Effect of deformation on α phase precipitation during subsequent slow cooling in TC18 titanium alloy
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Magnesium Alloys: Properties and Applications · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Gupta A, Khatirkar R, Singh J. A review of microstructure and texture evolution during plastic deformation and heat treatment of β-ti alloys. J Alloy Compd. 2022;899:163242. https://doi.org/10.1016/j.jallcom.2021.163242.10.1016/j.jallcom.2021.163242 ↗
2. Zhao Q, Sun Q, Xin S, Chen Y, Wu C, Wang H, Xu J, Wan M, Zeng W, Zhao Y. High-strength titanium alloys for aerospace engineering applications: a review on melting-forging process. Mater Sci Engineering: A. 2022;845:143260. https://doi.org/10.1016/j.msea.2022.143260.10.1016/j.msea.2022.143260 ↗
3. Li C, Huang L, Li C, Hui S, Yu Y, Zhao M, Guo S, Li J. Research progress on hot deformation behavior of high-strength β titanium alloy: flow behavior and constitutive model. Rare Met. 2022;41(5):1434–55. https://doi.org/10.1007/s12598-021-01861-7.10.1007/s12598-021-01861-7 ↗
4. Lin YC, Xiao Y, Jiang Y, Pang G, Li H, Zhang X, Zhou K. Spheroidization and dynamic recrystallization mechanisms of ti-55511 alloy with bimodal microstructures during hot compression in α + β region. Mater Sci Engineering: A. 2020;782:139282. https://doi.org/10.1016/j.msea.2020.139282.10.1016/j.msea.2020.139282 ↗
5. Zhang Q, Jin M, Zhang Y, Wang H, Chen L, Yang S, Guo B. Experimental investigation on kinetic behavior of the deformation-induced α→β transformation during hot working of ti–6al–2zr–1mo–1v alloy below the β-transus. Mater Sci Engineering: A. 2022;843:143110. https://doi.org/10.1016/j.msea.2022.143110.10.1016/j.msea.2022.143110 ↗
6. Yin J, Yang C. A WOA-BP neural network microstructure evolution prediction model of TC11 titanium alloy and application in Hollow shaft during cross wedge rolling with mandrel. Arch Civ Mech Eng. 2024;24(2). https://doi.org/10.1007/s43452-024-00905-w.10.1007/s43452-024-00905-w ↗
7. Ahmed M, Savvakin DG, Ivasishin OM, Pereloma EV. The effect of cooling rates on the microstructure and mechanical properties of thermo-mechanically processed ti–al–mo–v–cr–fe alloys. Mater Sci Engineering: A. 2013;576:167–77. https://doi.org/10.1016/j.msea.2013.03.083.10.1016/j.msea.2013.03.083 ↗
8. Wu C, Huang L, Li CM. Experimental investigation on dynamic phase transformation and texture evolution of ti55531 high strength titanium alloy during hot compression in the α + β region. Mater Sci Engineering: A. 2020;773:138851. https://doi.org/10.1016/j.msea.2019.138851.10.1016/j.msea.2019.138851 ↗
9. Luo J, Liu SF, Li MQ. Quantitative analysis of microstructure and deformation mechanisms during isothermal compression of ti–5al–5mo–5v–1cr–1fe alloy. Mater Charact. 2015;108:115–23. https://doi.org/10.1016/j.matchar.2015.09.003.10.1016/j.matchar.2015.09.003 ↗
10. Lin YC, Huang J, He D, Zhang X, Wu Q, Wang L, Chen C, Zhou K. Phase transformation and dynamic recrystallization behaviors in a ti55511 titanium alloy during hot compression. J Alloy Compd. 2019;795:471–82. https://doi.org/10.1016/j.jallcom.2019.04.319.10.1016/j.jallcom.2019.04.319 ↗
11. Li K, Yang P. Strain-induced α-to-β phase transformation during hot compression in ti – 5al – 5mo – 5v – 1cr – 1fe alloy. Trans Nonferrous Met Soc China. 2019;29(2):296–304. https://doi.org/10.1016/S1003-6326(19)64939-3.10.1016/S1003-6326(19)64939-3 ↗
12. Babu B, Lindgren L. Dislocation density based model for plastic deformation and globularization of ti-6al-4v. Int J Plast. 2013;50:94–108. https://doi.org/10.1016/j.ijplas.2013.04.003.10.1016/j.ijplas.2013.04.003 ↗
13. Cui Y, Zheng W, Li C, Cao G, Wang Y. Effectiveness of hot deformation and subsequent annealing for β grain refinement of ti–5al–5mo–5v–1cr–1fe titanium alloy. Rare Met. 2021;40(12):3608–15. https://doi.org/10.1007/s12598-020-01677-x.10.1007/s12598-020-01677-x ↗
14. Zheng Z, Chai L, Li Z, Huang W, Tian L, Wang Y, Liu L. Effects of β-cooling rates on microstructural characteristics and hardness of Ti–5al–5mo–5v–3cr–1fe metastable β Ti alloy. Mater Chem Phys. 2022;276:125318. https://doi.org/10.1016/j.matchemphys.2021.125318.10.1016/j.matchemphys.2021.125318 ↗
15. Shao H, Shan D, Wang K, Zhang G, Zhao Y. Massive α precipitation selectivity and tensile fracture behavior of TC18 alloy. J Alloy Compd. 2019;797:10–7. https://doi.org/10.1016/j.jallcom.2019.04.315.10.1016/j.jallcom.2019.04.315 ↗
16. Jiang H, Jiang F, Xie B, Wang B, Xu B, Hu X, Xu L, He Z, Zhang H, Wu Y, Sun M. Effects of the cooling rate on mechanical properties and microstructure of near-α ti-6al-3zr-2nb-mo alloy. Mater Charact. 2023;195:112529. https://doi.org/10.1016/j.matchar.2022.112529.10.1016/j.matchar.2022.112529 ↗
17. Wojtaszek M, Zyguła K, Bukaszek-Sołek A, Jabłońska M, Stanik R, Gude M. Forging of PM ti–6al–4v alloy at the temperature above β-transus and high strain rate: modeling and trials in industrial conditions. Arch Civ Mech Eng. 2023;23(2). https://doi.org/10.1007/s43452-023-00636-4.10.1007/s43452-023-00636-4 ↗
18. Maya-Johnson S, López D. Effect of the cooling rate in the corrosion behavior of a hot worked ti-6al-4v extra-low interstitial alloy. Mater Des. 2014;58:175–81. https://doi.org/10.1016/j.matdes.2014.01.024.10.1016/j.matdes.2014.01.024 ↗
19. Luo S, Yao J, Zou G, Li J, Jiang J, Yu F. Transformation characteristics of temperature and phases within ti-6al-4v aeroengine drum in hot forging and air cooling procedures. J Mater Res Technol. 2020;9(4):8235–44. https://doi.org/10.1016/j.jmrt.2020.05.096.10.1016/j.jmrt.2020.05.096 ↗
20. Luo S, Li J, Yu F. Numerical analysis of phase transformation characteristics in hot forging and subsequent air cooling processes of ti-6al-4v turbine blade. Int J Adv Manuf Technol. 2020;106:3–4. https://doi.org/10.1007/s00170-019-04802-y.10.1007/s00170-019-04802-y ↗
21. Dehghan-Manshadi A, Dippenaar RJ. Strain-induced phase transformation during thermo-mechanical processing of titanium alloys. Mater Sci Engineering: A. 2012;552:451–6. https://doi.org/10.1016/j.msea.2012.05.069.10.1016/j.msea.2012.05.069 ↗
22. Chandiran E, Nagata Y, Sun F, Miyamoto G, Furuhara T. Effect of deformation temperature, strain rate, and strain on the microstructure evolution of ti-17 alloy. Metall Mater Trans A-Phys Metall Mater Sci. 2021;52(7):3107–21. https://doi.org/10.1007/s11661-021-06305-6.10.1007/s11661-021-06305-6 ↗
23. Meng L, Kitashima T, Tsuchiyama T, Watanabe M. Β-texture evolution of a near-β titanium alloy during cooling after forging in the β single-phase and (α + β) dual-phase regions. Metall Mater Trans A-Phys Metall Mater Sci. 2021;52(1):303–15. https://doi.org/10.1007/s11661-020-06060-0.10.1007/s11661-020-06060-0 ↗
24. Dong Y, Liu X, Zou J, Ke Y, Liu P, Ma L, Luo H. Effect of cooling rate following β forging on texture evolution and variant selection during β → α transformation in ti-55511 alloy. J Mater Sci Technol. 2022;113:1–13. https://doi.org/10.1016/j.jmst.2021.09.011.10.1016/j.jmst.2021.09.011 ↗
25. Xiao Y, Lin YC, Jiang Y, Zhang X, Pang G, Wang D, Zhou K. A dislocation density-based model and processing maps of ti-55511 alloy with bimodal microstructures during hot compression in α + β region. Mater Sci Engineering: A. 2020;790:139692. https://doi.org/10.1016/j.msea.2020.139692.10.1016/j.msea.2020.139692 ↗
26. Liang H, Guo H, Nan Y, Qin C, Peng X, Zhang J. The construction of constitutive model and identification of dynamic softening mechanism of high-temperature deformation of ti–5al–5mo–5v–1cr–1fe alloy. Mater Sci Engineering: A. 2014;615:42–50. https://doi.org/10.1016/j.msea.2014.07.050.10.1016/j.msea.2014.07.050 ↗
27. Klimova M, Zherebtsov S, Salishchev G, Semiatin SL. Influence of deformation on the burgers orientation relationship between the α and β phases in ti–5al–5mo–5v–1cr–1fe. Mater Sci Engineering: A. 2015;645:292–7. https://doi.org/10.1016/j.msea.2015.08.008.10.1016/j.msea.2015.08.008 ↗
28. Salib M, Teixeira J, Germain L, Lamielle E, Gey N, Aeby-Gautier E. Influence of transformation temperature on microtexture formation associated with α precipitation at β grain boundaries in a β metastable titanium alloy. Acta Mater. 2013;61(10):3758–68. https://doi.org/10.1016/j.actamat.2013.03.007.10.1016/j.actamat.2013.03.007 ↗
29. Sun Z, Yin L. Study on bifurcation behavior and morphology of the secondary grain boundary α phase in TC18 titanium alloy. J Alloy Compd. 2022;901:163622. https://doi.org/10.1016/j.jallcom.2022.163622.10.1016/j.jallcom.2022.163622 ↗
30. Yang R, Zhao F, Liu Y, Shi K, Yin S. Effects of thermomechanical treatment on the evolution pattern of the α phase and mechanical properties of ti-17 alloy. Mater Today Commun. 2022;30:103041. https://doi.org/10.1016/j.mtcomm.2021.103041.10.1016/j.mtcomm.2021.103041 ↗
31. Hu S, Xiang S, Tan Y, Shi W, Zhang Y, Ji X, Ran Q. Synchronous enhancement of the strength and ductility in a metastable β-ti alloy by a new refined α phase mechanism. J Alloy Compd. 2022;922:166227. https://doi.org/10.1016/j.jallcom.2022.166227.10.1016/j.jallcom.2022.166227 ↗
32. Chen W, Lv Y, Zhang X, Chen C, Lin YC, Zhou K. Comparing the evolution and deformation mechanisms of lamellar and equiaxed microstructures in near β-ti alloys during hot deformation. Mater Sci Engineering: A. 2019;758:71–8. https://doi.org/10.1016/j.msea.2019.05.015.10.1016/j.msea.2019.05.015 ↗
33. Ateba Betanda Y, Helbert A, Brisset F, Mathon M, Waeckerlé T, Baudin T. Measurement of stored energy in fe–48%ni alloys strongly cold-rolled using three approaches: neutron diffraction, Dillamore and KAM approaches. Mater Sci Engineering: A. 2014;614:193–8. https://doi.org/10.1016/j.msea.2014.07.037.10.1016/j.msea.2014.07.037 ↗
34. Su G, Yun Z, Lin Y, He D, Zhang S, Chen Z. Microstructure evolution and a unified constitutive model of ti-55511 alloy compressed at stepped strain rates. Materials. 2021;14(22):6750. https://doi.org/10.3390/ma14226750.10.3390/ma14226750 ↗
35. Li Z, Ge J, Kong B, Luo D, Wang Z, Zhang X. Strain rate dependence and recrystallization modeling for TC18 alloy during post-deformation annealing. Materials. 2023;16(3):1140. https://doi.org/10.3390/ma16031140.10.3390/ma16031140 ↗
36. Han P, Wang K, Wang W, Ni L, Lin J, Xiang Y, Liu Q, Qiao K, Qiang F, Cai J. Microstructure evolution and mechanical properties of ti-15-3 alloy joint fabricated by submerged friction stir welding. Arch Civ Mech Eng. 2024;24(2). https://doi.org/10.1007/s43452-024-00877-x.10.1007/s43452-024-00877-x ↗
37. Tang X, Peng Q, Long J, Wang X, Lin Y, Deng L, Jin J, Gong P, Zhang M, Lee M. Recent progress on plastic forming of laminated metal composites: processes, heterogeneous deformation, and interfacial regulation. J Mater Sci Technol. 2025;229:67–91. https://doi.org/10.1016/j.jmst.2025.01.007.10.1016/j.jmst.2025.01.007 ↗
38. Du ZX, Xiao SL, Shen YP, Liu JS, Liu J, Xu LJ, Kong FT, Chen YY. Effect of hot rolling and heat treatment on microstructure and tensile properties of high strength beta titanium alloy sheets. Mater Sci Engineering: A. 2015;631:67–74. https://doi.org/10.1016/j.msea.2015.02.030.10.1016/j.msea.2015.02.030 ↗
39. Meng M, Fan XG, Chen YG, Guo HK, Guo LG, Zhan M. Assessment of alpha phase evolution in deformation of two-phase ti-alloys under the off-equilibrium condition. Mater Sci Engineering: A. 2018;738:389–98. https://doi.org/10.1016/j.msea.2018.09.084.10.1016/j.msea.2018.09.084 ↗
40. Semiatin SL, Zhang F, Larsen R, Chapman LA, Furrer DU. Precipitation in powder-metallurgy, nickel-base superalloys: review of modeling approach and formulation of engineering methods to determine input data. Integr Mater Manuf Innov. 2016;5(1):41–60. https://doi.org/10.1186/s40192-016-0046-3.10.1186/s40192-016-0046-3 ↗
41. Li T, Kent D, Sha G, Stephenson LT, Ceguerra AV, Ringer SP, Dargusch MS, Cairney JM. New insights into the phase transformations to isothermal ω and ω-assisted α in near β-ti alloys. Acta Mater. 2016;106:353–66. https://doi.org/10.1016/j.actamat.2015.12.046.10.1016/j.actamat.2015.12.046 ↗
42. Qi L, He S, Chen C, Jiang B, Hao Y, Ye H, Yang R, Du K. Diffusional-displacive transformation in a metastable β titanium alloy and its strengthening effect. Acta Mater. 2020;195:151–62. https://doi.org/10.1016/j.actamat.2020.05.058.10.1016/j.actamat.2020.05.058 ↗
43. Liu X, Li H, Zhan M, Zhang H. Quantitative characterization of lamellar α precipitation behavior of IMI834 ti-alloy in isothermal and non-isothermal heat treatments. Trans Nonferrous Met Soc China. 2022;32(1):162–74. https://doi.org/10.1016/S1003-6326(21)65785-0.10.1016/S1003-6326(21)65785-0 ↗
44. Meng M, Fan XG, Yang H, Guo LG, Zhan M, Gao PF. Precipitation of secondary alpha in competition with epitaxial growth of primary alpha in two-phase titanium alloys. J Alloy Compd. 2017;714:294–302. https://doi.org/10.1016/j.jallcom.2017.04.209.10.1016/j.jallcom.2017.04.209 ↗
45. Aaron HB, Fainstein D, Kotler GR. Diffusion-limited phase transformations: a comparison and critical evaluation of the mathematical approximations. J Appl Phys. 1970;41(11):4404–10. https://doi.org/10.1063/1.1658474.10.1063/1.1658474 ↗
46. Hao L, Sun C, Liang H, Wang C, Qian L, Han Q. Modeling of element diffusion behavior in bimetallic compound layer. Int J Mech Sci. 2025;290:110108. https://doi.org/10.1016/j.ijmecsci.2025.110108.10.1016/j.ijmecsci.2025.110108 ↗
47. Davis AE, Donoghue J, Kennedy JR, Byres N, Prangnell PB. In-situ observation of single variant α colony formation in ti-6al-4v. Acta Mater. 2021;220:117315. https://doi.org/10.1016/j.actamat.2021.117315.10.1016/j.actamat.2021.117315 ↗
48. Dong R, Kou H, Zhao Y, Zhang X, Yang L, Hou H. Morphology characteristics of α precipitates related to the crystal defects and the strain accommodation of variant selection in a metastable β titanium alloy. J Mater Sci Technol. 2021;95:1–9. https://doi.org/10.1016/j.jmst.2021.01.090.10.1016/j.jmst.2021.01.090 ↗
49. Zhang X, Kou H, Li J, Zhang F, Zhou L. Evolution of the secondary α phase morphologies during isothermal heat treatment in ti-7333 alloy. J Alloy Compd. 2013;577:516–22. https://doi.org/10.1016/j.jallcom.2013.06.180.10.1016/j.jallcom.2013.06.180 ↗
50. Hua K, Zhang Y, Kou H, Li J, Gan W, Fundenberger J, Esling C. Composite structure of α phase in metastable β Ti alloys induced by lattice strain during β to α phase transformation. Acta Mater. 2017;132:307–26. https://doi.org/10.1016/j.actamat.2017.04.051.10.1016/j.actamat.2017.04.051 ↗
51. Thoudden-Sukumar P, Kloenne Z, Das SM, Zheng Y, Fraser HL, Gault B, Antonov S. Mechanisms of grain boundary α precipitation in the metastable β-titanium ti-5al-5mo-5v-3cr. Acta Mater. 2024;272:119955. https://doi.org/10.1016/j.actamat.2024.119955.10.1016/j.actamat.2024.119955 ↗
52. Wang K, Li MQ. Effects of heat treatment and hot deformation on the secondary α phase evolution of TC8 titanium alloy. Mater Sci Engineering: A. 2014;613:209–16. https://doi.org/10.1016/j.msea.2014.06.056.10.1016/j.msea.2014.06.056 ↗
53. Qin D, Zhao F, Li Y. The conflicts between strength and ductility of bimodal ti-5553 alloy with fine equiaxial prior β grains. Mater Sci Engineering: A. 2022;841:143074. https://doi.org/10.1016/j.msea.2022.143074.10.1016/j.msea.2022.143074 ↗
54. Seshacharyulu T, Dutta B. Influence of prior deformation rate on the mechanism of β→α + β transformation in ti–6al–4v. Scr Mater. 2002;46(9):673–8. https://doi.org/10.1016/S1359-6462(02)00051-9.10.1016/S1359-6462(02)00051-9 ↗
55. Li D, Huang H, Chen C, Liu S, Liu X, Zhang X, Zhou K. Additive manufacturing of high strength near β titanium alloy ti-55511 by engineering nanoscale secondary α laths via in-situ heat treatment. Mater Sci Engineering: A. 2021;814:141245. https://doi.org/10.1016/j.msea.2021.141245.10.1016/j.msea.2021.141245 ↗
56. Qiu D, Shi R, Zhang D, Lu W, Wang Y. Variant selection by dislocations during α precipitation in α/β titanium alloys. Acta Mater. 2015;88:218–31. https://doi.org/10.1016/j.actamat.2014.12.044.10.1016/j.actamat.2014.12.044 ↗
57. Ma X, Xiang Z, Li T, Chen Y, Liu Y, Chen Z, Shu Q. Evolution laws of microstructures and mechanical properties during heat treatments for near-α high-temperature titanium alloys. Int J Min Metall Mater. 2022;29(8):1596–607. https://doi.org/10.1007/s12613-021-2248-8.10.1007/s12613-021-2248-8 ↗
58. Mecking H, Kocks UF, Hartig C. Taylor factors in materials with many deformation modes. Scr Mater. 1996;35(4):465–71. https://doi.org/10.1016/1359-6462(96)00137-6.10.1016/1359-6462(96)00137-6 ↗
59. Wu Y, Wu D, Ma J, Xiao W, Zheng K, Chen M. A physically based constitutive model of ti-6al-4 v and application in the SPF/DB process for a pyramid lattice sandwich panel. Arch Civ Mech Eng. 2021;21(3). https://doi.org/10.1007/s43452-021-00260-0.10.1007/s43452-021-00260-0 ↗
60. Lin YC, Huang J, Li H, Chen D. Phase transformation and constitutive models of a hot compressed TC18 titanium alloy in the α + β regime. Vacuum. 2018;157:83–91. https://doi.org/10.1016/j.vacuum.2018.08.020.10.1016/j.vacuum.2018.08.020 ↗
61. Wen H, Jin J, Tang X, Wang X, Yang H, Zhang Y, Zhang M, Deng L, Wei Q, Chen J, Ma X, Guo J. Machine learning-assisted constitutive modeling of a novel powder metallurgy Superalloy. Int J Mech Sci. 2023;260:108654. https://doi.org/10.1016/j.ijmecsci.2023.108654.10.1016/j.ijmecsci.2023.108654 ↗
62. Yang X, Wang B, Zhou J, Xiao W, Feng P. Constitutive modeling of softening mechanism and damage for ti–6al–4v alloy and its application in hot tensile simulation process. Arch Civ Mech Eng. 2021;21(2). https://doi.org/10.1007/s43452-021-00217-3.10.1007/s43452-021-00217-3 ↗
63. Grong Ø, Shercliff HR. Microstructural modelling in metals processing. Prog Mater Sci. 2002;47(2):163–282. https://doi.org/10.1016/S0079-6425(00)00004-9.10.1016/S0079-6425(00)00004-9 ↗
64. Katzarov I, Malinov S, Sha W. Finite element modeling of the morphology of β to α phase transformation in ti-6al-4v alloy. Metall Mater Trans A-Phys Metall Mater Sci. 2002;33(4):1027–40. https://doi.org/10.1007/s11661-002-0204-4.10.1007/s11661-002-0204-4 ↗