Anticorrosion coatings in cooling towers: the role of methyl esters and stearic acid
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Adsorption and Cooling Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (96)
Show source-provided references
1. Hulimka J. Natural draft cooling towers: typical defects and damage after long-term operation. Kaszyńska Maria, editors: Awarie budowlane. Zapobieganie, diagnostyka, naprawy, rekonstrukcje, 2022, Zachodniopomorski Uniwersytet Technologiczny w Szczecinie, ISBN 978-83-7663-337-4, 537–548.
2. Bertolini L, Elsener B, Pedeferri P, Redaelli E, Polder RB. Corrosion of steel in concrete: prevention, diagnosis, repair. Wiley-VCH Verlag GmbH & Co. KGaA; 2013. https://doi.org/10.1002/9783527651696.10.1002/9783527651696 ↗
3. Medeiros M, Helene P. Efficacy of surface hydrophobic agents in reducing water and chloride ion penetration in concrete. Mater Struct. 2008;41(1):59–71. https://doi.org/10.1617/s11527-006-9218-5.10.1617/s11527-006-9218-5 ↗
4. Pan X, Shi C, Jia L, Zhang J, Wu L. Effect of inorganic surface treatment on air permeability of cement-based materials. J Mater Civ Eng. 2015;04015145. https://doi.org/10.1016/j.cemconcomp.2018.03.026.10.1016/j.cemconcomp.2018.03.026 ↗
5. Franzoni E, Pigino B, Pistolesi C. Ethyl silicate for surface protection of concrete: performance in comparison with other inorganic surface treatments. Cem Concr Compos. 2013;44:69–76. https://doi.org/10.1016/j.cemconcomp.2013.05.008.10.1016/j.cemconcomp.2013.05.008 ↗
6. Barnat-Hunek D, Grzegorczyk-Frańczak M, Suchorab Z. Surface hydrophobisation of mortars with waste aggregate by nanopolymer trietoxi-isobutyl-silane and methyl silicon resin. Constr Build Mater. 2020;264:120175. https://doi.org/10.1016/j.conbuildmat.2020.120175.10.1016/j.conbuildmat.2020.120175 ↗
7. Pfeifer DW, Scali MJ. Concrete sealers for protection of Bridge structures. NCHRP report 244. Transport Research Board, National Research Council; 1981.
8. Suchorab Z, Barnat-Hunek D, Franus M, Łagód G. Mechanical and physical properties of hydrophobized lightweight aggregate concrete with sewage sludge. Materials. 2016;317:1–18. https://doi.org/10.3390/ma9050317.10.3390/ma9050317 ↗
9. Basheer L, Cleland DJ. Freeze–thaw resistance of concretes treated with pore liners. Constr Build Mater. 2006;20(10):990–8. https://doi.org/10.1016/j.conbuildmat.2005.06.010.10.1016/j.conbuildmat.2005.06.010 ↗
10. Zhang N, Kong X, Chang Y, Qiao W, Zhang M, Kang R. Robust photothermal superhydrophobic concrete coating for efficient anti-icing/de-icing. J Build Eng. 2025;101:111842. https://doi.org/10.1016/j.jobe.2025.111842.10.1016/j.jobe.2025.111842 ↗
11. Almusallam AA, Khan FM, Dulaijan SU, Al-Amoudi OSB. Effectiveness of surface coatings in improving concrete durability. Cem Concr Compos 25. 2003;473–81. https://doi.org/10.1016/S0958-9465(02)00087-2.10.1016/S0958-9465(02)00087-2 ↗
12. Diamanti MV, Brenna A, Bolzoni F, Berra M, Pastore T, Ormellese M. Effect of polymer modified cementitious coatings on water and chloride permeability in concrete. Constr Build Mater. 2013;49:720–8.10.1016/j.conbuildmat.2013.08.050 ↗
13. Liu Z, Hansen W. Effect of hydrophobic surface treatment on freeze-thaw durability of concrete. Cem Concr Comp. 2016;69:49–60. https://doi.org/10.1016/j.cemconcomp.2016.03.001.10.1016/j.cemconcomp.2016.03.001 ↗
14. Felekoğlu B. A method for improving the early strength of pumice concrete blocks by using alkyl alkoxy silane (AAS). Constr Build Mater. 2012;28:305–10. https://doi.org/10.1016/j.conbuildmat.2011.07.026.10.1016/j.conbuildmat.2011.07.026 ↗
15. Jones MR, Dhir RK, Gill JP. Concrete surface treatment: effect of exposure temperature on chloride diffusion resistance. Cem Concr Res. 1995;25(1):197–208. https://doi.org/10.1016/0008-8846(94)00127-K.10.1016/0008-8846(94)00127-K ↗
16. Basheer P, Basheer L, Cleland DJ, Long AE. Surface treatments for concrete: assessment methods and reported performance. Constr Build Mater. 1997;11(7):413–29. https://doi.org/10.1016/S0950-0618(97)00019-6.10.1016/S0950-0618(97)00019-6 ↗
17. McCarter WJ. Assessing the protective qualities of treated and untreated concrete surfaces under cyclic wetting and drying. Build Environ. 1996;31:551–6. https://doi.org/10.1016/0360-1323(96)00020-0.10.1016/0360-1323(96)00020-0 ↗
18. Toutanji HA, Choi H, Wong D, Gilbert JA, Alldredge DJ. Applying a polyurea coating to high-performance organic cementitious materials. Constr Build Mater. 2013;38:1170–9. https://doi.org/10.1016/j.conbuildmat.2012.09.041.10.1016/j.conbuildmat.2012.09.041 ↗
19. Woo R, Zhu H, Chow M, Leumg C, Kim J. Barrier performance of silane-clay nanocomposite coatings on concrete structure. Compos Sci Technol. 2008;68:2828–36. https://doi.org/10.1016/S0958-9465(02)00087-2.10.1016/S0958-9465(02)00087-2 ↗
20. Ibrahim M, Al-Gahtani AS, Maslehuddin M, Almusallam AA. Effectiveness of concrete surface treatment materials in reducing chloride-induced reinforcement corrosion. Constr Build Mater. 1997;11:7–8. https://doi.org/10.1016/s0950-0618(97)00023-8.10.1016/s0950-0618(97)00023-8 ↗
21. Aguiar JB, Júnior C. Carbonation of surface protected concrete. Constr Build Mater. 2013;49:478–83. https://doi.org/10.1016/j.conbuildmat.2013.08.058.10.1016/j.conbuildmat.2013.08.058 ↗
22. Nia SM, Othman F. Evaluation of organic coating materials efficiency in sewage concrete pipe. In: Proceeding of the international conference for technical postgraduates (TECHPOS 2009), Kuala Lumpur, Malaysia; 2009.
23. He D, Han H, Yi M, Xu Z, Hui H, Wang R, Zhou M. Overview of smart anti-corrosion coatings and their micro/nanocontainer gatekeepers. Mater Today Commun. 2025;42:111316. https://doi.org/10.1016/j.mtcomm.2024.111316.10.1016/j.mtcomm.2024.111316 ↗
24. Hosoda A, Matsuda Y, Kobayashi K. Optimum surface protection system with silane type water repellents. J Adv Concr Technol. 2010;8:291–302. https://doi.org/10.3151/jact.8.291.10.3151/jact.8.291 ↗
25. Szafraniec M, Barnat-Hunek D, Grzegorczyk-Frańczak M, Trochonowicz M. Surface modification of lightweight mortars by nanopolymers to improve their water-repellency and durability. Materials (Basel). 2020;13:1350. https://doi.org/10.3390/ma13061350.10.3390/ma13061350 ↗
26. Dang Y, Xie N, Kessel A, McVey E, Pace A, Shi X. Accelerated laboratory evaluation of surface treatments for protecting concrete bridge decks from salt scaling. Constr Build Mater. 2014;55:128–35. https://doi.org/10.1016/j.conbuildmat.2014.01.014.10.1016/j.conbuildmat.2014.01.014 ↗
27. Levi M, Ferro C, Regazzoli D, Dotelli G, Lo PA. Comparative evaluation method of polymer surface treatments applied on high performance concrete. J Mater Sci. 2002;37(22):4881–8. https://doi.org/10.1023/A:1020810113110.10.1023/A:1020810113110 ↗
28. Reddy B, Sykes JM. Degradation of organic coatings in a corrosive environment: a study by scanning Kelvin probe and scanning acoustic microscope. Prog Org Coat. 2005;52(4):280–7. https://doi.org/10.1016/j.porgcoat.2004.04.004.10.1016/j.porgcoat.2004.04.004 ↗
29. Al-Turaif HA. Surface morphology and chemistry of epoxy-based coatings after exposure to ultraviolet radiation. Prog Org Coat. 2013;76(4):677–81. https://doi.org/10.3390/polym16010067.10.3390/polym16010067 ↗
30. Li G, Yang B, Guo C, Du J, Wu X. Time dependence and service life prediction of chloride resistance of concrete coatings. Constr Build Mater. 2015;83:19–25. https://doi.org/10.1016/j.conbuildmat.2015.03.003.10.1016/j.conbuildmat.2015.03.003 ↗
31. Dai J, Akira Y, Wittmann FH, Yokota H, Zhang P. Water repellent surface impregnation for extension of service life of reinforced concrete structures in marine environments: the role of cracks. Cem Conc Compos. 2010;32:101–9. https://doi.org/10.1016/j.cemconcomp.2009.11.001.10.1016/j.cemconcomp.2009.11.001 ↗
32. Gao M, Liu W, Wang H, Shao X, Shi A, An X, Li G, Nie L. Emission factors and characteristics of volatile organic compounds (VOCs) from adhesive application in indoor decoration in China. Sci Total Environ. 2021;779:145169. https://doi.org/10.1016/j.scitotenv.2021.145169.10.1016/j.scitotenv.2021.145169 ↗
33. Ma Y, Fu S, Gao S, Zhang S, Che X, Wang Q, Jiao Z. Update on volatile organic compound (VOC) source profiles and ozone formation potential in synthetic resins industry in China. Environ Pollut. 2021;291:118253. https://doi.org/10.1016/j.envpol.2021.118253.10.1016/j.envpol.2021.118253 ↗
34. Directive 2004/42/EC of the European Parliament and of the Council of 21. April 2004 on the limitation of emissions of volatile organic compounds due to the use of organic solvents in certain paints and varnishes and vehicle refinishing products and amending directive 1999/13/EC.
35. Directive. 2010/75/EU of the European Parliament and of the Council of 24 November 2010 on industrial emissions (integrated pollution prevention and control) (recast).
36. Barnat-Hunek D, Andrzejuk W, Szafraniec M, Kachel M, Hunek R. Modification of concrete surface with higher fatty acids. Adv Sci Technol Res J. 2023;17(2):307–21. https://doi.org/10.12913/22998624/159722.10.12913/22998624/159722 ↗
37. Li J, Wu Y. Lubricants in pharmaceutical solid dosage forms. Lubricants. 2014;2(1):21-43.10.3390/lubricants2010021 ↗
38. Si Y, Guo Z, Liu W. A robust epoxy resins stearic acid-Mg(OH)2 micronanosheet superhydrophobic omnipotent protective coating for real-life applications. ACS Appl Mater Interfaces. 2016;8:16511–20. https://doi.org/10.1021/acsami.6b04668.10.1021/acsami.6b04668 ↗
39. Li YB, Weng WJ. Surface modification of hydroxyapatite by stearic acid: char-acterization and in vitro behaviors. J Mater Sci Mater M. 2008;19:19–25. https://doi.org/10.1007/s10856-007-3123-5.10.1007/s10856-007-3123-5 ↗
40. Qu ZY, Yu QL. Synthesizing super-hydrophobic ground granulated blast furnace slag to enhance the transport property of lightweight aggregate concrete. Constr Build Mater. 2018;191:176–86. https://doi.org/10.1016/j.conbuildmat.2018.10.018.10.1016/j.conbuildmat.2018.10.018 ↗
41. Wong HS, Barakat R, Alhilali A, Saleh M, Cheeseman CR. Hydrophobic concrete using waste paper sludge as. Cem Concr Res. 2015;70:9–20. https://doi.org/10.1016/j.cemconres.2015.01.005.10.1016/j.cemconres.2015.01.005 ↗
42. Teoh WP, Wong AW, Lem KH, Habib NZ, Looi SY, Bashir MJK, Ng CA. Sustainable production of eco-friendly roofing tile using methyl ester residue as the alternative binder: a preliminary study. Constr Build Mater. 2024;429:136319. https://doi.org/10.1016/j.conbuildmat.2024.136319.10.1016/j.conbuildmat.2024.136319 ↗
43. Yang L, Pang Y, Chen X, Tang Q, Cui H, Gao D, Chen M. Effect of the stearic acid modified metakaolin on sulfate resistance of mortar based on the experimental study and capillary theory analysis. J Build Eng. 2023;71:106513. https://doi.org/10.1016/j.jobe.2023.106513.10.1016/j.jobe.2023.106513 ↗
44. Pang Y, Wang H, Tang Q, Yang L. Enhancing cement mortar hydrophobicity against dry-wet cycling sulfate attack using stearic acid modified mica powder via high-temperature stirring. Constr Build Mater. 2024;441:137556. https://doi.org/10.1016/j.conbuildmat.2024.137556.10.1016/j.conbuildmat.2024.137556 ↗
45. Yang L, Pang Y, Tang Q, Chen X, Gao D, Li H. Effects of the stearic acid modified mica powder on hydrophobic properties and salt freezing resistance of mortar: experimental study and microscopic mechanism analysis. Constr Build Mater. 2024;416:135188. https://doi.org/10.1016/j.conbuildmat.2024.135188.10.1016/j.conbuildmat.2024.135188 ↗
46. Lei L, Wang Q, Xu S, Wang N, Zheng X. Fabrication of superhydrophobic concrete used in marine environment with anti-corrosion and stable mechanical properties. Constr Build Mater. 2020;251:118946. https://doi.org/10.1016/j. conbuildmat.2020.118946.10.1016/j.conbuildmat.2020.118946 ↗
47. Cellat K, Beyhan B, Güngör C, Konuklu Y, Karahan O, Dündar C, Paksoy H. Thermal enhancement of concrete by adding bio-based fatty acids as phase change materials. Energy Build. 2015;106:156–63. https://doi.org/10.1016/j.enbuild.2015.05.035.10.1016/j.enbuild.2015.05.035 ↗
48. Hunek R, Franus W. Epoxy resin VOCs reduction by using higher fatty acids from the agricultural industry: review. Arch Environ Prot. 2025;51:45–56. https://doi.org/10.24425/aep.2025.153748.10.24425/aep.2025.153748 ↗
49. PN-EN 206 + A1:2021-08 Concrete. Requirements, characteristics, production and conformity. Polish committee for standardization. PKN. Warsaw, Poland, 2021.
50. PN-EN 197-1:2012. Cement—Part 1: Composition, specifications and conformity criteria for common Cements; Polish committee for standardization. PKN: Warsaw, Poland, 2012.
51. http://pol.sika.com/dam/dms/plcon/k/sds-sikagard-680sbetoncolorcolorless.pdf
52. http://nano.24.pl/bruk-i-beton/nanobauer-paving-cleaner-czyszczenie-bruku-betonu-i-kostki-brukowej-preparat-35-90#/8-pojemnosc-1l
53. https://www.belzona.com/en/products/5000/5811.aspx
54. https://www.belzona.com/en/products/4000/4151.aspx
55. https://silanes.evonik.com/en/product/PR_52010364?name=Protectosil-SH
56. Hassa R, Mrzigod J, Nowakowski J. Podręczny słownik chemiczny, Videograf II, Katowice, 2004, p. 216. ISBN 83-7183-240-0 (in Polish).
57. https://www.bioecooil.pl/images/oferta/aBIOECO-B-Karta-charakterystyki.pdf
58. PN-B-06250. :1988 Concrete. Polish committee for standardization. Warsaw, Poland: PKN; 1988.
59. EN 12370:2001. Natural stone test Methods—determination of resistance to salt crystallisation; European committee for standardization. CEN: Brussels, Belgium,; 2001.
60. https://www.statystyka.eu/test-anova-kruskala-wallisa.php
61. Sandurska E, Szulc A. A method of statistical analysis in the field of sports science when assumptions of parametric tests are not violated. J Educ Health Sport. 2016;6(13):275–87. https://doi.org/10.5281/zenodo.293762. (eISSN 2391-8306).10.5281/zenodo.293762 ↗
62. Neville AM, Ajdukiewicz A, Degler A, Kasperkiewicz J. Właściwości betonu. Stowarzyszenie Producentów Cementu. Kraków 2012. ISBN: 9788361331162 (In Poish).
63. Kelar K, Ciecielska D. Fizykochemia polimerów. Wybrane Zagadnienia. Poznań: Wyd. Politechniki Poznańskiej; 1997. (In Polish).
64. Dutkiewicz ET. Fizykochemia powierzchni, Wykłady z chemii fizycznej, Wydawnictwa Naukowo—Techniczne, Warszawa, 1998, s. 13–73, 99–107 (in Polish).
65. Szewczak A, Szeląg M. Physico ̶ mechanical and rheological properties of epoxy adhesives modified by microsilica and sonication process. Materials. 2020;13(23):5310. https://doi.org/10.3390/ma13235310.10.3390/ma13235310 ↗
66. Arguien M, Muth S. Bowman Ch. Sonication Labile Peg Based Polymer Hydrogels. 2023 AIChE Annual Meeting. AIChE, 2023.
67. Rabek JF. Współczesna Wiedza o Polimerach. Warszawa: Wydawnictwo Naukowe PWN; 2013. (In Polish).
68. Arunjunai RS, Santha Kumar A, Padmakumar U, Kalita S, Samanta A, Baral NK, Singha M, Ashokkumar GG, Qiao. Ultrasonics in polymer science: applications and challenges. Prog Mater Sci. 2023;136:101113. https://doi.org/10.1016/j.pmatsci.2023.101113.10.1016/j.pmatsci.2023.101113 ↗
69. Lin Y-H. Polymer viscoelasticity: basics, molecular theories, experiments and simulations. World Scientific; 2010.10.1142/7786 ↗
70. Akbulatov S, Boulatov R. Experimental polymer mechanochemistry and its interpretational frameworks. ChemPhysChem. 2017;1811:1422–50. https://doi.org/10.1002/cphc.201601354.10.1002/cphc.201601354 ↗
71. Pielichowski K, Njuguna J, Majka TM. Thermal degradation of polymeric materials. Elsevier; 2022.10.1002/9783527828692 ↗
72. Kulkarni SA, Satishchandra B, Ogale, Vijayamohanan KP. Tuning the hydrophobic properties of silica particles by surface silanization using mixed self-assembled monolayers. J Colloid Interface Sci. 2008;318(2):372–9. https://doi.org/10.1016/j.jcis.2007.11.012.10.1016/j.jcis.2007.11.012 ↗
73. Wang L, Ulrich SS, Hoeppener S. Surface chemical reactions on self-assembled silane based monolayers. Chem Soc Rev. 2021;50(11):6507–40. https://doi.org/10.1039/D0CS01220C.10.1039/D0CS01220C ↗
74. An Y, et al. Preparation and self-assembly of carboxylic acid-functionalized silica. J Colloid Interface Sci. 2007;311(2):507–13. https://doi.org/10.1016/j.jcis.2007.02.084.10.1016/j.jcis.2007.02.084 ↗
75. Ma PC, Kim JK, Tang BZ. Functionalization of carbon nanotubes using a silane coupling agent. Carbon. 2006;44(15):3232–8. https://doi.org/10.1016/j.carbon.2006.06.032.10.1016/j.carbon.2006.06.032 ↗
76. https://pol.sika.com/pl/budownictwo/materia-y-uszczelniajce/materia-y-hydroizolacyjne/sikafloor-400-nelastic.html
77. Wu M, et al. Improving electrical, mechanical, thermal and hydrophobic properties of waterborne acrylic resin-glycidyl methacrylate (GMA) by adding multi-walled carbon nanotubes. Polymer. 2020;200:122547. https://doi.org/10.1016/j.polymer.2020.122547.10.1016/j.polymer.2020.122547 ↗
78. Xue F, et al. Facile Preparation of a mechanically robust superhydrophobic acrylic polyurethane coating. J Mater Chem A. 2015;3(26):13856–63. https://doi.org/10.1039/c5ta02780b.10.1039/c5ta02780b ↗
79. Zhang X, et al. Molecular simulation of electron traps in epoxy resin/graphene oxide nanocomposites. Polymers. 2022;14:4208. https://doi.org/10.3390/polym14194208.10.3390/polym14194208 ↗
80. Hill D, Barron AR, Shirin A. Comparison of hydrophobicity and durability of functionalized aluminium oxide nanoparticle coatings with magnetite nanoparticles–links between morphology and wettability. J Colloid Interface Sci. 2019;555:323–30. https://doi.org/10.1016/j.jcis.2019.07.080.10.1016/j.jcis.2019.07.080 ↗
81. Wu Y, et al. Synthesis of graphene/epoxy resin composite via 1, 8-diaminooctane by ultrasonication approach for corrosion protection. Ultrason Sonochem. 2018;42:464–70. https://doi.org/10.1016/j.ultsonch.2017.12.012.10.1016/j.ultsonch.2017.12.012 ↗
82. Razavi SM, Reza, et al. Superhydrophobic surfaces made from naturally derived hydrophobic materials. ACS Sustain Chem Eng. 2017;5(12):11362–70. https://doi.org/10.1021/acssuschemeng.7b02424.10.1021/acssuschemeng.7b02424 ↗
83. Kong PS, Pérès Y, Daud WMAW, Cognet P, Aroua MK. Esterification of glycerol with oleic acid over hydrophobic zirconia-silica acid catalyst and commercial acid catalyst: optimization and influence of catalyst acidity. Front Chem. 2019;7:205. https://doi.org/10.3389/fchem.2019.00205.10.3389/fchem.2019.00205 ↗
84. Hinton G, Roweis S. Stochastic neighbor embedding (PDF). Neural Information Processing Systems. (2002).
85. Yang L, Pang Y, Tang Q, Chen X, Gao D, Li H, Wang H. Effects of the stearic acid modified mica powder on hydrophobic properties and salt freezing resistance of mortar: experimental study and microscopic mechanism analysis. Constr Build Mater. 2024;416:135188. https://doi.org/10.1016/j.conbuildmat.2024.135188.10.1016/j.conbuildmat.2024.135188 ↗
86. Hu Z, Zen X, Gong J, Deng Y. Water resistance improvement of paper by superhydrophobic modification with microsized CaCO3 and fatty acid coating. Colloids Surf A. 2009;351:1–3. https://doi.org/10.1016/j.colsurfa.2009.09.036.10.1016/j.colsurfa.2009.09.036 ↗
87. Kong X, Shen Y, Shi J, Zhang N, Kang R, Fu Y. Superhydrophobic concrete coating with excellent mechanical robustness and anti-corrosion performances. Colloids Surf A Physicochem Eng Asp. 2024;684:133157. https://doi.org/10.1016/j.colsurfa.2024.133157.10.1016/j.colsurfa.2024.133157 ↗
88. Feng Y, Chen S, Cheng YF. Stearic acid modified zinc nano-coatings with superhydrophobicity and enhanced antifouling performance. Surf Coat Technol. 2018;340:55–65. https://doi.org/10.1016/j.surfcoat.2018.02.053.10.1016/j.surfcoat.2018.02.053 ↗
89. Wang G, Song D, Qiao Y, Cheng J, Liu H, Jiang J, Ma A, Ma X. Developing super-hydrophobic and corrosion-resistant coating on magnesium-lithium alloy via one-step hydrothermal processing. J Magnes Alloys. 2023;11:1422–39. https://doi.org/10.1016/j.jma.2021.08.002.10.1016/j.jma.2021.08.002 ↗
90. Vishnu J, Praveenkumar K, Kumar AA, Nair A, Arjun R, Gopakumar Pillai V, Shankar B, Shankar KV. Multifunctional zinc oxide loaded stearic acid surfaces on biodegradable magnesium WE43 alloy with hydrophobic, self-cleaning and biocompatible attributes. Appl Surf Sci. 2025;610:161455. https://doi.org/10.1016/j.apsusc.2024.161455.10.1016/j.apsusc.2024.161455 ↗
91. Wang Y, Zhang D, Lu Z. Hydrophobic Mg-Al layered double hydroxide film on aluminum: fabrication and microbiologically influenced corrosion resistance properties. Colloids Surf. A., 2015;474:44–51. https://doi.org/10.1016/j.colsurfa.2015.03.005.10.1016/j.colsurfa.2015.03.005 ↗
92. Łukowski P. Studies on the microstructure of epoxy-cement composites. Arch Civ Eng. 2016;2:101–13. https://doi.org/10.1515/ace-2015-0068.10.1515/ace-2015-0068 ↗
93. Fu H, Pang B, Wang P et al. Microstructure and durability of rapid repair mortar with self-emulsifying waterborne epoxy polymer. Mater Today Commun (2024);40:109375.10.1016/j.mtcomm.2024.109375 ↗
94. Pang B, Jin Z, Zhang Y, et al. Ultraductile cementitious structural health monitoring coating: waterborne polymer biomimetic muscle and polyhedral oligomeric silsesquioxane-assisted C-S-H dispersion. Adv Funct Mater. 2022;32(51). https://doi.org/10.1002/adfm.202208676.10.1002/adfm.202208676 ↗
95. Lyu M, Yang X, Li J, et al. High toughness plant oil-based epoxy resins simultaneous with low dielectric properties. Ind Crops Prod. 2024;207:117731.10.1016/j.indcrop.2023.117731 ↗
96. Lascano D, Gomez-Caturla J, Garcia-Sanoguera D, et al. Optimizing biobased thermoset resins by incorporating cinnamon derivative into acrylated epoxidized soybean oil. Mater Des. 2024;243:113084. https://doi.org/10.1016/j.matdes.2024.113084.10.1016/j.matdes.2024.113084 ↗