journal article·2026-05-12

Alkali-activated phosphogypsum-slag binders for non-fired brick: performance and microstructural insights

Yan Ying, Sheng-dong Liu, Chao-qiang Wang

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Building materials and conservation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Li B, Shu J, Yang L, Tao C, Chen M, Liu Z, Liu R. An innovative method for simultaneous stabilization / solidification of PO 4 3– and F – from phosphogypsum using phosphorus ore flotation tailings. J Clean Prod. 2019;235308–316. https://doi.org/10.1016/j.jclepro.2019.06.340.10.1016/j.jclepro.2019.06.340 ↗
2. Zhao L, Jiang G, Li G, Wu S, Cheng H, Li H, Sun W, Liu Y, Zhu L. Optimal selection of retarder for hemihydrate phosphogypsum-based filling cementitious materials: Balanced retardation and strength growth. J Cent South Univ. 2026. https://doi.org/10.1007/s11771-026-6279-1.10.1007/s11771-026-6279-1 ↗
3. Rashad AM. Phosphogypsum as a construction material. J Clean Prod. 2017;166732–743. https://doi.org/10.1016/j.jclepro.2017.08.049.10.1016/j.jclepro.2017.08.049 ↗
4. Murali G, Azab M. Recent research in utilization of phosphogypsum as building materials. Rev J Mater Res Technol-Jmrt. 2023;25960–987. https://doi.org/10.1016/j.jmrt.2023.05.272.10.1016/j.jmrt.2023.05.272 ↗
5. Wu Y, Xu F, Wu X, Jiao Y, Sun T, Li Z, Yang F, Li H, Li B, Xu J, Chen S, Liu Y, Zhu J. Retardation mechanism of phosphogypsum in phosphogypsum - based excess-sulfate cement. Constr Build Mater. 2024;428. https://doi.org/10.1016/j.conbuildmat.2024.136293.10.1016/j.conbuildmat.2024.136293 ↗
6. Li B, Li L, Chen X, Ma Y, Zhou M. Modification of phosphogypsum using circulating fluidized bed fly ash and carbide slag for use as cement retarder. Constr Build Mater. 2022;338. https://doi.org/10.1016/j.conbuildmat.2022.127630.10.1016/j.conbuildmat.2022.127630 ↗
7. Zhang J, Cui K, Yang Y, Chang J. Investigation on the preparation of low carbon cement materials from industrial solid waste phosphogypsum: Clinker preparation, cement properties, and hydration mechanism. J Clean Prod. 2024;452142203. https://doi.org/10.1016/j.jclepro.2024.142203.10.1016/j.jclepro.2024.142203 ↗
8. Qu F, Zhang Y, Li M, Dong W, Li W. Tsang D.C.W. Resource recycling of industrial waste phosphogypsum in cementitious materials: Pretreatment, properties, and applications. J Environ Manage. 2025;376124291. https://doi.org/10.1016/j.jenvman.2025.124291.10.1016/j.jenvman.2025.124291 ↗
9. Yang L, Zhang Y, Yan Y. Utilization of original phosphogypsum as raw material for the preparation of self-leveling mortar. J Clean Prod. 2016;127204–213. https://doi.org/10.1016/j.jclepro.2016.04.054.10.1016/j.jclepro.2016.04.054 ↗
10. Wang C, Ying Y, Wang T, Huang D, Wei S. Highly efficient modified phosphogypsum building gypsum powder and environmentally friendly utilisation in self-levelling mortar. Arch Civ Mech Eng. 2024;242. https://doi.org/10.1007/s43452-024-00933-6.10.1007/s43452-024-00933-6 ↗
11. Muthukumar P, Shewale M, Asalkar S, Shinde N, Korke P, Anitha M, Gobinath R, Anuradha R. Experimental study on light weight panel using phosphogypsum. Mater Today-Proceedings. 2022;491852–1856. https://doi.org/10.1016/j.matpr.2021.08.056.10.1016/j.matpr.2021.08.056 ↗
12. Li Z, Yao S, Wang G, Fan C, Wu X. Innovative development of high-performance aerogel-phosphogypsum thermal insulation mortars: Optimization of composition and enhanced mechanical properties. J Build Eng. 2024;98. https://doi.org/10.1016/j.jobe.2024.111277.10.1016/j.jobe.2024.111277 ↗
13. Amrani M, Taha Y, Kchikach A, Benzaazoua M, Hakkou R. Phosphogypsum recycling: New horizons for a more sustainable road material application. J Build Eng. 2020;30. https://doi.org/10.1016/j.jobe.2020.101267.10.1016/j.jobe.2020.101267 ↗
14. Diouri C, Echehbani I, Lahlou K, Omari KE, Alaoui A. Valorization of Moroccan phosphogypsum in road engineering: Parametric study. Materials Today-Proceedings. 2022;581054-1058. https://doi.org/10.1016/j.matpr.2022.01.08410.1016/j.matpr.2022.01.084 ↗
15. Vallecillo DZ, Weiksnar KD, Laux SJ, Townsend TG. Blending as a strategy for using phosphogypsum in granular road base: physical performance and implications. Resour Conserv Recycl. 2024;209. https://doi.org/10.1016/j.resconrec.2024.107791.10.1016/j.resconrec.2024.107791 ↗
16. Kandil AT, Cheira MF, Gado HS, Soliman MH, Akl HM. Ammonium sulfate preparation from phosphogypsum waste. J Radiat Res Appl Sci. 2017;101:24–33. https://doi.org/10.1016/j.jrras.2016.11.001.10.1016/j.jrras.2016.11.001 ↗
17. Yang J, Liu S, Wang Y, Huang Y, Yuxin S, Dai Q, Liu H. Ma L. Phosphogypsum Resource Utilization Based on Thermodynamic Analysis. Chem Eng Technol. 2022;455:776–90. https://doi.org/10.1002/ceat.202100590.10.1002/ceat.202100590 ↗
18. Wang Z, Ma X, Pan H, Yang X, Zhang X, Lyu Y, Liao W, Shui W, Wu J, Xu M, Zhang Y, Zhang S, Xiao Y, Luo H. Investigating effects of phosphogypsum disposal practices on the environmental performance of phosphate fertilizer production using emergy analysis and carbon emission amounting: A case study from China. J Clean Prod. 2023;409167248. https://doi.org/10.1016/j.jclepro.2023.137248.10.1016/j.jclepro.2023.137248 ↗
19. Bossolani JW, Crusciol CAC, Leite MFA, Merloti LF, Moretti LG, Pascoaloto IM, Kuramae EE. Modulation of the soil microbiome by long-term Ca-based soil amendments boosts soil organic carbon and physicochemical quality in a tropical no-till crop rotation system. Soil Biol Biochem. 2021;156108188. https://doi.org/10.1016/j.soilbio.2021.108188.10.1016/j.soilbio.2021.108188 ↗
20. Qi J, Zhu H, Zhou P, Wang X, Wang Z, Yang S, Yang D, Li B. Application of phosphogypsum in soilization: a review. Int J Environ Sci Technol. 2023;209:10449–64. https://doi.org/10.1007/s13762-023-04783-2.10.1007/s13762-023-04783-2 ↗
21. Laurino JP, Mustacato J, Huba ZJ. Rare Earth Element Recovery from Acidic Extracts of Florida Phosphate Mining Materials Using Chelating Polymer 1-Octadecene, Polymer with 2,5-Furandione, Sodium Salt. Minerals. 2019;98. https://doi.org/10.3390/min9080477.10.3390/min9080477 ↗
22. Virolainen S, Repo E, Sainio T. Recovering rare earth elements from phosphogypsum using a resin - in - leach process: Selection of resin, leaching agent, and eluent. Hydrometallurgy. 2019;189. https://doi.org/10.1016/j.hydromet.2019.105125.10.1016/j.hydromet.2019.105125 ↗
23. Cheng G, Zhang Z, Mao R, Wu H, Liang X, Zhou J. Experimental investigation on thermal and mechanical performance of alkali-activated coal gangue foam materials doped with phosphogypsum. Arch Civ Mech Eng. 2025;253. https://doi.org/10.1007/s43452-025-01213-7.10.1007/s43452-025-01213-7 ↗
24. Xiao Y, Tan Y, Zhou C, Sun W, Sun D, Yuan H, Xing D. Utilisation of silica-rich waste in eco phosphogypsum-based cementitious materials: Strength, microstructure, thermodynamics and CO2 sequestration. Constr Build Mater. 2024;411. https://doi.org/10.1016/j.conbuildmat.2023.134469.10.1016/j.conbuildmat.2023.134469 ↗
25. Xu J, Chen P, Zhang C, Yang Y. Influence of phosphogypsum on mechanical properties and microstructure of iron tailings cementitious material. Arch Civ Mech Eng. 2023;241. https://doi.org/10.1007/s43452-023-00831-3.10.1007/s43452-023-00831-3 ↗
26. Qi W, Duan G, Han Y, Zhao Q, Huang Y, Zhu W, Pang H, Zhang J. Comparison of mechanical properties and microstructure of GGBS-based cementitious materials activated by different combined alkaline wastes. Constr Build Mater. 2024;422. https://doi.org/10.1016/j.conbuildmat.2024.135784.10.1016/j.conbuildmat.2024.135784 ↗
27. Liu S, Fang P, Ren J, Li S. Application of lime neutralised phosphogypsum in supersulfated cement. J Clean Prod. 2020;272. https://doi.org/10.1016/j.jclepro.2020.122660.10.1016/j.jclepro.2020.122660 ↗
28. Dener M, Altunhan U, Benli A. A green binder for cold weather applications: enhancing mechanical performance of alkali-activated slag through modulus, alkali dosage, and Portland cement substitution. Arch Civ Mech Eng. 2024;243:176. https://doi.org/10.1007/s43452-024-00991-w.10.1007/s43452-024-00991-w ↗
29. Mohammed ZM, Abdulhameed AA, Kazim HK. Effect of Alkali - Activated Natural Pozzolan on Mechanical Properties of Geopolymer Concrete. Civ Environ Eng. 2022;181:312–20. https://doi.org/10.2478/cee-2022-0029.10.2478/cee-2022-0029 ↗
30. Abdel-Gawwad HA, Saleh AA, Meddah MS, Al-kroom H, Stephan D, Elrahman MA. Mesoporous expansive ettringite binder from chemically-treated phosphogypsum waste: Physico-mechanical properties and phase composition. Constr Build Mater. 2024;422. https://doi.org/10.1016/j.conbuildmat.2024.135698.10.1016/j.conbuildmat.2024.135698 ↗
31. Statkauskas M, Vaiciukyniene D, Grinys A, Borg RP. Mechanical properties and microstructure of ternary alkali activated system: Red brick waste, metakaolin and phosphogypsum. Constr Build Mater. 2023;387. https://doi.org/10.1016/j.conbuildmat.2023.131648.10.1016/j.conbuildmat.2023.131648 ↗
32. Vaiciukyniene D, Nizeviciene D, Kiele A, Janavicius E, Pupeikis D. Effect of phosphogypsum on the stability upon firing treatment of alkali-activated slag. Constr Build Mater. 2018;184485–491. https://doi.org/10.1016/j.conbuildmat.2018.06.213.10.1016/j.conbuildmat.2018.06.213 ↗
33. Ma F, Chen L, Lin Z, Liu Z, Zhang W, Guo R. Microstructure and Key Properties of Phosphogypsum-Red Mud-Slag Composite Cementitious Materials. Materials. 2022;1517. https://doi.org/10.3390/ma15176096.10.3390/ma15176096 ↗
34. Wang C, Chen S, Huang D, Huang Q, Li X, Shui Z. Safe environmentally friendly reuse of red mud modified phosphogypsum composite cementitious material. Constr Build Mater. 2023;368. https://doi.org/10.1016/j.conbuildmat.2023.130348.10.1016/j.conbuildmat.2023.130348 ↗
35. Meskini S, Samdi A, Ejjaouani H, Remmal T. Valorization of phosphogypsum as a road material: Stabilizing effect of fly ash and lime additives on strength and durability. J Clean Prod. 2021;323. https://doi.org/10.1016/j.jclepro.2021.129161.10.1016/j.jclepro.2021.129161 ↗
36. Chen P, Ma B, Tan H. Effect of amorphous aluminum hydroxide on the phosphogypsum-based cementitious materials in prefabricated building field. J Build Eng. 2023;77. https://doi.org/10.1016/j.jobe.2023.107437.10.1016/j.jobe.2023.107437 ↗
37. Deng F, Ye J, Liu Y, Zhang T, Liao Y, Tang S. Influence of cement on properties of calcined phosphogypsum based composite cementitious materials. J Mater Res Technol-Jmrt. 2023;243145–3156. https://doi.org/10.1016/j.jmrt.2023.03.194.10.1016/j.jmrt.2023.03.194 ↗
38. Fu R, Lu Y, Wang L, An H, Chen S, Kong D. The effects of admixtures on the durability properties of phosphogypsum-based cementitious materials. Constr Build Mater. 2024;411. https://doi.org/10.1016/j.conbuildmat.2023.134379.10.1016/j.conbuildmat.2023.134379 ↗
39. Li H, Xu F, Li B, Sun T, Huang X, Zhu J, Peng C, Lin J, Chen Z. Investigation on mechanical properties of excess-sulfate phosphogypsum slag cement: From experiments to molecular dynamics simulation. Constr Build Mater. 2022;315. https://doi.org/10.1016/j.conbuildmat.2021.125685.10.1016/j.conbuildmat.2021.125685 ↗
40. Shi Y, Li Y, Wang H. Eco-friendly solid waste-based cementitious material containing a large amount of phosphogypsum: Performance optimization, micro-mechanisms, and environmental properties. J Clean Prod. 2024;471. https://doi.org/10.1016/j.jclepro.2024.143335.10.1016/j.jclepro.2024.143335 ↗
41. Wang Y, Chen B, Liu N, Jiang Z. Utilization of waste phosphogypsum in high-strength geopolymer concrete: Performance optimization and mechanistic exploration. J Build Eng. 2024;98. https://doi.org/10.1016/j.jobe.2024.111253.10.1016/j.jobe.2024.111253 ↗
42. Gijbels K, Pontikes Y, Samyn P, Schreurs S, Schroeyers W. Effect of NaOH content on hydration, mineralogy, porosity and strength in alkali / sulfate-activated binders from ground granulated blast furnace slag and phosphogypsum. Cem Concr Res. 2020;132. https://doi.org/10.1016/j.cemconres.2020.106054.10.1016/j.cemconres.2020.106054 ↗
43. Zhang L, Jia Y, Shu H, Zhang L, Lu X, Bai F, Zhao Q, De Tian. The effect of basicity of modified ground granulated blast furnace slag on its denitration performance. J Clean Prod. 2021;305. https://doi.org/10.1016/j.jclepro.2021.126800.10.1016/j.jclepro.2021.126800 ↗
44. Wang C, Zang X, Zhu J, Hu C, Liang M, Jiang Y, Zhao H, Ren J. Effect of mixing water on early-stage properties and hydration mechanisms of alkali-activated materials containing slag and desulfurization gypsum. Arch Civ Mech Eng. 2025;255–6. https://doi.org/10.1007/s43452-025-01343-y.10.1007/s43452-025-01343-y ↗
45. Dener M, Karatas M, Shi J, Mohabbi M. Mechanical properties and microstructure of hybrid alkali-activated cement component. Arch Civ Mech Eng. 2024;251. https://doi.org/10.1007/s43452-024-01054-w.10.1007/s43452-024-01054-w ↗
46. Yoon S, Park H, Yum WS, Suh J, Oh JE. Influence of Calcium Sulfate Type on Evolution of Reaction Products and Strength in NaOH - and CaO-Activated Ground Granulated Blast-Furnace Slag. Appl Sci -Basel. 2018;812. https://doi.org/10.3390/app8122500.10.3390/app8122500 ↗
47. Zheng Y, Zhong H, Sun K, Shen B, Cui K, Zhao Y, Xiong G, Qin Q. Effect of composite activator on hydration kinetics and micromechanical properties of alkali-activated slag. Cem Concr Compos. 2025;160. https://doi.org/10.1016/j.cemconcomp.2025.106047.10.1016/j.cemconcomp.2025.106047 ↗
48. Wang Y, Huo H, Chen B, Cui Q. Development and optimization of phosphogypsum-based geopolymer cement. Constr Build Mater. 2023;369. https://doi.org/10.1016/j.conbuildmat.2023.130577.10.1016/j.conbuildmat.2023.130577 ↗
49. Wang D, Na Q, Liu Y, Feng Y, Zhang Q, Chen Q. Hydration process and fluoride solidification mechanism of multi-source solid waste-based phosphogypsum cemented paste backfill under CaO modification. Cem Concr Res. 2024;154(105804). https://doi.org/10.1016/j.cemconcomp.2024.105804.10.1016/j.cemconcomp.2024.105804 ↗
50. Dai X, Aydin S, Yardimci MY, De Schutter G. Fresh and hardened state properties, reaction kinetics and microstructure of sodium sulfate / sodium hydroxide - Activated slag mixtures. Constr Build Mater. 2023;401. https://doi.org/10.1016/j.conbuildmat.2023.132943.10.1016/j.conbuildmat.2023.132943 ↗
51. Boulebnane MA, Belkadi AA, Boudeghdegh K, Chiker T, Berkouche A, Benaddache L, Cousture A, Aggoun S. Optimizing mix design methods for using slag, ceramic, and glass waste powders in eco-friendly geopolymer mortars. Arch Civ Mech Eng. 2024;251. https://doi.org/10.1007/s43452-024-01077-3.10.1007/s43452-024-01077-3 ↗
52. Ismail I, Bernal SA, Provis JL, Nicolas RS, Hamdan S, van Deventer. J.S.J. Modification of phase evolution in alkali-activated blast furnace slag by the incorporation of fly ash. Cem Concr Compos. 2014;45125–135. https://doi.org/10.1016/j.cemconcomp.2013.09.006.10.1016/j.cemconcomp.2013.09.006 ↗
53. Yu L, Wang C, Liu C. Phosphogypsum composite cement-based permeable bricks: optimization of mix design, performance evaluation, and environmental impact. Arch Civ Mech Eng. 2025;254. https://doi.org/10.1007/s43452-025-01251-1.10.1007/s43452-025-01251-1 ↗
54. Liu C, Gao J, Chen F, Zhao Y, Chen X, He Z. Coupled effect of relative humidity and temperature on the degradation of cement mortars partially exposed to sulfate attack. Constr Build Mater. 2019;21693–100. https://doi.org/10.1016/j.conbuildmat.2019.05.001.10.1016/j.conbuildmat.2019.05.001 ↗
55. Wu Q, Xue Q, Yu Z. Research status of super sulfate cement. J Clean Prod. 2021;294. https://doi.org/10.1016/j.jclepro.2021.126228.10.1016/j.jclepro.2021.126228 ↗
56. Fu Q, Bu M, Zhang Z, Xu W, Yuan Q, Niu D. Hydration Characteristics and Microstructure of Alkali-Activated Slag Concrete: A Review. Engineering. 2023;20162–179. https://doi.org/10.1016/j.eng.2021.07.026.10.1016/j.eng.2021.07.026 ↗
57. Hamdan A, Hajimohammadi A, Rawal A, Kim T. The intrinsic role of network modifiers (Ca versus Mg) in the reaction kinetics and microstructure of sodium silicate-activated CaO-MgO-Al2O3-SiO2 glasses. Cem Concr Res. 2023;164. https://doi.org/10.1016/j.cemconres.2022.107058.10.1016/j.cemconres.2022.107058 ↗
58. Dener M, Altunhan U, Benli A. A green binder for cold weather applications: enhancing mechanical performance of alkali-activated slag through modulus, alkali dosage, and Portland cement substitution. Arch Civ Mech Eng. 2024;243. https://doi.org/10.1007/s43452-024-00991-w.10.1007/s43452-024-00991-w ↗
59. Tang L, He Z, Chen K, Wang X, Xiao Y, Yu Z, Xiao H. Study of microscopic properties and heavy metal solidification mechanism of electrolytic manganese residue-based cementitious materials. Environ Sci Pollut Res. 2023;3048:105056–71. https://doi.org/10.1007/s11356-023-29772-3.10.1007/s11356-023-29772-3 ↗
60. Halim CE, Amal R, Beydoun D, Scott JA, Low G. Implications of the structure of cementitious wastes containing Pb(II), Cd(II), As(V), and Cr(VI) on the leaching of metals. Cem Concr Res. 2004;347:1093–102. https://doi.org/10.1016/j.cemconres.2003.11.025.10.1016/j.cemconres.2003.11.025 ↗
61. Wang D, Wang Q. Clarifying and quantifying the immobilization capacity of cement pastes on heavy metals. Cem Concr Res. 2022;161. https://doi.org/10.1016/j.cemconres.2022.106945.10.1016/j.cemconres.2022.106945 ↗