journal article·2025-06-30Open access

Fatigue resistance of thermal-sprayed additively manufactured MS1 steel under varied mechanical loading conditions

Robert Owsiński, Michał Böhm, Adam Niesłony, Miloslav Kepka, Miloslav Kepka, Ivana Zetkova, Marek Vostřák, Šárka Houdková

Abstract

Abstract This study investigates the fatigue resistance of additively manufactured MS1 steel coated with thermally sprayed WC-Cr3C2-Ni and Cr3C2-NiCr, applied using High Velocity Oxygen Fuel technology. The research focuses on evaluating the effects of these coatings on fatigue life under varying mechanical loading conditions. It was shown that such treatments greatly improve resistance to fatigue, especially at low stress levels by delaying crack initiation and slowing down their propagation. Nevertheless, when stress levels are higher, benefits from coating diminish and differences in fatigue strength between coated and uncoated specimens are unnoticeable. Under torsional loads, the coatings are rapidly damaged, which may suggest that the driving force behind wear is surface shear stress and that further improvement of the durability of coatings are necessary.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Surface Treatment and Residual Stress · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Habiby F, ul Haq A, Khan AQ. The properties and applications of 18% nickel maraging steels. Mater Technol. 1994;9:246–52.10.1080/10667857.1994.11785084 ↗
2. Kanyilmaz A, et al. Role of metal 3D printing to increase quality and resource-efficiency in the construction sector. Addit Manuf. 2022;50: 102541.
3. Jayashree P, Turani S, Straffelini G. Effect of velocity and temperature on the dry sliding behavior of a SiC-Graphite composite against WC-CoCr and WC-FeCrAlY HVOF coatings. Wear. 2021;464–465: 203553.10.1016/j.wear.2020.203553 ↗
4. González-Hermosilla WA, et al. Effect of substrate roughness on the fatigue behavior of a SAE 1045 steel coated with a WC–10Co–4Cr cermet, deposited by HVOF thermal spray. Mater Sci Eng A. 2010;527:6551–61.10.1016/j.msea.2010.07.014 ↗
5. Puchi-Cabrera ES, et al. Fatigue behavior of AA7075-T6 aluminum alloy coated with a WC–10Co–4Cr cermet by HVOF thermal spray. Surf Coat Technol. 2013;220:122–30.10.1016/j.surfcoat.2012.04.087 ↗
6. Vieira LFS, Voorwald HJC, Cioffi MOH. Fatigue performance of AISI 4340 steel Ni-Cr-B-Si-Fe HVOF thermal spray coated. Procedia Eng. 2015;114:606–12.10.1016/j.proeng.2015.08.111 ↗
7. Si C, Li S, Zhao L, Xu S, Chen S. Effect of HVOF–sprayed nanostructured WC–10Co–4Cr coating on sliding wear and tensile–tensile fatigue properties of TC6 titanium alloy. Int J Refract Met Hard Mater. 2024;118: 106463.10.1016/j.ijrmhm.2023.106463 ↗
8. Souza VAD, Neville A. Aspects of microstructure on the synergy and overall material loss of thermal spray coatings in erosion–corrosion environments. Wear. 2007;263:339–46.10.1016/j.wear.2007.01.071 ↗
9. Ahmed R. Contact fatigue failure modes of HVOF coatings. Wear. 2002;253:473–87.10.1016/S0043-1648(02)00163-1 ↗
10. Ghelichi R, et al. Fatigue strength of Al alloy cold sprayed with nanocrystalline powders. Int J Fatigue. 2014;65:51–7.10.1016/j.ijfatigue.2013.09.001 ↗
11. Sivagnanam Chandra NGP, Otsuka Y, Mutoh Y, Yamamoto K. Effect of coating thickness on fatigue behavior of TiAlN coated Ti-alloys. Int J Fatigue. 2020;140: 105767.10.1016/j.ijfatigue.2020.105767 ↗
12. Akebono H, Komotori J, Shimizu M. Effect of coating microstructure on the fatigue properties of steel thermally sprayed with Ni-based self-fluxing alloy. Int J Fatigue. 2008;30:814–21.10.1016/j.ijfatigue.2007.07.003 ↗
13. Akebono H, Komotori J, Suzuki H. The effect of coating thickness on fatigue properties of steel thermally sprayed with Ni-based self-fluxing alloy. Int J Mod Phys B. 2006;20:3599–604.10.1142/S0217979206040052 ↗
14. Slámečka K, Ponížil P, Pokluda J. Quantitative fractography in bending-torsion fatigue. Mater Sci Eng A. 2007;462:359–62.10.1016/j.msea.2006.03.153 ↗
15. Slámečka K, Pokluda J, Kianicová M, Major Š, Dvořák I. Quantitative fractography of fish-eye crack formation under bending–torsion fatigue. Int J Fatigue. 2010;32:921–8.10.1016/j.ijfatigue.2009.07.009 ↗
16. Slámečka K, et al. Bending fatigue failure of atmospheric-plasma-sprayed CoNiCrAlY + YSZ thermal barrier coatings. Int J Fatigue. 2015;70:186–95.10.1016/j.ijfatigue.2014.09.009 ↗
17. Souza RC, Voorwald HJC, Cioffi MOH. Fatigue strength of HVOF sprayed Cr3C2-25NiCr and WC-10Ni on AISI 4340 steel. Surf Coat Technol. 2008;203:191–8.10.1016/j.surfcoat.2008.07.038 ↗
18. Li Y, Li CJ, Yang GJ, Xing LK. Thermal fatigue behavior of thermal barrier coatings with the MCrAlY bond coats by cold spraying and low-pressure plasma spraying. Surf Coat Tech. 2010;205:2225–33.10.1016/j.surfcoat.2010.08.144 ↗
19. Vackel A, Sampath S. Fatigue behavior of thermal sprayed WC-CoCr- steel systems: role of process and deposition parameters. Surf Coat Technol. 2017;315:408–16.10.1016/j.surfcoat.2017.02.062 ↗
20. McGrann RTR, et al. The effect of coating residual stress on the fatigue life of thermal spray-coated steel and aluminum. Surf Coat Technol. 1998;108–109:59–64.10.1016/S0257-8972(98)00665-3 ↗
21. Ibrahim A, Berndt CC. Fatigue and deformation of HVOF sprayed WC-Co coatings and hard chrome plating. Mater Sci Eng A. 2007;456:114–9.10.1016/j.msea.2006.12.030 ↗
22. Chen ZB, Wang ZG, Zhu SJ. Thermomechanical fatigue behavior of an air plasma sprayed thermal barrier coating system. Mater Sci Eng A. 2011;528:8396–401.10.1016/j.msea.2011.08.031 ↗
23. Ahmed R, Hadfield M. Mechanisms of fatigue failure in thermal spray coatings. J Therm Spray Technol. 2002;11:333–49.10.1361/105996302770348727 ↗
24. Amanov A, Berkebile SP. Enhancement of sliding wear and scratch resistance of two thermally sprayed Cr-based coatings by ultrasonic nanocrystal surface modification. Wear. 2023;512–513:204555.10.1016/j.wear.2022.204555 ↗
25. Cyr E, Lloyd A, Mohammadi M. Tension-compression asymmetry of additively manufactured Maraging steel. J Manuf Process. 2018;35:289–94.10.1016/j.jmapro.2018.08.015 ↗
26. Karolczuk A, et al. Key role of surface defects in the multiaxial fatigue life of additively manufactured unmachined 18Ni300 maraging steel. Int J Fatigue. 2024;184: 108319.10.1016/j.ijfatigue.2024.108319 ↗
27. EOS. EOS MS1 Material data sheet. (2022).
28. Owsiński R, Gupta MK, Lachowicz CT, Ross NS, Vashishtha G. Exploring the impact of phase-shifted loading conditions on fatigue life of S355J2 mild steel with different machine learning approaches. Int J Adv Manuf Technol. 2024;132:475–94.10.1007/s00170-024-13389-y ↗
29. Owsiński R, Lachowicz DS, Lachowicz CT, Gil R, Niesłony A. Characterisation of joint properties through spatial mapping of cracks in fatigue specimens, extracted from the linearly friction welded steel coupon. Precis Eng. 2021;71:78–89.10.1016/j.precisioneng.2021.02.008 ↗
30. Böhm M, et al. General reference and design S-N curves obtained for 12709 tool steel. Materials. 2023;16:1823.10.3390/ma16051823 ↗