journal article·2026-02-22

A multi-scale investigation of cement-based and alkali-activated ultra-high-performance concrete: from ambient and high-temperature performance to microstructural and environmental analysis

Yunfeng Qian, Dingyi Yang, Zhenxiang Jie, Kailu Yang, Guosheng Ren

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Concrete and Cement Materials Research · Fire effects on concrete materials · Smart Materials for Construction

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Chi K, Li J, Shao R, Wu C. Experimental study on dynamic characterisation of ultra-high performance concrete (UHPC) after cryogenic freeze-thaw cycles. Cem Concr Compos. 2025;160:106011. https://doi.org/10.1016/j.cemconcomp.2025.106011.10.1016/j.cemconcomp.2025.106011 ↗
2. Du J, Meng W, Khayat KH, Bao Y, Guo P, Lyu Z, et al. New development of ultra-high-performance concrete (UHPC). Compos B Eng. 2021;224:109220. https://doi.org/10.1016/j.compositesb.2021.109220.10.1016/j.compositesb.2021.109220 ↗
3. Habert G, Arribe D, Dehove T, Espinasse L, Le Roy R. Reducing environmental impact by increasing the strength of concrete: quantification of the improvement to concrete bridges. J Clean Prod. 2012;35:250–62. https://doi.org/10.1016/j.jclepro.2012.05.028.10.1016/j.jclepro.2012.05.028 ↗
4. Huang W, Kazemi-Kamyab H, Sun W, Scrivener K. Effect of cement substitution by limestone on the hydration and microstructural development of ultra-high performance concrete (UHPC). Cem Concr Compos. 2017;77:86–101. https://doi.org/10.1016/j.cemconcomp.2016.12.009.10.1016/j.cemconcomp.2016.12.009 ↗
5. Fan D, Lu J, Liu K, Ban J, Yu R, Poon CS. Multi-scale design of ultra-high performance concrete (UHPC) composites with centroplasm theory. Compos B Eng. 2024;281:111562. https://doi.org/10.1016/j.compositesb.2024.111562.10.1016/j.compositesb.2024.111562 ↗
6. Cimesa M, Moustafa MA. UHPC modulus of elasticity: assessment and new developments using companion materials and structural data. Eng Struct. 2024;310:118146. https://doi.org/10.1016/j.engstruct.2024.118146.10.1016/j.engstruct.2024.118146 ↗
7. Bajaber MA, Hakeem IY. UHPC evolution, development, and utilization in construction: a review. J Mater Res Technol. 2021;10:1058–74. https://doi.org/10.1016/j.jmrt.2020.12.051.10.1016/j.jmrt.2020.12.051 ↗
8. Zhou X, Yu F, Ashour A, Yang W, Luo Y, Han B. A review on the potential application of ultra-high performance concrete in offshore wind towers: insights into material properties, mechanisms, and models. Thin-Walled Struct. 2025;207:112717. https://doi.org/10.1016/j.tws.2024.112717.10.1016/j.tws.2024.112717 ↗
9. Liu J, Du L, Yao Y, Beaucour A, Wang J, Zhao X. A close look at fire-induced explosive spalling of ultra-high performance concrete: from materials to structures. Arch Civ Mech Eng. 2024;24:124. https://doi.org/10.1007/s43452-024-00942-5.10.1007/s43452-024-00942-5 ↗
10. Su X, Ren Z, Li P. Review on physical and chemical activation strategies for ultra-high performance concrete (UHPC). Cem Concr Compos. 2024;149:105519. https://doi.org/10.1016/j.cemconcomp.2024.105519.10.1016/j.cemconcomp.2024.105519 ↗
11. Song J, Banthia N, Yoo D. Effect of supplementary cementitious materials on durability of ultra-high-performance concrete: a review. Cem Concr Compos. 2025;163:106198. https://doi.org/10.1016/j.cemconcomp.2025.106198.10.1016/j.cemconcomp.2025.106198 ↗
12. Liu J, Farzadnia N, Shi C. Microstructural and micromechanical characteristics of ultra-high performance concrete with superabsorbent polymer (SAP). Cem Concr Res. 2021;149:106560. https://doi.org/10.1016/j.cemconres.2021.106560.10.1016/j.cemconres.2021.106560 ↗
13. Akeed MH, Qaidi S, Ahmed HU, Faraj RH, Mohammed AS, Emad W, et al. Ultra-high-performance fiber-reinforced concrete. Part II: hydration and microstructure. Case Stud Constr Mater. 2022;17:e01289. https://doi.org/10.1016/j.cscm.2022.e01289.10.1016/j.cscm.2022.e01289 ↗
14. Li H, Deng Q, Zhang J, Xia B, Skitmore M. Assessing the life cycle CO2 emissions of reinforced concrete structures: four cases from China. J Clean Prod. 2019;210:1496–506. https://doi.org/10.1016/j.jclepro.2018.11.102.10.1016/j.jclepro.2018.11.102 ↗
15. Tahwia AM, Ellatief MA, Heneigel AM, Elrahman MA. Characteristics of eco-friendly ultra-high-performance geopolymer concrete incorporating waste materials. Ceram Int. 2022;48:19662–74. https://doi.org/10.1016/j.ceramint.2022.03.103.10.1016/j.ceramint.2022.03.103 ↗
16. Zhou S, Jia W, Diao H, Geng X, Wu Y, Wang M, et al. A CycleGAN-Pix2pix framework for multi-objective 3D urban morphology optimization: enhancing thermal performance in high-density areas. Sustain Cities Soc. 2025;126:106400. https://doi.org/10.1016/j.scs.2025.106400.10.1016/j.scs.2025.106400 ↗
17. Qian Y, Yang D, Zhao J, Mao X, Ren G, Cao Z. Development of cementless alkali-activated ultra-high performance concrete under various steam curing regimes: mechanical properties, permeability, and microstructure. J Build Eng. 2025;101:111857. https://doi.org/10.1016/j.jobe.2025.111857.10.1016/j.jobe.2025.111857 ↗
18. Yoo D, Banthia N, You I, Lee S. Recent advances in cementless ultra-high-performance concrete using alkali-activated materials and industrial byproducts: A review. Cem Concr Compos. 2024;148:105470. https://doi.org/10.1016/j.cemconcomp.2024.105470.10.1016/j.cemconcomp.2024.105470 ↗
19. Dong E, Yu R, Fan D, Chen Z, Ma X. Absorption-desorption process of internal curing water in ultra-high performance concrete (UHPC) incorporating pumice: from relaxation theory to dynamic migration model. Cem Concr Compos. 2022;133:104659. https://doi.org/10.1016/j.cemconcomp.2022.104659.10.1016/j.cemconcomp.2022.104659 ↗
20. Okoye FN, Prakash S, Singh NB. Durability of fly Ash based geopolymer concrete in the presence of silica fume. J Clean Prod. 2017;149:1062–7. https://doi.org/10.1016/j.jclepro.2017.02.176.10.1016/j.jclepro.2017.02.176 ↗
21. Tu W, Zhang M. Multiscale microstructure and micromechanical properties of alkali-activated concrete: a critical review. Cem Concr Compos. 2024;152:105664. https://doi.org/10.1016/j.cemconcomp.2024.105664.10.1016/j.cemconcomp.2024.105664 ↗
22. Zhou S, Xu X, Xu H, Zhao Z, Yuan H, Wang Y, et al. From heat resilience to sustainable co-benefits: adaptive urban morphology generation based on multimodal data fusion and a novel generative framework. Sustain Cities Soc. 2025;127:106452. https://doi.org/10.1016/j.scs.2025.106452.10.1016/j.scs.2025.106452 ↗
23. Galli L, Suraneni P. Durability and damage resistance of sustainable Portland limestone cement-based (ultra) high-performance concrete in seawater. Mater Struct. 2025;58:310. https://doi.org/10.1617/s11527-025-02824-5.10.1617/s11527-025-02824-5 ↗
24. Shah HA, Du J, Meng W. Low-carbon UHPC with carbonated blast furnace slag: impact of mineral composition, carbonation degree, and CaCO3 polymorphs. Cem Concr Compos. 2025;160:106039. https://doi.org/10.1016/j.cemconcomp.2025.106039.10.1016/j.cemconcomp.2025.106039 ↗
25. Abdellatief M, Murali G, Dixit S. Leveraging machine learning to evaluate the effect of Raw materials on the compressive strength of ultra-high-performance concrete. Results Eng. 2025;25:104542. https://doi.org/10.1016/j.rineng.2025.104542.10.1016/j.rineng.2025.104542 ↗
26. Kumar R, Rai B, Samui P. Prediction of mechanical properties of high-performance concrete and ultrahigh‐performance concrete using soft computing techniques: a critical review. Struct Concr. 2025;26:1309–37. https://doi.org/10.1002/suco.202400188.10.1002/suco.202400188 ↗
27. Leng J, Yang J, Zhang Z, Du J, Zou Y, Zhou J. Effect of vehicle-induced vibration on the strength, nano-mechanical properties, and microstructural characteristics of ultra-high-performance concrete during hardening process. Cem Concr Compos. 2024;148:105487. https://doi.org/10.1016/j.cemconcomp.2024.105487.10.1016/j.cemconcomp.2024.105487 ↗
28. Shi Y, Long G, Zen X, Xie Y, Shang T. Design of binder system of eco-efficient UHPC based on physical packing and chemical effect optimization. Constr Build Mater. 2021;274:121382. https://doi.org/10.1016/j.conbuildmat.2020.121382.10.1016/j.conbuildmat.2020.121382 ↗
29. Song F, Li Q, Xu S. Interfacial behaviour of bonding between ultra-high performance concrete and concrete substrate: evolution of microstructure and micromechanical properties. Compos B Eng. 2025;299:112445. https://doi.org/10.1016/j.compositesb.2025.112445.10.1016/j.compositesb.2025.112445 ↗
30. Lee SW, Kim GW, Oh T, You I, Wang X, Yoo D. The microstructure and mechanical properties of cementless ultra-high-performance alkali activated concrete considering geometrical properties of steel fiber. Cem Concr Compos. 2023;142:105209. https://doi.org/10.1016/j.cemconcomp.2023.105209.10.1016/j.cemconcomp.2023.105209 ↗
31. Pu B, Liu B, Li L, Jiang L, Zhou J, Ding P. Using rice husk Ash in alkali-activated ultra-high-performance concrete: Flowability, early age strength and elasticity modulus. Constr Build Mater. 2024;443:137771. https://doi.org/10.1016/j.conbuildmat.2024.137771.10.1016/j.conbuildmat.2024.137771 ↗
32. Zhang XY, Yu R, Zhang JJ, Shui ZH. A low-carbon alkali activated slag based ultra-high performance concrete (UHPC): reaction kinetics and microstructure development. J Clean Prod. 2022;363:132416. https://doi.org/10.1016/j.jclepro.2022.132416.10.1016/j.jclepro.2022.132416 ↗
33. Zhang T, Zhang M, Shen Y, Zhu H, Yan Z. Mitigating the damage of ultra-high performance concrete at elevated temperatures using synergistic flame-retardant polymer fibres. Cem Concr Res. 2022;158:106835. https://doi.org/10.1016/j.cemconres.2022.106835.10.1016/j.cemconres.2022.106835 ↗
34. Zhao X, Lu J, Tian W, Cyr M, Tagnit-Hamou A, Poon CS. Self-healing performance of thermally damaged ultra-high performance concrete: rehydration and recovery mechanism. Cem Concr Res. 2025;191:107825. https://doi.org/10.1016/j.cemconres.2025.107825.10.1016/j.cemconres.2025.107825 ↗
35. Ashkezari GD, Razmara M. Thermal and mechanical evaluation of ultra-high performance fiber-reinforced concrete and conventional concrete subjected to high temperatures. J Build Eng. 2020;32:101621. https://doi.org/10.1016/j.jobe.2020.101621.10.1016/j.jobe.2020.101621 ↗
36. Ren G, Gao X, Zhang H. Utilization of hybrid Sisal and steel fibers to improve elevated temperature resistance of ultra-high performance concrete. Cem Concr Compos. 2022;130:104555. https://doi.org/10.1016/j.cemconcomp.2022.104555.10.1016/j.cemconcomp.2022.104555 ↗
37. Park SM, Jang JG, Lee NK, Lee HK. Physicochemical properties of binder gel in alkali-activated fly ash/slag exposed to high temperatures. Cem Concr Res. 2016;89:72–9. https://doi.org/10.1016/j.cemconres.2016.08.004.10.1016/j.cemconres.2016.08.004 ↗
38. Fu Q, Bu M, Zhang Z, Xu W, Yuan Q, Niu D. Hydration characteristics and microstructure of Alkali-Activated slag concrete: a review. Engineering. 2023;20:162–79. https://doi.org/10.1016/j.eng.2021.07.026.10.1016/j.eng.2021.07.026 ↗
39. Rahmati M, Toufigh V. Evaluation of geopolymer concrete at high temperatures: an experimental study using machine learning. J Clean Prod. 2022;372:133608. https://doi.org/10.1016/j.jclepro.2022.133608.10.1016/j.jclepro.2022.133608 ↗
40. Bayrak B, Alcan HG, Durmaz ÖÇÖ, ipek S, Kaplan G, Güneyisi E, et al. Studying the Metakaolin content, fiber type, and high-temperature effects on the physico-mechanical properties of fly ash-based geopolymer composites. Arch Civ Mech Eng. 2025;25:2. https://doi.org/10.1007/s43452-024-01071-9.10.1007/s43452-024-01071-9 ↗
41. Cai R, Ye H. Clinkerless ultra-high strength concrete based on alkali-activated slag at high temperatures. Cem Concr Res. 2021;145:106465. https://doi.org/10.1016/j.cemconres.2021.106465.10.1016/j.cemconres.2021.106465 ↗
42. Huang L, Liu J, Cai R, Ye H. Mechanical degradation of ultra-high strength alkali-activated concrete subjected to repeated loading and elevated temperatures. Cem Concr Compos. 2021;121:104083. https://doi.org/10.1016/j.cemconcomp.2021.104083.10.1016/j.cemconcomp.2021.104083 ↗
43. Yang Y, Huang L, Xu L, Yu M, Ye H, Chi Y. Temperature-dependent compressive stress-strain behaviors of alkali-activated slag-based ultra-high strength concrete. Constr Build Mater. 2022;357:129250. https://doi.org/10.1016/j.conbuildmat.2022.129250.10.1016/j.conbuildmat.2022.129250 ↗
44. Fan J, Shao Y, Bandelt MJ, Adams MP, Ostertag CP. Sustainable reinforced concrete design: the role of ultra-high performance concrete (UHPC) in life-cycle structural performance and environmental impacts. Eng Struct. 2024;316:118585. https://doi.org/10.1016/j.engstruct.2024.118585.10.1016/j.engstruct.2024.118585 ↗
45. Jamil S, Idrees M, Akbar A, Barbhuiya S. Optimizing concrete properties with carbonated recycled concrete aggregate: a sustainable approach. Arch Civ Mech Eng. 2025;25:266. https://doi.org/10.1007/s43452-025-01319-y.10.1007/s43452-025-01319-y ↗
46. Khan MI, Abbas YM, Abellan-Garcia J, Castro-Cabeza A. Eco-efficient ultra-high-performance concrete formulation utilizing electric Arc furnace slag and recycled glass powder-advanced analytics and lifecycle perspectives. J Mater Res Technol. 2024;32:362–77. https://doi.org/10.1016/j.jmrt.2024.07.171.10.1016/j.jmrt.2024.07.171 ↗
47. Swathi B, Vidjeapriya R. Influence of precursor materials and molar ratios on normal, high, and ultra-high performance geopolymer concrete—a state of Art review. Constr Build Mater. 2023;392:132006. https://doi.org/10.1016/j.conbuildmat.2023.132006.10.1016/j.conbuildmat.2023.132006 ↗
48. Zhou S, Diao H, Wang J, Jia W, Xu H, Xu X, et al. Multi-stage optimization framework for synergetic grey-green infrastructure in response to long-term climate variability based on shared socio-economic pathways. Water Res. 2025;274:123091. https://doi.org/10.1016/j.watres.2025.123091.10.1016/j.watres.2025.123091 ↗
49. Juenger MCG, Snellings R, Bernal SA. Supplementary cementitious materials: new sources, characterization, and performance insights. Cem Concr Res. 2019;122:257–73. https://doi.org/10.1016/j.cemconres.2019.05.008.10.1016/j.cemconres.2019.05.008 ↗
50. Alkhawaldeh AA, Judah HI, Shammout DZ, Almomani OA, Alkhawaldeh MA. Sustainability evaluation and life cycle assessment of concretes including pozzolanic by-products and alkali-activated binders. Results Eng. 2024;23:102569. https://doi.org/10.1016/j.rineng.2024.102569.10.1016/j.rineng.2024.102569 ↗
51. Robayo-Salazar R, Mejia-Arcila J, de Gutierrez RM, Martinez E. Life cycle assessment (LCA) of an alkali-activated binary concrete based on natural volcanic pozzolan: a comparative analysis to OPC concrete. Constr Build Mater. 2018;176:103–11. https://doi.org/10.1016/j.conbuildmat.2018.05.017.10.1016/j.conbuildmat.2018.05.017 ↗
52. Bianco I, Ap Dafydd Tomos B, Vinai R. Analysis of the environmental impacts of alkali-activated concrete produced with waste glass-derived silicate activator—a LCA study. J Clean Prod. 2021;316:128383. https://doi.org/10.1016/j.jclepro.2021.128383.10.1016/j.jclepro.2021.128383 ↗
53. Sengupta J, Dhang N, Deb A. Life cycle sustainability assessment of one-part alkali-activated concrete activated with industrial grade soda Ash and hydrated lime-a comparative study. Sustain Chem Pharm. 2025;48:102254. https://doi.org/10.1016/j.scp.2025.102254.10.1016/j.scp.2025.102254 ↗
54. Abdellatief M, Elrahman MA, Abadel AA, Wasim M, Tahwia A. Ultra-high performance concrete versus ultra-high performance geopolymer concrete: mechanical performance, microstructure, and ecological assessment. J Build Eng. 2023;79:107835. https://doi.org/10.1016/j.jobe.2023.107835.10.1016/j.jobe.2023.107835 ↗
55. Qian Y, Yang D, Yan Y, Ren G, Liu M. Synergistic effects of alkali content and silicate modulus optimization for enhanced properties in alkali-activated ultra-high performance concrete at ambient and high temperature. Case Stud Constr Mater. 2025;22:e4606. https://doi.org/10.1016/j.cscm.2025.e04606.10.1016/j.cscm.2025.e04606 ↗
56. Zheng Y, Cai J, Zhang L, Xiao Y. Bond behavior between geopolymer recycled brick aggregate concrete and steel bars after exposure to high temperatures. J Build Eng. 2024;97:110901. https://doi.org/10.1016/j.jobe.2024.110901.10.1016/j.jobe.2024.110901 ↗
57. Wang H, He J, Zhou M, Wei B, Wu C, Tang Z, et al. Fracture properties prediction of Ultra-High-Performance concrete (UHPC) after High-Temperature exposure based on Meso-Scale finite element analysis and artificial neural network. Theor Appl Fract Mech. 2025;139:105018. https://doi.org/10.1016/j.tafmec.2025.105018.10.1016/j.tafmec.2025.105018 ↗
58. Han Z, Miao J, Yu Y, Hou D, Liu C, Zhang X, et al. Non-explosive spalling Uhpc mediated by synergistic regulation of thermal stress and vapor pressure. Compos B Eng. 2025;305:112712. https://doi.org/10.1016/j.compositesb.2025.112712.10.1016/j.compositesb.2025.112712 ↗
59. Zhao Y, Yu X, Li X, Liu R, Chen D. Unveiling the self-healing behavior of marine exposed concrete: nondestructive ultrasonic detection and Vickers hardness characterization. Constr Build Mater. 2024;447:138072. https://doi.org/10.1016/j.conbuildmat.2024.138072.10.1016/j.conbuildmat.2024.138072 ↗
60. Li PP, Yu QL, Brouwers HJH, Chen W. Conceptual design and performance evaluation of two-stage ultra-low binder ultra-high performance concrete. Cem Concr Res. 2019;125:105858. https://doi.org/10.1016/j.cemconres.2019.105858.10.1016/j.cemconres.2019.105858 ↗
61. Yu R, Spiesz P, Brouwers HJH. Mix design and properties assessment of Ultra-High performance fibre reinforced concrete (UHPFRC). Cem Concr Res. 2014;56:29–39. https://doi.org/10.1016/j.cemconres.2013.11.002.10.1016/j.cemconres.2013.11.002 ↗
62. Qian Y, Yang D, Xia Y, Gao H, Ma Z. Properties and improvement of ultra-high performance concrete with coarse aggregates and polypropylene fibers after high-temperature damage. Constr Build Mater. 2023;364:129925. https://doi.org/10.1016/j.conbuildmat.2022.129925.10.1016/j.conbuildmat.2022.129925 ↗
63. Zhang P, Wittmann FH, Vogel M, Müller HS, Zhao T. Influence of freeze-thaw cycles on capillary absorption and chloride penetration into concrete. Cem Concr Res. 2017;100:60–7. https://doi.org/10.1016/j.cemconres.2017.05.018.10.1016/j.cemconres.2017.05.018 ↗
64. Liu Z, Chen B, Meng X. Factors influencing the mechanical strength of geopolymer-based ultra-high-performance concrete (G-UHPC): a systematic review from materials to processes. J Build Eng. 2025;111:113095. https://doi.org/10.1016/j.jobe.2025.113095.10.1016/j.jobe.2025.113095 ↗
65. Xia D, Song N, Li B, Zheng Y, Guo W, Wu J, et al. Understanding the synergetic effect of SAP and nano-silica on the mechanical properties, drying shrinkage and microstructures of alkali-activated slag/fly ash-based concrete. Constr Build Mater. 2024;455:139223. https://doi.org/10.1016/j.conbuildmat.2024.139223.10.1016/j.conbuildmat.2024.139223 ↗
66. Wang W, Zhang S, Zhang Y, Noguchi T, Maruyama I. Understanding the influence of slag fineness and water-to-binder ratio on the alkali-silica reaction in alkali-activated slag mortars. Cem Concr Compos. 2025;157:105907. https://doi.org/10.1016/j.cemconcomp.2024.105907.10.1016/j.cemconcomp.2024.105907 ↗
67. Ye H, Cartwright C, Rajabipour F, Radlinska A. Understanding the drying shrinkage performance of alkali-activated slag mortars. Cem Concr Compos. 2017;76:13–24. https://doi.org/10.1016/j.cemconcomp.2016.11.010.10.1016/j.cemconcomp.2016.11.010 ↗
68. Hu Z, Guo S, Zhu H, Xu J, Dai X, Chen Q, et al. Synergetic effect of C-S-H seeds and SAP on LC3 UHPC: microstructure evolution, compressive strength and autogenous shrinkage. J Clean Prod. 2025;502:145364. https://doi.org/10.1016/j.jclepro.2025.145364.10.1016/j.jclepro.2025.145364 ↗
69. Feng W, Li J, Guan J, Mai J, Yang F, Li S, et al. Strain-rate effect of mechanical properties on ultra high-performance concrete under impact loads: review and systematic analysis. Arch Civ Mech Eng. 2025;25:122. https://doi.org/10.1007/s43452-025-01178-7.10.1007/s43452-025-01178-7 ↗
70. Emminger YH, Ladner L, Ruiz-Agudo C. Comparative study of the early stages of crystallization of calcium silicate hydrate (C-S-H) and calcium aluminate silicate hydrate (C-A-S-H). Cem Concr Res. 2025;193:107873. https://doi.org/10.1016/j.cemconres.2025.107873.10.1016/j.cemconres.2025.107873 ↗
71. Rigo E, Gava GP, Felix EF, Borges PM, Possan E. Concrete with recycled aggregates from construction: properties, emissions and carbon capture assessment. Case Stud Constr Mater. 2025;23:e4983. https://doi.org/10.1016/j.cscm.2025.e04983.10.1016/j.cscm.2025.e04983 ↗
72. Ren Z, Dong W, Dong X. Analysis of fractal and erosion characteristics of aeolian sand concrete pore structure under capillary absorption. J Build Eng. 2025;104:112258. https://doi.org/10.1016/j.jobe.2025.112258.10.1016/j.jobe.2025.112258 ↗
73. Zheng Q, Li C, He B, Jiang Z. Revealing the effect of silica fume on the flexural behavior of ultra-high-performance fiber-reinforced concrete by acoustic emission technique. Cem Concr Compos. 2022;131:104563. https://doi.org/10.1016/j.cemconcomp.2022.104563.10.1016/j.cemconcomp.2022.104563 ↗
74. Fang G, Wang Q, Zhang M. In-situ X-ray tomographic imaging of microstructure evolution of fly Ash and slag particles in alkali-activated fly Ash-slag paste. Compos B Eng. 2021;224:109221. https://doi.org/10.1016/j.compositesb.2021.109221.10.1016/j.compositesb.2021.109221 ↗
75. Provis JL, Myers RJ, White CE, Rose V, van Deventer JSJ. X-ray microtomography shows pore structure and tortuosity in alkali-activated binders. Cem Concr Res. 2012;42:855–64. https://doi.org/10.1016/j.cemconres.2012.03.004.10.1016/j.cemconres.2012.03.004 ↗
76. Wu P, Dai K, Shi Y, Rong H, Zhang X. Effect of biomass Ash on hydration, properties and microstructure of ultra-high performance concrete. J Build Eng. 2025;104:112276. https://doi.org/10.1016/j.jobe.2025.112276.10.1016/j.jobe.2025.112276 ↗
77. Kim GW, Oh T, Lee SK, Banthia N, Yoo D. Development of Ca-rich slag-based ultra-high-performance fiber-reinforced geopolymer concrete (UHP-FRGC): effect of sand-to-binder ratio. Constr Build Mater. 2023;370:130630. https://doi.org/10.1016/j.conbuildmat.2023.130630.10.1016/j.conbuildmat.2023.130630 ↗
78. Zhang R, He H, Song Y, Zhi X, Fan F. Influence of mix proportioning parameters and curing regimes on the properties of ultra-high strength alkali-activated concrete. Constr Build Mater. 2023;393:132139. https://doi.org/10.1016/j.conbuildmat.2023.132139.10.1016/j.conbuildmat.2023.132139 ↗
79. Sun J, Sun M, Su A, Gao X. Influence of graphite tailings on the mechanical performance, of ultra-high performance concrete. Case Stud Constr Mater. 2025;22:e04246. https://doi.org/10.1016/j.cscm.2025.e04246.10.1016/j.cscm.2025.e04246 ↗
80. Shen J, Li Y, Lin H, Lv J, Feng S, Ci J. Early properties and chemical structure analysis of alkali-activated brick geopolymer with varied alkali dosage. J Build Eng. 2022;60:105186. https://doi.org/10.1016/j.jobe.2022.105186.10.1016/j.jobe.2022.105186 ↗
81. Li N, Farzadnia N, Shi C. Microstructural changes in alkali-activated slag mortars induced by accelerated carbonation. Cem Concr Res. 2017;100:214–26. https://doi.org/10.1016/j.cemconres.2017.07.008.10.1016/j.cemconres.2017.07.008 ↗
82. Guo K, Zhang G, Li Y, Yang J, Ding Q. The mechanism of curing regimes on the macroscopic properties and microstructure of ultra-high performance concrete with lightweight aggregates. J Build Eng. 2024;82. https://doi.org/10.1016/j.jobe.2023.108236.10.1016/j.jobe.2023.108236 ↗
83. Ma H, Fu C, Huang K, Dai E, Zhang S, Fang Y, et al. Study on the characteristics of alkali-activated fly ash-slag improved by cenosphere: hydration and drying shrinkage. Constr Build Mater. 2023;372:130822. https://doi.org/10.1016/j.conbuildmat.2023.130822.10.1016/j.conbuildmat.2023.130822 ↗
84. Ma H, Fu C, Wu J, Yuan X, Wu C, Feng J. Micro/meso scales characterization of alkali-activated fly ash-slag concrete under sustained high-temperatures with X-CT, MIP, and SEM tests. Mater Today Sustain. 2024;28:101036. https://doi.org/10.1016/j.mtsust.2024.101036.10.1016/j.mtsust.2024.101036 ↗
85. Trincal V, Benavent V, Lahalle H, Balsamo B, Samson G, Patapy C, et al. Effect of drying temperature on the properties of alkali-activated binders - Recommendations for sample preconditioning. Cem Concr Res. 2022;151:106617. https://doi.org/10.1016/j.cemconres.2021.106617.10.1016/j.cemconres.2021.106617 ↗
86. Peng G, Niu X, Shang Y, Zhang D, Chen X, Ding H. Combined curing as a novel approach to improve resistance of ultra-high performance concrete to explosive spalling under high temperature and its mechanical properties. Cem Concr Res. 2018;109:147–58. https://doi.org/10.1016/j.cemconres.2018.04.011.10.1016/j.cemconres.2018.04.011 ↗
87. Le QTN, Nguyen T, Tran TT. Compressive strength, abrasion resistance, and microstructure of alkali-activated slag mortar at elevated temperatures. Ceram Int. 2025;51:47323–36. https://doi.org/10.1016/j.ceramint.2025.07.434.10.1016/j.ceramint.2025.07.434 ↗
88. Zhang B, Lin X, Zhang YX, Zhang L. Microscale failure analysis of the ultra-high-performance polypropylene fibre reinforced concrete panel subjected to high thermal loading induced by fire exposure. Eng Struct. 2023;292:116518. https://doi.org/10.1016/j.engstruct.2023.116518.10.1016/j.engstruct.2023.116518 ↗
89. Liang X, Wu C, Yang Y, Li Z. Experimental study on ultra-high performance concrete with high fire resistance under simultaneous effect of elevated temperature and impact loading. Cem Concr Compos. 2019;98:29–38. https://doi.org/10.1016/j.cemconcomp.2019.01.017.10.1016/j.cemconcomp.2019.01.017 ↗
90. Natkunarajah K, Masilamani K, Maheswaran S, Lothenbach B, Amarasinghe DAS, Attygalle D. Analysis of the trend of pH changes of concrete pore solution during the hydration by various analytical methods. Cem Concr Res. 2022;156:106780. https://doi.org/10.1016/j.cemconres.2022.106780.10.1016/j.cemconres.2022.106780 ↗
91. Huang J, Li J, Shao R, Wu C. Effect of high temperature and cooling method on compression and fracture properties of geopolymer-based ultra-high performance concrete. J Build Eng. 2025;105:112433. https://doi.org/10.1016/j.jobe.2025.112433.10.1016/j.jobe.2025.112433 ↗
92. Rashad AM, Bai Y, Basheer PAM, Collier NC, Milestone NB. Chemical and mechanical stability of sodium sulfate activated slag after exposure to elevated temperature. Cem Concr Res. 2012;42:333–43. https://doi.org/10.1016/j.cemconres.2011.10.007.10.1016/j.cemconres.2011.10.007 ↗
93. Lu J, Shen P, Sun Y, Poon CS. Strategy for preventing explosive spalling and enhancing material efficiency of lightweight ultra high-performance concrete. Cem Concr Res. 2022;158:106842. https://doi.org/10.1016/j.cemconres.2022.106842.10.1016/j.cemconres.2022.106842 ↗
94. Suescum-Morales D, Rios JD, La Concha AM, Cifuentes H, Jimenez JR, Fernandez JM. Effect of moderate temperatures on compressive strength of ultra-high-performance concrete: A microstructural analysis. Cem Concr Res. 2021;140:106303. https://doi.org/10.1016/j.cemconres.2020.106303.10.1016/j.cemconres.2020.106303 ↗
95. Zhang HY, Qiu GH, Kodur V, Yuan ZS. Spalling behavior of metakaolin-fly Ash based geopolymer concrete under elevated temperature exposure. Cem Concr Compos. 2020;106:103483. https://doi.org/10.1016/j.cemconcomp.2019.103483.10.1016/j.cemconcomp.2019.103483 ↗
96. Zhao R, Sanjayan JG. Geopolymer and Portland cement concretes in simulated fire. Mag Concr Res. 2011;63:163–73. https://doi.org/10.1680/macr.9.00110.10.1680/macr.9.00110 ↗
97. Bangi MR, Horiguchi T. Pore pressure development in hybrid fibre-reinforced high strength concrete at elevated temperatures. Cem Concr Res. 2011;41:1150–6. https://doi.org/10.1016/j.cemconres.2011.07.001.10.1016/j.cemconres.2011.07.001 ↗
98. Liu P, Cui S, Li Z, Xu X, Guo C. Influence of surrounding rock temperature on mechanical property and pore structure of concrete for shotcrete use in a hot-dry environment of high-temperature geothermal tunnel. Constr Build Mater. 2019;207:329–37. https://doi.org/10.1016/j.conbuildmat.2019.02.125.10.1016/j.conbuildmat.2019.02.125 ↗
99. Saavedra WGV, de Gutierrez RM. Performance of geopolymer concrete composed of fly Ash after exposure to elevated temperatures. Constr Build Mater. 2017;154:229–35. https://doi.org/10.1016/j.conbuildmat.2017.07.208.10.1016/j.conbuildmat.2017.07.208 ↗
100. Turner LK, Collins FG. Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete. Constr Build Mater. 2013;43:125–30. https://doi.org/10.1016/j.conbuildmat.2013.01.023.10.1016/j.conbuildmat.2013.01.023 ↗