Improving the hydro-bulging formability of anisotropic aluminum alloy tubes by the flow forming process
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Microstructure and mechanical properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Zhang K, He Z, Zheng K, Yuan S. Experimental verification of anisotropic constitutive models under tension-tension and tension-compression stress states. Int J Mech Sci. 2020;178:105618. https://doi.org/10.1016/j.ijmecsci.2020.105618.10.1016/j.ijmecsci.2020.105618 ↗
2. Jin H, Lloyd DJ. The reduction of planar anisotropy by texture modification through asymmetric rolling and annealing in AA5754. Mater Sci Eng A. 2005;399:358–67. https://doi.org/10.1016/j.msea.2005.04.027.10.1016/j.msea.2005.04.027 ↗
3. Zhu L, Li K, Yang X, He J, Fang J, Zhang Z, et al. Tailoring the formability and planar anisotropy of Al-Mg-Si-Cu-Zn alloys via cross hot rolling and two-stage cold rolling. J Alloys Compd. 2024;985:174089. https://doi.org/10.1016/j.jallcom.2024.174089.10.1016/j.jallcom.2024.174089 ↗
4. Khalfallah A, Oliveira MC, Alves JL, Zribi T, Belhadjsalah H, Menezes LF. Mechanical characterization and constitutive parameter identification of anisotropic tubular materials for hydroforming applications. Int J Mech Sci. 2015;104:91–103. https://doi.org/10.1016/j.ijmecsci.2015.09.017.10.1016/j.ijmecsci.2015.09.017 ↗
5. Jiang L, He Y, Lin Y, Zhang S, Feng Y, Sun M, et al. Influence of process parameters on thinning ratio and fittability of bellows hydroforming. Int J Adv Manuf Technol. 2020;107:3371–87. https://doi.org/10.1007/s00170-020-05170-8.10.1007/s00170-020-05170-8 ↗
6. Wang Q, Chu G, Sun L, Ling C, Liu X. Numerical and experimental study on axial hydroforging process of 5A03 aluminium alloy S-shaped bellows. Int J Adv Manuf Technol. 2023;127:4413–28. https://doi.org/10.1007/s00170-023-11816-0.10.1007/s00170-023-11816-0 ↗
7. Zhu S, Wang K, Wang Y, Shen R, Liu G, Yuan S. Spinning process of 2219 aluminum alloy tubes for used in hydroforming. Int J Adv Manuf Technol. 2024;130:5479–91. https://doi.org/10.1007/s00170-024-13070-4.10.1007/s00170-024-13070-4 ↗
8. Li F, Chen X, Ding L, Wang C, Zhang K, Weng Y, et al. Influence of different rolling processes on microstructure, texture and anisotropy of the Al–Cu–Li alloy. J Mater Res Technol. 2025;34:2580–92. https://doi.org/10.1016/j.jmrt.2024.12.247.10.1016/j.jmrt.2024.12.247 ↗
9. Pitkin N, Uzun U, Knezevic M. Improving r-value of AA6016 sheets by cyclic-bending-under-tension and heat-treating processes. J Manuf Process. 2025;154:623–39. https://doi.org/10.1016/j.jmapro.2025.10.004.10.1016/j.jmapro.2025.10.004 ↗
10. Kazemi-Navaee A, Jamaati R, Jamshidi Aval H. Effect of single roll drive rolling on microstructure, texture, and mechanical property anisotropy of Al−5.6Zn−2.5Mg−1.4Cu aluminum alloy. Trans Nonferrous Met Soc China. 2023;33:3266–81. https://doi.org/10.1016/S1003-6326(23)66332-0.10.1016/S1003-6326(23)66332-0 ↗
11. Sidor J, Petrov RH, Kestens LAI. Deformation, recrystallization and plastic anisotropy of asymmetrically rolled aluminum sheets. Mater Sci Eng A-Struct Mater Prop Microstruct Process. 2010;528:413–24. https://doi.org/10.1016/j.msea.2010.09.023.10.1016/j.msea.2010.09.023 ↗
12. Fan X, Li Y, Xu C, Wang B, Peng R, Chen J. Improved mechanical anisotropy and texture optimization of a 3xx aluminum alloy by differential temperature rolling. Mater Sci Eng A Struct Mater Prop Microstruct Process. 2021;799:140278. https://doi.org/10.1016/j.msea.2020.140278.10.1016/j.msea.2020.140278 ↗
13. Huang J, Jiang Y, Jiang F, Xu C. The improved mechanical anisotropy of a commercial Al–Cu–Mg–Mn–Si (2017) aluminum alloy by cross rolling. Adv Eng Mater. 2022;24:2100831. https://doi.org/10.1002/adem.202100831.10.1002/adem.202100831 ↗
14. Nayan N, Mishra S, Prakash A, Murty SVSN, Prasad MJNV, Samajdar I. Effect of cross-rolling on microstructure and texture evolution and tensile behavior of aluminium-copper-lithium (AA2195) alloy. Mater Sci Eng A Struct Mater Prop Microstruct Process. 2019;740:252–61. https://doi.org/10.1016/j.msea.2018.10.089.10.1016/j.msea.2018.10.089 ↗
15. Huh MY, Cho SY, Engler O. Randomization of the annealing texture in aluminum 5182 sheet by cross-rolling. Mater Sci Eng A Struct Mater Prop Microstruct Process. 2001;315:35–46. https://doi.org/10.1016/S0921-5093(01)01207-2.10.1016/S0921-5093(01)01207-2 ↗
16. Di B, Liu H, Dhawan S, Wang K, Liu X, Politis DJ. Mechanics-based failure model of tube hydro-bulging test. Front Mech Eng. 2022;8:908375. https://doi.org/10.3389/fmech.2022.908375.10.3389/fmech.2022.908375 ↗
17. Abdolvand H, Faraji G, Karami JS, Baniasadi M. Microstructure and mechanical properties of fine-grained thin-walled AZ91 tubes processed by a novel combined SPD process. Bull Mater Sci. 2017;40:1471–9. https://doi.org/10.1007/s12034-017-1508-8.10.1007/s12034-017-1508-8 ↗
18. Abdolvand H, Ensafi M, Faraji G. Formability behavior of the ultrafine grained thin-walled tubes during square-sectional hydroforming process. Trans Indian Inst Met. 2023;76:2783–90. https://doi.org/10.1007/s12666-023-02969-3.10.1007/s12666-023-02969-3 ↗
19. Pang Q, Hu ZL, Pan X, Zuo XQ. Deformation characterization of friction-stir-welded tubes by hydraulic bulge testing. JOM. 2014;66:2137–44. https://doi.org/10.1007/s11837-014-1135-4.10.1007/s11837-014-1135-4 ↗
20. Yuan SJ, Hu ZL, Wang XS. Evaluation of formability and material characteristics of aluminum alloy friction stir welded tube produced by a novel process. Mater Sci Eng A Struct Mater Prop Microstruct Process. 2012;543:210–6. https://doi.org/10.1016/j.msea.2012.02.076.10.1016/j.msea.2012.02.076 ↗
21. Hui J, Liu W, Wang B. Quasi -gradient variation of microstructures and properties of Cu-Sn alloy along the thickness direction under cold spinning. J Alloys Compd. 2020. https://doi.org/10.1016/j.jallcom.2020.154701.10.1016/j.jallcom.2020.154701 ↗
22. Dai G, Xue M, Guo Y, Sun Z, Chang H, Lu J, et al. Gradient microstructure and strength-ductility synergy improvement of 2319 aluminum alloys by hybrid additive manufacturing. J Alloys Compd. 2023;968:171781. https://doi.org/10.1016/j.jallcom.2023.171781.10.1016/j.jallcom.2023.171781 ↗
23. Qiang W, Wu Q, Long L. Gradient structured Al alloy with a synergistic improvement of strength-ductility obtained by friction stir processing. Mater Sci Eng A Struct Mater Prop Microstruct Process. 2024;916:147376. https://doi.org/10.1016/j.msea.2024.147376.10.1016/j.msea.2024.147376 ↗
24. Ghorbani H, Jamaati R. Breakthrough the strength-ductility trade-off in AA7075 alloy by gradient microstructure. Arch Civ Mech Eng. 2023;23:245. https://doi.org/10.1007/s43452-023-00785-6.10.1007/s43452-023-00785-6 ↗
25. Sun L, Li X, Li C, Gong Y, Fu Z, Yang J, et al. Investigation of mechanical properties and microstructural evolution in pure copper with dual heterostructures produced by surface mechanical attrition treatment. Metals. 2024;14:1217. https://doi.org/10.3390/met14111217.10.3390/met14111217 ↗
26. Ghosh S, Bibhanshu N, Suwas S, Chatterjee K. Surface mechanical attrition treatment of additively manufactured 316L stainless steel yields gradient nanostructure with superior strength and ductility. Mater Sci Eng A Struct Mater Prop Microstruct Process. 2021;820:141540. https://doi.org/10.1016/j.msea.2021.141540.10.1016/j.msea.2021.141540 ↗
27. Tian Y, Cao S, Ma W, Chen F, Lu S. Investigating microstructural characterization and tribological properties of AZ91D magnesium alloy reinforced with gradient nano-heterostructures through ultrasonic shot peening and laser melting process. Tribol Int. 2026;213:111103. https://doi.org/10.1016/j.triboint.2025.111103.10.1016/j.triboint.2025.111103 ↗
28. Kalpakjian S, Rajagopal S. Spinning of tubes: a review. J Appl Metalwork. 1982;2:211–23. https://doi.org/10.1007/BF02834039.10.1007/BF02834039 ↗
29. Tsivoulas D, da Fonseca JQ, Tuffs M, Preuss M. Measurement and modelling of textures in flow formed Cr-Mo-V steel tubes. Mater Sci Eng A Struct Mater Prop Microstruct Process. 2017;685:7–18. https://doi.org/10.1016/j.msea.2016.12.115.10.1016/j.msea.2016.12.115 ↗
30. Cai Y, Wang X. Mechanical properties and microstructure evolution of aluminum alloy tubes with normal gradient grains under biaxial stress. Int J Adv Manuf Technol. 2022;119:4803–11. https://doi.org/10.1007/s00170-021-08412-5.10.1007/s00170-021-08412-5 ↗
31. Cheng H, Sun L, Song H, Liu Y, Xiao X, Zhang Y, et al. The gradient nanotwin structures in a high-Mn steel prepared by power spinning. J Manuf Process. 2024;127:388–96. https://doi.org/10.1016/j.jmapro.2024.08.008.10.1016/j.jmapro.2024.08.008 ↗
32. Cui X-L, Sun Q, Wang Y, Yuan S. Measurement and calculation method for circumferential plastic strain ratio of anisotropic aluminum alloy tubes. Int J Solids Struct. 2025;313:113311. https://doi.org/10.1016/j.ijsolstr.2025.113311.10.1016/j.ijsolstr.2025.113311 ↗
33. Liu B, Zheng F, Chen H, Wang W, Nie H, Gong P. Research on forming properties of 7075 aluminum alloy tubes by power staggered spinning. Appl Phys A Mater Sci Process. 2023;129:841. https://doi.org/10.1007/s00339-023-07113-y.10.1007/s00339-023-07113-y ↗
34. Zeng X, Fan XG, Li HW, Zhan M, Li SH, Wu KQ, et al. Heterogeneous microstructure and mechanical property of thin-walled tubular part with cross inner ribs produced by flow forming. Mater Sci Eng A. 2020;790:139702. https://doi.org/10.1016/j.msea.2020.139702.10.1016/j.msea.2020.139702 ↗
35. Zhang Z, Zheng W, Su M, Ren Y, Wang X, Zheng B, et al. Grain size, precipitated phases, and texture dependence on the hoop mechanical properties of GH4169 thin-walled tubes. J Alloys Compd. 2025;1046:184824. https://doi.org/10.1016/j.jallcom.2025.184824.10.1016/j.jallcom.2025.184824 ↗
36. Su M, Zhou M, Zhang Z, Zhou L, Wang B. Effect of solid-solution treatment temperature on the microstructure and ring hoop mechanical property of GH4169 thin-walled seamless tubes for aerospace application. Mater Charact. 2025;228:115377. https://doi.org/10.1016/j.matchar.2025.115377.10.1016/j.matchar.2025.115377 ↗
37. Wu H, Xu W, Shan D, Jin BC. Mechanism of increasing spinnability by multi-pass spinning forming—analysis of damage evolution using a modified GTN model. Int J Mech Sci. 2019;159:1–19. https://doi.org/10.1016/j.ijmecsci.2019.05.030.10.1016/j.ijmecsci.2019.05.030 ↗
38. Vural H, Fenercioğlu TO, Yalçinkaya T. Ductile fracture prediction for flow forming of Inconel 718 with experimental validation and finite element simulations. Eng Fract Mech. 2026;333:111787. https://doi.org/10.1016/j.engfracmech.2025.111787.10.1016/j.engfracmech.2025.111787 ↗
39. Cui XL, Yuan SJ. Determination of mechanical properties of anisotropic thin-walled tubes under three-dimensional stress state. Int J Adv Manuf Technol. 2016;87:1917–27. https://doi.org/10.1007/s00170-016-8526-3.10.1007/s00170-016-8526-3 ↗
40. Cui X-L, Yang Z-P, Wang X-S. Characterization of multiaxial stress-strain response of tube metal from double-sided hydro-bulging test based on Hosford’s 1979 yield criterion. JOM. 2017;69:930–6. https://doi.org/10.1007/s11837-017-2260-7.10.1007/s11837-017-2260-7 ↗
41. He Z, Yuan S, Lin Y, Wang X, Hu W. Analytical model for tube hydro-bulging test, part I: models for stress components and bulging zone profile. Int J Mech Sci. 2014;87:297–306. https://doi.org/10.1016/j.ijmecsci.2014.05.009.10.1016/j.ijmecsci.2014.05.009 ↗
42. He Z, Yuan S, Lin Y, Wang X, Hu W. Analytical model for tube hydro-bulging tests, part II: linear model for pole thickness and its application. Int J Mech Sci. 2014;87:307–15. https://doi.org/10.1016/j.ijmecsci.2014.05.010.10.1016/j.ijmecsci.2014.05.010 ↗