Optimizing FAST/SPS parameters for ultra-high SiC content Al–SiC composites: thermal performance and microstructural insights
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Hong Y, Wang WJ, Liu JQ, Tang WM, Wu YC. Effect of porosity and interface structures on thermal and mechanical properties of SiC/6061Al composites with high volume fraction of SiC. Trans Nonferrous Met Soc China. 2019;29:941–9. https://doi.org/10.1016/S1003-6326(19)65003-X.10.1016/S1003-6326(19)65003-X ↗
2. Manohar G, Pandey KM, Maity SR. Effect of sintering mechanisms on mechanical properties of AA7075/B4C composite fabricated by powder metallurgy techniques. Ceram Int. 2021;47:15147–54. https://doi.org/10.1016/j.ceramint.2021.02.073.10.1016/j.ceramint.2021.02.073 ↗
3. Guo BS, Chen B, Zhang XM, Cen X, Wang XH, Song M, et al. Exploring the size effects of Al₄C₃ on the mechanical properties and thermal behaviors of Al-based composites reinforced by SiC and carbon nanotubes. Carbon. 2018;135:224–35. https://doi.org/10.1016/j.carbon.2018.04.048.10.1016/j.carbon.2018.04.048 ↗
4. Akbarpour MR, Gazani F, Mirabad HM, Khezri I, Moeini A, Sohrabi N, Kim HS. Recent advances in processing, and mechanical, thermal, and electrical properties of Cu-SiC metal matrix composites prepared by powder metallurgy. Prog Mater Sci. 2023;140:101191. https://doi.org/10.1016/j.pmatsci.2023.101191.10.1016/j.pmatsci.2023.101191 ↗
5. Hogg SC, Lambourne A, Ogilvy A, Grant PS. Microstructural characterisation of spray formed Si-30Al for thermal management applications. Scr Mater. 2006;55:111–4. https://doi.org/10.1016/j.scriptamat.2006.02.051.10.1016/j.scriptamat.2006.02.051 ↗
6. Vetterli M, Tavangar R, Weber L. Influence of the elastic properties of the phases on the coefficient of thermal expansion of a metal matrix composite. Scr Mater. 2011;64:153–6. https://doi.org/10.1016/j.scriptamat.2010.09.032.10.1016/j.scriptamat.2010.09.032 ↗
7. Zhang Q, Wu G, Chen G, Jiang L, Luan B. The thermal expansion and mechanical properties of high reinforcement content SiCp/Al composites fabricated by squeeze casting technology. Compos Part A. 2003;34:1023–7. https://doi.org/10.1016/S1359-835X(03)00253-7.10.1016/S1359-835X(03)00253-7 ↗
8. Nam TH, Requena G, Degischer P. Thermal expansion behaviour of aluminum matrix composites with densely packed SiC particles. Compos Part A. 2008;39:856–65. https://doi.org/10.1016/j.compositesa.2008.01.011.10.1016/j.compositesa.2008.01.011 ↗
9. Huang Y, Chen G, Wang B, Zhang J, Tang W. Fabrication, microstructure and properties of the mid-fraction SiC particles/6061Al composites using an optimized powder metallurgy technique. Russ J Non-Ferrous Met. 2019;60:312–8. https://doi.org/10.3103/S1067821219030076.10.3103/S1067821219030076 ↗
10. Teng F, Yu K, Luo J, Fang HJ, Shi CL, Dai YL, Xiong HQ. Microstructures and properties of Al–50%SiC composites for electronic packaging applications. Trans Nonferrous Met Soc China. 2016;26:780–9. https://doi.org/10.1016/S1003-6326(16)64358-3.10.1016/S1003-6326(16)64358-3 ↗
11. Qu SG, Lou HS, Li XQ, Kuang TR, Lou JY. Effect of heat-treatment on stress relief and dimensional stability behavior of SiCp/Al composite with high SiC content. Mater Des. 2015;86:508–15. https://doi.org/10.1016/j.matdes.2015.07.044.10.1016/j.matdes.2015.07.044 ↗
12. Sun J, Chen G, Wang B, Chen G, Tang W. Fabrication, microstructures, and properties of 50 vol.% SiCp/6061Al composites via hot pressing. J Mater Eng Perform. 2019;28:2697–706. https://doi.org/10.1007/s11665-019-04071-6.10.1007/s11665-019-04071-6 ↗
13. Huber T, Degischer HP, Lefranc G, Schmitt T. Thermal expansion studies on aluminium-matrix composites with different reinforcement architecture of SiC particles. Compos Sci Technol. 2006;66:2206–17. https://doi.org/10.1016/j.compscitech.2005.12.012.10.1016/j.compscitech.2005.12.012 ↗
14. Cong XS, Shen P, Wang Y, Jiang QC. Wetting of polycrystalline SiC by molten al and al-Si alloys. Appl Surf Sci. 2014;317:140–6. https://doi.org/10.1016/j.apsusc.2014.08.055.10.1016/j.apsusc.2014.08.055 ↗
15. Liu Q, Wang F, Shen W, Qiu X, He Z, Zhang Q, Xie Z. Influence of interface thermal resistance on thermal conductivity of SiC/Al composites. Ceram Int. 2019;45:23815–9. https://doi.org/10.1016/j.ceramint.2019.07.358.10.1016/j.ceramint.2019.07.358 ↗
16. Mao XZ, Hong Y, Wang BH, Liu JW, Zhang YJ, Feng D, Yang L, Shi CD, Wu YC, Tang WM. Fabrication, microstructures and properties of 50 vol.% SiC/6061Al composites via a pressureless sintering technique. Powder Metall. 2018;61:1–9. https://doi.org/10.1080/00325899.2017.1364895.10.1080/00325899.2017.1364895 ↗
17. Li Y, Wang Z, Guo ZC. Preparation of SiC/Al composite material by supergravity infiltration method and its properties. Ceram Int. 2024;50:28025–36. https://doi.org/10.1016/j.ceramint.2024.05.100.10.1016/j.ceramint.2024.05.100 ↗
18. Shanmuga Priyan VG, Kanmani S. Effect of ultrasonic treatment during stir casting on mechanical properties of AA6063-SiC composites. Mater Chem Phys. 2023;294:126977. https://doi.org/10.1016/j.matchemphys.2022.126977.10.1016/j.matchemphys.2022.126977 ↗
19. Mizuuchi K, Inoue K, Agari Y, Nagaoka T, Sugioka M, Tanaka M, Takeuchi T, Tani J, Kawahara M, Makino Y, Ito M. Processing of Al/SiC composites in continuous solid – liquid co-existent state by SPS and their thermal properties. Compos Part B Eng. 2012;43:2012–9. https://doi.org/10.1016/j.compositesb.2012.02.004.10.1016/j.compositesb.2012.02.004 ↗
20. Dash K, Chaira D, Ray BC. Synthesis and characterization of aluminium – alumina micro- and nano-composites by spark plasma sintering. Mater Res Bull. 2013;48:2535–42. https://doi.org/10.1016/j.materresbull.2013.03.014.10.1016/j.materresbull.2013.03.014 ↗
21. Eldesouky A, Johnsson M, Svengren H, Attallah MM, Salem HG. Effect of grain size reduction of AA2124 aluminum alloy powder compacted by spark plasma sintering. J Alloys Compd. 2014;609:215–21. https://doi.org/10.1016/j.jallcom.2014.04.136.10.1016/j.jallcom.2014.04.136 ↗
22. Wu CD, Fang P, Luo GQ, Chen F, Shen Q, Zhang LM, Enrique JL. Effect of plasma activated sintering parameters on microstructure and mechanical properties of Al – 7075/B₄C composites. J Alloys Compd. 2014;615:276–82. https://doi.org/10.1016/j.jallcom.2014.06.110.10.1016/j.jallcom.2014.06.110 ↗
23. Guillon O, Gonzalez-Julian J, Dargatz B, et al. Field-assisted sintering technology/spark plasma sintering: Mechanisms, materials, and technology developments. Adv Eng Mater. 2014;16:830–49. https://doi.org/10.1002/adem.201300409.10.1002/adem.201300409 ↗
24. Ratzker B, Sokol M. Exploring the capabilities of high-pressure spark plasma sintering (HPSPS): A review of materials processing and properties. Mater Des. 2023;233:112238. https://doi.org/10.1016/j.matdes.2023.112238.10.1016/j.matdes.2023.112238 ↗
25. Aliyu IK, Saheb N, Hassan SF, Al-Aqeeli N. Microstructure and properties of spark plasma sintered aluminum containing 1 wt.% SiC nanoparticles. Metals. 2015;5:70–83. https://doi.org/10.3390/met5010070.10.3390/met5010070 ↗
26. Boldin MS, Popov AA, Lantsev EA, Nokhrin AV. Chuvil’deev V.N. Investigation of the densification behavior of alumina during spark plasma sintering. Mater. 2022;15:2167. https://doi.org/10.3390/ma15062167.10.3390/ma15062167 ↗
27. Garbiec D, Jurczyk M. Al-SiC composites synthesized by the spark plasma sintering method (SPS). Compos Theory Pract. 2013;13:255–9.
28. Guillard F, Allemand A, Lulewicz JD, Galy J. Densification of SiC by SPS-effects of time, temperature and pressure. J Eur Ceram Soc. 2007;27:2725–8. https://doi.org/10.1016/j.jeurceramsoc.2006.10.005.10.1016/j.jeurceramsoc.2006.10.005 ↗
29. Bousser E, Rogov A, Shashkov P, Gholinia A, Laugel N, Slater TJA, Withers PJ, Matthews A, Yerokhin A. Phase transitions in alumina films during post-sparking anodising of al alloys. Acta Mater. 2023;244:118587. https://doi.org/10.1016/j.actamat.2022.118587.10.1016/j.actamat.2022.118587 ↗
30. Oliveira M, Agathopoulos S, Ferreira JMF. Reactions at the interface between Al₂O₃–SiO₂ ceramics with additives of alkaline-earth oxides and liquid Al–Si alloy. J Mater Res. 2002;17:641–7. https://doi.org/10.1557/JMR.2002.0091.10.1557/JMR.2002.0091 ↗
31. Kim RN, Yun HW, Lee J, Kim W-B. Dipole formation and electrical properties according to SiO₂ layer thickness at an Al₂O₃/SiO₂ interface. J Phys Chem C. 2021;125(26):14486–92. https://doi.org/10.1021/acs.jpcc.1c03730.10.1021/acs.jpcc.1c03730 ↗
32. Leszczyńska-Madej B, Madej M, Wąsik A, et al. Spark plasma sintering of Al–SiC composites with high SiC content: study of microstructure and tribological properties. Arch Civ Mech Eng. 2023;23:229. https://doi.org/10.1007/s43452-023-00771-y.10.1007/s43452-023-00771-y ↗
33. Kong Z, Wang Z, Li Y, Li R. Effect of spark plasma sintering temperature on the microstructure and thermophysical properties of high-silicon–aluminum composites. Coatings. 2024;14:299. https://doi.org/10.3390/coatings14030299.10.3390/coatings14030299 ↗
34. Eklund P, Andersson M, Högberg H, Hultman L. Thermal stability and phase transformations of γ-/amorphous-Al₂O₃ thin films. Plasma Process Polym. 2009;6(S1):S907–11. https://doi.org/10.1002/ppap.200932301.10.1002/ppap.200932301 ↗
35. Matijošius M, Vaitkus R, Vasiliauskas A, Griškevičius M. Possibility of phase transformation of Al₂O₃ by a laser: a review. Crystals. 2024;14(5):415. https://doi.org/10.3390/cryst14050415.10.3390/cryst14050415 ↗
36. Neumeier J.J., Shvyd’ko Yu.V., Haskel D. Thermal expansion of 4H and 6H SiC from 5 K to 340 K. J Phys Chem Solids. 2024;111860. https://doi.org/10.1016/j.jpcs.2023.111860.10.1016/j.jpcs.2023.111860 ↗
37. Hidnert P, Krider JF. Thermal expansion of aluminum and some aluminum alloys. J Res Natl Bur Stand. 1952;48(3):209–16.10.6028/jres.048.030 ↗
38. Lai L, Niu B, Bi Y, Li Y, Yang Z. Advancements in SiC-reinforced metal matrix composites for high-performance electronic packaging: a review of thermo-mechanical properties and future trends. Micromachines. 2023;14:1491. https://doi.org/10.3390/mi14081491.10.3390/mi14081491 ↗
39. Molina JM, Narciso J, Weber L, Mortensen A, Louis E. Thermal conductivity of Al–SiC composites with monomodal and bimodal particle size distribution. Mater Sci Eng A. 2008;480:483–8. https://doi.org/10.1016/j.msea.2007.07.026.10.1016/j.msea.2007.07.026 ↗
40. Fathy A, Sadoun A, Abdelhameed M. Effect of matrix/reinforcement particle size ratio (PSR) on the mechanical properties of extruded Al–SiC composites. Int J Adv Manuf Technol. 2014;73:1049–56. https://doi.org/10.1007/s00170-014-5901-9.10.1007/s00170-014-5901-9 ↗
41. Bedir F. Characteristic properties of Al-Cu-SiCp and Al-Cu-B4Cp composites produced by hot pressing method under nitrogen atmosphere. Mater Des. 2007;28:1238–44. https://doi.org/10.1016/j.matdes.2006.01.003.10.1016/j.matdes.2006.01.003 ↗
42. Han J, Li Y, Ma C, et al. Study on the oxidation mechanism of Al-SiC composite at elevated temperature. Int J Min Metall Mater. 2024;31:2077–87. https://doi.org/10.1007/s12613-023-2778-3.10.1007/s12613-023-2778-3 ↗
43. Sharma SK, Saxena KK, Kumar N. Effect of SiC on mechanical properties of Al-based metal matrix composites produced by stir casting. Met Sci Heat Treat. 2022;64:316–20. https://doi.org/10.1007/s11041-022-00807-9.10.1007/s11041-022-00807-9 ↗
44. Akbari E, Ghassemi Kakroudi M, Shahedifar V, Ghiasi H. The influence of different SiC amounts on the microstructure, densification, and mechanical properties of hot-pressed Al₂O₃-SiC composites. Int J Appl Ceram Technol. 2020;17:491–500. https://doi.org/10.1111/ijac.13406.10.1111/ijac.13406 ↗
45. Li XP, Liu CY, Ma MZ, Liu RP. Microstructures and mechanical properties of AA6061–SiC composites prepared through spark plasma sintering and hot rolling. Mater Sci Eng. 2016;650:139–44. https://doi.org/10.1016/j.msea.2015.10.015.10.1016/j.msea.2015.10.015 ↗
46. Baud S, Thévenot F, Pisch A, Chatillon C. High temperature sintering of SiC with oxide additives: I. Analysis in the SiC–Al₂O₃ and SiC–Al₂O₃–Y₂O₃ systems. J Eur Ceram Soc. 2003;23:1–8. https://doi.org/10.1016/S0955-2219(02)00067-5.10.1016/S0955-2219(02)00067-5 ↗
47. Ureña A, Martínez E, Rodrigo P, Gil L. Oxidation treatments for SiC particles used as reinforcement in aluminium matrix composites. Compos Sci Technol. 2004;64:1843–54. https://doi.org/10.1016/j.compscitech.2004.01.010.10.1016/j.compscitech.2004.01.010 ↗
48. Tham L, Gupta M, Cheng L. Effect of limited matrix–reinforcement interfacial reaction on enhancing the mechanical properties of aluminium–silicon carbide composites. Acta Mater. 2001;49:3243–53. https://doi.org/10.1016/S1359-6454(01)00221-X.10.1016/S1359-6454(01)00221-X ↗
49. Ureña A, Escalera M, Gil L. Oxidation barriers on SiC particles for use in aluminium matrix composites manufactured by casting route: mechanisms of interfacial protection. J Mater Sci. 2002;37:4633–43. https://doi.org/10.1023/A:1020612819045.10.1023/A:1020612819045 ↗
50. Rodríguez-Reyes M, Pech-Canul MI, Rendón-Angeles JC, López-Cuevas J. Limiting the development of Al₄C₃ to prevent degradation of Al/SiCₚ composites processed by pressureless infiltration. Compos Sci Technol. 2006;66:1056–62. https://doi.org/10.1016/j.compscitech.2005.07.025.10.1016/j.compscitech.2005.07.025 ↗
51. Leszczyńska-Madej B, Garbiec D, Madej M. Effect of sintering temperature on microstructure and selected properties of spark plasma sintered Al-SiC composites. Vacuum. 2019;165:250–5. https://doi.org/10.1016/j.vacuum.2019.03.033.10.1016/j.vacuum.2019.03.033 ↗
52. Liu J, Zhou X, Tatarko P, et al. Fabrication, microstructure, and properties of SiC/Al₄SiC₄ multiphase ceramics via an in-situ formed liquid phase sintering. J Adv Ceram. 2020;9:193–203. https://doi.org/10.1007/s40145-020-0359-8.10.1007/s40145-020-0359-8 ↗
53. Sairam K, Sonber JK, Murthy TSRC, et al. Influence of spark plasma sintering parameters on densification and mechanical properties of Boron carbide. Int J Refract Met Hard Mater. 2014;42:185–92. https://doi.org/10.1016/j.ijrmhm.2013.09.004.10.1016/j.ijrmhm.2013.09.004 ↗
54. Vani VV, Chak SK. The effect of process parameters in aluminum metal matrix composites with powder metallurgy. Manuf Rev. 2018;5:1–13. https://doi.org/10.1051/mfreview/2018001.10.1051/mfreview/2018001 ↗
55. Chen M, Bai Y, Zhang Z, Zhao H. The Preparation of high-volume fraction SiC/Al composites with high thermal conductivity by vacuum pressure infiltration. Crystals. 2021;11:515. https://doi.org/10.3390/cryst11050515.10.3390/cryst11050515 ↗
56. Kawai C. Effect of interfacial reaction on the thermal conductivity of Al–SiC composites with SiC dispersions. J Am Ceram Soc. 2001;84:896–8. https://doi.org/10.1111/j.1151-2916.2001.tb00764.x.10.1111/j.1151-2916.2001.tb00764.x ↗