 ↗
79. Kong MC, Axinte D. (2009). Response of titanium aluminide alloy to abrasive waterjet cutting: Geometrical accuracy and surface integrity issues versus process parameters. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223(1), 19–42. https://doi.org/10.1243/09544054JEM122610.1243/09544054JEM1226 ↗
80. Rajhi W, Alatawi I, Subhani T, Ayadi B, Al-Ghamdi A, Khaliq A. A contribution to numerical prediction of surface damage and residual stresses on die-sinking EDM of Ti6Al4V. J Manuf Processes 68(Part A). 2021;1458–84. https://doi.org/10.1016/j.jmapro.2021.06.056.10.1016/j.jmapro.2021.06.056 ↗
81. Gao HJ, Li X, Li BH, Wu Q, Ma YD, Jian XJ, Song HC, Chen SG. Residual stress and microstructure of Ti6Al4V treated by thermal-vibratory stress relief process. J Mater Res Technol. 2022;18:5161–81. https://doi.org/10.1016/j.jmrt.2022.04.137.10.1016/j.jmrt.2022.04.137 ↗
82. Qin Z, Li B, Chen R, Zhang H, Xue HQ, Yao CF, Tan L. Effect of shot peening on high cycle and very high cycle fatigue properties of Ni-based superalloys. Int J Fatigue. 2023;168:107429. https://doi.org/10.1016/j.ijfatigue.2022.107429.10.1016/j.ijfatigue.2022.107429 ↗
83. Wang Z, Liao Z, Axinte D, Dong X, Xu D, Augustinavicius G. Analytical model for predicting residual stresses in abrasive waterjet peening. Mater Design. 2021;212:110209. https://doi.org/10.1016/j.matdes.2021.110209.10.1016/j.matdes.2021.110209 ↗
84. Holmberg J, Berglund J, Wretland A, Beno T. Evaluation of surface integrity after high energy machining with EDM, laser beam machining and abrasive water jet machining of alloy 718. Int J Adv Manuf Technol. 2019;100:1575–91. https://doi.org/10.1007/s00170-018-2697-z.10.1007/s00170-018-2697-z ↗
85. Cano Salinas L, Moussaoui K, Hejjaji A, Salem M, Hor A et al. (2021). Multi-scale characterization of material and surface integrity of Inconel 718 when milling by Abrasive Water Jet process: Context of repair application. In ESAFORM 2021-24th International ESAFORM Conference on Material Forming (13 p.). Liège (online), Belgium. https://doi.org/10.25518/esaform21.421210.25518/esaform21.4212 ↗
86. Lieblich M, Barriuso S, Ibáñez J, Ruiz-de-Lara L, Díaz M, Ocaña JL, Alberdi A, González-Carrasco JL. On the fatigue behavior of medical Ti6Al4V roughened by grit blasting and abrasiveless waterjet peening. J Mech Behav Biomed Mater. 2016;63:390–8. https://doi.org/10.1016/j.jmbbm.2016.07.011.10.1016/j.jmbbm.2016.07.011 ↗
87. Zhang WJ, Liu D, Zhang YF, Zhu HT, Huang CZ, Dai Y, Li BH, Feng SC. A novel assessment study of surface integrity for nickel-based superalloy milled by abrasive waterjet considering the abrasive embedding. Int J Adv Manuf Technol. 2024;135:1603–16. https://doi.org/10.1007/s00170-024-14623-3.10.1007/s00170-024-14623-3 ↗
88. Salinas LC, Moussaoui K, Hejjaji A, Salem M, Hor A, Zitoune R. Influence of abrasive water jet parameters on the surface integrity of Inconel 718. Int J Adv Manuf Technol. 2021;114:997–1009. https://doi.org/10.1007/s00170-021-06888-9.10.1007/s00170-021-06888-9 ↗
89. Richter R, Müller T. Measurement of residual stresses: Determination of measurement uncertainty of the hole-drilling method used in aluminium alloys. Exp Tech. 2016;41:79–85. https://doi.org/10.1007/s40799-016-0129-2.10.1007/s40799-016-0129-2 ↗
90. Becker AT, Chumbley LS, Goettee D, Russell AM. Neutron diffraction analysis of residual stresses near unannealed welds in anhydrous ammonia nurse tanks. J Agric Saf Health. 2014;20(1):3–13. https://doi.org/10.13031/jash.20.9858.10.13031/jash.20.9858 ↗
91. Yang ZB, Zhang YQ, Zhang SY, Hu JC, Li KQ, Zhao B. Residual stresses in ultrasonic-assisted laser sintered grinding diamond materials. Strength Mater. 2019;51:593–600. https://doi.org/10.1007/s11223-019-00105-5.10.1007/s11223-019-00105-5 ↗
92. Ghanbari S, Bahr DF. An energy-based nanoindentation method to assess localized residual stresses and mechanical properties on shot-peened materials. J Mater Res. 2019;34:1121–9. https://doi.org/10.1557/jmr.2019.41.10.1557/jmr.2019.41 ↗
93. Hu XY, Liu DL. (2019). Simulation of residual stress measuring process in a fiber material cylinder using slitting method. IOP Conference Series: Materials Science and Engineering, 490, 022082. https://doi.org/10.1088/1757-899X/490/2/02208210.1088/1757-899X/490/2/022082 ↗
94. Bounezour H, Laouar L, Bourbia M, Ouzine B. Effects of work hardening on mechanical metal properties—experimental analysis and simulation by experiments. Int J Adv Manuf Technol. 2019;101:2475–85. https://doi.org/10.1007/s00170-018-3071-x.10.1007/s00170-018-3071-x ↗
95. Ba QN, Song RB, Zhou NP, Pei ZZ, Feng YF, Song RF. Revealing working hardening behavior and substructure evolutions of ultrahigh strength and enhanced wear resistance Fe–25Mn–7Al–1 C steel treated by explosion processing. J Mater Sci. 2020;55:1256–68. https://doi.org/10.1007/s10853-019-04021-6.10.1007/s10853-019-04021-6 ↗
96. Mieszala M, Lozano Torrubia P, Axinte DA, Schwiedrzik JJ, Guo Y, Mischler S, Michler J, Philippe L. Erosion mechanisms during abrasive waterjet machining: Model microstructures and single particle experiments. J Mater Process Technol. 2017;247:92–102. https://doi.org/10.1016/j.jmatprotec.2017.04.003.10.1016/j.jmatprotec.2017.04.003 ↗
97. Ramakrishnan S. Investigating the effects of abrasive water jet machining parameters on surface integrity, chemical state in machining of Ti-6Al-4V. Mater Today Commun. 2022;31:103480. https://doi.org/10.1016/j.mtcomm.2022.103480.10.1016/j.mtcomm.2022.103480 ↗
98. Azhari A, Schindler C, Godard C, Gibmeier J, Kerscher E. Effect of multiple passes treatment in waterjet peening on fatigue performance. Appl Surf Sci. 2016;388(Part A):468–74. https://doi.org/10.1016/j.apsusc.2015.11.195.10.1016/j.apsusc.2015.11.195 ↗
99. Alberdi A, Rivero A, Artaza T, Lamikiz A. Analysis of Alloy 718 surfaces milled by abrasive waterjet and post-processed by plain waterjet technology. Procedia Manuf. 2017;13:679–86. https://doi.org/10.1016/j.promfg.2017.09.163.10.1016/j.promfg.2017.09.163 ↗
100. Huang L, Kinnell P, Shipway PH. Parametric Effects on Grit Embedment and Surface Morphology in an Innovative Hybrid Waterjet Cleaning Process for Alpha Case Removal from Titanium Alloys. Procedia CIRP. 2013;6:594–9. https://doi.org/10.1016/j.procir.2013.03.077.10.1016/j.procir.2013.03.077 ↗