Fundamentals of selecting kinematic and technological parameters in the process of erosive surface texturing using abrasive water jet
Source abstract
Abstract
Abstract The influence of abrasive water jet (AWJ) machining process parameters, including the path shift factor s , on the geometric characteristics of textured surfaces was investigated. The path shift factor s is defined as the path shift b to the diameter of the mixing nozzle d , determining the degree of jet overlap and thus the resulting surface texture. The experimental results showed that path shift factor in the range of s = 1.0–0.8 enabled the formation of textures with a distinct periodic and unidirectional structure, whereas path shift factor of s ≤ 0.4 led to surface smoothing and a reduction in structural features. Path shift factor in the range of s = 0.3–0.5 enabled the creation of a homogeneous surface with minimal irregularities, while maintaining a balance between roughness and functionality. Additionally, groove analysis revealed significant differences in their geometry depending on the path shift factor of the working head with groove width and depth at s = 0.8 reduced by 23% and 31%, respectively, compared to s = 1.0. Overlapping passes improved surface uniformity, which may positively affect wear resistance and load-carrying capacity. Moreover, grinding the upper fragments of surfaces textured with s = 1.0 and s = 0.9 contributed to a favorable reduction in roughness and enhanced load-bearing performance. Results were also presented for a different texturing strategy obtained by modifying parameters typical of cutting to form shallow grooves. The findings emphasize that selecting appropriate abrasive water jet texturing process parameters enables effective control of surface geometry, supporting the design and optimization of scanning-based texturing strategies for industrial applications, particularly in components such as bearings, gears, and sliding surfaces where durability and uniform load transfer are critical.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Erosion and Abrasive Machining · Tribology and Lubrication Engineering · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Ibatan T, Uddin MS, Chowdhury MAK. Recent development on surface texturing in enhancing tribological performance of bearing sliders. Surf Coat Technol. 2015;272:102–20. https://doi.org/10.1016/j.surfcoat.2015.04.017.10.1016/j.surfcoat.2015.04.017 ↗
2. Nasir FFM, Ghani JA, Zamri WFHW, Kasim MS. State-of-the-art surface texturing and methods for tribological performance. World Rev Sci Technol Sustain Dev. 2019;15(4):330. https://doi.org/10.1504/WRSTSD.2019.104096.10.1504/WRSTSD.2019.104096 ↗
3. Arola D, Ramulu M. An examination of the effects from surface texture on the strength of fiber reinforced plastics. J Compos Mater. 1999;33(2):102–23. https://doi.org/10.1177/002199839903300201.10.1177/002199839903300201 ↗
4. Arola D, McCain ML, Kunaporn S, Ramulu M. Waterjet and abrasive waterjet surface treatment of titanium: a comparison of surface texture and residual stress. Wear, 2001, 249(10–11), pp. 943–950. https://doi.org/10.1016/S0043-1648(01)00826-210.1016/S0043-1648(01)00826-2 ↗
5. Pawlus P, Galda L, Dzierwa A, Koszela W. Abrasive wear resistance of textured steel rings, Wear, 267, Issue 11, 2009, Pages 1873–82, https://doi.org/10.1016/j.wear.2009.03.00310.1016/j.wear.2009.03.003 ↗
6. Zou H, Yan S, Shen T, Wang H, Li Y, Chen J, Meng Y, Men S, Zhang Z, Sui T, Lin B. Efficiency of surface texturing in the reducing of wear for tests starting with initial point contact. Wear Volumes. 2021;482–3. https://doi.org/10.1016/j.wear.2021.203957.10.1016/j.wear.2021.203957 ↗
7. Gachot C, Rosenkranz A, Hsu SM, Costa HL. A critical assessment of surface texturing for friction and wear improvement. Wear. 2017;372:21–41. https://doi.org/10.1016/j.wear.2016.11.020.10.1016/j.wear.2016.11.020 ↗
8. Zhang L, Tan Z, Zhang C, Tang J, Yao C, You X, Hao B. Research on metal corrosion resistant bioinspired special wetting surface based on laser texturing technology: A review. Micromachines. 2022;13(9):1431. https://doi.org/10.3390/mi13091431.10.3390/mi13091431 ↗
9. Lu P, Wood RJ. Tribological performance of surface texturing in mechanical applications—A review. Surf Topogr Metrol Prop. 2020;8(4):043001. https://doi.org/10.1088/2051-672X/abb6d0.10.1088/2051-672X/abb6d0 ↗
10. Vencl A, Ivanović L, Stojanović B, Zadorozhnaya E, Miladinović S, Svoboda P. Surface texturing for tribological applications: A review. Proc Eng Sci. 2019;1(1):227–39. https://doi.org/10.24874/PES01.01.029.10.24874/PES01.01.029 ↗
11. Obilor AF, Pacella M, Wilson A, et al. Micro-texturing of polymer surfaces using lasers: a review. Int J Adv Manuf Technol. 2022;120:103–35. https://doi.org/10.1007/s00170-022-08731-1.10.1007/s00170-022-08731-1 ↗
12. Yang Y, Pan Y, Guo P. Structural coloration of metallic surfaces with micro/nano-structures induced by elliptical vibration texturing. Appl Surf Sci. 2017;402:400–9. https://doi.org/10.1016/j.apsusc.2017.01.026.10.1016/j.apsusc.2017.01.026 ↗
13. Costa HL, Hutchings IM. Hydrodynamic lubrication of textured steel surfaces under reciprocating sliding conditions. Tribol Int. 2007;40(8):1227–38. https://doi.org/10.1016/j.triboint.2007.01.014.10.1016/j.triboint.2007.01.014 ↗
14. Rosenkranz A, Costa HL, Profito F, Gachot C, Medina S, Dini D. Influence of surface texturing on hydrodynamic friction in plane converging bearings-An experimental and numerical approach. Tribol Int. 2019;134:190–204. https://doi.org/10.1016/j.triboint.2019.01.042.10.1016/j.triboint.2019.01.042 ↗
15. Wang XY, Lee S, Kim P, Seok J. Aerodynamic effect of 3D pattern on airfoil. Trans Can Soc Mech Eng. 2015;39(3):537–45. https://doi.org/10.1139/tcsme-2015-004.10.1139/tcsme-2015-004 ↗
16. Hong S, Goff JE, Asai T. Effect of a soccer ball’s surface texture on its aerodynamics and trajectory. Proc Institution Mech Eng Part P: J Sports Eng Technol. 2019;233(1):67–74. https://doi.org/10.1177/1754337118794.10.1177/1754337118794 ↗
17. Bi X, Liu H, Li Y, Xu M, Wang Z. Biomimetic papilla texture by femtosecond laser for high-strength CFRTP/A6061-T6 FSSW hybrid structures. Compos Part B: Eng. 2024;281:111500. https://doi.org/10.1016/j.compositesb.2024.111500.10.1016/j.compositesb.2024.111500 ↗
18. Hossain KR, Zheng Y, Yao X, et al. Biomimetic surface texturing with tunable Stimulus-Responsive friction anisotropy. J Bionic Eng. 2024;21:2942–54. https://doi.org/10.1007/s42235-024-00595-3.10.1007/s42235-024-00595-3 ↗
19. Xue L, Yan Z, Jiang Y, et al. Influences of Sharkskin texture on lubrication performance of elastic bearing friction pairs. Tribol Lett. 2024;72:103. https://doi.org/10.1007/s11249-024-01903-y.10.1007/s11249-024-01903-y ↗
20. Romano JM, Garcia Giron A, Penchev P, Gulcur M, Whiteside B, Dimov S. Lotus-leaf inspired surfaces: hydrophobicity evolution of replicas due to mechanical cleaning and mould wear. J Micro Nano-Manufacturing Volume/Issue. 2020;8(1). https://doi.org/10.1115/1.4046097.10.1115/1.4046097 ↗
21. Liu Y, He X, Yuan C, Cao P, Bai X. Antifouling applications and fabrications of biomimetic micro-structured surfaces: A review. J Adv Res. 2024;59:201–21. https://doi.org/10.1016/j.jare.2023.08.019.10.1016/j.jare.2023.08.019 ↗
22. Machado, A. R., da Silva, L. R., de Souza, F. C., Davis, R., Pereira, L. C., Sales,W. F., … Ezugwu, E. O. (2021). State of the art of tool texturing in machining. Journal of Materials Processing Technology, 293, 117096. https://doi.org/10.1016/j.jmatprotec.2021.117096.10.1016/j.jmatprotec.2021.117096 ↗
23. Vishnoi M, Kumar P, Murtaza Q. 2021. Surface texturing techniques to enhance tribological performance: A review, Surfaces and Interfaces. Volume 27, 2021. https://doi.org/10.1016/j.surfin.2021.10146310.1016/j.surfin.2021.101463 ↗
24. Chirita BA, Herghelegiu E, Radu MC, Tampu NC. Study of quality parameters for abrasive waterjet cutting of metals. In: Carou D, Davim JP, editors. Notes for manufacturing Instructors. Materials Forming, machining and tribology. Cham: Springer; 2024. https://doi.org/10.1007/978-3-031-48468-1_11.10.1007/978-3-031-48468-1_11 ↗
25. Chakkravarthy V, Oliveira JP, Mahomed A, Yu N, Manojkumar P, Lakshmanan M, Zhang L, Jerome RV, Ram Prabhu S, Narayan T. R.L., Effect of abrasive water jet peening on NaCl-induced hot corrosion behavior of Ti–6Al–4V, 210, 2023, 111872, https://doi.org/10.1016/j.vacuum.2023.11187210.1016/j.vacuum.2023.111872 ↗
26. Fei Song S, Yao L, Liu Y, Chi Z, Shao G, Wang Y, Jia X, Zhang S, Tu. Submerged deflecting abrasive waterjet peening for improving the surface integrity and solid particle erosion resistance of Ti-6Al-4V alloy, surface and coatings technology, 470, 2023, 129780, https://doi.org/10.1016/j.surfcoat.2023.12978010.1016/j.surfcoat.2023.129780 ↗
27. Lv Z, Hou R, Wang R, et al. Investigation on surface integrity and fatigue performance in abrasive waterjet peening. J Braz Soc Mech Sci Eng. 2022;44:520. https://doi.org/10.1007/s40430-022-03820-4.10.1007/s40430-022-03820-4 ↗
28. Avcu, E., Armağan, M., Avcu, Y. Y., Abakay, E., Çalım, E., Koç, F. G., … & Yamanoğlu, R. (2025). Modification of surface and subsurface properties of cold-rolledTi6Al4V sheets through water jet shot peening. Materials Research Express, 12(1),016503, doi: 10.1088/2053-1591/ada520.10.1088/2053-1591/ada520 ↗
29. Madhulika Srivastava R, Tripathi S, Hloch S, Chattopadhyaya. Amit Rai Dixit, potential of using water jet peening as a surface treatment process for welded Joints, procedia engineering, 149, 2016, pp. 472–80, https://doi.org/10.1016/j.proeng.2016.06.69410.1016/j.proeng.2016.06.694 ↗
30. Borkowski PJ, Borkowski JA. Basis of novel technique for Spatial objects shaping with high-pressure abrasive water jet. J Manuf Sci Ing Oct. 2010;132(5):054501. https://doi.org/10.1115/1.4002376.10.1115/1.4002376 ↗
31. Bañon F, Sambruno A, Gómez A, Mayuet PF. (2021, October). Preliminary study of abrasive water jet texturing on low thickness UNS A92024 alloy sheets. In IOP Conference Series: Materials Science and Engineering (Vol. 1193, No. 1, p. 012027). https://doi.org/10.1088/1757-899X/1193/1/01202710.1088/1757-899X/1193/1/012027 ↗
32. Borkowski P, Szpakowicz A. (2009, August). Abrasive-water jet shaping of bas-relief. In 2009 WJTA American Waterjet Conference.
33. Haj Mohammad Jafar R, Spelt JK, Papini M. Surface roughness and erosion rate of abrasive jet micro-machined channels: Experiments and analytical model, Wear, Volume 303, Issues 1–2, 2013, pp. 138–145. https://doi.org/10.1016/j.wear.2013.03.00510.1016/j.wear.2013.03.005 ↗
34. Azarsa E, Jeyhani M, Ibrahim A, Tsai SSH, Papini M. A novel abrasive water jet machining technique for rapid fabrication of three-dimensional microfluidic components. Biomicrofluidics. 2020;14(4):044103. https://doi.org/10.1063/5.0009443.10.1063/5.0009443 ↗
35. Ravasio C, Conconi S, Stehle D, et al. Erosion in the contact periphery in the initiation zone due to erosion of abrasive water jet. Int J Adv Manuf Technol. 2025;136:3641–53. https://doi.org/10.1007/s00170-025-15074-0.10.1007/s00170-025-15074-0 ↗
36. Szada-Borzyszkowska M, Kacalak W, Szada-Borzyszkowski W, et al. Topography of textured surfaces using an abrasive-water jet technology. Arch Civ Mech Eng. 2024;24:226. https://doi.org/10.1007/s43452-024-01035-z.10.1007/s43452-024-01035-z ↗
37. Borkowski PJ. Application of abrasive-water jet technology for material sculpturing. Trans Can Soc Mech Eng. 2010;34(3–4):389–400.10.1139/tcsme-2010-0023 ↗
38. Borkowski P. Technique for Spatial objects shaping with abrasive-water jet controlled by virtual image luminance. Archive Mech Eng. 2010;57(3):247–61.10.2478/v10180-010-0013-z ↗
39. Stolárik G, Klichová D, Poloprudský J, et al. Submerged surface texturing of AISI 304L using the pulsating water jet method. Arch Civ Mech Eng. 2024;24:207. https://doi.org/10.1007/s43452-024-01029-x.10.1007/s43452-024-01029-x ↗
40. Cano-Salinas L, Sourd X, Moussaoui K, Le Roux S, Salem M, Hor A, et al. Effect of process parameters of plain water jet on the cleaning quality, surface and material integrity of inconel 718 milled by abrasive water jet. Tribol Int. 2023;178:108094. https://doi.org/10.1016/j.triboint.2022.108094.10.1016/j.triboint.2022.108094 ↗
41. Pawlus P, Reizer R, Wieczorowski M, Zelasko W. Wpływ wybranych błędów pomiarowych na parametry tekstury powierzchniowej. Materiały 2022, 15, 4758. Zapisz się na https://doi.org/10.3390/ma1514475810.3390/ma15144758 ↗
42. Rypina Ł, Lipiński D, Banaszek K, Kacalak W, Szafraniec F. Influence of the geometrical features of the cutting edges of abrasive grains on the removal efficiency of the Ti6Al4V titanium alloy. Materials. 2022;15:6189. https://doi.org/10.3390/ma15186189.10.3390/ma15186189 ↗