journal article·2025-06-03Open access

Structure and magnetic properties of vacuum- and air-annealed rapidly quenched Mo- and Co-modified Fe85.3Cu0.7B14 alloy

Lukasz Hawelek, Przemyslaw Zackiewicz, Mariola Kadziolka-Gawel, Anna Wojcik, Wojciech Maziarz, Robert Chulist, Margit Fábián, Tymon Warski

Abstract

Abstract In the present work, comprehensive structural and magnetic studies of the vacuum- and air-annealed, followed by rapid quenching Fe85.3Cu0.7B14 ribbons, modified by Co and Mo, have been reported. Three different alloys, i.e. Fe80.3Co5Cu0.7B14, Fe80.3Mo5Cu0.7B14, and Fe75.3Co5Mo5Cu0.7B14, were first produced in the pure amorphous state via melt-spinning technique and then characterised by X-ray diffraction and differential scanning calorimetry methods. Based on these results, the annealing process has been optimised in the temperature range between 280 and 540 °C towards improving the magnetic properties (saturation induction (Bs), coercivity (Hc), core power losses at 1 T and 50 Hz (P 10/50)). For the optimal conditions (at the minimum value of P 10/50), the complex permeability in the 104–108 Hz frequency range, together with the core power losses obtained from magnetic induction dependence up to the frequency of 400 kHz, was successfully measured. The local and average crystal structures were investigated by the X-ray and neutron diffraction complemented by transmission electron microscopy observations proving for Fe80.3Co5Cu0.7B14 alloy, the nanocrystalline phase embedded in the glassy matrix, however with the crystal growth rate restricted to only an early stage of crystallisation. In addition, better magnetic parameters of Fe80.3Co5Cu0.7B14 alloy were obtained for optimal air-annealing conditions than those of the vacuum-annealed sample. The chemical composition mapping along the air-annealed ribbon cross-section indicated an oxygen-rich layer with a thickness of about 140 nm. As shown, oxygenation has a positive impact on magnetic properties. Finally, the vacuum- and air-annealed alloys have been characterised using 57Fe Mössbauer spectrometry and transmission electron microscopy.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Magnetic Properties of Alloys · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Silveyra JM, Xu P, Keylin V, DeGeorge V, Leary A, McHenry ME. Amorphous and nanocomposite materials for energy-efficient electric motors. J Electron Mater. 2015;45:219–25. https://doi.org/10.1007/s11664-015-3968-1.10.1007/s11664-015-3968-1 ↗
2. Kolano R, Kolano-Burian A, Polak M, Szynowski J. Application of rapidly quenched soft magnetic materials in energy-saving electric equipment. IEEE Trans Magn. 2014;50:1–4. https://doi.org/10.1109/tmag.2013.2283918.10.1109/tmag.2013.2283918 ↗
3. Theisen E. Development of new amorphous and nanocrystalline magnetic materials for use in energy-efficient devices. MRS Adv. 2017;2:3409–14. https://doi.org/10.1557/adv.2017.552.10.1557/adv.2017.552 ↗
4. Silveyra JM, Ferrara E, Huber DL, Monson TC. Soft magnetic materials for a sustainable and electrified world. Science. 2018. https://doi.org/10.1126/science.aao0195.10.1126/science.aao0195 ↗
5. Lashgari HR, Chu D, Xie S, Sun H, Ferry M, Li S. Composition dependence of the microstructure and soft magnetic properties of Fe-based amorphous/nanocrystalline alloys: a review study. J Non-Cryst Solids. 2014;391:61–82. https://doi.org/10.1016/j.jnoncrysol.2014.03.010.10.1016/j.jnoncrysol.2014.03.010 ↗
6. Pavlík G, Sovák P, Konč M, Szumiata T, Brzózka K, Górka B. Magnetostriction and other properties of alloys. J Magn Magn Mater. 2006;304:e681–3. https://doi.org/10.1016/j.jmmm.2006.02.169.10.1016/j.jmmm.2006.02.169 ↗
7. Aronhime N, DeGeorge V, Keylin V, Ohodnicki P, McHenry ME. The effects of Strain-Annealing on tuning permeability and lowering losses in FE-NI-based metal amorphous nanocomposites. JOM. 2017;69:2164–70. https://doi.org/10.1007/s11837-017-2480-x.10.1007/s11837-017-2480-x ↗
8. Hawelek L, Warski T, Wlodarczyk P, Polak M, Zackiewicz P, Maziarz W, et al. The structure and magnetic properties of rapidly quenched FE72NI8NB4SI2B14 alloy. Materials. 2020;14:5. https://doi.org/10.3390/ma14010005.10.3390/ma14010005 ↗
9. Yoshizawa Y, Oguma S, Yamauchi K. New Fe-based soft magnetic alloys composed of ultrafine grain structure. J Appl Phys. 1988;64:6044–6. https://doi.org/10.1063/1.342149.10.1063/1.342149 ↗
10. Suzuki K, Parsons R, Zang B, Onodera K, Kishimoto H, Shoji T, et al. Nano-crystallization of amorphous alloys by ultra-rapid annealing: an effective approach to magnetic softening. J Alloy Compd. 2017;735:613–8. https://doi.org/10.1016/j.jallcom.2017.11.110.10.1016/j.jallcom.2017.11.110 ↗
11. Moulin J, Kaviraj B, Oubensaïd EH, Alves F, Deshpande UP, Gupta A, et al. Influence of oxygen contamination on magnetic properties of amorphous and nanocrystallized FECUSINBB thin films diffusion and defect data, solid state data. Part B, Solid State Phenomena. 2009;152–153:3–6. https://doi.org/10.4028/www.scientific.net/ssp.152-153.3.10.4028/www.scientific.net/ssp.152-153.3 ↗
12. Mariano NA, Souza CAC, May JE, Kuri SE. Influence of Nb content on the corrosion resistance and saturation magnetic density of FeCuNbSiB alloys. Mater Sci Eng, A. 2003;354:1–5. https://doi.org/10.1016/s0921-5093(02)00032-1.10.1016/s0921-5093(02)00032-1 ↗
13. Li L-J, Wang Z, Han Y. Effect of Mo addition on high-temperature soft magnetic properties for air annealed FeCo-based nanocrystalline alloys. Mater Lett. 2016;185:235–8. https://doi.org/10.1016/j.matlet.2016.08.146.10.1016/j.matlet.2016.08.146 ↗
14. Sitek J, Sedlačková K, Seberíni M. Atmospheric corrosion of different Fe-based alloys in nanocrystalline state. Czech J Phys. 2005;55:883–91. https://doi.org/10.1007/s10582-005-0090-2.10.1007/s10582-005-0090-2 ↗
15. Beltrami LVR, Kunst SR, Birriel EJ, Malfatti CDF. Magnetoelastic biosensors: corrosion protection of an FeNiMoB alloy from alkoxide precursors. Thin Solid Films. 2017;624:83–94. https://doi.org/10.1016/j.tsf.2017.01.026.10.1016/j.tsf.2017.01.026 ↗
16. Souza CAC, Ribeiro DV, Kiminami CS. Corrosion resistance of Fe-Cr-based amorphous alloys: an overview. J Non-Cryst Solids. 2016;442:56–66. https://doi.org/10.1016/j.jnoncrysol.2016.04.009.10.1016/j.jnoncrysol.2016.04.009 ↗
17. Sunbul SE, Akyol S, Onal S, Ozturk S, Sozeri H, Icin K. Effect of Co, Cu, and Mo alloying metals on electrochemical and magnetic properties of Fe-B alloy. J Alloy Compd. 2023;947: 169652. https://doi.org/10.1016/j.jallcom.2023.169652.10.1016/j.jallcom.2023.169652 ↗
18. Silveyra JM, Illeková E. Effects of air annealing on Fe–Si–B–M–Cu (M=Nb, Mo) alloys. J Alloy Compd. 2014;610:180–3. https://doi.org/10.1016/j.jallcom.2014.04.147.10.1016/j.jallcom.2014.04.147 ↗
19. Warski T, Wlodarczyk P, Polak M, Zackiewicz P, Radon A, Wojcik A, et al. Influence of CU content on structure and magnetic properties in FE86-XCUXB14 alloys. Materials. 2020;13:1451. https://doi.org/10.3390/ma13061451.10.3390/ma13061451 ↗
20. Hawelek L, Warski T, Wlodarczyk P, Polak M, Zackiewicz P, Radon A, et al. Effect of co substitution on crystallization and magnetic behavior of FE85.45−XCOXCU0.55B14 metallic glass. Materials. 2020;13:919. https://doi.org/10.3390/ma13040919.10.3390/ma13040919 ↗
21. Kong LH, Gao YL, Song TT, Wang G, Zhai QJ. Non-isothermal crystallization kinetics of FeZrB amorphous alloy. Thermochim Acta. 2011;522:166–72. https://doi.org/10.1016/j.tca.2011.02.013.10.1016/j.tca.2011.02.013 ↗
22. Hawelek L, Wlodarczyk P, Polak M, Zackiewicz P, Warski T, Wojcik A, et al. Influence of substitution on structure and magnetic properties of rapidly quenched FE86B14 alloy. Acta Physica Polonica A. 2020;137:811–4. https://doi.org/10.12693/aphyspola.137.811.10.12693/aphyspola.137.811 ↗
23. Liang XB, Kulik T, Ferenc J, Erenc-Sedziak T, Xu BS, Grabias A, et al. Mössbauer study on amorphous and nanocrystalline (Fe1−xCox)86Hf7B6Cu1 alloys. Mater Charact. 2006;58:143–7. https://doi.org/10.1016/j.matchar.2006.04.011.10.1016/j.matchar.2006.04.011 ↗
24. Conde CF, Borrego JM, Blázquez JS, Conde A, Švec P, Janičkovič D. Magnetic and structural characterization of Mo-Hitperm alloys with different Fe/Co ratio. J Alloy Compd. 2010;509:1994–2000. https://doi.org/10.1016/j.jallcom.2010.10.113.10.1016/j.jallcom.2010.10.113 ↗
25. Radoń A, Babilas R, Włodarczyk P, Zackiewicz P, Łukowiec D, Polak M, et al. Influence of copper addition and heat treatment parameters on nanocrystallization process of Fe-Co-Mo-B-Si amorphous ribbons with high saturation magnetization about 1.6 T. J Magn Magn Mater. 2019;496:165951. https://doi.org/10.1016/j.jmmm.2019.165951.10.1016/j.jmmm.2019.165951 ↗
26. Babilas R, Mariola K-G, Burian A, Temleitner L. A short-range ordering in soft magnetic Fe-based metallic glasses studied by Mössbauer spectroscopy and Reverse Monte Carlo method. J Magn Magn Mater. 2015;406:171–8. https://doi.org/10.1016/j.jmmm.2015.12.068.10.1016/j.jmmm.2015.12.068 ↗
27. Maklakov SS, Maklakov SA, Ryzhikov IA, Amelichev VA, Pokholok KV, Lagarkov AN. Mössbauer study of disordering in thin sputtered FeCo–SiO2 and FeCo films. J Alloy Compd. 2012;536:33–7. https://doi.org/10.1016/j.jallcom.2012.05.022.10.1016/j.jallcom.2012.05.022 ↗
28. Bitoh T, Makino A, Inoue A, Masumoto T. Random anisotropy model for nanocrystalline soft magnetic alloys with grain-size distribution. Mater Trans. 2003;44:2011–9. https://doi.org/10.2320/matertrans.44.2011.10.2320/matertrans.44.2011 ↗
29. Stoica M, Kumar S, Roth S, Ram S, Eckert J, Vaughan G, et al. Crystallization kinetics and magnetic properties of Fe66Nb4B30 bulk metallic glass. J Alloy Compd. 2008;483:632–7. https://doi.org/10.1016/j.jallcom.2007.11.150.10.1016/j.jallcom.2007.11.150 ↗
30. Xue L, Liu H, Dou L, Yang W, Chang C, Inoue A, et al. Soft magnetic properties and microstructure of Fe84−Nb2B14Cu nanocrystalline alloys. Mater Des (1980–2015). 2013;56:227–31. https://doi.org/10.1016/j.matdes.2013.11.008.10.1016/j.matdes.2013.11.008 ↗
31. Herzer G. Grain size dependence of coercivity and permeability in nanocrystalline ferromagnets. IEEE Trans Magn. 1990;26:1397–402. https://doi.org/10.1109/20.104389.10.1109/20.104389 ↗
32. Hoque SM, Hakim MA, Dhar U, Saha DK, Nordblad P, Paul DP. Detailed study of ultra-soft magnetic properties of Fe74Cu0.8Nb2.7Si15.5B7. Philos Mag J Theor Exp Appl Phs. 2011;91:2117–39. https://doi.org/10.1080/14786435.2010.548835.10.1080/14786435.2010.548835 ↗