Suitability assessment of non-destructive testing for mechanical property estimation of concrete with wind turbine wastes
Source abstract
Abstract
Abstract The simultaneous use of Coarse Recycled Aggregate (CRA) and Raw-Crushed Wind-Turbine Blade (RCWTB) in concrete enables the recycling and revaluation of two wastes from wind-farm decommissioning. Verification of the validity of Non-Destructive Testing (NDT) for field control of the concrete mixes produced with these wastes is key to extending its possibilities of use, as is the application of NDT in concrete monitoring. This research evaluates the suitability of Ultrasonic Pulse Velocity (UPV) and rebound index to estimate the mechanical properties of concrete made with up to 100% CRA and 10% RCWTB. From an experimental approach, both NDT properties decreased when adding both wastes, although rebound index exhibited a higher experimental variability. These experimental results were subsequently analyzed through two statistical procedures. First, an analysis through response surface methodology was conducted, whose models revealed that the directions of maximum variation (gradients) for UPV, modulus of elasticity, compressive strength and tensile splitting strength were aligned, especially for high waste contents. Second, a regression analysis determined that only these three mechanical properties could be properly estimated using these NDT properties, since Poisson’s coefficient and flexural strength largely depended on the stitching of the cementitious matrix, influenced by the fibers from glass fiber-reinforced polymer contained in RCWTB. UPV was always the NDT property that yielded more accurate estimations, while rebound index only improved the estimation quality of compressive strength, although a reduction of its measured value is recommended to avoid strength overestimations. In general, non-linear multiple regression models provided accurate and reliable predictions.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fiber-reinforced polymer composites · Innovative concrete reinforcement materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Patil YR, Dakwale VA, Ralegaonkar RV. Recycling construction and demolition waste in the sector of construction. Adv Civil Eng. 2024;2024:6234010. https://doi.org/10.1155/2024/6234010.10.1155/2024/6234010 ↗
2. Agrela F, Sánchez De Juan M, Ayuso J, Geraldes VL, Jiménez JR. Limiting properties in the characterisation of mixed recycled aggregates for use in the manufacture of concrete. Constr Build Mater. 2011;25(10):3950–5. https://doi.org/10.1016/j.conbuildmat.2011.04.027.10.1016/j.conbuildmat.2011.04.027 ↗
3. Faleschini F, Jiménez C, Barra M, Aponte D, Vázquez E, Pellegrino C. Rheology of fresh concretes with recycled aggregates. Constr Build Mater. 2014;73:407–16. https://doi.org/10.1016/j.conbuildmat.2014.09.068.10.1016/j.conbuildmat.2014.09.068 ↗
4. Xu G, Zhang Z, Li J, Tian Q, Cai J, Guo S, et al. Design and preparation methods for high-performance recycled aggregate concrete: a review. Proc Inst Civ Eng Waste Resour Manag. 2024;178(1):1–19. https://doi.org/10.1680/jwarm.23.00034.10.1680/jwarm.23.00034 ↗
5. Kumari P, Paruthi S, Alyaseen A, Husain Khan A, Jijja A. Predictive performance assessment of recycled coarse aggregate concrete using artificial intelligence: a review. Clean Mater. 2024;13:100263. https://doi.org/10.1016/j.clema.2024.100263.10.1016/j.clema.2024.100263 ↗
6. Zheng Y, Zhang Y, Zhang P. Methods for improving the durability of recycled aggregate concrete: a review. J Mater Res Technol. 2021;15:6367–86. https://doi.org/10.1016/j.jmrt.2021.11.085.10.1016/j.jmrt.2021.11.085 ↗
7. Silva RV, De Brito J, Dhir RK. Prediction of the shrinkage behavior of recycled aggregate concrete: a review. Constr Build Mater. 2015;77:327–39. https://doi.org/10.1016/j.conbuildmat.2014.12.102.10.1016/j.conbuildmat.2014.12.102 ↗
8. Salesa Á, Pérez-Benedicto JA, Colorado-Aranguren D, López-Julián PL, Esteban LM, Sanz-Baldúz LJ, et al. Physico—mechanical properties of multi—recycled concrete from precast concrete industry. J Clean Prod. 2017;141:248–55. https://doi.org/10.1016/j.jclepro.2016.09.058.10.1016/j.jclepro.2016.09.058 ↗
9. Fiol F, Thomas C, Muñoz C, Ortega-López V, Manso JM. The influence of recycled aggregates from precast elements on the mechanical properties of structural self-compacting concrete. Constr Build Mater. 2018;182:309–23. https://doi.org/10.1016/j.conbuildmat.2018.06.132.10.1016/j.conbuildmat.2018.06.132 ↗
10. Liu Z, Zhao YG, Ma L, Lin S. Review on high-strength recycled aggregate concrete: mix design, properties, models and structural behaviour. Structures. 2024;64:106598. https://doi.org/10.1016/j.istruc.2024.106598.10.1016/j.istruc.2024.106598 ↗
11. Aghaee K, Khayat KH. Effect of shrinkage-mitigating materials on performance of fiber-reinforced concrete—an overview. Constr Build Mater. 2021;305:124586. https://doi.org/10.1016/j.conbuildmat.2021.124586.10.1016/j.conbuildmat.2021.124586 ↗
12. Sonar K, Sathe S. Exploring fiber reinforcements in concrete and its challenges: a comprehensive review. Multiscale Multidiscip Model Exp Design. 2024;7(4):3099–131. https://doi.org/10.1007/s41939-024-00404-8.10.1007/s41939-024-00404-8 ↗
13. Zheng Y, Lv X, Hu S, Zhuo J, Wan C, Liu J. Mechanical properties and durability of steel fiber reinforced concrete: a review. J Build Eng. 2024;82:108025. https://doi.org/10.1016/j.jobe.2023.108025.10.1016/j.jobe.2023.108025 ↗
14. Manso-Morato J, Hurtado-Alonso N, Revilla-Cuesta V, Skaf M, Ortega-López V. Fiber-reinforced concrete and its life cycle assessment: a systematic review. J Build Eng. 2024;94:110062. https://doi.org/10.1016/j.jobe.2024.110062.10.1016/j.jobe.2024.110062 ↗
15. Shen Y, Apraku SE, Zhu Y. Recycling and recovery of fiber-reinforced polymer composites for end-of-life wind turbine blade management. Green Chem. 2023;25(23):9644–58. https://doi.org/10.1039/d3gc03479h.10.1039/d3gc03479h ↗
16. Rani M, Choudhary P, Krishnan V, Zafar S. A review on recycling and reuse methods for carbon fiber/glass fiber composites waste from wind turbine blades. Compos Part B Eng. 2021;215:108768. https://doi.org/10.1016/j.compositesb.2021.108768.10.1016/j.compositesb.2021.108768 ↗
17. Joustra J, Flipsen B, Balkenende R. Structural reuse of wind turbine blades through segmentation. Compos Part C Open Access. 2021;5:100137. https://doi.org/10.1016/j.jcomc.2021.100137.10.1016/j.jcomc.2021.100137 ↗
18. Fonte R, Xydis G. Wind turbine blade recycling: an evaluation of the European market potential for recycled composite materials. J Environ Manage. 2021;287:112269. https://doi.org/10.1016/j.jenvman.2021.112269.10.1016/j.jenvman.2021.112269 ↗
19. Wei Y, Hadigheh SA. Enhancing carbon fibre recovery through optimised thermal recycling: kinetic analysis and operational parameter investigation. Mater Today Sustain. 2024;25:100661. https://doi.org/10.1016/j.mtsust.2023.100661.10.1016/j.mtsust.2023.100661 ↗
20. Tao Y, Hadigheh SA, Wei Y. Recycling of glass fibre reinforced polymer (GFRP) composite wastes in concrete: a critical review and cost benefit analysis. Structures. 2023;53:1540–56. https://doi.org/10.1016/j.istruc.2023.05.018.10.1016/j.istruc.2023.05.018 ↗
21. Yu T, Zhou C, Cao L, Zhang Y, Cao P, Shi F. Effect of GFRP fibres recovered from decommissioned wind turbine blades on the fracture properties of concrete. Constr Build Mater. 2025;463:140121. https://doi.org/10.1016/j.conbuildmat.2025.140121.10.1016/j.conbuildmat.2025.140121 ↗
22. Zhang F, Lu Z, Wang D. Working and mechanical properties of waste glass fiber reinforced self-compacting recycled concrete. Constr Build Mater. 2024;439:137172. https://doi.org/10.1016/j.conbuildmat.2024.137172.10.1016/j.conbuildmat.2024.137172 ↗
23. Liu P, Barlow CY. Wind turbine blade waste in 2050. Waste Manag. 2017;62:229–40. https://doi.org/10.1016/j.wasman.2017.02.007.10.1016/j.wasman.2017.02.007 ↗
24. Trento D, Faleschini F, Revilla-Cuesta V, Ortega-López V. Improving the early-age behavior of concrete containing coarse recycled aggregate with raw-crushed wind-turbine blade. J Build Eng. 2024;92:109815. https://doi.org/10.1016/j.jobe.2024.109815.10.1016/j.jobe.2024.109815 ↗
25. Kaboglu C, Pimenta S, Morris A, Dear JP. The effect of different types of core material on the flexural behavior of sandwich composites for wind turbine blades. J Therm Eng. 2017;3(2):1102–9. https://doi.org/10.18186/thermal.298608.10.18186/thermal.298608 ↗
26. Xu MX, Ji HW, Meng XX, Yang J, Wu YC, Di JY, et al. Effects of core materials on the evolution of products during the pyrolysis of end-of-life wind turbine blades. J Anal Appl Pyrolysis. 2023;175:106222. https://doi.org/10.1016/j.jaap.2023.106222.10.1016/j.jaap.2023.106222 ↗
27. Baturkin D, Hisseine OA, Masmoudi R, Tagnit-Hamou A, Massicotte L. Valorization of recycled FRP materials from wind turbine blades in concrete. Resour Conserv Recycl. 2021;174:105807. https://doi.org/10.1016/j.resconrec.2021.105807.10.1016/j.resconrec.2021.105807 ↗
28. Revilla-Cuesta V, Skaf M, Ortega-López V, Manso JM. Raw-crushed wind-turbine blade: waste characterization and suitability for use in concrete production. Resour Conserv Recycling. 2023;198:107160. https://doi.org/10.1016/j.resconrec.2023.107160.10.1016/j.resconrec.2023.107160 ↗
29. Hurtado-Alonso N, Manso-Morato J, Revilla-Cuesta V, Skaf M. Strength-based RSM optimization of concrete containing coarse recycled concrete aggregate and raw-crushed wind-turbine blade. Compos Struct. 2025;356:118895. https://doi.org/10.1016/j.compstruct.2025.118895.10.1016/j.compstruct.2025.118895 ↗
30. Ortega-López V, Faleschini F, Manso JM, Revilla-Cuesta V. Bending performance of concrete with coarse recycled aggregate and raw-crushed wind-turbine blade at an early age. Arch Civ Mech Eng. 2025;25(4):165. https://doi.org/10.1007/s43452-025-01215-5.10.1007/s43452-025-01215-5 ↗
31. Schmid S, Hachmann C, Boehm C, Krischer L, Mendler A, Kollofrath J, et al. Estimating Young’s moduli based on ultrasound and full-waveform inversion. Ultrasonics. 2024;136:107165. https://doi.org/10.1016/j.ultras.2023.107165.10.1016/j.ultras.2023.107165 ↗
32. Kolek J. An appreciation of the Schmidt rebound hammer. Mag Concr Res. 1958;10(28):27–36. https://doi.org/10.1680/macr.1958.10.28.27.10.1680/macr.1958.10.28.27 ↗
33. Sokołowska JJ, Załęgowski K, Czarnecki L. Measuring of the polymer concrete maturity using non-destructive ultrasonic method. Arch Civ Mech Eng. 2025;25(4):240. https://doi.org/10.1007/s43452-025-01285-5.10.1007/s43452-025-01285-5 ↗
34. Rahmati M, Toufigh V, Keyvan K. Monitoring of crack healing in geopolymer concrete using a nonlinear ultrasound approach in phase-space domain. Ultrasonics. 2023;134:107095. https://doi.org/10.1016/j.ultras.2023.107095.10.1016/j.ultras.2023.107095 ↗
35. Ali-Benyahia K, Kenai S, Ghrici M, Sbartaï ZM, Elachachi SM. Analysis of the accuracy of in-situ concrete characteristic compressive strength assessment in real structures using destructive and non-destructive testing methods. Constr Build Mater. 2023;366:130161. https://doi.org/10.1016/j.conbuildmat.2022.130161.10.1016/j.conbuildmat.2022.130161 ↗
36. Ottosen LM, Kunther W, Ingeman-Nielsen T, Karatosun S. Non-destructive testing for documenting properties of structural concrete for reuse in new buildings: a review. Materials. 2024;17(15):3814. https://doi.org/10.3390/ma17153814.10.3390/ma17153814 ↗
37. Kazemi M, Madandoust R, de Brito J. Compressive strength assessment of recycled aggregate concrete using Schmidt rebound hammer and core testing. Constr Build Mater. 2019;224:630–8. https://doi.org/10.1016/j.conbuildmat.2019.07.110.10.1016/j.conbuildmat.2019.07.110 ↗
38. Espinosa AB, Revilla-Cuesta V, Skaf M, Faleschini F, Ortega-López V. Utility of ultrasonic pulse velocity for estimating the overall mechanical behavior of recycled aggregate self-compacting concrete. Appl Sci. 2023;13(2):874. https://doi.org/10.3390/app13020874.10.3390/app13020874 ↗
39. Singh N, Singh SP. Evaluating the performance of self compacting concretes made with recycled coarse and fine aggregates using non destructive testing techniques. Constr Build Mater. 2018;181:73–84. https://doi.org/10.1016/j.conbuildmat.2018.06.039.10.1016/j.conbuildmat.2018.06.039 ↗
40. Revilla-Cuesta V, Shi JY, Skaf M, Ortega-López V, Manso JM. Non-destructive density-corrected estimation of the elastic modulus of slag-cement self-compacting concrete containing recycled aggregate. Dev Built Environ. 2022;12:100097. https://doi.org/10.1016/j.dibe.2022.100097.10.1016/j.dibe.2022.100097 ↗
41. Bawa S, Alam P, Saini S. Evaluation of performance of hybrid fiber-reinforced self-compacting concrete using non-destructive testing techniques. Innov Infrastruct Solut. 2023;8(4):126. https://doi.org/10.1007/s41062-023-01092-y.10.1007/s41062-023-01092-y ↗
42. Del Savio AA, La Torre Esquivel D, Carrillo J, Chi Yep E. Determination of polypropylene fiber-reinforced concrete compressive strength and elasticity modulus via ultrasonic pulse tests. Appl Sci. 2022;12(20):10375. https://doi.org/10.3390/app122010375.10.3390/app122010375 ↗
43. EN-Euronorm. Rue de stassart, 36. Belgium-1050 Brussels, European Committee for Standardization.
44. EC-2. Eurocode 2: Design of concrete structures. Part 1–1: General rules and rules for buildings. CEN (European Committee for Standardization). 2010.
45. Hurtado-Alonso N, Manso-Morato J, Revilla-Cuesta V, Skaf M, Ortega-López V. Optimization of cementitious mixes through response surface method: a systematic review. Arch Civ Mech Eng. 2025;25(1):54. https://doi.org/10.1007/s43452-024-01112-3.10.1007/s43452-024-01112-3 ↗
46. Wang W, Shen A, Lyu Z, He Z, Nguyen KTQ. Fresh and rheological characteristics of fiber reinforced concrete——a review. Constr Build Mater. 2021;296:123734. https://doi.org/10.1016/j.conbuildmat.2021.123734.10.1016/j.conbuildmat.2021.123734 ↗
47. Islam MJ, Shahjalal M, Haque NMA. Mechanical and durability properties of concrete with recycled polypropylene waste plastic as a partial replacement of coarse aggregate. J Build Eng. 2022;54:104597. https://doi.org/10.1016/j.jobe.2022.104597.10.1016/j.jobe.2022.104597 ↗
48. Da Silva A, Kyriakides S. Compressive response and failure of balsa wood. Int J Solids Struct. 2007;44(25–26):8685–717. https://doi.org/10.1016/j.ijsolstr.2007.07.003.10.1016/j.ijsolstr.2007.07.003 ↗
49. Abd El-Malak NA. Ultrasonic properties of composites (polymer-fibre glass). Bull Mater Sci. 1997;20(7):981–90. https://doi.org/10.1007/BF02744886.10.1007/BF02744886 ↗
50. Stat-Ease Inc. Design Expert version 13.0.5 2025.
51. Li Z, Lu D, Gao X. Optimization of mixture proportions by statistical experimental design using response surface method—a review. J Build Eng. 2021;36:102101. https://doi.org/10.1016/j.jobe.2020.102101.10.1016/j.jobe.2020.102101 ↗
52. Statgraphics Technologies Inc. Statgraphics 19 X64. 2025.
53. Revilla-Cuesta V, Serrano-López R, Espinosa AB, Ortega-López V, Skaf M. Analyzing the relationship between compressive strength and modulus of elasticity in concrete with ladle furnace slag. Buildings. 2023;13(12):3100. https://doi.org/10.3390/buildings13123100.10.3390/buildings13123100 ↗
54. Jones R. The ultrasonic testing of concrete. Ultrasonics. 1963;1(2):78–82. https://doi.org/10.1016/0041-624X(63)90058-1.10.1016/0041-624X(63)90058-1 ↗
55. de-Prado-Gil J, Martínez-García R, Jagadesh P, Juan-Valdés A, Gónzalez-Alonso MI, Palencia C. To determine the compressive strength of self-compacting recycled aggregate concrete using artificial neural network (ANN). Ain Shams Eng J. 2024;15(2):102548. https://doi.org/10.1016/j.asej.2023.102548.10.1016/j.asej.2023.102548 ↗
56. Bellavia S, Gratton S, Riccietti E. A Levenberg–Marquardt method for large nonlinear least-squares problems with dynamic accuracy in functions and gradients. Numer Math. 2018;140(3):791–825. https://doi.org/10.1007/s00211-018-0977-z.10.1007/s00211-018-0977-z ↗
57. Faleschini F, Hofer L, Belluco S, Pellegrino C. Reliability-based design of transmission and anchorage lengths in prestressed concrete elements. Struct Concr. 2023;24(3):3573–91. https://doi.org/10.1002/suco.202200604.10.1002/suco.202200604 ↗