Achieving global ultrahigh yield strength and hardness of 316L stainless steel via interlayer additive/subtractive/equivalent hybrid manufacturing process
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Surface Treatment and Residual Stress
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Alam MS, Campbell SR, Spivey SR, Dutta G, Pal N, Karan A, Xie J, Decoster MA, Murray EP. Additively manufactured 316L stainless steel as a potential alternative implant material. J Mater Res Technol. 2025;34:2358–73. https://doi.org/10.1016/j.jmrt.2024.12.199.10.1016/j.jmrt.2024.12.199 ↗
2. Barrionuevo GO, Calvopiña H, Debut A, Pérez-Salinas C. Experimental and numerical investigation of sliding wear of heat-treated 316L stainless steel additively manufactured. J Mater Res Technol. 2024;33:2692–703. https://doi.org/10.1016/j.jmrt.2024.09.263.10.1016/j.jmrt.2024.09.263 ↗
3. Li Y, Ma C, Qin F, Chen H, Zhao X, Liu R, et al. The microstructure and mechanical properties of 316L austenitic stainless steel prepared by forge and laser melting deposition. Mater Sci Eng A. 2023;870:144820. https://doi.org/10.1016/j.msea.2023.144820.10.1016/j.msea.2023.144820 ↗
4. Xu W, Wang C, Long Y, Li C, Li G, Ding S. The influence of deformation affected region on microstructure and mechanical property of 316L fabricated by hybrid additive-subtractive manufacturing. J Manuf Process. 2024;117:154–69. https://doi.org/10.1016/j.jmapro.2024.03.010.10.1016/j.jmapro.2024.03.010 ↗
5. Markanday JFS. Applications of alloy design to cracking resistance of additively manufactured Ni-based alloys. Mater Sci Technol. 2022;38(16):1300–14. https://doi.org/10.1080/02670836.2022.2068759.10.1080/02670836.2022.2068759 ↗
6. Wang J, Xue Y, Xu D, Zeng Y, Li L, Wang Z, et al. Effects of layer-by-layer ultrasonic impact treatment on microstructure and mechanical properties of 304 stainless steel manufactured by directed energy deposition. Addit Manuf. 2023;68:103523. https://doi.org/10.1016/j.addma.2023.103523.10.1016/j.addma.2023.103523 ↗
7. Kim J, Chun Y, Kang SH, Lee BS. Effects of annealing temperature on cellular structure and mechanical properties of additively manufactured 304L stainless steel by directed energy deposition. Mater Sci Eng A. 2025;924:147821. https://doi.org/10.1016/j.msea.2025.147821.10.1016/j.msea.2025.147821 ↗
8. Kang L, Chen F, Bradford MA, Liu X. Experimental study of mechanical properties of laser additively manufactured 316L stainless steels. Structures. 2023;54:221–35. https://doi.org/10.1016/j.istruc.2023.05.053.10.1016/j.istruc.2023.05.053 ↗
9. Yildiz RA, Popa A, Malekan M. On the effect of small laser spot size on the mechanical behaviour of 316 l stainless steel fabricated by L-PBF additive manufacturing. Mater Today Commun. 2024;38(3):108168. https://doi.org/10.1016/j.mtcomm.2024.108168.10.1016/j.mtcomm.2024.108168 ↗
10. Lavery NP, Cherry J, Mehmood S, Davies H, Girling B, Sackett E, et al. Effects of hot isostatic pressing on the elastic modulus and tensile properties of 316L parts made by powder bed laser fusion. Mater Sci Eng A. 2017;693:186–213. https://doi.org/10.1016/j.msea.2017.03.100.10.1016/j.msea.2017.03.100 ↗
11. Maleki E, Unal O, Doubrava M, Pantelejev L, Bagherifard S, Guagliano M. Application of impact-based and laser-based surface severe plastic deformation methods on additively manufactured 316L: microstructure, tensile and fatigue behaviors. Mater Sci Eng A. 2024;916:147360. https://doi.org/10.1016/j.msea.2024.147360.10.1016/j.msea.2024.147360 ↗
12. Kan WH, Jiang D, Humbert M, Gao X, Bhatia VK, Proust G, et al. Effect of in-situ layer-by-layer rolling on the microstructure, mechanical properties, and corrosion resistance of a directed energy deposited 316L stainless steel. Addit Manuf. 2022;55:102863. https://doi.org/10.1016/j.addma.2022.102863.10.1016/j.addma.2022.102863 ↗
13. Liu G, Su Y, Pi X, Xin S, Li K, Liu D, et al. Achieving high strength 316L stainless steel by laser directed energy deposition-ultrasonic rolling hybrid process. Mater Sci Eng A. 2024;903:146665. https://doi.org/10.1016/j.msea.2024.146665.10.1016/j.msea.2024.146665 ↗
14. Xu Q, Liu J, Qiu Z, Li G, Liu Z, Zhang C. Near-defect-free manufacturing and enhanced overall wear and corrosion resistances of 316L stainless steel achieved by interlayer hybrid process with laser additive manufacturing, milling machining, and ultrasonic rolling. Adv Eng Mater. 2025;27(12):2403062. https://doi.org/10.1002/adem.202403062.10.1002/adem.202403062 ↗
15. Xu Q, Liu Z, Yang X, Zhang C, Liu J, Li G. Evolutions of porosity, microstructure, microhardness, and residual stress in 316L stainless steel subjected to interlayer hybrid laser additive, milling subtractive, and ultrasonic rolling equivalent manufacturing process. Mater Today Commun. 2025;46:112565. https://doi.org/10.1016/j.mtcomm.2025.112565.10.1016/j.mtcomm.2025.112565 ↗
16. Liu G, Du D, Wang K, Pu Z, Zhang D, Chang B. Microstructure and nanoindentation creep behavior of IC10 directionally solidified superalloy repaired by laser metal deposition. Mater Sci Eng A. 2021;808:140911. https://doi.org/10.1016/j.msea.2021.140911.10.1016/j.msea.2021.140911 ↗
17. Balit Y, Charkaluk E, Constantinescu A. Digital image correlation for microstructural analysis of deformation pattern in additively manufactured 316L thin walls. Addit Manuf. 2020;31:100862. https://doi.org/10.1016/j.addma.2019.100862.10.1016/j.addma.2019.100862 ↗
18. Hu YL, Li YL, Zhang S, Lin X, Wang Z, Huang W. Effect of solution temperature on static recrystallization and ductility of Inconel 625 superalloy fabricated by directed energy deposition. Mater Sci Eng A. 2020;772:138711. https://doi.org/10.1016/j.msea.2019.138711.10.1016/j.msea.2019.138711 ↗
19. Steiner MA, Mccabe RJ, Garlea E, Agnew SR. Monte Carlo modeling of recrystallization processes in α-uranium. J Nucl Mater. 2017;492:74–87. https://doi.org/10.1016/j.jnucmat.2017.04.026.10.1016/j.jnucmat.2017.04.026 ↗
20. Almangour B, Kim Y, Grzesiak D, Lee K. Novel TiB2-reinforced 316L stainless steel nanocomposites with excellent room- and high-temperature yield strength developed by additive manufacturing. Compos Part B Eng. 2019;156:51–63. https://doi.org/10.1016/j.compositesb.2018.07.050.10.1016/j.compositesb.2018.07.050 ↗
21. Wang D, Huang J, Tan C, Ma W, Zou Y, Yang Y. Mechanical and corrosion properties of additively manufactured SiC-reinforced stainless steel. Mater Sci Eng A. 2022;841:143018. https://doi.org/10.1016/j.msea.2022.143018.10.1016/j.msea.2022.143018 ↗
22. Zhang K, Wang S, Liu W, Shang X. Characterization of stainless steel parts by laser metal deposition shaping. Mater Des. 2014;55:104–19. https://doi.org/10.1016/j.matdes.2013.09.006.10.1016/j.matdes.2013.09.006 ↗
23. Casati R, Lemke J, Vedani M. Microstructure and fracture behavior of 316L austenitic stainless steel produced by selective laser melting. J Mater Sci Technol. 2016;32(8):738–44. https://doi.org/10.1016/j.jmst.2016.06.016.10.1016/j.jmst.2016.06.016 ↗
24. Saboori A, Piscopo G, Lai M, Salmi A, Biamino S. An investigation on the effect of deposition pattern on the microstructure, mechanical properties and residual stress of 316L produced by directed energy deposition. Mater Sci Eng A. 2020;780:139179. https://doi.org/10.1016/j.msea.2020.139179.10.1016/j.msea.2020.139179 ↗
25. Zhang A, Wu W, Wu M, Liu Y, Zhang Y, Wang Q. Influence of laser power on mechanical properties and pitting corrosion behavior of additively manufactured 316L stainless steel by laser powder bed fusion (L-PBF). Opt Laser Technol. 2024;176:110886. https://doi.org/10.1016/j.optlastec.2024.110886.10.1016/j.optlastec.2024.110886 ↗
26. Du Y, Guo C, Jiang F, Li Y, Sun X, Sun Q, et al. Effect of heat treatment on microstructure and properties of Al0·5CoCrFeNi high entropy alloy fabricated by selective laser melting. Mater Sci Eng A. 2023;882:145466. https://doi.org/10.1016/j.msea.2023.145466.10.1016/j.msea.2023.145466 ↗
27. Wu D, Yu C, Wang Q, Niu F, Ma G, Wang H, et al. Synchronous-hammer-forging-assisted laser directed energy deposition additive manufacturing of high-performance 316L samples. J Mater Process Technol. 2022;307:117695. https://doi.org/10.1016/j.jmatprotec.2022.117695.10.1016/j.jmatprotec.2022.117695 ↗
28. Xu H, Tian T, Hua B, Zhan W, Niu L, Han B, Zhang Q. Effect of in-situ rolling and heat treatment on microstructure, mechanical and corrosion properties of wire-arc additively manufactured 316L stainless steel. J Mater Res Technol. 2023;27:3349–61. https://doi.org/10.1016/j.jmrt.2023.10.168.10.1016/j.jmrt.2023.10.168 ↗
29. Grech IS, Sullivan JH, Lancaster RJ, Plummer J, Lavery NP. The optimisation of hot isostatic pressing treatments for enhanced mechanical and corrosion performance of stainless steel 316L produced by laser powder bed fusion. Addit Manuf. 2022;58:103072. https://doi.org/10.1016/j.addma.2022.103072.10.1016/j.addma.2022.103072 ↗
30. Galindo-Nava EI, Rivera-Díaz-Del-Castillo PEJ. A model for the microstructure behaviour and strength evolution in lath martensite. Acta Mater. 2015;98:81–93. https://doi.org/10.1016/j.actamat.2015.07.018.10.1016/j.actamat.2015.07.018 ↗
31. Chen XH, Lu J, Lu L, Lu K. Tensile properties of a nanocrystalline 316L austenitic stainless steel. Scr Mater. 2005;52(10):1039–44. https://doi.org/10.1016/j.scriptamat.2005.01.023.10.1016/j.scriptamat.2005.01.023 ↗
32. Cheng H, Lin Y, He D, Li H, Chen Z, Zhu J. Effects of stress-aging pretreatment on hot deformation behavior and microstructure evolution of a Ni–Cr–Nb–Mo–Ti alloy. Adv Eng Mater. 2021;23(12):2100571. https://doi.org/10.1002/adem.202100571.10.1002/adem.202100571 ↗
33. Lee SS, Min U, Ahn B, Yoo SH. Elastic constants determination of thin cold-rolled stainless steels by dynamic elastic modulus measurements. J Mater Sci. 1998;33(3):687–92. https://doi.org/10.1098/rspa.2003.1258.10.1098/rspa.2003.1258 ↗