A mathematical model for determining and improving rollover stability of four-wheel earthmoving vehicles with arbitrary undercarriage system design
Source abstract
Abstract
Abstract Earthmoving vehicles, especially ones with articulated frame steering, are very vulnerable to rollover. Consequently many dangerous rollover accidents occur all around the world. This problem is not only caused by difficult operating conditions and high productivity requirements. The current standards in this area do not offer an acceptable method of assessing vehicle rollover stability. Furthermore, in the previous literature there have been no research on rollover stability of increasingly common unconventional undercarriage systems, equipped with inclined/virtual oscillation and steering axes. In response to the above-mentioned situation, an innovative test vehicle, whose undercarriage system can be optionally selected (including unconventional solutions), was designed and built. The experimental stand consisted of a rotary-tilting platform equipped in wheel weighting pads and a two-axis inclinometer. Completely new experimental results were presented, proving a strong influence of unconventional undercarriage system on vehicle rollover stability. Moreover, the extensive experimental investigation was used to derive and validate an accurate and universal mathematical model, enabling to calculate and improve the rollover stability of any four-wheeled vehicle. It was also shown that a geometrical optimisation of an unconventional undercarriage system permits an increase in rollover stability—even up to several dozen percentage relative to the conventional solutions.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Agriculture and Farm Safety · Vehicle Dynamics and Control Systems · Mechanical Engineering and Vibrations Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Huston RL, Kelly FA. Another look at the static stability factor (SSF) in predicting vehicle rollover. Int J Crashworth. 2014;19:567–75.10.1080/13588265.2014.919730 ↗
2. McCann M. Heavy equipment and truck-related deaths on excavation work sites. J Saf Res. 2006;37:511–7.10.1016/j.jsr.2006.08.005 ↗
3. Özdeş T, Berber G, Çelik S. Death cases related to tractor overturns. Turk Klin J Med Sci. 2011;31:133–41.
4. Pessina D, Facchinetti D. Convegno di Medio Termine dell’Associazione Italiana di Ingegneria Agraria Belgirate, 22–24 settembre 2011 memoria n. In: Editoriali AG, editor. Ruolo Del Web Nel Monit. Belgirate: Degli Incidenti Mortali Dovuti Al Ribaltamento Dei Trattori Agric; 2011. p. 22–4.
5. Unruh DH. Mathematical model to predict tip-over stability of articulated off-road vehicle, ASME Paper, 1969.
6. Pieczonka K. Analytical methods for determining the design and operating parameters for self-propelled machines with articulated frame steering. Prace Naukowe Instytutu Konstrukcji I Eksploatacji Maszyn Politechniki Wrocławskiej (31), 1976 (in Polish).
7. Guzzomi AL. A revised kineto-static model for Phase I tractor rollover. Biosyst Eng. 2012;113:65–75.10.1016/j.biosystemseng.2012.06.007 ↗
8. Li X, Wu Y, Zhou W, Yao Z. Study on roll instability mechanism and stability index of articulated steering vehicles. Math Probl Eng. 2016;2016:1–15.
9. Siwulski T. Modelling of dynamic stability for industrial vehicles with flexible rolling parts of undercarriage. PhD thesis (supervisor prof. P. Dudziński). Department of Off -Road Machine and Vehicle Engineering at Wrocław University of Science and Technology, 2004 (in Polish).
10. Dudziński P. Steering systems for commercial vehicles. Berlin: Springer; 2005 (in German).
11. Seebohm W, Kohn P. Articulated pendulum steering system. Volvo Compact Equipment Gmbh and Co, US patent 6,932,373, 2005.
12. Dudziński P, Siwulski T. Influence of the configuration of an articulated body steer undercarriage on the rollover stability for a wheeled working machine. Transp Przem. 2006;26:78–81 (in Polish).
13. Lohse P, Muetzel F. Baumaschinen-Fahrzeug. Eisenwerk Gebrueder Frisch Kom, DE patent 1,241,719, 1964.
14. Jakobs S, Haubrich T, Klein T. Knickgelenkfahrzeug und Knickgelenkanordnung für ein solches Fahrzeug. Bomag GmbH, DE patent 201,210,014,001, 2014.
15. Ralph JB. Four wheel drive, two-engine, articulated frame tractor. Gen Motors Corp, US patent 3,157,239, 1961.
16. Bryan JF. Articulated joint for articulated vehicles, US patent 3,912,300, 1975.
17. Dershem BR, Ewing TP, Flower M. Linkage arrangement. Caterpillar Inc, US patent 8,555,746, 2013.
18. Axelsson M, Hansson R. Linkage arrangement. inventors. Husqvarna Ab, EP 2,673,181, 2013.
19. Ackermann P. Strassenwalze. Hamm AG, EP patent 1,111,134, 2001.
20. Sierzputowski G, Dudziński P. Undercarriage with adaptive adjustable steering joint and oscillating joint of the articulated body steer vehicle. Polish Patent No P.418204, 2019 (in Polish).
21. Sierzputowski G, Dudziński P, Konieczny A. Vehicle with variable structure and undercarriage system characteristics. Polish Patent No P.418203, 2019 (in Polish).
22. Dudziński P, Sierzputowski G. Innovative universal vehicle for experimental tests on roll-over stability of off-road wheeled machines and vehicles. J KONES. 2016;23:93–8.
23. Dudziński P, Sierzputowski G. New generation test equipment for experimental identification on roll-over stability in wheeled off-road machines and vehicles. In: 19th International 14th European Regional Conference ISTVS, 2017.
24. Bekker MG. Introduction to terrain-vehicle system. Ann Arbor: The University of Michigan Press; 1969.
25. Wong JY. Theory of ground vehicles. 3rd ed. New York: Wiley; 2001.
26. Wang E, Li Q, Sun G. Computational analysis and optimization of sandwich panels with homogeneous and graded foam cores for blast resistance, Thin-Walled Struct. 147 (2020). https://www.sciencedirect.com/science/article/abs/pii/S026382311931027410.1016/j.tws.2019.106494 ↗
27. Sierzputowski G. A method for modeling of stability of a vehicle with arbitrary undercarriage system design. PhD thesis (supervisor prof. P. Dudziński). Department of Off-Road Machine and Vehicle Engineering at Wrocław University of Science and Technology, 2017 (in Polish).