journal article·2026-03-16

Effect of rolling temperature and initial thickness-to-diameter ratio on deformation behavior and interfacial bonding of 304 stainless steel/Q235 carbon steel bimetallic shafts via cross-wedge rolling

Le Zhu, Jin Zhou, Qiang Zhou, Jiapeng Wang, Haojie Zhang, Baoyu Wang

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Yan M, Sun J, Huang H, et al. Effect of hot rolling and cooling process on microstructure and properties of 2205/Q235 clad plate. J Iron Steel Res Int. 2018;25:1113–22. https://doi.org/10.1007/s42243-018-0172-6.10.1007/s42243-018-0172-6 ↗
2. Li H, Zhang Q, Yu M. Interface structure change and carbon diffusion of stainless steel-carbon steel-laminated composite under high-temperature condition. J Materi Eng Perform. 2023. https://doi.org/10.1007/s11665-023-08829-x.10.1007/s11665-023-08829-x ↗
3. Zhang BY, Liu BX, He JN, et al. Microstructure and mechanical properties of SUS304/Q235 multilayer steels fabricated by roll bonding and annealing. Mater Sci Eng A. 2019. https://doi.org/10.1016/j.msea.2018.10.054.10.1016/j.msea.2018.10.054 ↗
4. Kim JS, Lee KS, Kwon YN, et al. Improvement of interfacial bonding strength in roll-bonded Mg/Al clad sheets through annealing and secondary rolling process. Mater Sci Eng A. 2015;628:1–10. https://doi.org/10.1016/j.msea.2015.01.035.10.1016/j.msea.2015.01.035 ↗
5. Tao Y, Yuan J, Xiao L, et al. Microstructures and properties of roll-bonded stainless /medium carbon steel clad plates. J Mater Process Tech. 2019;266:264–73. https://doi.org/10.1016/j.jmatprotec.2018.06.007.10.1016/j.jmatprotec.2018.06.007 ↗
6. Ossenkemper S, Dahnke C, Tekkaya AE. Analytical and experimental bond strength investigation of cold forged bimetal shafts. Mater Process Tech. 2019;264:190–9. https://doi.org/10.1016/j.jmatprotec.2018.09.008.10.1016/j.jmatprotec.2018.09.008 ↗
7. Li Z, Chen L, Que B, et al. Effects of artificial aging on precipitation behavior, mechanical properties and corrosion resistance of Si3N4/6061Al composite fabricated by sintering and hot extrusion processes. J Mater Process Technol. 2022;306:117644. https://doi.org/10.1016/j.jmatprotec.2022.117644.10.1016/j.jmatprotec.2022.117644 ↗
8. Zhou Q, Liu R, Ran C, et al. Effect of microstructure on mechanical properties of titanium-steel explosive welding interface. Mater Sci Eng A. 2022;830:142260. https://doi.org/10.1016/j.msea.2021.142260.10.1016/j.msea.2021.142260 ↗
9. Zhao H, Sheng L. Microstructure and mechanical properties of the Ag/316L composite plate fabricated by explosive welding. J Manuf Process. 2021;64:265–75. https://doi.org/10.1016/j.jmapro.2021.01.026.10.1016/j.jmapro.2021.01.026 ↗
10. Meng Y, Zhang H, Lin B, et al. Microstructure and mechanical properties of the AZ31/GW103K bimetal composite rods fabricated by co-extrusion. Mater Sci Eng A. 2022;833:142578. https://doi.org/10.1016/j.msea.2021.142578.10.1016/j.msea.2021.142578 ↗
11. Priel E, Ungarish Z, Navi NU. Co-extrusion of a Mg/Al composite billet: a computational study validated by experiments. J Mater Process Technol. 2016;236:103–13. https://doi.org/10.1016/j.jmatprotec.2016.05.007.10.1016/j.jmatprotec.2016.05.007 ↗
12. Zhao Z, Tang J, Tariq, et al. Effect of rolling temperature on microstructure and mechanical properties of Ti/steel clad plates fabricated by cold spraying and hot-rolling. Mater Sci Eng A. 2020;795:139982. https://doi.org/10.1016/j.msea.2020.139982.10.1016/j.msea.2020.139982 ↗
13. Wang T, Wang Y, Bian L, et al. Microstructural evolution and mechanical behavior of Mg/Al laminated composite sheet by novel corrugated rolling and flat rolling. Mater Sci Eng A. 2019;765:138318. https://doi.org/10.1016/j.msea.2019.138318.10.1016/j.msea.2019.138318 ↗
14. Xu W, Zhang Z, Huang K, et al. Effect of heat treatment and initial thickness ratio on spin bonding of 3A21/5A03 composite tube. J Mater Process Technol. 2017;247:143–57. https://doi.org/10.1016/j.jmatprotec.2017.04.014.10.1016/j.jmatprotec.2017.04.014 ↗
15. Tomczak J, Bulzak T, Pater Z, et al. Skew rolling of bimetallic rods. Materials. 2020;14(1):18. https://doi.org/10.3390/ma14010018.10.3390/ma14010018 ↗
16. Ji C, Niu H, Li Z, et al. Deformation law and bonding mechanism of 45 carbon steel/316L stainless steel cladding tubes fabricated by three-roll skew rolling bonding process. J Mater Process Technol. 2024;325:118277. https://doi.org/10.1016/j.jmatprotec.2023.118277.10.1016/j.jmatprotec.2023.118277 ↗
17. Pater Z, Tomczak J, Bulzak T, et al. Analysis of the use of variable angular parameter tools in cross-wedge rolling. J Manuf Process. 2022;83:768–86. https://doi.org/10.1016/j.jmapro.2022.09.052.10.1016/j.jmapro.2022.09.052 ↗
18. Urankar S, Lovell M, Morrow C, et al. Establishment of failure conditions for the cross-wedge rolling of hollow shafts. J Mater Process Technol. 2006;177:545–9. https://doi.org/10.1016/j.jmatprotec.2006.04.052.10.1016/j.jmatprotec.2006.04.052 ↗
19. Yu Z, Peng W, Zhang X, et al. Evolution of microstructure of aluminum alloy hollow shaft in cross wedge rolling without mandrel. J Cent South Univ. 2022;29:807–20. https://doi.org/10.1007/s11771-022-4950-8.10.1007/s11771-022-4950-8 ↗
20. Shi J, Liu J, Wang B, et al. Numerical and experimental research on warm cross wedge rolling of hollow shafts with corrugated surface. Int J Adv Manuf Technol. 2022;122:243–62. https://doi.org/10.1007/s00170-022-09379-7.10.1007/s00170-022-09379-7 ↗
21. Hu Z, Wang B, Zheng Z. Research and industrialization of near-net rolling technology used in shaft parts. Front Mech Eng. 2018;13:17–24. https://doi.org/10.1007/s11465-018-0480-3.10.1007/s11465-018-0480-3 ↗
22. Xia Y, Shu X, Zhu D, et al. Effect of process parameters on microscopic uniformity of cross wedge rolling of GH4169 alloy shaft. J Manuf Process. 2021;66:145–52. https://doi.org/10.1016/j.jmapro.2021.03.063.10.1016/j.jmapro.2021.03.063 ↗
23. Ji H, Liu J, Wang B, et al. Cross-wedge rolling of a 4Cr9Si2 hollow valve: explorative experiment and finite element simulation. Int J Adv Manuf Technol. 2015;77:15–26. https://doi.org/10.1007/s00170-014-6363-9.10.1007/s00170-014-6363-9 ↗
24. Yang C, Ma J, Hu Z. Analysis and design of cross wedge rolling hollow axle sleeve with mandrel. J Mater Process Technol. 2017;239:346–58. https://doi.org/10.1016/j.jmatprotec.2016.09.002.10.1016/j.jmatprotec.2016.09.002 ↗
25. Bulzak T, Pater Z, Tomczak J, et al. Hot and warm cross-wedge rolling of ball pins – comparative analysis.[J]. Manuf Process. 2020;50:90–101. https://doi.org/10.1016/j.jmapro.2019.12.001.10.1016/j.jmapro.2019.12.001 ↗
26. Huo Y, Bai Q, Wang B, et al. A new application of unified constitutive equations for cross wedge rolling of a high-speed railway axle steel. J Mater Process Technol. 2015;223:274–83. https://doi.org/10.1016/j.jmatprotec.2015.04.011.10.1016/j.jmatprotec.2015.04.011 ↗
27. Lin LF, Peng WF, Titov V, et al. Interface phenomena and bonding mechanism in the new method of cross wedge rolling bimetallic shaft. J Mater Res Technol. 2023;24:1132–49. https://doi.org/10.1016/j.jmrt.2023.03.049.10.1016/j.jmrt.2023.03.049 ↗
28. Peng WF, Zhang JH, Huang GX, et al. Stress distributions during the cross-wedge rolling of composite 42CrMo/Q235 laminated shafts. Int J Adv Manuf Technol. 2016;83:145–55. https://doi.org/10.1007/s00170-015-7541-0.10.1007/s00170-015-7541-0 ↗
29. Li J, Lu J, Wang A, et al. Forming characteristics of bi-metallic composite shafts by cross-wedge rolling. J Iron Steel Res Int. 2025. https://doi.org/10.1007/s42243-025-01493-6.10.1007/s42243-025-01493-6 ↗