journal article·2026-02-24

Exploring the impact of computationally generated auxetic metamaterials in additive manufacturing: a systematic review of design, materials and applications

Madhanagopal Manoharan, Kaliaraj Gobi Saravanan, T. Sasipraba, Senthilkumaran Kumaraguru, Jinoop Arackal Narayanan

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Cellular and Composite Structures · Topology Optimization in Engineering · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Subeshan B, Hamzat AK, Asmatulu E. (2025) Fabricating Three-Dimensional metamaterials using additive manufacturing: an overview. J Manuf Mater Process 9.10.3390/jmmp9100343 ↗
2. Kazim M, Pal A, Goswami D. (2025) Mechanical metamaterials for bioengineering: in Vitro, Wearable, and implantable applications. Adv Eng Mater 27.10.1002/adem.202401806 ↗
3. Scopus. database, https www.scopus.com (Accessed on 30/08/2025).
4. Carneiro VH, Rawson SD, Puga H, Withers PJ. Macro-, meso- and microstructural characterization of metallic lattice structures manufactured by additive manufacturing assisted investment casting. Sci Rep. 2021;11:1–12. https://doi.org/10.1038/s41598-021-84524-y.10.1038/s41598-021-84524-y ↗
5. Li T, Chen Y, Hu X, et al. Exploiting negative poisson’s ratio to design 3D-printed composites with enhanced mechanical properties. Mater Des. 2018;142:247–58. https://doi.org/10.1016/j.matdes.2018.01.034.10.1016/j.matdes.2018.01.034 ↗
6. Photiou D, Avraam S, Sillani F, et al. Experimental and numerical analysis of 3d printed polymer tetra-petal auxetic structures under compression. Appl Sci (Switzerland). 2021;11. https://doi.org/10.3390/app112110362.10.3390/app112110362 ↗
7. Bhat C, Kumar A, Lin S-C, Jeng J-Y. Adaptive mechanical properties and stretchability of novel chainmail fabrics based on overlapping tessellation strategies. Addit Manuf. 2023;76:103777. https://doi.org/10.1016/j.addma.2023.103777.10.1016/j.addma.2023.103777 ↗
8. Li D, Yin J, Dong L, Lakes RS. Strong re-entrant cellular structures with negative poisson’s ratio. J Mater Sci. 2018;53:3493–9. https://doi.org/10.1007/s10853-017-1809-8.10.1007/s10853-017-1809-8 ↗
9. Karlsson P, Pejryd L, Str N. (2021) Industrializing Additive Manufacturing. Industrializing Additive Manufacturing. https://doi.org/10.1007/978-3-030-54334-110.1007/978-3-030-54334-1 ↗
10. Zhu L, Sun L, Wang X, Li N. Optimisation of three-dimensional hierarchical structures with tailored lattice metamaterial anisotropy. Mater Des. 2021;210:110083. https://doi.org/10.1016/j.matdes.2021.110083.10.1016/j.matdes.2021.110083 ↗
11. Mir M, Ali MN, Sami J, Ansari U. Review of mechanics and applications of auxetic structures. Adv Mater Sci Eng. 2014;2014:1–17. https://doi.org/10.1155/2014/753496.10.1155/2014/753496 ↗
12. Qin R, Liu X, Wang X, et al. Mechanical behavior and energy absorption of expansion circular tube with negative poisson’s ratio. Alexandria Eng J. 2024;109:638–54. https://doi.org/10.1016/j.aej.2024.09.080.10.1016/j.aej.2024.09.080 ↗
13. Truong D, Van, Nguyễn H, Fangueiro R, et al. Auxetic materials and structures in the automotive industry: applications and insights. J Reinf Plast Compos. 2025. https://doi.org/10.1177/07316844251334174.10.1177/07316844251334174 ↗
14. Lee D, Chen W, Wang L et al. (2024) Data-Driven design for metamaterials and multiscale systems: A review. Adv Mater 36.10.1002/adma.202305254 ↗
15. Geers MGD, Kouznetsova VG, Brekelmans WAM. Multi-scale computational homogenization: trends and challenges. J Comput Appl Math. 2010;234:2175–82. https://doi.org/10.1016/j.cam.2009.08.077.10.1016/j.cam.2009.08.077 ↗
16. Luo J, Li Y, Zhou W, et al. Multi-scale topology optimization of multi-material heterogeneous microstructures based on deep learning. J Comput Des Eng. 2025;12:127–53. https://doi.org/10.1093/jcde/qwaf064.10.1093/jcde/qwaf064 ↗
17. Wang Q, Li C, Zhang M, et al. A machine learning-aided robust topology optimization method for the design of auxetic metamaterials. Comput Methods Appl Mech Eng. 2026;449. https://doi.org/10.1016/j.cma.2025.118577.10.1016/j.cma.2025.118577 ↗
18. Wilt JK, Yang C, Gu GX. Accelerating auxetic metamaterial design with deep learning. Adv Eng Mater. 2020;22. https://doi.org/10.1002/adem.201901266.10.1002/adem.201901266 ↗
19. Zhang C, Zhao YF. A hybrid deep learning approach for the design of 2D auxetic metamaterials. Comput Methods Appl Mech Eng. 2025;441. https://doi.org/10.1016/j.cma.2025.117972.10.1016/j.cma.2025.117972 ↗
20. Stollberg J, Gangwar T, Weeger O, Schillinger D. Multiscale topology optimization of functionally graded lattice structures based on physics-augmented neural network material models. Comput Methods Appl Mech Eng. 2025;438. https://doi.org/10.1016/j.cma.2025.117808.10.1016/j.cma.2025.117808 ↗
21. Rajendran S, Palani G, Kanakaraj A et al. (2023) Metal and polymer based composites manufactured using additive Manufacturing—A brief review. Polym (Basel) 15.10.3390/polym15112564 ↗
22. Nam R, Nam D, Naguib HE. Additive manufactured 3D re-entrant auxetic structures for enhanced impact resistance. Smart Mater Struct. 2024;33. https://doi.org/10.1088/1361-665X/ad8cb4.10.1088/1361-665X/ad8cb4 ↗
23. Stratis A, Papantoniou I, Vosniakos G-C. On the deformation and energy absorption under tension and compression of an auxetic structure made by SLA resin. ICEAF VIII. Basel Switzerland: MDPI; 2025. p. 6.10.3390/engproc2025119006 ↗
24. Maran S, Masters IG, Gibbons GJ. Additive manufacture of 3d auxetic structures by laser powder bed fusion—design influence on manufacturing accuracy and mechanical properties. Appl Sci (Switzerland). 2020;10. https://doi.org/10.3390/app10217738.10.3390/app10217738 ↗
25. Meng Z, Xu Y, Xie J, et al. Unraveling the reinforcing mechanisms for cementitious composites with 3D printed multidirectional auxetic lattices using X-ray computed tomography. Mater Des. 2024;246. https://doi.org/10.1016/j.matdes.2024.113331.10.1016/j.matdes.2024.113331 ↗
26. Momoh EO, Jayasinghe A, Hajsadeghi M et al. (2024) A state-of-the-art review on the application of auxetic materials in cementitious composites. Thin-Walled Struct 196.10.1016/j.tws.2023.111447 ↗
27. Zhang Y, Jiang WZ, Pan Y et al. (2024) Temperature-responsive metamaterials made of highly sensitive thermostat metal strips.10.1126/sciadv.ads0892 ↗
28. Červinek O, Tucker MR, Koutný D, Bambach M. Computational and experimental investigation of thermally auxetic multi-metal lattice structures produced by laser powder bed fusion. Virtual Phys Prototyp. 2024;19. https://doi.org/10.1080/17452759.2024.2396069.10.1080/17452759.2024.2396069 ↗
29. Zhang Y, Jiang WZ, Jiang W et al. (2025) Recent advances of auxetic metamaterials in smart materials and structural systems. Adv Funct Mater 35.10.1002/adfm.202421746 ↗
30. Benedetti M, du Plessis A, Ritchie RO, et al. Architected cellular materials: A review on their mechanical properties towards fatigue-tolerant design and fabrication. Mater Sci Eng R: Rep. 2021;144:100606. https://doi.org/10.1016/j.mser.2021.100606.10.1016/j.mser.2021.100606 ↗
31. Khosravani MR, Anders D, Ayatollahi MR, Reinicke T. Fabrication of mechanical metamaterials by 3D printing: recent advancements and current challenges. Archives Civil Mech Eng. 2025;25. https://doi.org/10.1007/s43452-025-01290-8.10.1007/s43452-025-01290-8 ↗
32. Momoh EO, Jayasinghe A, Hajsadeghi M, et al. A state-of-the-art review on the application of auxetic materials in cementitious composites. Thin-Walled Struct. 2024;196:111447. https://doi.org/10.1016/j.tws.2023.111447.10.1016/j.tws.2023.111447 ↗
33. Gibson LJ, Ashby MF. Cellular solids: structure and properties. 2nd ed. Cambridge University Press; 1997.10.1017/CBO9781139878326 ↗
34. Maskery I, Sturm L, Aremu AO, et al. Insights into the mechanical properties of several triply periodic minimal surface lattice structures made by polymer additive manufacturing. Polym (Guildf). 2018;152:62–71. https://doi.org/10.1016/j.polymer.2017.11.049.10.1016/j.polymer.2017.11.049 ↗
35. Distefano F, Pasta S, Epasto G. Titanium lattice structures produced via additive manufacturing for a bone scaffold: A review. J Funct Biomater. 2023;14. https://doi.org/10.3390/jfb14030125.10.3390/jfb14030125 ↗
36. Zheng X, Lee H, Weisgraber TH et al. (2014) Ultralight, ultrastiff mechanical metamaterials. Science (1979) 344:1373–1377. https://doi.org/10.1126/science.125229110.1126/science.1252291 ↗
37. Wang J, Panesar A. Machine learning based lattice generation method derived from topology optimisation. Addit Manuf. 2022;60:103238. https://doi.org/10.1016/j.addma.2022.103238.10.1016/j.addma.2022.103238 ↗
38. Pais A, Alves JL, Jorge RN, Belinha J. Multiscale homogenization techniques for TPMS foam material for biomedical structural applications. Bioengineering. 2023;10:1–21. https://doi.org/10.3390/bioengineering10050515.10.3390/bioengineering10050515 ↗
39. Abou-Ali AM, Lee DW, Abu Al-Rub RK. On the effect of lattice topology on mechanical properties of SLS additively manufactured Sheet-, Ligament-, and Strut-Based polymeric metamaterials. Polym (Basel). 2022;14. https://doi.org/10.3390/polym14214583.10.3390/polym14214583 ↗
40. Majdak M, Baranowski P, Małachowski J. Numerical studies of the energy absorption capacities and deformation mechanisms of 2D cellular topologies. Archives Civil Mech Eng. 2024;24:1–21. https://doi.org/10.1007/s43452-024-00926-5.10.1007/s43452-024-00926-5 ↗
41. Shi D, Wang Z, Li Y, et al. A novel re-entrant circular star-shaped auxetic honeycomb with enhanced energy absorption and anisotropic poisson’s ratio. Mater Des. 2025;257:114465. https://doi.org/10.1016/j.matdes.2025.114465.10.1016/j.matdes.2025.114465 ↗
42. Xu Y, Li Z, Zhang S, et al. Parametric design and additively manufactured hybrid gradient porous scaffolds: mechanical properties, shape memory and permeability. Archives Civil Mech Eng. 2025;25:254. https://doi.org/10.1007/s43452-025-01303-6.10.1007/s43452-025-01303-6 ↗
43. Janpheng T. (2025) Optimizing computational E ciency in TPMS structural design through surrogate modeling optimizing computational efficiency in TPMS structural design through surrogate modeling. 0–21.10.21203/rs.3.rs-6210868/v1 ↗
44. Pugliese R, Graziosi S. Biomimetic scaffolds using triply periodic minimal surface-based porous structures for biomedical applications. SLAS Technol. 2023;28:165–82. https://doi.org/10.1016/j.slast.2023.04.004.10.1016/j.slast.2023.04.004 ↗
45. Li N, Wang M, Zhao J, et al. Heat transfer characterization of TPMS heat exchangers applied to the aerospace field. Front Heat Mass Transf. 2025;23:601–14. https://doi.org/10.32604/fhmt.2025.061192.10.32604/fhmt.2025.061192 ↗
46. Lyu Y, Gong T, He T, et al, et al. Study on the energy absorption performance of triply periodic minimal surface (TPMS) structures at different Load-Bearing angles. Biomimetics. 2024;9. https://doi.org/10.3390/biomimetics9070392.10.3390/biomimetics9070392 ↗
47. Sengul M, Tasdemir HA, Tamer A. (2025) Real-world applications of auxetic structures in engineering: A review. Structures 80.10.1016/j.istruc.2025.109673 ↗
48. Chen X, Liu C, Wadsworth M, et al. Surface engineering of auxetic scaffolds for neural and vascular differentiation from human pluripotent stem cells. Adv Healthc Mater. 2023;12. https://doi.org/10.1002/adhm.202202511.10.1002/adhm.202202511 ↗
49. Kahlert S, Nossol C, Krüger M, et al. Dynamic mechanical load as a trigger for growth and proliferation in Porcine epithelial cells. Biomolecules. 2025;15. https://doi.org/10.3390/biom15030455.10.3390/biom15030455 ↗
50. Kumar A, Kargozar S, Baino F, Han SS. (2019) Additive Manufacturing Methods for Producing Hydroxyapatite and Hydroxyapatite-Based Composite Scaffolds: A Review. Front Mater 6.10.3389/fmats.2019.00313 ↗
51. Yarali E, Zadpoor AA, Staufer U, et al. Auxeticity as a Mechanobiological tool to create Meta-Biomaterials. ACS Appl Bio Mater. 2023;6:2562–75.10.1021/acsabm.3c00145 ↗
52. Kim Y, Son K, Lee J. (2021) Auxetic structures for tissue engineering scaffolds and biomedical devices. Materials 14.10.3390/ma14226821 ↗
53. Wang P, Sun Y, Shi X, et al. Bioscaffolds embedded with regulatory modules for cell growth and tissue formation: A review. Bioact Mater. 2021;6:1283–307.
54. El-Galy IM, Saleh BI, Ahmed MH. Functionally graded materials classifications and development trends from industrial point of view. SN Appl Sci. 2019;1:1–23. https://doi.org/10.1007/s42452-019-1413-4.10.1007/s42452-019-1413-4 ↗
55. Chen D, Zheng X. Multi-material additive manufacturing of metamaterials with Giant, tailorable negative poisson’s ratios. Sci Rep. 2018;8:1–8. https://doi.org/10.1038/s41598-018-26980-7.10.1038/s41598-018-26980-7 ↗
56. Bhat C, Prajapati MJ, Kumar A, Jeng JY. Additive Manufacturing-Enabled advanced design and process strategies for Multi-Functional lattice structures. Materials. 2024;17. https://doi.org/10.3390/ma17143398.10.3390/ma17143398 ↗
57. Daynes S, Feih S. Functionally graded lattice structures with tailored stiffness and energy absorption. Int J Mech Sci. 2025;285:109861. https://doi.org/10.1016/j.ijmecsci.2024.109861.10.1016/j.ijmecsci.2024.109861 ↗
58. Grima G, Sleem K, Virgili G et al. (2025) Metallic mechanical metamaterials produced by LPBF for energy absorption systems. Met (Basel) 15.10.3390/met15121315 ↗
59. Khosravani MR, Bieler S, Weinberg K, Reinicke T. Mechanical fracture of lattice structures fabricated by selective laser sintering. Archives Civil Mech Eng. 2025;25:1–12. https://doi.org/10.1007/s43452-025-01149-y.10.1007/s43452-025-01149-y ↗
60. Kang D, Park S, Son Y, et al. Multi-lattice inner structures for high-strength and light-weight in metal selective laser melting process. Mater Des. 2019;175:107786. https://doi.org/10.1016/j.matdes.2019.107786.10.1016/j.matdes.2019.107786 ↗
61. Wang M, Pau A, Lepidi M. (2023) Design of mechanical metamaterials based on biphasic periodic microstructures. 947–55. https://doi.org/10.7712/150123.9846.44146910.7712/150123.9846.441469 ↗
62. Wang M, Pau A, Lepidi M. Elastoacoustic wave propagation in a biphasic mechanical metamaterial. J Acoust Soc Am. 2024;155:3322–35. https://doi.org/10.1121/10.0026079.10.1121/10.0026079 ↗
63. Mohammadzadeh R, Vahedi M, Ghosh A, et al. Role of martensite decomposition for achieving bi-lamellar microstructure in 3D printed Ti-6Al-4V. Archives Civil Mech Eng. 2025;25:146. https://doi.org/10.1007/s43452-025-01186-7.10.1007/s43452-025-01186-7 ↗
64. Callens SJP, Arns CH, Kuliesh A, Zadpoor AA. Decoupling minimal surface metamaterial properties through Multi-Material hyperbolic tilings. Adv Funct Mater. 2021;31:1–25. https://doi.org/10.1002/adfm.202101373.10.1002/adfm.202101373 ↗
65. Callens SJP, Arns CH, Kuliesh A, Zadpoor AA. Decoupling minimal surface metamaterial properties through Multi-Material hyperbolic tilings. Adv Funct Mater. 2021;31. https://doi.org/10.1002/adfm.202101373.10.1002/adfm.202101373 ↗
66. Oliveira G, Almeida L, Sousa JP, et al. A rule based procedural content generation system. Commun Comput Inform Sci. 2022;1754 CCIS:107–13. https://doi.org/10.1007/978-3-031-23236-7_8.10.1007/978-3-031-23236-7_8 ↗
67. On CK, Foong NW, Teo J, et al. Rule-based procedural generation of item in Role-Playing game. Int J Adv Sci Eng Inf Technol. 2017;7:1735–41. https://doi.org/10.18517/ijaseit.7.5.1739.10.18517/ijaseit.7.5.1739 ↗
68. Kopowski J, Mreła A, Mikołajewski D, Rojek I. Enhancing 3D printing with procedural generation and STL formatting using python. Appl Sci (Switzerland). 2024;14. https://doi.org/10.3390/app14167299.10.3390/app14167299 ↗
69. Woodward IR, Fromen CA. Scalable, process-oriented beam lattices: Generation, characterization, and compensation for open cellular structures. Addit Manuf. 2021;48:102386. https://doi.org/10.1016/j.addma.2021.102386.10.1016/j.addma.2021.102386 ↗
70. Woodward IR, Fromen CA. Scalable, process-oriented beam lattices: Generation, characterization, and compensation for open cellular structures. Addit Manuf. 2021;48:102386. https://doi.org/10.1016/j.addma.2021.102386.10.1016/j.addma.2021.102386 ↗
71. Arvizu Alonso AK, Armendáriz Mireles EN, Calles Arriaga CA, Rocha Rangel E. Control of the properties of the Voronoi tessellation technique and biomimetic patterns: A review. Designs (Basel). 2024;8. https://doi.org/10.3390/designs8050093.10.3390/designs8050093 ↗
72. Li Z, Chu S, Wu Z. A novel bio-inspired design method for porous structures: Variable-periodic Voronoi tessellation. Mater Des. 2024;243:113055. https://doi.org/10.1016/j.matdes.2024.113055.10.1016/j.matdes.2024.113055 ↗
73. Chen L, Pan Y, Chu X, et al. Multiscale design and experimental verification of Voronoi graded stochastic lattice structures for the natural frequency maximization problem. Acta Mech Sinica/Lixue Xuebao. 2023;39. https://doi.org/10.1007/s10409-023-22445-x.10.1007/s10409-023-22445-x ↗
74. Wu C, Luo J, Zhong J, et al. Topology optimisation for design and additive manufacturing of functionally graded lattice structures using derivative-aware machine learning algorithms. Addit Manuf. 2023;78:103833. https://doi.org/10.1016/j.addma.2023.103833.10.1016/j.addma.2023.103833 ↗
75. Wang W, Feng D, Yang L, et al. Topology optimization of self-supporting lattice structure. Addit Manuf. 2023;67:103507. https://doi.org/10.1016/j.addma.2023.103507.10.1016/j.addma.2023.103507 ↗
76. Munk DJ. A bidirectional evolutionary structural optimization algorithm for mass minimization with multiple structural constraints. Int J Numer Methods Eng. 2019;118:93–120. https://doi.org/10.1002/nme.6005.10.1002/nme.6005 ↗
77. Qi X, Chen G, Li Y, et al. Applying Neural-Network-Based machine learning to additive manufacturing: current Applications, Challenges, and future perspectives. Engineering. 2019;5:721–9. https://doi.org/10.1016/j.eng.2019.04.012.10.1016/j.eng.2019.04.012 ↗
78. Kansara H, Liu M, He Y, Tan W. Inverse design and additive manufacturing of shape-morphing structures based on functionally graded composites. J Mech Phys Solids. 2023;180:105382. https://doi.org/10.1016/j.jmps.2023.105382.10.1016/j.jmps.2023.105382 ↗
79. Liu Q, Chen W, Yakubov V, et al. Interpretable machine learning approach for exploring process-structure-property relationships in metal additive manufacturing. Addit Manuf. 2024;85. https://doi.org/10.1016/j.addma.2024.104187.10.1016/j.addma.2024.104187 ↗
80. Garg A, Sharma A, Zheng W, Li L. (2025) A review on artificial intelligence-enabled mechanical analysis of 3D printed and FEM-modelled auxetic metamaterials. Virtual Phys Prototyp 20.10.1080/17452759.2024.2445712 ↗
81. Echeta I, Dutton B, Leach RK, Piano S. Finite element modelling of defects in additively manufactured strut-based lattice structures. Addit Manuf. 2021;47:102301. https://doi.org/10.1016/j.addma.2021.102301.10.1016/j.addma.2021.102301 ↗
82. Sadeghi F, Baniassadi M, Shahidi A, Baghani M. TPMS metamaterial structures based on shape memory polymers: Mechanical, thermal and thermomechanical assessment. J Mater Res Technol. 2023;23:3726–43. https://doi.org/10.1016/j.jmrt.2023.02.014.10.1016/j.jmrt.2023.02.014 ↗
83. Fernandes RR, Tamijani AY. Design optimization of lattice structures with stress constraints. Mater Des. 2021;210:110026. https://doi.org/10.1016/j.matdes.2021.110026.10.1016/j.matdes.2021.110026 ↗
84. Top N, Şahin İ, Gökçe H. The mechanical properties of functionally graded lattice structures derived using Computer-Aided design for additive manufacturing. Appl Sci (Switzerland). 2023;13. https://doi.org/10.3390/app132111667.10.3390/app132111667 ↗
85. Su J, Mo Y, Leong Sing S. (2025) Generative artificial intelligence in lattice structure design for additive manufacturing: A critical review Engineering Science in Additive Manufacturing. 1:1. https://doi.org/10.36922/ESAM02511000610.36922/ESAM025110006 ↗
86. Lee S, Zhang Z, Gu GX. Generative machine learning algorithm for lattice structures with superior mechanical properties. Mater Horiz. 2022;9:952–60. https://doi.org/10.1039/d1mh01792f.10.1039/d1mh01792f ↗
87. Jadhav Y, Berthel J, Hu C, et al. Generative lattice units with 3D diffusion for inverse design: GLU3D. Adv Funct Mater. 2024;34:1–15. https://doi.org/10.1002/adfm.202404165.10.1002/adfm.202404165 ↗
88. Ramezani M, Mohd Ripin Z. 4D printing in biomedical engineering: Advancements, Challenges, and future directions. J Funct Biomater. 2023;14. https://doi.org/10.3390/jfb14070347.10.3390/jfb14070347 ↗
89. Mirzaali MJ, Pahlavani H, Yarali E, Zadpoor AA. Non-affinity in multi-material mechanical metamaterials. Sci Rep. 2020;10:1–11. https://doi.org/10.1038/s41598-020-67984-6.10.1038/s41598-020-67984-6 ↗
90. Doodi R, Gunji BM. Prediction and experimental validation approach to improve performance of novel hybrid bio-inspired 3D printed lattice structures using artificial neural networks. Sci Rep. 2023;13:1–17. https://doi.org/10.1038/s41598-023-33935-0.10.1038/s41598-023-33935-0 ↗
91. Sun T, Chen B, Yue D, Li D. Design and strengthening of dual bio-inspired lattice structures based on additive manufacturing. Alexandria Eng J. 2025;113:573–83. https://doi.org/10.1016/j.aej.2024.11.088.10.1016/j.aej.2024.11.088 ↗
92. Kalogeropoulou M, Díaz-Payno PJ, Mirzaali MJ, et al. 4D printed shape-shifting biomaterials for tissue engineering and regenerative medicine applications. Biofabrication. 2024;16. https://doi.org/10.1088/1758-5090/ad1e6f.10.1088/1758-5090/ad1e6f ↗
93. Li H, Bartolo PJDS, Zhou K. Direct 4D printing of hydrogels driven by structural topology. Virtual Phys Prototyp. 2025;20:1–11. https://doi.org/10.1080/17452759.2025.2462962.10.1080/17452759.2025.2462962 ↗
94. Feng P, Yang F, Jia J, et al. Mechanism and manufacturing of 4D printing: derived and beyond the combination of 3D printing and shape memory material. Int J Extreme Manuf. 2024;6. https://doi.org/10.1088/2631-7990/ad7e5f.10.1088/2631-7990/ad7e5f ↗
95. Callens SJP, Zadpoor AA. From flat sheets to curved geometries: Origami and Kirigami approaches. Mater Today. 2018;21:241–64. https://doi.org/10.1016/j.mattod.2017.10.004.10.1016/j.mattod.2017.10.004 ↗
96. Kelkar PU, Kim HS, Cho KH, et al. Cellular auxetic structures for mechanical metamaterials: A review. Sens (Switzerland). 2020;20:1–26. https://doi.org/10.3390/s20113132.10.3390/s20113132 ↗
97. Cobian L, Maire E, Adrien J, et al. Effect of sample dimensions on the stiffness of PA12 lattice materials fabricated using powder bed fusion. Addit Manuf. 2024;93:104382. https://doi.org/10.1016/j.addma.2024.104382.10.1016/j.addma.2024.104382 ↗
98. DeStefano V, Khan S, Tabada A. Applications of PLA in modern medicine. Eng Regeneration. 2020;1:76–87. https://doi.org/10.1016/j.engreg.2020.08.002.10.1016/j.engreg.2020.08.002 ↗
99. Bottini L, Boschetto A, Veniali F, Gaudenzi P. Additive manufacturing for CubeSat structure fabrication. Next generation cubesats and smallsats. Elsevier; 2023. pp. 153–80.10.1016/B978-0-12-824541-5.00025-X ↗
100. McDonnell B, Errico V, Posa P, et al. Bi-metallic lattice structures manufactured via an intralayer multi-material powder bed fusion method. Addit Manuf. 2024;89:104301. https://doi.org/10.1016/j.addma.2024.104301.10.1016/j.addma.2024.104301 ↗