journal article·2025-04-18Open access

Experimental tests and numerical analysis of the dynamic behavior of thin single and segmented nano-alumina-reinforced cementitious targets

S. Farsavani Mohammadi, H. Ahmadi, E. Pedram, G. Liaghat

Abstract

Abstract This study investigates the mechanical performance of cementitious composite targets through nanoparticle addition and target configuration optimization under quasi-static and dynamic loading. This dual approach addresses both material-level and structural-level improvements for impact resistance. Experiments were manufactured by adding three replacement ratios of nano-Al2O3 particles, specifically 1%, 2%, and 4% by weight of cement, to the cementitious composite and tested under quasi-static compressive, split tensile, and high-velocity impact (HVI) loading. The finite element model (FEM) was developed using the Abaqus software package, incorporating the JH-2 material constitutive model calibrated with data from experimental material tests. Furthermore, simulations were conducted to investigate the effects of target thickness and segmentation strategy on the ballistic response of specimens. The experimental results revealed that the total incorporation of nano-alumina particles promotes the specimen’s quasi-static mechanical properties and impact resistance, resulting in substantial mitigation of phenomena, including radial cracking, spalling, scabbing, cone cracking, and shear plugging. The addition of 1 wt%. nano-Al2O3 caused the maximum compressive and tensile strength values, showing an uptrend of 26% and 110%, respectively. Furthermore, including 1.0% nano-Al2O3 particles improved specimens’ ballistic limit velocity (BLV) and energy absorption, showing enhancements of up to 12.7% and 27.2%, respectively. Numerical simulations revealed that increasing the target thickness or subjoining the extra parts improves the BLV, while the damage mechanisms and in situ construction of considered strategies are different. The findings from this study provide valuable insights for enhancing the impact load-bearing capacity of existing and future structures exposed to high-velocity collisions.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Structural Response to Dynamic Loads · Ion-surface interactions and analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Rajput A, Iqbal MA, Gupta N. Ballistic performances of concrete targets subjected to long projectile impact. Thin-Walled Struct. 2018;126:171–81.10.1016/j.tws.2017.01.021 ↗
2. Georgin J, Reynouard J. Modeling structures subjected to impact: concrete behavior under high strain rate. Cement Concr Compos. 2003;25:131–43.10.1016/S0958-9465(01)00060-9 ↗
3. Manouchehrian A, Sharifzadeh M, Marji MF, Gholamnejad J. A bonded particle model for analysis of the flaw orientation effect on crack propagation mechanism in brittle materials under compression. Arch Civ Mech Eng. 2014;14:40–52.10.1016/j.acme.2013.05.008 ↗
4. Evci C, Gülgeç M. Effective damage mechanisms and performance evaluation of ceramic composite armors subjected to impact loading. J Compos Mater. 2014;48(26):3215–36.10.1177/0021998313508594 ↗
5. Antoniou A, Daudeville L, Marin P, et al. Discrete element modelling of concrete structures under hard impact by ogive-nose steel projectiles. Eur Phys J Spec Top. 2018;227:143–54.10.1140/epjst/e2018-00059-y ↗
6. Kennedy RP. A review of procedures for the analysis and design of concrete structures to resist missile impact effects. Nucl Eng Des. 1976;37:183–203.10.1016/0029-5493(76)90015-7 ↗
7. Mahmood RA, Kockal NU. Nanoparticles used as an ingredient in different types of concrete. SN Appl Sci. 2021;3:529.10.1007/s42452-021-04461-3 ↗
8. Raki L, Beaudoin J, Alizadeh R, Makar J, Sato T. Cement and concrete nanoscience and nanotechnology. Materials. 2010;3:918–42.10.3390/ma3020918 ↗
9. Nazari A, Riahi S, Riahi S, Shamekhi SF, Khademno A. Mechanical properties of cement mortar with Al2O3 nanoparticles. J Am Sci. 2010;6:94–7.
10. Shekari A, Razzaghi MS. Influence of nano particles on durability and mechanical properties of high performance concrete. Procedia Eng. 2011;14:3036–41.10.1016/j.proeng.2011.07.382 ↗
11. Arefi M, Javeri M, Mollaahmadi E. To study the effect of adding Al2O3 nanoparticles on the mechanical properties and microstructure of cement mortar. Life Sci J. 2011;8:613–7.
12. Seifoori S, Izadi R, Liaghat G, Parrany AM. An experimental study on damage intensity in composite plates subjected to low-velocity impacts. Polym Test. 2021;93:106887.10.1016/j.polymertesting.2020.106887 ↗
13. Wang L, Jiang H, Li Z. Mechanical behaviors of 3D printed lightweight concrete structure with hollow section. Arch Civ Mech Eng. 2020;20:1644–9665.10.1007/s43452-020-00017-1 ↗
14. Chen JF, Teng J. Anchorage strength models for FRP and steel plates bonded to concrete. J Struct Eng. 2001;127:784–91.10.1061/(ASCE)0733-9445(2001)127:7(784) ↗
15. Abdel-Kader MM, Fouda A. Improving the impact resistance of concrete panels by glass fiber reinforced polymer sheets. Int J Prot Struct. 2017;8:304–20.10.1177/2041419617712168 ↗
16. Wang C, Qu Z, Zou Y, Yin C, Zong Y, Sun Z. Seismic performance analysis of segmental assembled concrete-filled steel tubular pier with external replaceable energy dissipation ring. Appl Sci. 2022;12:4729.10.3390/app12094729 ↗
17. ASTM C150/C150M-20. Standard specification for portland cement. West Conshohocken: ASTM International; 2020.
18. ASTM C33/C33M-18. Standard specification for concrete aggregates. West Conshohocken: ASTM International; 2018.
19. Štefančič M, Mladenovič A, Bellotto M, Jereb V, Završnik L. Particle packing and rheology of cement pastes at different replacement levels of cement by α-Al2O3 submicron particles. Constr Build Mater. 2017;139:256–66.10.1016/j.conbuildmat.2017.02.079 ↗
20. Heikal M, Ismail M, Ibrahim N. Physico-mechanical, microstructure characteristics and fire resistance of cement pastes containing Al2O3 nano-particles. Constr Build Mater. 2015;91:232–42.10.1016/j.conbuildmat.2015.05.036 ↗
21. Nazari A, Riahi S. The effects of Cr2O3 nanoparticles on strength assessments and water permeability of concrete in different curing media. Mater Sci Eng, A. 2011;528:1173–82.10.1016/j.msea.2010.09.099 ↗
22. ASTM C39/C39M-20. Standard test method for compressive strength of cylindrical concrete specimens. West Conshohocken: ASTM International; 2020.
23. ASTM C496/C496M-17. Standard test method for splitting tensile strength of cylindrical concrete specimens. West Conshohocken: ASTM International; 2017.
24. Hall C. Water sorptivity of mortars and concretes: a review. Mag Concr Res. 1989;41:51–61.10.1680/macr.1989.41.147.51 ↗
25. Hedayatian M, Liaghat G, Rahimi G, Pol M, Hadavinia H, Zamani R. Investigation of the high velocity impact behavior of grid cylindrical composite structures. Polym Compos. 2017;38:2603–8.10.1002/pc.23853 ↗
26. Backman ME, Goldsmith W. The mechanics of penetration of projectiles into targets. Int J Eng Sci. 1978;16:1–99.10.1016/0020-7225(78)90002-2 ↗
27. Khazraiyan N, Liaghat GH, Khodarahmi H. Normal impact of hard projectiles on concrete targets. Struct Concr. 2013;14:176–83.10.1002/suco.201200047 ↗
28. Wang J, Yin Y, Luo C. Johnson–Holmquist-II (JH-2) constitutive model for rock materials: parameter determination and application in tunnel smooth blasting. Appl Sci. 2018;8:1675.10.3390/app8091675 ↗
29. Ren G-M, Wu H, Fang Q, Kong X-Z. Parameters of Holmquist–Johnson–Cook model for high-strength concrete-like materials under projectile impact. Int J Prot Struct. 2017;8:352–67.10.1177/2041419617721552 ↗
30. Paramashivaiah B, Rajashekhar C. Studies on effect of various surfactants on stable dispersion of graphene nano particles in simarouba biodiesel. IOP Conf Ser Mater Sci Eng. 2016;149:012083.10.1088/1757-899X/149/1/012083 ↗
31. Kyriazopoulos A, Anastasiadis C, Triantis D, Brown C. Non-destructive evaluation of cement-based materials from pressure-stimulated electrical emission—preliminary results. Constr Build Mater. 2011;25:1980–90.10.1016/j.conbuildmat.2010.11.053 ↗
32. Szeląg M. Evaluation of cracking patterns in cement composites—from basics to advances: a review. Materials. 2020;13:2490. https://doi.org/10.3390/ma13112490.10.3390/ma13112490 ↗
33. Stefanidou M, Papayianni I. Influence of nano-SiO2 on the Portland cement pastes. Compos B Eng. 2012;43:2706–10.10.1016/j.compositesb.2011.12.015 ↗