Mechanism of SiMo DCI HT oxidation based on complementary LM/SEM/TEM and XRD methods
Source abstract
Abstract
Abstract Cast irons intended for high temperature (HT) applications like the SiMo family are widely used in the automotive industry, however further progress in that area requires a thorough understanding of their oxidation behavior. In the present work, measurements of weight gains during cyclic HT exposition (1000 °C in air) of the SiMo5-1 (5 wt. % Si, 1 wt. % of Mo) were explained by microstructure investigation with light, scanning and transmission electron microscopy (LM, SEM, TEM). The results showed that ferrite areas and regions filled with carbides promoted two different oxidation paths. First one triggered formation of amorphous SiO 2 layer covered with Fe 3 O 4 , while the latter restricted development of the silica diffusion barrier, leading to an accelerated growth of globular Fe 2 O 3 crystallite agglomerates. With time, the oxide scale over ferrite areas thickened and transformed into a mixture of Fe 3 O 4 and α-SiO 2 phases, eventually surrounding the globules and slowing down their expansion.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Semiconductor materials and devices · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Stefanescu DM. A history of cast iron, in Cast Iron Science and Technology. ASM Handbook. 2017;1A:3–11.
2. Lacaze J, Dawson S, Hazotte A. Cast iron: a historical and green material worthy of continuous research. Int J Technol. 2021;21:1123–38. https://doi.org/10.14716/ijtech.v12i6.5235.10.14716/ijtech.v12i6.5235 ↗
3. de Magalhaes MM, Lemos GVB, Froehlich A, Piaggio H, Clarke T, Reguly A. Microstructure and mechanical properties of SiMo ductile cast irons alloys with varied Mo and Nb contents. J Mater Res Technol. 2024;30:6301–8. https://doi.org/10.1016/j.jmrt.2024.05.029.10.1016/j.jmrt.2024.05.029 ↗
4. Stan SC, Chisamera M, Riposan I, Neacsu EL, Cojocaru AM. Structure Characteristics of Silicon Alloyed Ductile Cast Iron, 7th Int. Conf. on Advanced Materials and Structures - AMS 2018, IOP Conf. Series: Mat. Sci. and Eng. 416: 012077. (2018). https://doi.org/10.1088/1757-899X/416/1/01207710.1088/1757-899X/416/1/012077 ↗
5. Chen X-R, Zhai Q-J, Dong H, Dai B-H, Mohrbacher H. Molybdenum alloying in cast iron and steel. Adv Manuf. 2020;8:3–14. https://doi.org/10.1007/s40436-019-00282-1.10.1007/s40436-019-00282-1 ↗
6. Ibrahim MM, Nofal A, Mourad MM. Microstructure and hot oxidation resistance of SiMo ductile cast irons containing Si-Mo-Al. Metall Mater Trans B. 2017;48:1149–57. https://doi.org/10.1007/s11663-016-0871-y.10.1007/s11663-016-0871-y ↗
7. de la Torre U, Sertucha J, Regordosa A, Lacaze J. Effect of silicon on the metastable eutectic temperature of Fe–C–Si alloys. Metall Mater Trans B. 2023;54:650–60. https://doi.org/10.1007/s11663-022-02715-y.10.1007/s11663-022-02715-y ↗
8. Fraś E, Górny M, Lopez H. Thin wall ductile iron castings as substitutes for aluminium alloy castings. Arch Metall Mater. 2014;59:459–65. https://doi.org/10.2478/amm-2014-0076.10.2478/amm-2014-0076 ↗
9. Ibrahim MM. An overview on thin wall cast iron castings and its applications in automotive industry. Int J Mater Technol Innov. 2023;3:57–69. https://doi.org/10.21608/IJMTI.2022.153909.1056.10.21608/IJMTI.2022.153909.1056 ↗
10. Vasko A, Uhricik M, Kucharikova L, Tillova E. Microstructure, mechanical and fatigue properties of SiMo- and SiCu- nodular cast irons. Procedia Struct Integr. 2018;13:1527–32. https://doi.org/10.1016/j.prostr.2018.12.312.10.1016/j.prostr.2018.12.312 ↗
11. Roučka J, Abramová E, Kaňa V. Properties of type SiMo ductile irons at high temperatures. Arch Metall Mater. 2018;63:601–7. https://doi.org/10.24425/122383.10.24425/122383 ↗
12. Dyrlaga Ł, Zapała R, Morgiel K, Studnicki A, Szczesny A, Kopycinski D. Evaluation of microstructure and abrasive wear-resistance of medium alloy SiMo ductile cast iron. Materials Basel. 2024;17:1223. https://doi.org/10.3390/ma17051223.10.3390/ma17051223 ↗
13. Ekström M. Oxidation and corrosion fatigue aspects of cast exhaust manifolds, PhD. Thesis, KTH Royal Institute of Technology, US-AB, Stockholm, Sweden 2015, ISBN 978–91–7595–476–9
14. Tholence F, Norell M. High temperature corrosion of cast alloys in exhaust environments I-ductile cast irons. Oxid Met. 2008;69:13–36. https://doi.org/10.1007/s11085-007-9081-y.10.1007/s11085-007-9081-y ↗
15. Lekakh SN, Bofah A, Osei R, O’Malley R, Godlewski L, Li M. High temperature oxidation and decarburization of SiMo cast iron in air and combustion atmospheres. Oxid Met. 2021;95:251–68.10.1007/s11085-021-10022-1 ↗
16. Celik GA, Atapek H, Polat S. Initial oxidation stage of SiMo and SiNb-xAl ductile cast irons in air and CO2-containing atmospheres. Int J Met. 2023;17:1763–77.
17. Lekakh SN, Bofah A, Chen W-T, Godlewski LA, Li M. Prevention of high temperature surface degradation in SiMo cast irons by Cr and Al alloying. Metall Mater Trans. 2020;51B:2542–54.10.1007/s11663-020-01975-w ↗
18. Lekakh SN, Bofah A, Godlewski LA, Li M. Effect of micro-structural dispersity of SiMo ductile iron on HT performance during static oxidation. Metals. 2022;12:661.10.3390/met12040661 ↗
19. Lekakh SN, Johnson C, Godlewski L, Li M. Control of high-temperature static and transient thermomechanical behaviour of SiMo ductile iron by Al alloying. Int J Met. 2023;17:22–38. https://doi.org/10.1007/s40962-022-00768-y.10.1007/s40962-022-00768-y ↗
20. Ebel A, Marsan O, Lacaze J, Malard B. Cyclic oxidation of high silicon spheroidal graphite iron. Corros Sci. 2021;192:109854. https://doi.org/10.1016/j.corsci.2021.109854.10.1016/j.corsci.2021.109854 ↗
21. Stawarz M, Nuckowski PM. Effect of Mo addition on the chemical corrosion process of SiMo cast iron. Materials. 2020;13:1745. https://doi.org/10.3390/ma13071745.10.3390/ma13071745 ↗
22. Ebel A, Brou SY, Malard B, Lacaze J, Monceau D, Vaissière L. HT oxidation of high silicon SiMo spheroidal cast iron in air with in situ change in H2O content. Mater Sci Forum. 2017;925:353–60. https://doi.org/10.4028/www.scientific.net/MSF.925.353.10.4028/www.scientific.net/MSF.925.353 ↗
23. Stawarz M, Nuckowski PM. Corrosion behavior of SiMo cast iron under controlled conditions. Materials. 2022;15:3225. https://doi.org/10.3390/ma15093225.10.3390/ma15093225 ↗
24. Lin M-B, Wang C-J, Volinsky AA. High temperature oxidation behavior of flake and spheroidal graphite cast irons. Oxid Met. 2011;76:161–8. https://doi.org/10.1007/s11085-011-9244-8.10.1007/s11085-011-9244-8 ↗
25. Ekstrom M, Szakalos P, Jonsson S. Influence of Cr and Ni on high-temperature corrosion behavior of ferritic ductile cast iron in air and exhaust gases. Oxid Met. 2013;80:455–66. https://doi.org/10.1007/s11085-013-9389-8.10.1007/s11085-013-9389-8 ↗
26. Brady MP, Muralidharan G, Leonard DN, Haynes JA, Weldon RG, England RD. Long-term oxidation of candidate cast iron and stainless steel exhaust system alloys from 650 to 800 °C in air with water vapour. Oxid Met. 2014;82:359–81. https://doi.org/10.1007/s11085-014-9496-1.10.1007/s11085-014-9496-1 ↗
27. Lekakh SN, Tucker W, Bofah A, Selly T, Godlewski T, Li M. Quantitative µ-CT analysis of scale topology formed during oxidation of high SiMo cast iron. Oxid Met. 2020;94:251–64. https://doi.org/10.1007/s11085-020-09989-0.10.1007/s11085-020-09989-0 ↗
28. Morgiel K, Dyrlaga Ł, Kopyciński D. Investigation of M6C and M7C3 carbides in SiMo ductile cast iron alloyed with Al and Cr. J Alloys Compd. 2025;1020:179480.10.1016/j.jallcom.2025.179480 ↗
29. Kobayashi T, Yamamoto H. Development of high toughness in austempered type ductile cast iron and evaluation of its properties. Metall Trans AIME. 1988;19A:319. https://doi.org/10.1007/BF02652541.10.1007/BF02652541 ↗
30. Guo Q, Yang Z, Guo D, Tao D, Guo Y, Li J, et al. Research on the oxidation mechanism of vermicular graphite cast iron. Materials. 2019;12:3130. https://doi.org/10.3390/ma12193130.10.3390/ma12193130 ↗
31. Ebel A, Brou SY, Malard B, Lacaze J, Monceau D, Vaissière L. High-temperature oxidation of a high silicon SiMo spheroidal cast iron in air with in situ change in H2O content. Mater Sci Forum. 2017;925:353–60.10.4028/www.scientific.net/MSF.925.353 ↗
32. Tercelj M, Burja J, Kugler G, Mrvar P. Thermal fatigue degradation progress in SiMo ductile cast iron under oxidation conditions. Eng Fail Anal. 2024;156:107823. https://doi.org/10.1016/j.engfailanal.2023.107823.10.1016/j.engfailanal.2023.107823 ↗
33. Somrerk C, Tummaporn T, Pongpankasame J. High temperature oxidation of Al-alloyed SiMo cast iron in CO2-containing atmospheres. Adv Mater Res. 2013;813:132–5.10.4028/www.scientific.net/AMR.813.132 ↗
34. Yilmaz R, Bayata F, Solak N. High temperature oxidation behavior of high Al-Si alloyed vermicular graphite cast iron for internal combustion engine’s hot-end exhaust components. Metals. 2024;14:574.10.3390/met14050574 ↗
35. Chandra-Ambhorn S, Thublaor T, Pongpankasame J. High temperature oxidation of Al-alloyed SiMo cast iron, in CO2-containing atmospheres. Adv Mater Res. 2013;813:132–5.10.4028/www.scientific.net/AMR.813.132 ↗
36. Wu X, Quan G, Macneil R, Zhang Z, Sloss C. Failure mechanisms and damage model of ductile cast iron under low-cycle fatigue conditions. Metall Mater Trans A. 2014. https://doi.org/10.1007/s11661-014-2468-x.10.1007/s11661-014-2468-x ↗
37. Zhu W, Pint BA, Huo Y, Godlewski L, Ghaffari B, Lekakh S, et al. The oxidation of the HiSiMo cast irons alloyed with Cr/Al at 800 °C. Oxid Met. 2022;97:441–9. https://doi.org/10.1007/s11085-022-10098-3.10.1007/s11085-022-10098-3 ↗
38. Morgiel K, Dyrlaga Ł, Kopyciński D, Morgiel J. Investigation of M6C and M7C3 carbides in SiMo ductile cast iron alloyed with Al and Cr. J Alloys Compd. 2025;1020:179480.10.1016/j.jallcom.2025.179480 ↗
39. Papis KJ, Tunzini S, Menk W. Cast iron alloys for exhaust applications, 10th International Symposium on the Science and Processing of Cast Iron – SPCI10, 13.11.2014
40. Babukutty B, Ponnamma D, Nair SS, Jose J, Bhat SG, Thomas S. Structural influence of chromium substituted magnetite ferrofluids on the optical and antibacterial characteristics. Mater Today Commun. 2023. https://doi.org/10.1016/j.mtcomm.2023.105439.10.1016/j.mtcomm.2023.105439 ↗