journal article·2026-02-01

Effect of Mo content in the Ti₁₋ₓMoₓC reinforcing phase on the microstructural, mechanical, tribological and corrosion behavior of titanium matrix composites sintered by the FAST/SPS process

Rafał Rubach, Paweł Figiel, Anna Biedunkiewicz, Mirosława Pawlyta, Dariusz Garbiec

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Ma F, Shi Z, Liu P, Li W, Liu X, Chen X, et al. Strengthening effect of in situ TiC particles in Ti matrix composite at temperature range for hot working. Mater Charact. 2016;120:304–10. https://doi.org/10.1016/j.matchar.2016.09.010.10.1016/j.matchar.2016.09.010 ↗
2. Ma F, Zhou J, Liu P, Li W, Liu X, Pan D, et al. Strengthening effects of TiC particles and microstructure refinement in in situ TiC-reinforced Ti matrix composites. Mater Charact. 2017;127:27–34. https://doi.org/10.1016/j.matchar.2017.02.004.10.1016/j.matchar.2017.02.004 ↗
3. Yu HL, Zhang W, Wang HM, Ji XC, Song ZY, Li XY, et al. In-situ synthesis of TiC/Ti composite coating by high frequency induction cladding. J Alloy Compd. 2017;701:244–55. https://doi.org/10.1016/j.jallcom.2017.01.084.10.1016/j.jallcom.2017.01.084 ↗
4. Xu S, Lu T, Qiu J, Fu A, Liu Y. Microstructure and mechanical properties of Ti-Ta based composites enhanced by in-situ formation of TiC particles. Mater Charact. 2021;178:111241. https://doi.org/10.1016/j.matchar.2021.111241.10.1016/j.matchar.2021.111241 ↗
5. Kim YJ, Chung H, Kang SJL. In situ formation of titanium carbide in titanium powder compacts by gas–solid reaction. Compos A Appl Sci Manuf. 2001;32(5):731–8. https://doi.org/10.1016/S1359-835X(99)00092-5.10.1016/S1359-835X(99)00092-5 ↗
6. Roger J, Gardiola B, Andrieux J, Viala J-C, Dezellus O. Synthesis of Ti matrix composites reinforced with TiC particles: thermodynamic equilibrium and change in microstructure. J Mater Sci. 2017;52(7):4129–41. https://doi.org/10.1007/s10853-016-0677-y.10.1007/s10853-016-0677-y ↗
7. Wanjara P, Drew RAL, Root J, Yue S. Evidence for stable stoichiometric Ti2C at the interface in TiC particulate reinforced Ti alloy composites. Acta Mater. 2000;48(7):1443–50. https://doi.org/10.1016/S1359-6454(99)00453-X.10.1016/S1359-6454(99)00453-X ↗
8. Quinn CJ, Kohlstedt DL. Solid-state reaction between titanium carbide and titanium metal. J Am Ceram Soc. 1984;67(5):305–10. https://doi.org/10.1111/j.1151-2916.1984.tb19527.x.10.1111/j.1151-2916.1984.tb19527.x ↗
9. Gusev A. Mechanical properties of nonstoichiometric cubic titanium carbide TiC y . Phys Chem Chem Phys. 2021. https://doi.org/10.1039/D1CP02697F.10.1039/D1CP02697F ↗
10. Rajabi A, Ghazali MJ, Daud AR. Chemical composition, microstructure and sintering temperature modifications on mechanical properties of TiC-based cermet—a review. Mater Des. 2015;67:95–106. https://doi.org/10.1016/j.matdes.2014.10.081.10.1016/j.matdes.2014.10.081 ↗
11. Cai C, He S, Li L, Teng Q, Song B, Yan C, et al. In-situ TiB/Ti-6Al-4V composites with a tailored architecture produced by hot isostatic pressing: microstructure evolution, enhanced tensile properties and strengthening mechanisms. Compos B Eng. 2019;164:546–58. https://doi.org/10.1016/j.compositesb.2019.01.080.10.1016/j.compositesb.2019.01.080 ↗
12. Conforto E, Mari D, Cutard T. The role of molybdenum in the hard-phase grains of (Ti, Mo)(C, N)–Co cermets. Philos Mag. 2004;84(17):1717–33. https://doi.org/10.1080/14786430310001659516.10.1080/14786430310001659516 ↗
13. Ahn S-Y, Kang S. Formation of core/rim structures in Ti (C, N)‐WC‐Ni cermets via a dissolution and precipitation process. J Am Ceram Soc. 2000;83:1489–94. https://doi.org/10.1111/j.1151-2916.2000.tb01415.x.10.1111/j.1151-2916.2000.tb01415.x ↗
14. Banerjee D, Williams JC. Perspectives on titanium science and technology. Acta Mater. 2013;61(3):844–79. https://doi.org/10.1016/j.actamat.2012.10.043.10.1016/j.actamat.2012.10.043 ↗
15. Selvam JDR, Dinaharan I, Rai RS. Matrix and reinforcement materials for metal matrix composites. In: Brabazon D, editor. Encyclopedia of materials: composites. Oxford: Elsevier; 2021. p. 615–39.10.1016/B978-0-12-803581-8.11890-9 ↗
16. Niinomi M. Mechanical properties of biomedical titanium alloys. Mater Sci Eng A. 1998;243(1):231–6. https://doi.org/10.1016/S0921-5093(97)00806-X.10.1016/S0921-5093(97)00806-X ↗
17. Pastor H. Titanium-carbonitride-based hard alloys for cutting tools. Mater Sci Eng A. 1988;105–106:401–9. https://doi.org/10.1016/0025-5416(88)90724-0.10.1016/0025-5416(88)90724-0 ↗
18. Liang M, Xiong J, Guo Z, Wan W, Dong G. The influence of TiN content on erosion–corrosion behavior of Ti(C,N)-based cermets. Int J Refract Met Hard Mater. 2013;41:210–5. https://doi.org/10.1016/j.ijrmhm.2013.03.015.10.1016/j.ijrmhm.2013.03.015 ↗
19. Zhang X, Liu N, Rong C. Effect of molybdenum content on the microstructure and mechanical properties of ultra-fine Ti(C, N) based cermets. Mater Charact. 2008;59(12):1690–6. https://doi.org/10.1016/j.matchar.2008.03.008.10.1016/j.matchar.2008.03.008 ↗
20. Huang S, Zhao Q, Zhao Y, Lin C, Wu C, Jia W, et al. Toughening effects of Mo and Nb addition on impact toughness and crack resistance of titanium alloys. J Mater Sci Technol. 2021;79:147–64. https://doi.org/10.1016/j.jmst.2020.11.045.10.1016/j.jmst.2020.11.045 ↗
21. Yang JK, Lee H-C. Microstructural evolution during the sintering of a Ti(C,N)Mo2CNi alloy. Mater Sci Eng A. 1996;209(1):213–7. https://doi.org/10.1016/0921-5093(95)10126-8.10.1016/0921-5093(95)10126-8 ↗
22. Li P, Ye J, Liu Y, Yang D, Yu H. Study on the formation of core–rim structure in Ti(CN)-based cermets. Int J Refract Met Hard Mater. 2012;35:27–31. https://doi.org/10.1016/j.ijrmhm.2012.03.012.10.1016/j.ijrmhm.2012.03.012 ↗
23. Han C, Kong M. Fabrication and properties of TiC-based cermet with intra/intergranular microstructure. Mater Des. 2009;30(4):1205–8. https://doi.org/10.1016/j.matdes.2008.06.019.10.1016/j.matdes.2008.06.019 ↗
24. Xu S, Zhou C, Liu Y, Liu B, Li K. Microstructure and mechanical properties of Ti-15Mo-xTiC composites fabricated by in-situ reactive sintering and hot swaging. J Alloys Compd. 2018;738:188–96. https://doi.org/10.1016/j.jallcom.2017.12.124.10.1016/j.jallcom.2017.12.124 ↗
25. Chen Q, Thouas GA. Metallic implant biomaterials. Mater Sci Eng R Rep. 2015;87:1–57. https://doi.org/10.1016/j.mser.2014.10.001.10.1016/j.mser.2014.10.001 ↗
26. Ho WF, Ju CP, Chern Lin JH. Structure and properties of cast binary Ti–Mo alloys. Biomaterials. 1999;20(22):2115–22. https://doi.org/10.1016/S0142-9612(99)00114-3.10.1016/S0142-9612(99)00114-3 ↗
27. Li M, Min X, Yao K, Ye F. Novel insight into the formation of α″-martensite and ω-phase with cluster structure in metastable Ti-Mo alloys. Acta Mater. 2019;164:322–33. https://doi.org/10.1016/j.actamat.2018.10.048.10.1016/j.actamat.2018.10.048 ↗
28. Moshokoa NA, Raganya ML, Machaka R, Makhatha ME, Obadele BA. The effect of molybdenum content on the microstructural evolution and tensile properties of as-cast Ti-Mo alloys. Mater Today Commun. 2021;27:102347. https://doi.org/10.1016/j.mtcomm.2021.102347.10.1016/j.mtcomm.2021.102347 ↗
29. Oliveira NTC, Guastaldi AC. Electrochemical stability and corrosion resistance of Ti–Mo alloys for biomedical applications. Acta Biomater. 2009;5(1):399–405. https://doi.org/10.1016/j.actbio.2008.07.010.10.1016/j.actbio.2008.07.010 ↗
30. Mantani Y, Tajima M. Phase transformation of quenched α″ martensite by aging in Ti–Nb alloys. Mater Sci Eng A. 2006;438:315–9. https://doi.org/10.1016/j.msea.2006.02.180.10.1016/j.msea.2006.02.180 ↗
31. Zhou Y-L, Luo D-M. Corrosion behavior of Ti–Mo alloys cold rolled and heat treated. J Alloys Compd. 2011;509(21):6267–72. https://doi.org/10.1016/j.jallcom.2011.03.045.10.1016/j.jallcom.2011.03.045 ↗
32. Fellah M, Hezil N, Abdul Samad M, Djellabi R, Montagne A, Mejias A, et al. Effect of molybdenum content on structural, mechanical, and tribological properties of hot isostatically pressed β-type titanium alloys for orthopedic applications. J Mater Eng Perform. 2019;28(10):5988–99. https://doi.org/10.1007/s11665-019-04348-w.10.1007/s11665-019-04348-w ↗
33. Xu W, Chen M, Lu X, Zhang D-w, Singh H-p, Jian-shu Y, et al. Effects of Mo content on corrosion and tribocorrosion behaviours of Ti-Mo orthopaedic alloys fabricated by powder metallurgy. Corros Sci. 2020;168:108557. https://doi.org/10.1016/j.corsci.2020.108557.10.1016/j.corsci.2020.108557 ↗
34. Park PY, Akiyama E, Habazaki H, Kawashima A, Asami K, Hashimoto K. The corrosion behavior of sputter-deposited Mo-Ti alloys in concentrated hydrochloric acid. Corros Sci. 1996;38(10):1649–67. https://doi.org/10.1016/S0010-938X(96)00041-8.10.1016/S0010-938X(96)00041-8 ↗
35. Zhao H, Xie L, Xin C, Li N, Zhao B, Li L. Effect of molybdenum content on corrosion resistance and corrosion behavior of Ti-Mo titanium alloy in hydrochloric acid. Mater Today Commun. 2023;34:105032. https://doi.org/10.1016/j.mtcomm.2022.105032.10.1016/j.mtcomm.2022.105032 ↗
36. Cardoso FF, Ferrandini PL, Lopes ESN, Cremasco A, Caram R. Ti–Mo alloys employed as biomaterials: effects of composition and aging heat treatment on microstructure and mechanical behavior. J Mech Behav Biomed Mater. 2014;32:31–8. https://doi.org/10.1016/j.jmbbm.2013.11.021.10.1016/j.jmbbm.2013.11.021 ↗
37. Wang Z, Cheng H, Lv Y, Zhang Z, Fan J, Zhang H, et al. Effect of TiC content on the microstructure and mechanical properties of Ti-30Mo-xTiC composites. Int J Refract Met Hard Mater. 2022;107:105879. https://doi.org/10.1016/j.ijrmhm.2022.105879.10.1016/j.ijrmhm.2022.105879 ↗
38. Shi Q, Yang S, Sun Y, Gu Y, Mercelis B, Zhong S, et al. In-situ formation of Ti-Mo biomaterials by selective laser melting of Ti/Mo and Ti/Mo2C powder mixtures: a comparative study on microstructure, mechanical and wear performance, and thermal mechanisms. J Mater Sci Technol. 2022;115:81–96. https://doi.org/10.1016/j.jmst.2021.09.017.10.1016/j.jmst.2021.09.017 ↗
39. Figiel P, Biedunkiewicz A, Jach K, Obrosov A, Garbiec D, Bik M, et al. Ti-Mo-xTiC composites manufactured by U-FAST reactive sintering. Int J Refract Met Hard Mater. 2022;108:105960. https://doi.org/10.1016/j.ijrmhm.2022.105960.10.1016/j.ijrmhm.2022.105960 ↗
40. Biedunkiewicz A, Figiel P, Garbiec D, Obrosov A, Pawlyta M, Biedunkiewicz W, et al. Influence of elemental carbon (EC) coating covering nc-(Ti,Mo)C particles on the microstructure and properties of titanium matrix composites prepared by reactive spark plasma sintering. Materials. 2021. https://doi.org/10.3390/ma14010231.10.3390/ma14010231 ↗
41. Figiel P, Biedunkiewicz A, Biedunkiewicz W, Grzesiak D, Pawlyta M. Corrosion characteristics of composites of (Mo, Ti)C Ti and TiC/Ti type manufactured with SLM technique. Arch Metall Mater. 2019;64(4):1617–25. https://doi.org/10.24425/amm.2019.130135.10.24425/amm.2019.130135 ↗
42. Krainik VV, Lisenko AA, Ivashchenko VI, Bekenev VL. Investigation of the electronic structure of cubic MoxTi1−x C y carbide alloys. Physica Status Solidi (B). 1996;194(2):575–83. https://doi.org/10.1002/pssb.2221940214.10.1002/pssb.2221940214 ↗
43. Pooja K, Tarannum N, Chaudhary P. Metal matrix composites: revolutionary materials for shaping the future. Discover Mater. 2025;5(1):35. https://doi.org/10.1007/s43939-025-00226-6.10.1007/s43939-025-00226-6 ↗
44. Oketola A, Jamiru T, Adegbola AT, Ogunbiyi O, Rominiyi AL, Smith S. Spark plasma sintering of ceramic-reinforced binary/ternary nickel and titanium metal matrix composites: mechanical properties, microstructure, and densification—a review. J Alloys Metall Syst. 2023;3:100031. https://doi.org/10.1016/j.jalmes.2023.100031.10.1016/j.jalmes.2023.100031 ↗
45. Ruzic J, Emura S, Ji X, Watanabe I. Mo segregation and distribution in Ti–Mo alloy investigated using nanoindentation. Mater Sci Eng A Mater Struct Prop Microstruct Process. 2018;718:48–55. https://doi.org/10.1016/j.msea.2018.01.098.10.1016/j.msea.2018.01.098 ↗
46. Liu Z-F, Zhang Z-H, Lu J-F, Korznikov AV, Korznikova E, Wang F-C. Effect of sintering temperature on microstructures and mechanical properties of spark plasma sintered nanocrystalline aluminum. Mater Des. 2014;64:625–30. https://doi.org/10.1016/j.matdes.2014.08.030.10.1016/j.matdes.2014.08.030 ↗
47. Saheb N, Iqbal Z, Khalil A, Hakeem AS, Al Aqeeli N, Laoui T, et al. Spark Plasma Sintering of metals and metal matrix nanocomposites: a review. J Nanomater. 2012;2012(1):983470. https://doi.org/10.1155/2012/983470.10.1155/2012/983470 ↗
48. Tünçay MM, Muñiz-Lerma JA, Bishop DP, Brochu M. Spark plasma sintering and spark plasma upsetting of an Al-Zn-Mg-Cu alloy. Mater Sci Eng A Mater Struct Prop Microstruct Process. 2017;704:154–63. https://doi.org/10.1016/j.msea.2017.08.015.10.1016/j.msea.2017.08.015 ↗
49. Zahler MP, Jennings D, Kindelmann M, Guillon O, Rheinheimer W. Reactive FAST/SPS sintering of strontium titanate as a tool for grain boundary engineering. J Eur Ceram Soc. 2023;43(15):6925–33. https://doi.org/10.1016/j.jeurceramsoc.2023.07.021.10.1016/j.jeurceramsoc.2023.07.021 ↗
50. Biedunkiewicz A, Krawczyk M, Gabriel-Półrolniczak U, Figiel P. Synthesis of ceramics by sol - Gel method in molybdenum, silicon and carbon containing systems thermogravimetric studies. Adv Powder Technol. 2014. https://doi.org/10.1016/j.apt.2014.08.004.10.1016/j.apt.2014.08.004 ↗
51. Biedunkiewicz A, Figiel P, Krawczyk M, Gabriel-Polrolniczak U. Simultaneous synthesis of molybdenum carbides and titanium carbides by sol–gel method. J Therm Anal Calorim. 2013;113(1):253–8. https://doi.org/10.1007/s10973-013-3176-2.10.1007/s10973-013-3176-2 ↗
52. Lancaster JK. The influence of substrate hardness on the formation and endurance of molybdenum disulphide films. Wear. 1967;10(2):103–17. https://doi.org/10.1016/0043-1648(67)90082-8.10.1016/0043-1648(67)90082-8 ↗