Strongly reinforced composite dowels (SRCD): a new structural solution and new design concept
Source abstract
Abstract
Abstract Strongly reinforced composite dowels (SRCD) is a new structural solution that enables the creation of new types of steel–concrete hybrid sections in bridges. It was developed in Poland in 2021 to build a new kind of hybrid bridge, in which the webs made of normal concrete are to be only 20 cm thick, which is less than allowed by the current regulations for designing structures with a composite dowels shear connection. The design solution assumes the use of such a high density of bars in the vicinity of steel dowels that brittle mechanisms of concrete failure (pry-out cone) will be eliminated while ensuring such a degree of confinement of the concrete dowel core that the failure mechanism can be classified as close to the currently adopted shear failure mechanism. The target concept of design, the scientific basis of which is presented in this paper, is therefore completely different to the present one. Instead of two criteria for concrete failure in the form of pry-out cone and shear, there will be only one criterion in the form of shear with a reduced confinement effect. It is emphasized that the obtained load-bearing capacity will be significantly greater than calculated from the current pry-out criterion, which always decides when designing a bridge structure. It is noted that under the proposed concept, two separate issues were simultaneously recognized, linked, and solved: the first concerns a narrow concrete web and the hypothetical pry-out cone perpendicular to the surface of the steel web, and the second concerns the pry-out cone from the bottom of the web.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Civil and Structural Engineering Research · Structural Analysis of Composite Materials · Structural Engineering and Vibration Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Lorenc W. Composite dowels: the way to the new forms of steel-concrete composite structures, zaprezentowano na IABSE Symposium: Synergy of Culture and Civil Engineering—History and Challenges, Wrocław, Poland, 7–9 October 2020, 98–138.10.2749/wroclaw.2020.0093 ↗
2. Lorenc W, Kożuch M. Development of the modified clothoidal (MCL) shape of composite dowels against the background of fatigue and technological issues, Studia Geotechnica et Mechanica 2024;46:91–110.10.2478/sgem-2024-0005 ↗
3. CEN/TC 250/SC 4 N 1817. Composite dowels: Annex D final draft. 2017.
4. EN 1994–1–102 Eurocode 4: Design of composite steel and concrete structures. Part 1–102: Composite Dowels, EUROCODE Conference, Berlin, 24 May 2023.
5. Kołakowski T, Kosecki W, Windorpskib H, Stempniewicz A, Bartoszek B, Lorenc W, Kożuch M, Kozioł P. Modern solutions for middle span steel-concrete composite bridges in Poland: hybrid girders and rolled sections using high strength steel and weathering steel, zaprezentowano na Nordic Steel Construction Conference 2024 (NSCC 2024), Luleå, Sweden. 2024.
6. Lorenc W, Kurz W, Seidl G, Hybrid steel–concrete sections for bridges: definition and basis for design, Eng Struct. 2022;270, 114902.10.1016/j.engstruct.2022.114902 ↗
7. Lorenc W, Kolakowski T, Hukowicz A, Seidl G, Verbundbrücke bei Elbląg, Stahlbau 2017;86:167–174.10.1002/stab.201710463 ↗
8. Seidl G, Schmitt V, Lorenc W, Brücken mit Verbunddübelleisten – Entwurf, Bemessung und Ausführungsbeispiele, zaprezentowano na 31. DRESDNER BRÜCKENBAUSYMPOSIUM PLANUNG, BAUAUSFÜHRUNG, INSTANDSETZUNG UND ERTÜCHTIGUNG VON BRÜCKEN 07. UND 08. JUNI 2022.
9. Seidl G, Lorenc W, Innovative Konstruktionen im Verbundbrückenbau mit Verbunddübelleisten, Stahlbau, 2018; 87:547–554.10.1002/stab.201810617 ↗
10. Zulassungsbescheid Z-26.4–56, Allgemeine bauaufsichtliche Zulassung Verbunddübelleisten. Deutsches Institut für Bautechnik, Berlin; 2013.
11. Seidl G, Popa N, Zanon R, Lorenc W, Kożuch M, Rowiński S, Franssen J-M, Fohn T, Farhang A, Nüsse G, PRECO+: Prefabricated enduring composite beams based on innovative shear transmission. Research Fund for Coal and Steel, Contract No. RFSP-CT-2011–00026, 01/07/2011–31/12/2012.
12. Lorenc W, Seidl G, Composite dowels for bridges: trends and challenges for new European design rules, Ce/papers, 2023;6:118–129.10.1002/cepa.1897 ↗
13. Feldmann M, Kopp M, Pak D, Composite dowels as shear connectors for composite beams—background to the German technical approval, Steel Constr. 2016;9:80–8.10.1002/stco.201610020 ↗
14. Seidl G, Behaviour and load bearing capacity of composite dowels in steel-concrete composite girders, PhD Thesis, Rozprawa doktorska (25.11.2009) Politechnika Wrocławska, Instytut Budownictwa, Wrocław. 2009.
15. Materialprüfungsamt für Bauwesen der Technischen Universität München: 6 Push-Out-Versuche für das Pilotprojekt Low-Cost-Bridge der Daetchen Bahn, München. 2010.
16. Lorenc W, Kożuch MP, Seidl G, Zur Grenztragfähigkeit von Verbunddübeln mit Klothoidenform, Stahlbau 2013; 82:196–207.10.1002/stab.201310030 ↗
17. Sęk R, Pilujski B, Sobala D, Lorenc W, New type of composite arch element using composite dowels: application in railway network arch bridge. Ce/papers 2023;6:164–172.10.1002/cepa.1901 ↗
18. Lechner T, Zur Anwendung von Verbunddübelleisten in schlanken Verbundträgern aus ultrahochfestem Beton, PhD Thesis, Technische Universität München. 2018.
19. Lechner T, Fischer O, Seidl G, Lightweight composite beams utilizing UHPC and composite dowels, zaprezentowano na Eleventh High Performance Concrete (11th HPC) & Second Concrete Innovation Conference (2nd CIC). 2017.
20. Hoyer O, Verbundkonstruktionen aus hochfesten Materialien in System- und Modulbauweise, PhD Thesis, Universität Dortmund. 2007.