Erosion patterns of ultrasonic pulsating water jet on aluminum with extended tubular nozzle
Source abstract
Abstract
Abstract This paper presents a controlled experimental investigation into the erosion evolution induced by a 20 kHz ultrasonic pulsating water jet, focusing on its potential for precise material removal. Water droplet volumes of V = 1.53 mm 3 were generated and applied to aluminum samples at a pressure of p = 15 MPa. Utilizing extended long nozzles with diameters of 0.4, 0.5, and 0.6 mm, erosion patterns were examined over time intervals ranging from 0.25 to 4 s, with increments of 0.25 s. Scanning Electron Microscopy analysis revealed a progressive degradation process, starting with initial pitting and evolving into complex crater formations. For the 0.6 mm nozzle at 0.25 s, a distinct 'corona jet' footprint indicated a hollow cone jet presence, with erosion activity predominantly by the peripheral thin pulsating part. Quantitative analysis showed a non-linear, often logarithmic, increase in erosion depth, hypothesized to result from a negative feedback mechanism where surface roughening reduces the impact pressure peak and disrupts droplet surface tension. Eroded volume, conversely, exhibited a more linear increase. Furthermore, detailed SEM of craters, such as the open cavity observed at the edge of a 0.5 mm nozzle crater after 4 s, confirmed significant material fracture and removal driven by the hydrodynamic action of the high-frequency pulsating water jet.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Erosion and Abrasive Machining · Fluid Dynamics and Heat Transfer · Particle Dynamics in Fluid Flows
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Vijay F. Ultrasonic modulation of the jet. In: 12 Th International Conference on Jet Cutting Technology. 1994, pp. 15–35.
2. Ghasemian Fard M, Nag A, Petrů J, Hloch S. Towards sustainable precision: a review of water jet meso and micromachining. Results Eng. 2025;27:106447. https://doi.org/10.1016/j.rineng.2025.106447.10.1016/j.rineng.2025.106447 ↗
3. Foldyna J. Use of acoustic waves for pulsating water jet generation. In: Acoustic Waves-From Microdevices to Helioseismology. InTech. 2011.10.5772/18862 ↗
4. Nag A, Dixit AR, Petrů J, Váňová P, Konečná K, Hloch S. Maximization of wear rates through effective configuration of standoff distance and hydraulic parameters in ultrasonic pulsating water jet. Facta Univ Ser Mech Eng. 2022. https://doi.org/10.22190/FUME220523045N.10.22190/FUME220523045N ↗
5. Nag A, Hloch S. Disintegration of bone cement using pulsating water jet: a comparative study of standard and extended nozzles. Spect Mech Eng Oper Res. 2025;2:93–103. https://doi.org/10.31181/smeor21202525.10.31181/smeor21202525 ↗
6. Hloch S, den Dunnen S, Nag A, Souček K, Foldyna J, Tuijthof G, et al. Atmospheric and submerged bone cement erosion by a pulsating water jet with a straight tubular nozzle extension. Sci Rep. 2025;15:6224. https://doi.org/10.1038/s41598-025-91213-7.10.1038/s41598-025-91213-7 ↗
7. Szada-Borzyszkowska M, Kacalak W, Banaszek K, Borkowski PJ, Szada-Borzyszkowski W. Analysis of the pulsating properties of a high-pressure water jet generated in a self-excited head for erosion processing. Arch Civil Mech Eng. 2023. https://doi.org/10.1007/s43452-023-00769-6.10.1007/s43452-023-00769-6 ↗
8. Wang P, Li Z, Ni H, Liu Y, Dou P. Experimental study of rock breakage of an interrupted pulsed waterjet. Energy Rep. 2020;6:713–20.10.1016/j.egyr.2020.03.018 ↗
9. Szada-Borzyszkowska M, Kacalak W, Banaszek K, Pude F, Perec A, Wegener K, et al. Assessment of the effectiveness of high-pressure water jet machining generated using self-excited pulsating heads. Int J Adv Manuf Technol. 2024. https://doi.org/10.1007/s00170-024-14040-6.10.1007/s00170-024-14040-6 ↗
10. Adler WF. The mechanics of liquid impact, Academic Press, Treatise on. Mater Sci Technol. 1979;16:127–83.
11. Cook SS. Erosion by water-hammer. Proc R Soc Lond Ser A Contain Papers Math Phys Char. 1928;119:481–8. https://doi.org/10.1098/rspa.1928.0107.10.1098/rspa.1928.0107 ↗
12. Heymann FJ. On the shock wave velocity and impact pressure in high-speed liquid-solid impact. J Basic Eng. 1968;90:400–2. https://doi.org/10.1115/1.3605114.10.1115/1.3605114 ↗
13. Cook SS. Erosion by water-hammer. Proc R Soc Lond Ser A Contain Papers Math Phys Char. 1928;119:481–8.
14. Field JE. ELSI conference: invited lecture liquid impact: theory, experiment, applications. In: Wear. 1999; pp. 1–12. https://doi.org/10.1016/S0043-1648(99)00189-1.10.1016/S0043-1648(99)00189-1 ↗
15. Yang C, Hou S, Xu J, Zhang Y, Zheng Y, Fernandez-Rodriguez E, et al. Multicomponentwater effects on rotating machines disk erosion. Water. 2020. https://doi.org/10.3390/w12030757.10.3390/w12030757 ↗
16. Vijay MM, Remisz J, Shen X. Potential of pulsed water jets for cutting and fracturing of hard rock formations. Int J Surf Min Reclam Environ. 1993;7:121–32. https://doi.org/10.1080/17480939308547572.10.1080/17480939308547572 ↗
17. Siahpour P, Amegadzie MY, Shakerin S, Tieu A, Donaldson IW, Harding M, et al. Ultrasonic pulsed waterjet peening of Ti-6Al-4 V manufactured by laser powder bed fusion. Surf Coat Technol. 2025;501:131931. https://doi.org/10.1016/j.surfcoat.2025.131931.10.1016/j.surfcoat.2025.131931 ↗
18. Stolárik G, Svobodová J, Klichová D, Nag A, Hloch S. Titanium surface roughening with ultrasonic pulsating water jet. J Manuf Process. 2023;90:341–56. https://doi.org/10.1016/j.jmapro.2023.02.013.10.1016/j.jmapro.2023.02.013 ↗
19. Liu C, Liu G, Yan Z. Study on cleaning effect of different water flows on the pulsed cavitating jet nozzle. Shock Vib. 2019;2019:1496594. https://doi.org/10.1155/2019/1496594.10.1155/2019/1496594 ↗
20. Nastic A, Vijay M, Tieu A, Jodoin B. High speed water droplet impact erosive behavior on dry and wet pulsed waterjet treated surfaces. Phys Fluids. 2023. https://doi.org/10.1063/5.0147698.10.1063/5.0147698 ↗
21. Chlupová A, Poloprudský J, Nag A, Klichová D, Souček K, Pude F, et al. Micro-computed tomography (micro-CT) quantification of erosion wear and delamination of carbon fiber reinforced polymers (CFRP). Wear. 2025. https://doi.org/10.1016/j.wear.2025.205957.10.1016/j.wear.2025.205957 ↗
22. Soyama H. Comparison between the improvements made to the fatigue strength of stainless steel by cavitation peening, water jet peening, shot peening and laser peening. J Mater Process Technol. 2019;269:65–78.10.1016/j.jmatprotec.2019.01.030 ↗
23. Li H, Liu S, Jia J, Wang F, Guo C. Numerical simulation of rock-breaking under the impact load of self-excited oscillating pulsed waterjet. Tunnell Undergr Space Technol. 2020. https://doi.org/10.1016/j.tust.2019.103179.10.1016/j.tust.2019.103179 ↗
24. Dehkhoda S, Hood M. An experimental study of surface and sub-surface damage in pulsed water-jet breakage of rocks. Int J Rock Mech Min Sci. 2013;63:138–47. https://doi.org/10.1016/j.ijrmms.2013.08.013.10.1016/j.ijrmms.2013.08.013 ↗
25. Liu Y, Wei J, Ren T, Lu Z. Experimental study of flow field structure of interrupted pulsed water jet and breakage of hard rock. Int J Rock Mech Min Sci. 2015;78:253–61. https://doi.org/10.1016/j.ijrmms.2015.06.005.10.1016/j.ijrmms.2015.06.005 ↗
26. Nag A, Stolarik G, Hloch S. Comparison of the effects of standard nozzles and extension tubes on the erosion of pmma using pulsating water jet technology. MM Sci J. 2024. https://doi.org/10.17973/MMSJ.2024_11_2024099.10.17973/MMSJ.2024_11_2024099 ↗
27. Foldyna J, Svehla B. Patent application publication (10) Pub . No .: US 2008 / 0135638 A1. 2008.
28. Nag A, Stolárik G, Svehla B, Hloch S. Effect of water flow rate on operating frequency and power during acoustic chamber tuning. In: Advances in Manufacturing Engineering and Materials II: Proceedings of the International Conference on Manufacturing Engineering and Materials (ICMEM 2020), 21–25 June, 2021, Nový Smokovec, Slovakia, Springer International Publishing. 2021; pp. 142–154.10.1007/978-3-030-71956-2_13 ↗
29. Di J, Ji J, Xu J, Li Z, Ning K, Peng C, et al. Experimental investigation on the effect of solid particle erosion on the water droplet erosion damages for blade materials. Sci Rep. 2025;15:1–15.10.1038/s41598-025-02230-5 ↗
30. Wang X, Chen S, Xu J, Li Y, Gao G, Chen J. Comparative study on the water droplet erosion behavior between stretched and casted aeronautical PMMA. Int J Impact Eng. 2024;183:104806.10.1016/j.ijimpeng.2023.104806 ↗
31. Mitchell BR, Korkolis YP, Kinsey BL. Erosion characteristics of water droplet machining. J Mater Process Technol. 2024;327:118359.10.1016/j.jmatprotec.2024.118359 ↗
32. Sapoval B. L’universalité des formes fractales dans la nature. Gazette Des Mathematiciens. 2013;9–20.
33. Nag A, Srivastava M, Petrů J, Váňová P, Srivastava AK, Hloch S. Comparison of continuous and pulsating water jet during piercing of ductile material. Materials. 2023;16:3558. https://doi.org/10.3390/ma16093558.10.3390/ma16093558 ↗
34. Kirols HS, Kevorkov D, Uihlein A, Medraj M. The effect of initial surface roughness on water droplet erosion behaviour. Wear. 2015;342:198–209. https://doi.org/10.1016/j.wear.2015.08.019.10.1016/j.wear.2015.08.019 ↗
35. Di J, Wang S, Yan X, Cai L, Xie Y. Experimental investigation on effect of surface strengthening process and roughness on water droplet erosion behavior in turbomachinery. Tribol Int. 2021;153:106647.10.1016/j.triboint.2020.106647 ↗
36. Fujisawa K, Ohki M, Fujisawa N. Influence of surface roughness on liquid droplet impingement erosion. Wear. 2019;432:202955.10.1016/j.wear.2019.202955 ↗
37. Hloch S, Souček K, Svobodová J, Chlupová A, Nag A. On the subsurface erosion, micro-tunneling and deformation induced by high-frequency droplet impingement in gravity-cast aluminum, analyzed through micro-computed tomography. Results Eng. 2025. https://doi.org/10.1016/j.rineng.2025.105669.10.1016/j.rineng.2025.105669 ↗
38. Hloch S, Svobodová J, Srivastava AK, Srivastava M, Poloprudský J, Nag A. Submerged pulsating water jet erosion of ductile material. Wear. 2024. https://doi.org/10.1016/j.wear.2024.205243.10.1016/j.wear.2024.205243 ↗
39. Foldyna J, Sitek L, Ščučka J, Martinec P, Valíček J, Páleníková K. Effects of pulsating water jet impact on aluminium surface. J Mater Process Technol. 2009;209(2009):6174–80. https://doi.org/10.1016/j.jmatprotec.2009.06.004.10.1016/j.jmatprotec.2009.06.004 ↗
40. Petru J, Skorepa R, Nag A, Stolarik G, Hloch S. Evaluation of erosion resistance of additive 3d printed materials under continuous and pulsating water jet exposure. MM Sci J. 2025. https://doi.org/10.17973/MMSJ.2025_03_2025006.10.17973/MMSJ.2025_03_2025006 ↗
41. Poloprudský J, Nag A, Kruml T, Hloch S. Effects of liquid droplet volume and impact frequency on the integrity of Al alloy AW2014 exposed to subsonic speeds of pulsating water jets. Wear. 2022. https://doi.org/10.1016/j.wear.2021.204136.10.1016/j.wear.2021.204136 ↗
42. Vavro L, Vavro M, Nag A, Klichová D, Stolárik G, Gupta MK, et al. Erosive wear behavior of sandstone under low-pressure pulsating water jet. Tribol Int. 2025;203:110411. https://doi.org/10.1016/j.triboint.2024.110411.10.1016/j.triboint.2024.110411 ↗
43. Foldyna J, Sitek L, Martinec P, Ščučka J, Jekl P, Młynarczuk M. Rock cutting by pulsing water jets. In: Impact of human activity on the geological environment—proceedings of the international symposium of the international society for rock mechanics, Eurock 2005. 2005.
44. Sitek L, Foldyna J, Souček K. Shaping of rock specimens for testing of uniaxial tensile strength by high speed abrasive water jet: first experience. In: Impact of human activity on the geological environment—proceedings of the international symposium of the international society for rock mechanics, Eurock 2005. 2005.