Multifunctional properties of cellular composites based on smart materials for energy-absorbing applications
Source abstract
Abstract
This study aims to develop and evaluate conductive smart composite sponges (CSs) that integrate shear thickening fluids (STFs) and shear stiffening polymers (SSPs) with carbon nanotubes (CNTs) for multifunctional energy absorption (EA) applications. Rheological tests revealed that the shear thickening (ST) range of STF increased with CNT content, significantly enhancing the mechanical performance of SSP. Microstructural analysis revealed a uniform dispersion of CNTs in both the STF and SSP matrices. Electrical conductivity tests indicated that the percolation threshold for pure suspensions (STF-CNT and SSP-CNT) was lower than that for impregnated sponges (CS-STF-CNT and CS-SSP-CNT), suggesting that CNTs could form conductive networks at lower concentrations in suspensions due to reduced path length and higher mobility. Quasi-static compressive tests revealed that incorporating STF and SSP into the sponge enhanced its compressive strength, while the addition of CNTs significantly improved it. Dynamic impact tests, including force–time curves, peak reaction force (PRF), and EA improvement, consistently indicated that SSP and CNTs significantly enhanced the composites’ energy dissipation compared to other prepared samples. In particular, CS-SSP-CNT exhibits the best performance, absorbing nearly 70% of the impact energy and achieving a 95% improvement in EA. These findings make the designed CSs promising candidates for certain engineering applications that require superior energy dissipation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Advanced Theoretical and Applied Studies in Material Sciences and Geometry · Advanced Energy Technologies and Civil Engineering Innovations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Ge C. A comparative study between felted and triaxial compressed polymer foams on cushion performance. J Cell Plast. 2013;49:521–33. https://doi.org/10.1177/0021955X13503844.10.1177/0021955X13503844 ↗
2. Li J, Zhou Y, Sheikhi MR, Gürgen S. Enhanced compression properties of open-cell foams reinforced with shear-thickening fluids and shear-stiffening polymers. Polymers. 2025;17: 1218. https://doi.org/10.3390/polym17091218.10.3390/polym17091218 ↗
3. Weldemhret TG, Park YT, Song JI. Recent progress in surface engineering methods and advanced applications of flexible polymeric foams. Adv Colloid Interface Sci. 2024;326: 103132. https://doi.org/10.1016/j.cis.2024.103132.10.1016/j.cis.2024.103132 ↗
4. Cao L, Fu Q, Si Y, Ding B, Yu J. Porous materials for sound absorption. Compos Commun. 2018;10:25–35. https://doi.org/10.1016/j.coco.2018.05.001.10.1016/j.coco.2018.05.001 ↗
5. Paulino M, Teixeira-Dias F. On the use of polyurethane foam paddings to improve passive safety in crashworthiness applications. In: Polyurethane. InTech; 2012. https://doi.org/10.5772/47996.10.5772/47996 ↗
6. Göransson P. Acoustic and vibrational damping in porous solids. Philos Trans R Soc Lond A Math Phys Eng Sci. 2006;364:89–108. https://doi.org/10.1098/rsta.2005.1688.10.1098/rsta.2005.1688 ↗
7. Ates M, Karadag S, Eker AA, Eker B. Polyurethane foam materials and their industrial applications. Polym Int. 2022;71:1157–63. https://doi.org/10.1002/pi.6441.10.1002/pi.6441 ↗
8. Sheikhi MR, Hasanzadeh M, Gürgen S, Li J. Enhanced anti-impact resistance of polyurethane foam composites with multi-phase shear thickening fluids containing various carbon nanofillers. Mater Today Commun. 2024;38: 107991. https://doi.org/10.1016/j.mtcomm.2023.107991.10.1016/j.mtcomm.2023.107991 ↗
9. Zhao C, Gong X, Wang S, Jiang W, Xuan S. Shear stiffening gels for intelligent anti-impact applications. Cell Rep Phys Sci. 2020;1: 100266. https://doi.org/10.1016/j.xcrp.2020.100266.10.1016/j.xcrp.2020.100266 ↗
10. Wei M, Lin K, Sun L. Shear thickening fluids and their applications. Mater Des. 2022;216: 110570. https://doi.org/10.1016/j.matdes.2022.110570.10.1016/j.matdes.2022.110570 ↗
11. Wang Y, Wang S, Xu C, Xuan S, Jiang W, Gong X. Dynamic behavior of magnetically responsive shear-stiffening gel under high strain rate. Compos Sci Technol. 2016;127:169–76. https://doi.org/10.1016/j.compscitech.2016.03.009.10.1016/j.compscitech.2016.03.009 ↗
12. Wang S, Jiang W, Jiang W, Ye F, Mao Y, Xuan S, Gong X. Multifunctional polymer composite with excellent shear stiffening performance and magnetorheological effect. J Mater Chem C. 2014;2:7133–40. https://doi.org/10.1039/C4TC00903G.10.1039/C4TC00903G ↗
13. Rathinavel S, Priyadharshini K, Panda D. A review on carbon nanotube: an overview of synthesis, properties, functionalization, characterization, and the application. Mater Sci Eng, B. 2021;268: 115095. https://doi.org/10.1016/j.mseb.2021.115095.10.1016/j.mseb.2021.115095 ↗
14. Sheikhi MR, Gürgen S. Intelligent polymers for multi-functional applications: mechanical and electrical aspects. Polymers. 2023;15: 2620. https://doi.org/10.3390/polym15122620.10.3390/polym15122620 ↗
15. Sheikhi MR, Bayrak K, Ozdemir E, Gürgen S. Force attenuation performance in sandwich structures with STF and M-STF encapsulation. Heliyon. 2024;10: e27186. https://doi.org/10.1016/j.heliyon.2024.e27186.10.1016/j.heliyon.2024.e27186 ↗
16. He Q, Cao S, Wang Y, Xuan S, Wang P, Gong X. Impact resistance of shear thickening fluid/Kevlar composite treated with shear-stiffening gel. Compos Part A Appl Sci Manuf. 2018;106:82–90. https://doi.org/10.1016/j.compositesa.2017.12.019.10.1016/j.compositesa.2017.12.019 ↗
17. Kaewpradit P, Kongchoo A, Chonlathan P, Lehman N, Kalkornsurapranee E. Impact responses of an open-cell natural rubber foam impregnated with shear thickening fluid. SPE Polym. 2021;2:217–23. https://doi.org/10.1002/pls2.10052.10.1002/pls2.10052 ↗
18. Liu X, Qian C, Yu K, Jiang Y, Fu Q, Qian K. Energy absorption and low-velocity impact response of shear thickening gel reinforced polyurethane foam. Smart Mater Struct. 2020;29: 045018. https://doi.org/10.1088/1361-665X/ab73e2.10.1088/1361-665X/ab73e2 ↗
19. Srivastava A, Majumdar A, Butola BS. Improving the impact resistance of textile structures by using shear thickening fluids: a review. Crit Rev Solid State Mater Sci. 2012;37:115–29. https://doi.org/10.1080/10408436.2011.613493.10.1080/10408436.2011.613493 ↗
20. Zhang S, Wang S, Wang Y, Fan X, Ding L, Xuan S, Gong X. Conductive shear thickening gel/polyurethane sponge: a flexible human motion detection sensor with excellent safeguarding performance. Compos Part A Appl Sci Manuf. 2018;112:197–206. https://doi.org/10.1016/j.compositesa.2018.06.007.10.1016/j.compositesa.2018.06.007 ↗
21. Liu X, Huo J, Li T-T, Wang H, Wu L, Lin J-H, Lou C-W. Mechanical properties of a STF capsule filled flexible polyurethane composite foam. Mater Lett. 2020;269: 127580. https://doi.org/10.1016/j.matlet.2020.127580.10.1016/j.matlet.2020.127580 ↗
22. Zhao F, Wu L, Lu Z, Lin J-H, Jiang Q. Design of shear thickening fluid/polyurethane foam skeleton sandwich composite based on non-Newtonian fluid solid interaction under low-velocity impact. Mater Des. 2022;213: 110375. https://doi.org/10.1016/j.matdes.2021.110375.10.1016/j.matdes.2021.110375 ↗
23. Fernandes TRM, Serra GF, de Sousa RJA, Fernandes FAO. The influence of novel 3D shear thickening fluid reinforcements in the mechanical behavior of hybrid composites under impact loading. Arch Civil Mech Eng. 2025;25:113. https://doi.org/10.1007/s43452-025-01166-x.10.1007/s43452-025-01166-x ↗
24. Fernandes TRM, Alves de Sousa RJ, Fernandes FAO. Multilayered cork-STF composite structures enhanced with laser texturing for impact mitigation. Int J Adv Manuf Technol. 2025;136:97–107. https://doi.org/10.1007/s00170-024-13815-1.10.1007/s00170-024-13815-1 ↗
25. Serra GF, Oliveira L, Novais RM, de Sousa RJA, Fernandes FAO. Multilayered cork composites for safety purpose in e-micromobility. In: Guarding with cork: a sustainable solution for protection. Cham: Springer Nature Switzerland; 2025. p. 45–59. https://doi.org/10.1007/978-3-031-72882-2_4.10.1007/978-3-031-72882-2_4 ↗
26. Oliveira L, Serra GF, Gürgen S, Novais RM, de Sousa RJA, Fernandes FAO. Shear thickening fluids in cork composites for impact mitigation: the role of fumed silica concentration. Arch Civil Mech Eng. 2024;24:92. https://doi.org/10.1007/s43452-024-00909-6.10.1007/s43452-024-00909-6 ↗
27. Sheikhi MR, Sofuoğlu MA, Chen Z. Shear thickening fluid integrated sandwich structures for vibration isolation. In: Shear thickening fluid. Cham: Springer International Publishing; 2023. p. 27–40. https://doi.org/10.1007/978-3-031-35521-9_3.10.1007/978-3-031-35521-9_3 ↗
28. Yanen C, Solmaz MY, Aydoğmuş E, Arslanoğlu H. Effects of molecular weight of polyethylene glycol with size and ratio of fumed silica on rheological behavior of shear thickening fluid. Mater Chem Phys. 2024;312: 128624. https://doi.org/10.1016/j.matchemphys.2023.128624.10.1016/j.matchemphys.2023.128624 ↗
29. Carosio F, Fina A. Three organic/inorganic nanolayers on flexible foam allow retaining superior flame retardancy performance upon mechanical compression cycles. Front Mater. 2019. https://doi.org/10.3389/fmats.2019.00020.10.3389/fmats.2019.00020 ↗
30. Kumar R, Mondal DP, Chaudhary A, Shafeeq M, Kumari S. Excellent EMI shielding performance and thermal insulating properties in lightweight, multifunctional carbon-cenosphere composite foams. Compos Part A Appl Sci Manuf. 2018;112:475–84. https://doi.org/10.1016/j.compositesa.2018.07.003.10.1016/j.compositesa.2018.07.003 ↗
31. Gürgen S, Kuşhan MC, Li W. Shear thickening fluids in protective applications: a review. Prog Polym Sci. 2017;75:48–72. https://doi.org/10.1016/j.progpolymsci.2017.07.003.10.1016/j.progpolymsci.2017.07.003 ↗
32. Sheikhi MR, Hasanzadeh M, Gürgen S. The role of conductive fillers on the rheological behavior and electrical conductivity of multi-functional shear thickening fluids (M-STFs). Adv Powder Technol. 2023;34: 104086. https://doi.org/10.1016/j.apt.2023.104086.10.1016/j.apt.2023.104086 ↗
33. Gürgen S, Sofuoğlu MA, Kuşhan MC. Rheological modeling of multi-phase shear thickening fluid using an intelligent methodology. J Braz Soc Mech Sci Eng. 2020;42: 605. https://doi.org/10.1007/s40430-020-02681-z.10.1007/s40430-020-02681-z ↗
34. Gürgen S, Sofuoğlu MA, Kuşhan MC. Rheological compatibility of multi-phase shear thickening fluid with a phenomenological model. Smart Mater Struct. 2019;28: 035027. https://doi.org/10.1088/1361-665X/ab018c.10.1088/1361-665X/ab018c ↗
35. Gürgen S, Yıldız T. Stab resistance of smart polymer coated textiles reinforced with particle additives. Compos Struct. 2020;235: 111812. https://doi.org/10.1016/j.compstruct.2019.111812.10.1016/j.compstruct.2019.111812 ↗
36. Sultan M, Khan SU, Kanwal F, Islam A, Rafiq K, Hafeez S, Gull N, Shafiq M, Khan RU. Silica nanoparticle-doped polyurethane membranes for reverse osmosis applications. Chem Pap. 2020;74:2837–48. https://doi.org/10.1007/s11696-020-01124-2.10.1007/s11696-020-01124-2 ↗
37. Francés AB, Bañón MVN. Effect of silica nanoparticles on polyurethane foaming process and foam properties. IOP Conf Ser Mater Sci Eng. 2014;64: 012020. https://doi.org/10.1088/1757-899X/64/1/012020.10.1088/1757-899X/64/1/012020 ↗
38. Pessoa RS, dos Santos VP, Cardoso SB, Doria ACOC, Figueira FR, Rodrigues BVM, Testoni GE, Fraga MA, Marciano FR, Lobo AO, Maciel HS. TiO2 coatings via atomic layer deposition on polyurethane and polydimethylsiloxane substrates: properties and effects on C. albicans growth and inactivation process. Appl Surf Sci. 2017;422:73–84. https://doi.org/10.1016/j.apsusc.2017.05.254.10.1016/j.apsusc.2017.05.254 ↗
39. Zhao F, Chen H, Gu H, Jiang Q, Lu Z, Wu L. Effect of shear stiffening gel rheology on its Kevlar fabric reinforced composite under low-velocity impact. J Ind Text. 2022;51:2799S-2818S. https://doi.org/10.1177/15280837221088184.10.1177/15280837221088184 ↗
40. Rauf Sheikhi M, Gürgen S, Li J, Alper Sofuoğlu M, Hasanzadeh M, Cemal Kuşhan M, Chen Z. Design of smart sandwich structures enhanced by multi-functional shear thickening fluids (M−STFs): anti-vibration and electrical conductivity. Compos Struct. 2023;324:117520. https://doi.org/10.1016/j.compstruct.2023.117520.10.1016/j.compstruct.2023.117520 ↗
41. Wang S, Huang Y, Chang E, Zhao C, Ameli A, Naguib HE, Park CB. Evaluation and modeling of electrical conductivity in conductive polymer nanocomposite foams with multiwalled carbon nanotube networks. Chem Eng J. 2021;411: 128382. https://doi.org/10.1016/j.cej.2020.128382.10.1016/j.cej.2020.128382 ↗
42. Lee SH, An JH, Kim YJ, Lee SJ. Electrically conductive foams via high internal phase emulsions with polypyrrole-modified carbon nanotubes: morphology, properties, and rheology. Polymer. 2022;242: 124600. https://doi.org/10.1016/j.polymer.2022.124600.10.1016/j.polymer.2022.124600 ↗
43. Rajput MS, Burman M, Köll J, Hallström S. Compression of structural foam materials – experimental and numerical assessment of test procedure and specimen size effects. J Sandwich Struct Mater. 2019;21:260–88. https://doi.org/10.1177/1099636217690500.10.1177/1099636217690500 ↗
44. Lomov SV, Gorbatikh L, Verpoest I. Compression behaviour of a fibre bundle with grafted carbon nanotubes. Carbon. 2011;49:4458–65. https://doi.org/10.1016/j.carbon.2011.06.044.10.1016/j.carbon.2011.06.044 ↗
45. Zhai T, Li D, Fei G, Xia H. Piezoresistive and compression resistance relaxation behavior of water blown carbon nanotube/polyurethane composite foam. Compos Part A Appl Sci Manuf. 2015;72:108–14. https://doi.org/10.1016/j.compositesa.2015.02.003.10.1016/j.compositesa.2015.02.003 ↗
46. Park J, Howard J, Edery A, DeMay M, Wereley N. Tunable energy absorbing property of bilayer amorphous glass foam via dry powder printing. Materials. 2022;15: 9080. https://doi.org/10.3390/ma15249080.10.3390/ma15249080 ↗