Method of determination thin film hardening characteristics from the as-deposited sample with nanoindentation test and inverse analysis
Source abstract
Abstract
Abstract Determining the mechanical properties of thin films presents significant challenges due to their nanometer-scale thickness. The separation of thin films from their substrates for standard plastometric testing is often difficult, if not impossible, complicating the direct measurement of their properties. Consequently, nanoindentation tests, which involve using small indenters and analyzing force-displacement curves, are commonly employed to assess the mechanical properties of thin films. However, experimental methods alone may be insufficient for accurately determining these properties for such thin films. This paper proposes an approach that combines numerical modelling of nanoindentation tests with the finite element method and inverse analysis to determine the optimal material constants for the substrate and thin film. The study focuses on TiN thin films deposited on silicon and stainless steel substrates as case studies. Prior to extracting the properties of the thin films, a comprehensive numerical accuracy analysis of the nanoindentation model was conducted. This involved investigating the impact of the digital model on the accuracy of results, comparing 2D and 3D models to optimize computational efficiency, and analysing the effect of finite element mesh discretization. The critical importance of accurately representing the indenter shape for reliable results was also highlighted. Following model validation, a series of nanoindentation simulations were performed on silicon and subsequently on the TiN/Si structure, enabling the separate determination of material constants for the substrate and the TiN thin film. The procedure was then applied to the TiN/SS structure for verification. The findings demonstrate that this approach enables the determination of the as-deposited thin film material properties based solely on nanoindentation tests and a robust numerical model, and it can be extended to other thin films.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Copper Interconnects and Reliability · Numerical methods in engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Burakowski T, Major B. Osadzanie Laserem impulsowym—metoda PLD. Inż Mat. 1999;20:339–43.
2. Pancielejko M. Adhesion of PVD and CVD hard coatings as an essential parameter that determines the durability of coated tools. Archives Mater Sci Eng. 2019;1:5–21. https://doi.org/10.5604/01.3001.0013.1988.10.5604/01.3001.0013.1988 ↗
3. Movassagh-Alanagh F, Mahdavi M. Improving wear and corrosion resistance of AISI 304 stainless steel by a multilayered nanocomposite Ti/TiN/TiSiN coating. Surf Interfaces. 2020;18:100428. https://doi.org/10.1016/j.surfin.2019.100428.10.1016/j.surfin.2019.100428 ↗
4. Malmros A, Andersson K, Rorsman N. Combined TiN- and TaN temperature compensated thin film resistors. Thin Solid Films. 2012;520:2162–5. https://doi.org/10.1016/j.tsf.2011.09.050.10.1016/j.tsf.2011.09.050 ↗
5. Vershinin N, Filonov K, Straumal B, Gust W, Wiener I, Rabkin E, Kazakevich A. Corrosion behaviour of the protective and decorative TiN coatings on large area steel strips. Surf Coat Technol. 2000;125:229–32. https://doi.org/10.1016/S0257-8972(99)00556-3.10.1016/S0257-8972(99)00556-3 ↗
6. Łępicka M, Grądzka-Dahlke M, Pieniak D, Pasierbiewicz K, Niewczas A. Effect of mechanical properties of substrate and coating on wear performance of TiN- or DLC-coated 316LVM stainless steel. Wear. 2017;382–3. https://doi.org/10.1016/j.wear.2017.04.017.10.1016/j.wear.2017.04.017 ↗
7. Gotman I, Gutmanas EY. Titanium nitride-based coatings on implantable medical devices. Adv Biomaterials Devices Med. 2014;1:53–7.
8. Kazemi M, Ahangarani S, Esmailian M, Shanaghi A. Investigation on the corrosion behavior and biocompatibility of Ti-6Al-4V implant coated with HA/TiN dual layer for medical applications. Surf Coat Technol. 2020;397:126044. https://doi.org/10.1016/j.surfcoat.2020.126044.10.1016/j.surfcoat.2020.126044 ↗
9. Lackner JM, Waldhauser W, Major R, Major B, Czarnowska E, Bruckert F. Industrially scaled pulsed laser deposition based coating techniques for the realization of hemocompatible surfaces for blood contact applications. SPIE: in: High-Power Laser Ablation VII; 2008. https://doi.org/10.1117/12.778176.10.1117/12.778176 ↗
10. An T, Wang LL, Tian HW, Wen M, Zheng WT. Deformation and fracture of TiN coating on a Si(111) substrate during nanoindentation. Appl Surf Sci. 2011;257:7475–80. https://doi.org/10.1016/j.apsusc.2011.03.043.10.1016/j.apsusc.2011.03.043 ↗
11. Hu Z. Characterization of materials, nanomaterials, and thin films by nanoindentation. Microscopy methods in nanomaterials characterization. Elsevier; 2017. pp. 165–239. https://doi.org/10.1016/B978-0-323-46141-2.00006-7.10.1016/B978-0-323-46141-2.00006-7 ↗
12. Bull SJ. Nanoindentation of coatings. J Phys D Appl Phys. 2005;38:R393–413. https://doi.org/10.1088/0022-3727/38/24/R01.10.1088/0022-3727/38/24/R01 ↗
13. Zahed M, Dimitri R, Tornabene F, Ashrafi H. Modeling and analysis of time-dependent creep and relaxation behavior of polymeric materials using fractional derivative three-component standard viscoelastic models and nanoindentation experimental data. Archives Civil Mech Eng. 2025;25:111. https://doi.org/10.1007/s43452-025-01165-y.10.1007/s43452-025-01165-y ↗
14. Sidiropoulos AD, Harea E, Konstantinidis AA, Aifantis EC. Pop-in and pop-out effect in monocrystalline silicon. A statistical investigation. J Mech Behav Mater. 2017;26. https://doi.org/10.1515/jmbm-2017-0015.10.1515/jmbm-2017-0015 ↗
15. Perzynski K, Cios G, Szwachta G, Zych D, Setty M, Bala P. Lu. Madej, evaluation of pulsed laser deposited thin films properties on the basis of the nanoindentation test. Procedia Eng. 2017;207:2191–6. https://doi.org/10.1016/j.proeng.2017.10.980.10.1016/j.proeng.2017.10.980 ↗
16. Hernot X, Moussa C, Bartier O. Study of the concept of representative strain and constraint factor introduced by Vickers indentation. Mech Mater. 2014;68:1–14. https://doi.org/10.1016/j.mechmat.2013.07.004.10.1016/j.mechmat.2013.07.004 ↗
17. Deng GY, Tieu AK, Su LH, Zhu HT, Zhu Q, Zamri WFH, Kong C. Characterizing deformation behaviour of an oxidized high speed steel: effects of nanoindentation depth, friction and oxide scale porosity. Int J Mech Sci. 2019;155:267–85. https://doi.org/10.1016/j.ijmecsci.2019.02.043.10.1016/j.ijmecsci.2019.02.043 ↗
18. Perzyński K. The effect of model size and boundary conditions on the representativeness of digital material representation simulations of ferritic-pearlitic sample compression. Comput Methods Mater Sci. 2022;22:59–66.
19. Fischer-Cripps AC. Nanoindentation testing. In: Nanoindentation. New York, NY: Springer New York; 2002. pp. 20–35. https://doi.org/10.1007/978-0-387-22462-6_2.10.1007/978-0-387-22462-6_2 ↗
20. Lofaj F, Németh D. Multiple cohesive cracking during nanoindentation in a hard W-C coating/steel substrate system by FEM. J Eur Ceram Soc. 2017;37:4379–88. https://doi.org/10.1016/j.jeurceramsoc.2017.03.051.10.1016/j.jeurceramsoc.2017.03.051 ↗
21. Ma D, Ong CW, Wong SF. New relationship between young’s modulus and nonideally sharp indentation parameters. J Mater Res. 2004;19:2144–51. https://doi.org/10.1557/JMR.2004.0274.10.1557/JMR.2004.0274 ↗
22. Milman YV, Gridneva IV, Golubenko AA. Construction of stess-strain curves for brittle materials by indentation in a wide temperature range. Sci Sinter. 2007;39:67–75. https://doi.org/10.2298/SOS0701067M.10.2298/SOS0701067M ↗
23. He G, Sun D, Zang S, Chen J, Fang Z. Evaluation of the elastic-plastic properties of TiN coating by nanoindentation technologies using FEM-reverse algorithm. Surf Coat Technol. 2021;409:126855. https://doi.org/10.1016/j.surfcoat.2021.126855.10.1016/j.surfcoat.2021.126855 ↗
24. Kurgan A, Madej L. Role of crystallographic orientation in material behaviour under nanoindentation: molecular dynamics study. Mater Sci-Pol. 2023;41:18–26. https://doi.org/10.2478/msp-2023-0032.10.2478/msp-2023-0032 ↗