journal article·2026-01-23Open access

A comprehensive state-of-the-art review on energy-based procedures in earthquake-resistant structural design

Furkan Çalım, Ahmet Güllü, Ercan Yüksel

Abstract

Abstract Due to its several advantages over the conventional seismic design procedures, i.e., force-based and displacement-based, the energy-based seismic analysis and design procedures are anticipated to have the maturity to be included in the next-generation regulations and seismic design codes. However, extensive efforts are still required to reach a complete design methodology. This paper presents a comprehensive state-of-the-art review of the literature research on energy-based procedures in earthquake-resistant structural design. Starting with the earliest studies on the energy balance equations, it reviews the works carried out in the literature through the years in several categories, i.e., calculation of the seismic demands, development of the energy spectra, energy-based intensity measures, energy-based record selection and scaling, and energy-based structural design procedures. The reader will receive a complete review of energy-based analysis and design procedures in this paper, emphasizing unresolved issues and a list of existing research gaps.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Seismic Performance and Analysis · Vibration Control and Rheological Fluids · Aeroelasticity and Vibration Control

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. American Society of Civil Engineers. Minimum design loads and associated criteria for buildings and other structures. ASCE/SEI. Reston, VA, USA: ASCE; 2010. pp. 7–10.
2. Federal Emergency Management Agency. Prestandard and commentary for the seismic rehabilitation of buildings (FEMA 356). Washington, DC, USA: FEMA; 2000.
3. European Committee for Standardization. Eurocode 8: design of structures for earthquake Resistance – Part 1: general rules, seismic Actions, and rules for buildings (EN 1998-1). Brussels, Belgium: CEN; 2004.
4. Ministry of Interior, Disaster and Emergency Management Presidency. Turkish Building earthquake Code – 2018 (TBEC 2018). Türkiye: AFAD, Ankara; 2018.
5. Chou CC, Uang CM. Establishing absorbed energy spectra—an Attenuation approach. Earthq Eng Struct Dyn. 2000;29(10):1441–55. https://doi.org/10.1002/1096-9845(200010)29:10%3C1441::AID-EQE967%3E3.0.CO;2-E.10.1002/1096-9845(200010)29:10<1441::AID-EQE967>3.0.CO;2-E ↗
6. Chou CC, Uang CM. A procedure for evaluating seismic energy demand of framed structures. Earthq Eng Struct Dyn. 2003;32(2):229–44. https://doi.org/10.1002/eqe.221.10.1002/eqe.221 ↗
7. Hudson DE. (1956) Response spectrum techniques in engineering seismology. 1st World Conference on Earthquake Engineering, Earthquake Research Institute and University of California, Berkeley, California, USA.
8. Housner GW. (1956) Limit design of the structures to resist earthquakes. 1st World Conference on Earthquake Engineering, Earthquake Research Institute and University of California, Berkeley, California, USA.
9. Bravo-Haro MA, Elghazouli AY. Influence of earthquake duration on the response of steel moment frames. Soil Dyn Earthq Eng. 2018;115:634–51. https://doi.org/10.1016/j.soildyn.2018.08.027.10.1016/j.soildyn.2018.08.027 ↗
10. Liapopoulou M, Bravo-Haro MA, Elghazouli AY. The role of ground motion duration and pulse effects in the collapse of ductile systems. Earthq Eng Struct Dyn. 2020;49(11):1051–71. https://doi.org/10.1002/eqe.3278.10.1002/eqe.3278 ↗
11. Fardis MN. (2018) From force-to displacement-based seismic design of concrete structures and beyond. In: Pitilakis, K, editors Recent Advances in Earthquake Engineering in Europe, ECEE 2018, Geotechnical, Geological and Earthquake Engineering, vol 46, Springer Cham 101–122. https://doi.org/10.1007/978-3-319-75741-4_410.1007/978-3-319-75741-4_4 ↗
12. Gholami N, Garivani S, Askariani SS. State-of-the-art review of energy-based seismic design methods. Arch Comput Methods Eng. 2022;29(4):1965–96. https://doi.org/10.1007/s11831-021-09645-z.10.1007/s11831-021-09645-z ↗
13. SEAOC. Vision 2000: performance based seismic engineering of buildings. California: Structural Engineers Association of California, Sacramento; 1995.
14. BSL. The Building standard law of Japan. Japan: The Building Center of Japan. Tokyo; 2009.
15. Schmitt C. (2017) Using energy-based designs to enhance earthquake hazard resistance. MIT News. https://news.mit.edu/2017/using-energy-based-designs-to-enhance-earthquake-hazard-resistance-0810
16. Benavent-Climent A, Mollaioli F. (2021) Energy-Based Seismic Engineering, Proceedings of IWEBSE 2021. LNCE, vol 155, Springer Cham. https://doi.org/10.1007/978-3-030-73932-410.1007/978-3-030-73932-4 ↗
17. Varum H, Benavent-Climent A, Mollaioli F. (2023) Energy-Based Seismic Engineering, Proceedings of IWEBSE 2023. LNCE, vol 236, Springer Cham. https://doi.org/10.1007/978-3-031-36562-110.1007/978-3-031-36562-1 ↗
18. Dindar AA, Benavent-Climent A, Mollaioli F, Varum H. (2025) Energy-Based Seismic Engineering, Proceedings of IWEBSE 2025. LNCE, vol 692, Springer Cham. https://doi.org/10.1007/978-3-031-97129-710.1007/978-3-031-97129-7 ↗
19. Akiyama H. Earthquake-resistant limit-state design for buildings. University of Tokyo; 1985.
20. Uang C, Bertero VV. Evaluation of seismic energy in structures. Earthq Eng Struct Dyn. 1990;19(1):77–90. https://doi.org/10.1002/eqe.4290190108.10.1002/eqe.4290190108 ↗
21. Filiatrault A, Léger P, Tinawi R. On the computation of seismic energy in inelastic structures. Eng Struct. 1994;16(6):425–36. https://doi.org/10.1016/0141-0296(94)90057-4.10.1016/0141-0296(94)90057-4 ↗
22. Lee SS, Goel SC. (2001) Performance based design of steel moment frames using a target drift and yield mechanism. Research Rep. No. UMCEE 01–17, Dept. of Civil and Environmental Engineering, Univ. of Michigan.
23. Fajfar P, Vidic T, Fischinger M. Seismic demand in medium- and long‐period structures. Earthq Eng Struct Dyn. 1989;18(8):1133–44. https://doi.org/10.1002/eqe.4290180805.10.1002/eqe.4290180805 ↗
24. Manfredi G. Evaluation of seismic energy demand. Earthq Eng Struct Dyn. 2001;30(4):485–99. https://doi.org/10.1002/eqe.17. Portico.10.1002/eqe.17 ↗
25. Takewaki I. Frequency domain modal analysis of earthquake input energy to highly damped passive control structures. Earthq Eng Struct Dyn. 2004;33(5):575–90. https://doi.org/10.1002/eqe.361.10.1002/eqe.361 ↗
26. Gharehbaghi S, Gandomi AH, Achakpour S, Omidvar MN. A hybrid computational approach for seismic energy demand prediction. Expert Syst Appl. 2018;110:335–51. https://doi.org/10.1016/j.eswa.2018.06.009.10.1016/j.eswa.2018.06.009 ↗
27. Merter O. An investigation on the maximum earthquake input energy for elastic SDOF systems. Earthq Struct. 2019;16(4):487–99. https://doi.org/10.12989/eas.2019.16.4.487.10.12989/eas.2019.16.4.487 ↗
28. Güllü A, Yüksel E. Piecewise exact solution of the seismic energy balance equation and its verification by shake table tests. Arch Civ Mech Eng. 2022;22(3). https://doi.org/10.1007/s43452-022-00433-5.10.1007/s43452-022-00433-5 ↗
29. Ucar T. Computing input energy response of MDOF systems to actual ground motions based on modal contributions. Earthq Struct. 2020;18(2):263–73. https://doi.org/10.12989/eas.2020.18.2.263.10.12989/eas.2020.18.2.263 ↗
30. Kuwamura H, Galambos TV. Earthquake load for structural reliability. J Struct Eng. 1989;115(6):1446–62. https://doi.org/10.1061/(asce)0733-9445(. 1989)115:6(1446).10.1061/(asce)0733-9445( ↗
31. Fajfar P, Vidic T. Consistent inelastic design spectra: hysteretic and input energy. Earthq Eng Struct Dyn. 1994;23(5):523–37. https://doi.org/10.1002/eqe.4290230505.10.1002/eqe.4290230505 ↗
32. Lawson RS, Krawinkler H. (1995) Cumulative damage potential of seismic ground motion. In Proceedings of the 10th European Conference on Earthquake Engineering.
33. Akbas B. Energy-based earthquake resistant design of steel moment resisting frames. Illinois Institute of Technology; 1997.
34. Benavent-Climent A, Pujades LG, López‐Almansa F. Design energy input spectra for moderate‐seismicity regions. Earthq Eng Struct Dyn. 2002;31(5):1151–72. https://doi.org/10.1002/eqe.153.10.1002/eqe.153 ↗
35. Kunnath SK, Chai YH. Cumulative damage-based inelastic Cyclic demand spectrum. Earthq Eng Struct Dyn. 2003;33(4):499–520. https://doi.org/10.1002/eqe.363.10.1002/eqe.363 ↗
36. Khashaee P. Energy-based seismic design and damage assessment for structures. Southern Methodist University; 2005.
37. Akbas B, Shen J, Temiz H. Identifying the hysteretic energy demand and distribution in regular steel frames. Steel Compos Struct. 2006;6(6):479–91. https://doi.org/10.12989/scs.2006.6.6.479.10.12989/scs.2006.6.6.479 ↗
38. Choi H, Kim J. Evaluation of seismic energy demand and its application on design of buckling-restrained braced frames. Struct Eng Mech. 2009;31(1):93–112. https://doi.org/10.12989/sem.2009.31.1.093.10.12989/sem.2009.31.1.093 ↗
39. Ye L, Cheng G, Qu Z, Lu X. (2009) Study on energy-based seismic design method and application on steel braced frame structures. Sixth International Conference on Urban Earthquake Engineering, Tokyo Institute of Technology, Tokyo, Japan.
40. Arroyo D, Ordaz M. On the Estimation of hysteretic energy demands for SDOF systems. Earthq Eng Struct Dyn. 2007;36(15):2365–82. https://doi.org/10.1002/eqe.736.10.1002/eqe.736 ↗
41. Zhai C, Ji D, Wen W, Li C, Lei W, Xie L. Hysteretic energy prediction method for mainshock-aftershock sequences. Earthq Eng Eng Vib. 2018;17(2):277–91. https://doi.org/10.1007/s11803-018-0441-1.10.1007/s11803-018-0441-1 ↗
42. Akbas B. A neural network model to assess the hysteretic energy demand in steel moment resisting frames. Struct Eng Mech. 2006;23(2):177–93. https://doi.org/10.12989/sem.2006.23.2.177.10.12989/sem.2006.23.2.177 ↗
43. Gandomi AH, Alavi AH, Asghari A, Niroomand H, Nazar AM. An innovative approach for modeling of hysteretic energy demand in steel moment resisting frames. Neural Comput Appl. 2013;24(6):1285–91. https://doi.org/10.1007/s00521-013-1342-x.10.1007/s00521-013-1342-x ↗
44. Benavent-Climent A, Zahran R. An energy based procedure for the assessment of seismic capacity of existing frames: application to RC wide beam systems in Spain. Soil Dyn Earthq Eng. 2010;30(5):354–67. https://doi.org/10.1016/j.soildyn.2009.12.008.10.1016/j.soildyn.2009.12.008 ↗
45. Deger ZT, Sutcu F. (2017) Evaluation of earthquake input energy distribution in an RC building for an energy-based seismic design approach. 16th World Conference on Earthquake Engineering, The Chilean Association of Seismology and Earthquake Engineering, Santiago, Chile.
46. Guan M, Du H. Energy-based seismic performance of reinforced concrete frame structures. Mag Concr Res. 2013;65(8):494–505. https://doi.org/10.1680/macr.12.00149.10.1680/macr.12.00149 ↗
47. Akbas B, Shen J, Hao H. Energy appproach in peformance-based seismic design of steel moment resisting frames for basic safety objective. Struct Des Tall Build. 2001;10(3):193–217. https://doi.org/10.1002/tal.172.10.1002/tal.172 ↗
48. Wang F, Yi T. A methodology for estimating seismic hysteretic energy of buildings. Civ Eng Urban Plan. 2012;2012:17–21. https://doi.org/10.1061/9780784412435.004.10.1061/9780784412435.004 ↗
49. Mezgebo MG. (2015) Estimation of earthquake input energy, hysteretic energy and its distribution in MDOF structures (Doctoral dissertation). Syracuse University, New York, USA.
50. Tu BB, Zhao D. Distribution of accumulated irrecoverable hysteretic energy in MDOF structures. Multidiscip Model Mater Struct. 2017;14(2):202–15. https://doi.org/10.1108/mmms-05-2017-0028.10.1108/mmms-05-2017-0028 ↗
51. Gholami N, Garivani S, Askariani SS, Hajirasouliha I. Estimation of hysteretic energy distribution for energy-based design of structures equipped with dampers. J Build Eng. 2022;51:104221. https://doi.org/10.1016/j.jobe.2022.104221.10.1016/j.jobe.2022.104221 ↗
52. UBC97. (1997) Structural engineering design provisions. International Conference of Building Officials. Whittier, California.
53. ASCE/SEI 7–16. Minimum design loads for buildings and other structures. American Society of Civil Engineers. Reston, VA; 2016.
54. Balun B. The influence of ground motion duration on the energy based assessment of buildings with infill walls. Struct. 2023;49:765–78. https://doi.org/10.1016/j.istruc.2023.02.011.10.1016/j.istruc.2023.02.011 ↗
55. Erberik MA, Azizi M. (2021) Spatial distribution of hysteretic energy in reinforced concrete moment resisting frames. In: Benavent-Climent A, Mollaioli F, editors IWEBSE 2021. LNCE, vol 155, Springer Cham 47–62. https://doi.org/10.1007/978-3-030-73932-4_410.1007/978-3-030-73932-4_4 ↗
56. Çalım F, Güllü A, Yüksel E. Seismic hysteretic energy distribution in the members of multi-story steel moment-resisting frames resting on stiff soils. J Earthq Tsun. 2024. https://doi.org/10.1142/S1793431125500204.10.1142/S1793431125500204 ↗
57. Alıcı FC, Sucuoğlu H. (2023) Predicting the distribution of hysteretic energy demand in frame members. In: Varum H, Benavent-Climent A, Mollaioli F, editors IWEBSE 2023. LNCE, vol 236, Springer Cham 1–13. https://doi.org/10.1007/978-3-031-36562-1_110.1007/978-3-031-36562-1_1 ↗
58. Leelataviwat S, Goel SC, Stojadinović B. (2002) Energy-based seismic design of structures using yield mechanism and target drift. J Struct Eng 128(8):1046–1054. https://doi.org/10.1061/(asce)0733-9445(2002)128:8(1046).10.1061/(asce)0733-9445 ↗
59. Leelataviwat S, Saewon W, Goel SC. Application of energy balance concept in seismic evaluation of structures. J Struct Eng. 2009;135(2):113–21. https://doi.org/10.1061/(asce)0733-. 9445(2009)135:2(113).10.1061/(asce)0733 ↗
60. Benavent-Climent A. An energy-based method for seismic retrofit of existing frames using hysteretic dampers. Soil Dyn Earthq Eng. 2011;31(10):1385–96. https://doi.org/10.1016/j.soildyn.2011.05.015.10.1016/j.soildyn.2011.05.015 ↗
61. Khampanit A, Leelataviwat S, Kochanin J, Warnitchai P. Energy-based seismic strengthening design of non-ductile reinforced concrete frames using buckling-restrained braces. Eng Struct. 2014;81:110–22. https://doi.org/10.1016/j.engstruct.2014.09.033.10.1016/j.engstruct.2014.09.033 ↗
62. Reggio A, Angelis MD. Optimal energy-based seismic design of non-conventional tuned mass damper (TMD) implemented via inter-story isolation. Earthq Eng Struct Dyn. 2015;44(10):1623–42. https://doi.org/10.1002/eqe.2548.10.1002/eqe.2548 ↗
63. Merter O, Ucar T, Duzgun M. Determination of earthquake safety of RC frame structures using an energy-based approach. Comput Concr. 2017;19(6):689–99. https://doi.org/10.12989/cac.2017.19.6.689.10.12989/cac.2017.19.6.689 ↗
64. Erberik MA, Sucuoğlu H, Acun B. Inelastic displacement response of RC systems with Cyclic deterioration - an energy approach. J Earthq Eng. 2012;16(7):937–62. https://doi.org/10.1080/13632469.2012.685210.10.1080/13632469.2012.685210 ↗
65. Mollaioli F, Bruno S, Decanini L, Saragoni R. Correlations between energy and displacement demands for performance-based seismic engineering. Pure Appl Geophys. 2011;168(1–2):237–59. https://doi.org/10.1007/s00024-010-0118-9.10.1007/s00024-010-0118-9 ↗
66. Manoukas G, Athanatopoulou A, Avramidis I. Static pushover analysis based on an energy-equivalent SDOF system. Earthq Spectra. 2011;27(1):89–105. https://doi.org/10.1193/1.3535597.10.1193/1.3535597 ↗
67. D’Ambrisi A, Mezzi M. An energy-based approach for nonlinear static analysis of structures. Bull Earthq Eng. 2015;13:1513–30. https://doi.org/10.1007/s10518-014-9673-2.10.1007/s10518-014-9673-2 ↗
68. Güllü A, Çalım F, Yüksel E. Estimation of the story response parameters through the seismic input energy for moment-resisting frames. Soil Dyn Earthq Eng. 2023;164:107636. https://doi.org/10.1016/j.soildyn.2022.107636.10.1016/j.soildyn.2022.107636 ↗
69. Güllü A, Çalım F, Yüksel E. (2024) Corrigendum to Estimation of the story response parameters through the seismic input energy for moment-resisting frames [Soil Dynam Earthq Eng 164 (2023) 107636]. Soil Dyn Earthq Eng 178:108455. https://doi.org/10.1016/j.soildyn.2024.10845510.1016/j.soildyn.2024.108455 ↗
70. Fujii K, Shioda M. Energy-based prediction of the peak and cumulative response of a reinforced concrete Building with steel damper columns. Preprints 2023010064. 2023. https://doi.org/10.20944/preprints202301.0064.v1.10.20944/preprints202301.0064.v1 ↗
71. Vidic T, Fajfar P, Fischinger M. Consistent inelastic design spectra: strength and displacement. Earthq Eng Struct Dyn. 1994;23(5):507–21. https://doi.org/10.1002/eqe.4290230504.10.1002/eqe.4290230504 ↗
72. Bertero VV, Uang CM. Implications of recorded earthquake ground motions on seismic design of Building structures. Earthquake Engineering Research Report UCB/EERC-88‐13, University of California Berkeley, C.A; 1988.
73. Bruneau M, Wang N. Some aspects of energy methods for the inelastic seismic response of ductile SDOF structures. Eng Struct. 1996;18(1):1–12. https://doi.org/10.1016/0141-0296(95)00099-x.10.1016/0141-0296(95)00099-x ↗
74. Zahrah TF, Hall WJ. Earthquake energy absorption in SDOF systems. J Struct Eng. 1998;128(3):308–17. https://doi.org/10.1061/(asce)0733-9445. (1984)110:8(1757).10.1061/(asce)0733-9445 ↗
75. Khashaee P, Mohraz B, Sadek F, Lew HS, Gross LJ. (2003) Distribution of earthquake input energy in structures. Research Report NISTIR 6903, National Institute of Standard and Technology.10.6028/NIST.IR.6903 ↗
76. Decanini LD, Mollaioli F. An energy-based methodology for the assessment of seismic demand. Soil Dyn Earthq Eng. 2001;21(2):113–37. https://doi.org/10.1016/s0267-7261(00)00102-0.10.1016/s0267-7261(00)00102-0 ↗
77. Ordaz M, Huerta B, Reinoso E. Exact computation of input-energy spectra from fourier amplitude spectra. Earthq Eng Struct Dyn. 2003;32(4):597–605. https://doi.org/10.1002/eqe.240.10.1002/eqe.240 ↗
78. López-Almansa F, Yazgan AU, Benavent-Climent A. Design energy input spectra for high seismicity regions based on Turkish registers. Bull Earthq Eng. 2013;11(4):885–912. https://doi.org/10.1007/s10518-012-9415-2.10.1007/s10518-012-9415-2 ↗
79. Cheng Y, Lucchini A, Mollaioli F. Proposal of new ground-motion prediction equations for elastic input energy spectra. Earthq Struct. 2014;7(4):485–510. https://doi.org/10.12989/eas.2014.7.4.485.10.12989/eas.2014.7.4.485 ↗
80. Dindar AA, Yalçın C, Yüksel E, Özkaynak H, Büyüköztürk O. Development of earthquake energy demand spectra. Earthq Spectra. 2015;31(3):1667–89. https://doi.org/10.1193/011212eqs010m.10.1193/011212eqs010m ↗
81. Dindar AA, Polat G, Yalçın C, Yüksel E, Özkaynak H, Büyüköztürk O. (2021). Assessment of plastic energy demand spectra on frame systems. In: Benavent-Climent A, Mollaioli F, editors IWEBSE 2021. LNCE, vol 155, Springer Cham 1–10. https://doi.org/10.1007/978-3-030-73932-4_110.1007/978-3-030-73932-4_1 ↗
82. Alıcı FS, Sucuoğlu H. Prediction of input energy spectrum: Attenuation models and velocity spectrum scaling. Earthq Eng Struct Dyn. 2016;45(13):2137–61. https://doi.org/10.1002/eqe.2749.10.1002/eqe.2749 ↗
83. Mezgebo MG, Lui EM. Hysteresis and soil site dependent input and hysteretic energy spectra for far-source ground motions. Adv Civ Eng. 2016;2016:1–29. https://doi.org/10.1155/2016/1548319.10.1155/2016/1548319 ↗
84. Mezgebo MG, Lui EM. A new methodology for energy-based seismic design of steel moment frames. Earthq Eng Eng Vib. 2017;16(1):131–52. https://doi.org/10.1007/s11803-017-0373-1.10.1007/s11803-017-0373-1 ↗
85. Güllü A, Yüksel E, Yalçın C, Dindar AA, Özkaynak H, Büyüköztürk O. An improved input energy spectrum verified by the shake table tests. Earthq Eng Struct Dyn. 2019;48(1):27–45. https://doi.org/10.1002/eqe.3121.10.1002/eqe.3121 ↗
86. Börekçi H, Yalçın C, Yüksel E. Experimental verification of inelastic energy demand spectrum using SDOF steel specimens on shaking table. Gulf Conf Sustainable Built Environ. 2020;253–259. https://doi.org/10.1007/978-3-030-39734-0_14.10.1007/978-3-030-39734-0_14 ↗
87. Zhou Y, Song G, Huang S, Wu H. Input energy spectra for self-centering SDOF systems. Soil Dyn Earthq Eng. 2019;121:293–305. https://doi.org/10.1016/j.soildyn.2019.03.017.10.1016/j.soildyn.2019.03.017 ↗
88. Du B, He Z, Wu Y, Huang G, Pan F. A compatible energy demand estimate considering code-specified design spectra. Soil Dyn Earthq Eng. 2020;137:106273. https://doi.org/10.1016/j.soildyn.2020.106273.10.1016/j.soildyn.2020.106273 ↗
89. Ucar T, Merter O. (2021) Effect of kinematic hardening and ductility ratio on inelastic input energy spectra of near-fault ground motions. In: Benavent-Climent A, Mollaioli F, editors IWEBSE 2021. LNCE, vol 155, Springer Cham 1–10. https://doi.org/10.1007/978-3-030-73932-4_910.1007/978-3-030-73932-4_9 ↗
90. Çalım F, Güllü A, Yüksel E. Comparison of various input energy spectra for the February 6th, 2023, Kahramanmaraş earthquake sequence. J Earthq Eng. 2024;1–20. https://doi.org/10.1080/13632469.2024.2336202.10.1080/13632469.2024.2336202 ↗
91. Arias A. (1970) A measure of earthquake intensity. Seismic design for nuclear plants 438–483.
92. Park Y, Ang AHS, Wen YK. Seismic damage analysis of reinforced concrete buildings. J Struct Eng. 1985;111(4):740–57. https://doi.org/10.1061/(asce)0733-9445(1985)111.10.1061/(asce)0733-9445(1985)111 ↗
93. EPRI NP-5930. A criterion for determining exceedence of the operating basis earthquake. Palo Alto, CA: Electrical Power Research Institute, EPRI; 1998.
94. Riddell R, Garcia JE. Hysteretic energy spectrum and damage control. Earthq Eng Struct Dyn. 2001;30(12):1791–816. https://doi.org/10.1002/eqe.93.10.1002/eqe.93 ↗
95. Anderson JC, Bertero VV. Uncertainties in Establishing design earthquakes. J Struct Eng. 1987;113(8):1709–24. https://doi.org/10.1061/(asce)0733-. 9445(1987)113:8(1709).10.1061/(asce)0733 ↗
96. Fajfar P, Vidic T, Fischinger M. A measure of earthquake motion capacity to damage medium-period structures. Soil Dyn Earthq Eng. 1990;9(5):236–42. https://doi.org/10.1016/s0267-7261(05)80002-8.10.1016/s0267-7261(05)80002-8 ↗
97. Mackie K, Stojadinovic B. (2003) Seismic demands for performance-based design of bridges. PEER Report. http://peer.berkeley.edu/publications/peer_reports/reports_2003/reports_2003.html
98. Housner GW. (1952) Spectrum intensities of strong-motion earthquakes.
99. Ebrahimian H, Jalayer F, Lucchini A, Mollaioli F, Manfredi G. Preliminary ranking of alternative scalar and vector intensity measures of ground shaking. Bull Earthq Eng. 2015;13(10):2805–40. https://doi.org/10.1007/s10518-015-9755-9.10.1007/s10518-015-9755-9 ↗
100. Sari A, Manuel L. (2007) Correlation of structural performance with energy- and strength-based parameters. Sixth National Conference on Earthquake Engineering. Istanbul, Türkiye.