article·2015-04-06

Development of the multi-scale model of cold rolling based on physical and numerical investigation of ferritic–pearlitic steels

Łukasz Madej, Roman Kuziak, M. Mroczkowski, Konrad Perzyński, W. Libura, Maciej Pietrzyk

Publisher page

Abstract

Abstract With the aim of developing dual phase (DP) microstructure using a continuous annealing process, four steels with different chemical compositions were investigated in the axisymmetrical plastometric tests and during the cold rolling process. The rheological model for these steels was developed using the results of the plastometric tests and application of the inverse analysis. Load–displacement curves were used to identify parameters of the rheological model, which was incorporated into the finite element code for rolling. First, the model was validated with experiments realized on the laboratory cold rolling mill. Calculated loads were compared with experimental data and good agreement was obtained. Beyond this, metallographic analysis was performed and deformation of the ferritic–pearlitic microstructure during rolling was investigated. Finally, the generated results were combined in the form of the multi-scale numerical model based on the digital material representation approach capable of investigating local microstructural inhomogeneities.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.