Experimental investigation on the influence of phase change materials on properties and pore structure of steam-cured mortar
Source abstract
Abstract
Steam-cured concrete with high early strength has been widely applied in high-speed railway. However, heat damage caused by the steam curing process brings adverse effects on the pore structure and durability of steam-cured concrete. It has been found that phase change materials (PCMs) help improve the durability of cement-based materials. Therefore, the influences of two PCMs on the strength, water absorption, and microstructure of steam-cured mortar are discussed in this study. Two PCMs used include pure paraffin and a composite phase change material composed of porous diatomite and paraffin (D/P). The results show that the addition of appropriate PCMs does not significantly reduce the strength of steam-cured mortar. The addition of a small amount of PCMs shows little influence on the pore structure of steam-cured mortar but effective in improving the water-penetration resistance. This is partially attributed to the improvement of hydrophobic characteristics in the pores, resulting from the adhesion of hydrophobic PCMs on the pores during the steam curing. Compared with specimens containing pure paraffin, the pore structure of specimens containing D/P is refined, resulting in higher compressive strength. This may be due to the uniform distribution of small particles D/P in the specimen and the pozzolanic reaction of diatomite in D/P. The use of suitable phase change materials will be helpful to improve the durability of steam-cured concrete.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Choi HK, Choi YC, Choi CS. Development and testing of precast concrete beam-to-column connections. Eng Struct. 2013;56:1820–35. https://doi.org/10.1016/j.engstruct.2013.07.021.10.1016/j.engstruct.2013.07.021 ↗
2. Maya LF, Zanuy C, Albajar L, Lopez C, Portabella J. Experimental assessment of connections for precast concrete frames using ultra high performance fiber reinforced concrete. Constr Build Mater. 2013;48:173–86. https://doi.org/10.1016/j.conbuildmat.2013.07.002.10.1016/j.conbuildmat.2013.07.002 ↗
3. Wang Q, Li MY, Zhang B. Influence of pre-curing time on the hydration of binder and the properties of concrete under steam curing condition. J Therm Anal Calorim. 2014;118:1505–12. https://doi.org/10.1007/s10973-014-4053-3.10.1007/s10973-014-4053-3 ↗
4. Kjellsen KO, Detwiler RJ. Reaction kinetics of Portland cement mortars hydrated at different temperatures. Cem Concr Res. 1992;22:112–20. https://doi.org/10.1016/0008-8846(92)90141-H.10.1016/0008-8846(92)90141-H ↗
5. Kjellsen KO. Heat curing and post-heat curing regimes of high-performance concrete: influence on microstructure and C-S-H composition. Cem Concr Res. 1996;26:295–307. https://doi.org/10.1016/0008-8846(95)00202-2.10.1016/0008-8846(95)00202-2 ↗
6. Lothenbach B, Winnefeld F, Alder C, Wieland E, Lunk P. Effect of temperature on the pore solution, microstructure and hydration products of Portland cement pastes. Cem Concr Res. 2007;37:483–91. https://doi.org/10.1016/j.cemconres.2006.11.016.10.1016/j.cemconres.2006.11.016 ↗
7. Escalante-Garcia JI, Sharp JH. The microstructure and mechanical properties of blended cements hydrated at various temperatures. Cem Concr Res. 2001;31:695–702. https://doi.org/10.1016/S0008-8846(01)00471-9.10.1016/S0008-8846(01)00471-9 ↗
8. Yang QB, Yang QR, Zhu PR. Scaling and corrosion resistance of steam-cured concrete. Cem Concr Res. 2003;33:1057–61. https://doi.org/10.1016/S0008-8846(03)00010-3.10.1016/S0008-8846(03)00010-3 ↗
9. Elkhadiri I, Puertas F. The effect of curing temperature on sulphate-resistant cement hydration and strength. Constr Build Mater. 2008;22:1331–41. https://doi.org/10.1016/j.conbuildmat.2007.04.014.10.1016/j.conbuildmat.2007.04.014 ↗
10. Ma KL, Long GC, Xie YJ. A real case of steam-cured concrete track slab premature deterioration due to ASR and DEF. Case Stud Construct Mater. 2017;6:63–71. https://doi.org/10.1016/j.cscm.2016.12.001.10.1016/j.cscm.2016.12.001 ↗
11. Ramezanianpour AM, Esmaeili KH, Ghahari SA, Ramezanianpour AA. Influence of initial steam curing and different types of mineral additives on mechanical and durability properties of self-compacting concrete. Constr Build Mater. 2014;73:187–94. https://doi.org/10.1016/j.conbuildmat.2014.09.072.10.1016/j.conbuildmat.2014.09.072 ↗
12. Nie S, Hu SG, Wang FZ, Yuan P, Zhu YH, Ye JN, Liu YP. Internal curing – A suitable method for improving the performance of heat-cured concrete. Constr Build Mater. 2016;122:294–301. https://doi.org/10.1016/j.conbuildmat.2016.05.159.10.1016/j.conbuildmat.2016.05.159 ↗
13. Ho DWS, Chua CW, Tam CT. Steam-cured concrete incorporating mineral admixtures. Cem Concr Res. 2003;33:595–601. https://doi.org/10.1016/S0008-8846(02)01028-1.10.1016/S0008-8846(02)01028-1 ↗
14. Liu BJ, Xie YJ, Li J. Influence of steam curing on the compressive strength of concrete containing supplementary cementing materials. Cem Concr Res. 2005;35:994–8. https://doi.org/10.1016/j.cemconres.2004.05.044.10.1016/j.cemconres.2004.05.044 ↗
15. Ishida T, Luan Y, Sagawa T, Nawa TH. Modeling of early age behavior of blast furnace slag concrete based on micro-physical properties. Cem Concr Res. 2011;41:1357–67. https://doi.org/10.1016/j.cemconres.2011.06.005.10.1016/j.cemconres.2011.06.005 ↗
16. Gruyaert E, Robeyst N, Belie ND. Study of the hydration of Portland cement blended with blast-furnace slag by calorimetry and thermogravimetry. J Therm Anal Calorim. 2010;102:941–51. https://doi.org/10.1007/s10973-010-0841-6.10.1007/s10973-010-0841-6 ↗
17. Zhang TS, Yu QJ, Wei JX, Zhang PP. Effects of size fraction on composition and fundamental properties of Portland cement. Constr Build Mater. 2011;25:3038–43. https://doi.org/10.1016/j.conbuildmat.2011.01.005.10.1016/j.conbuildmat.2011.01.005 ↗
18. Liu SH, Li LH. Influence of fineness on the cementitious properties of steel slag. J Therm Anal Calorim. 2014;117:629–34. https://doi.org/10.1007/s10973-014-3789-0.10.1007/s10973-014-3789-0 ↗
19. Fernandes F, Manari S, Aguayo M, Santos K, Oey T, Wei ZH, Falzone G, Neithalath N, Sant G. On the feasibility of using phase change materials (PCMs) to mitigate thermal cracking in cementitious materials. Cement Concr Compos. 2014;51:14–26. https://doi.org/10.1016/j.cemconcomp.2014.03.003.10.1016/j.cemconcomp.2014.03.003 ↗
20. Cunha S, Lima M, Aguiar JB. Influence of adding phase change materials on the physical and mechanical properties of cement mortars. Constr Build Mater. 2016;127:1–10. https://doi.org/10.1016/j.conbuildmat.2016.09.119.10.1016/j.conbuildmat.2016.09.119 ↗
21. Yeon JH, Kim KK. Potential applications of phase change materials to mitigate freeze-thaw deteriorations in concrete pavement. Constr Build Mater. 2018;177:202–9. https://doi.org/10.1016/j.conbuildmat.2018.05.113.10.1016/j.conbuildmat.2018.05.113 ↗
22. Bi LP, Long GC, Ma C, Xie YJ. Mechanical properties and water absorption of steam-cured mortar containing phase change composites. Constr Build Mater. 2020;248:118707. https://doi.org/10.1016/j.conbuildmat.2020.118707.10.1016/j.conbuildmat.2020.118707 ↗
23. Aguayo M, Das S, Maroli A, Kabay N, Mertens JCE, Rajan SD, Sant G, Chawla N, Neithalath N. The influence of microencapsulated phase change material (PCM) characteristics on the microstructure and strength of cementitious composites: experiments and finite element simulations. Cement Concr Compos. 2016;73:29–41. https://doi.org/10.1016/j.cemconcomp.2016.06.018.10.1016/j.cemconcomp.2016.06.018 ↗
24. Mohaine S, Feliu J, Grondin F, Karkri M, Loukili A. Multiscale modelling for the thermal creep analysis of PCM concrete. Energy Build. 2016;131:99–112. https://doi.org/10.1016/j.enbuild.2016.09.013.10.1016/j.enbuild.2016.09.013 ↗
25. Gesoğlu M, Güneyisi E, Ali B, Mermerdas K. Strength and transport properties of steam cured and water cured lightweight aggregate concretes. Constr Build Mater. 2013;49:417–24. https://doi.org/10.1016/j.conbuildmat.2013.08.042.10.1016/j.conbuildmat.2013.08.042 ↗
26. Mindess S, Young JF, Darwin D. Concrete. 2nd ed. Englewood Cliffs: Prentice Hall; 2002.
27. Pipilikaki P, Beazi-Katsioti M. The assessment of porosity and pore size distribution of limestone Portland cement pastes. Constr Build Mater. 2009;23:966–1970. https://doi.org/10.1016/j.conbuildmat.2008.08.028.10.1016/j.conbuildmat.2008.08.028 ↗
28. Mehta PK, Monteiro PJM. Concrete: microstructure, properties, and materials. 3rd ed. New York: McGraw-Hill; 2006.