journal article·2025-12-05

The impact of ceramic and eggshell waste on the physical, mechanical, and freeze-thaw durability of sustainable geopolymer mortars: experimental investigation and optimization

Amirouche Berkouche, Ahmed Abderraouf Belkadi, Lysa Benaddache, Salima Aggoun

Publisher page

Abstract

To address the growing need for sustainable construction materials and effective waste management, this study investigates the feasibility of incorporating ceramic waste powder (CP) and powdered eggshell (PES) as partial replacements of ground blast furnace slag (0–50% by weight) in geopolymer mortars (GPs). The experimental program employed Central Composite Design to analyze binary and ternary GPs, examining fresh properties, mechanical performance, physical characteristics, and freeze-thaw resistance. Microstructural and phase evolution were assessed using XRD, FTIR, and SEM/EDX techniques. Findings revealed that CP improved workability due to its slower reaction kinetics and sub-angular morphology. Moderate PES additions (12.5%) enhanced early-age strength (47.94 MPa), while CP incorporation up to 25% improved long-term strength (> 80 MPa). Balanced CP-PES combinations enhanced matrix density, reducing water absorption and improving ultra pulse velocity. Microstructural analysis confirmed the synthesis of C-(N)-A-S-H gels, with balanced Ca/Si and Al/Si ratios. Ternary mix (12.5% CP, 12.5% PES) exhibited superior freeze-thaw resistance, with strength and weight losses recorded at 14.52% and 1.25%, respectively. The optimized mixture (20.4% CP, 14.12% PES) achieved a desirability value of 0.91, demonstrating excellent performance across all properties. This research demonstrates the feasibility of incorporating industrial and agricultural waste into high-performance, frost-resistant geopolymer mortars, offering a sustainable alternative for cold-climate construction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Recycled Aggregate Concrete Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Heath A, Paine K, McManus M. Minimising the global warming potential of clay based geopolymers. J Clean Prod. Sep. 2014;78:75–83. https://doi.org/10.1016/j.jclepro.2014.04.046.10.1016/j.jclepro.2014.04.046 ↗
2. Zeng Q, et al. Total recycling of low-quality urban-fringe construction and demolition waste towards the development of sustainable cement-free pervious concrete: the proof of concept. J Clean Prod. 2022;352:131464. https://doi.org/10.1016/j.jclepro.2022.131464.10.1016/j.jclepro.2022.131464 ↗
3. Nazir K, Canpolat O, Uysal M. Durability properties of steel, polyamide, and polyethylene fiber-reinforced geopolymer mortar made with recycled concrete aggregate and glass powder as fillers. J Building Eng. 2023;76:107313.10.1016/j.jobe.2023.107313 ↗
4. Aiken TA, Kwasny J, Sha W, Soutsos MN. Effect of slag content and activator dosage on the resistance of fly Ash geopolymer binders to sulfuric acid attack. Cem Concr Res. 2018;111:23–40.10.1016/j.cemconres.2018.06.011 ↗
5. Sarıdemir M, Çelikten S. Effects of Ms modulus, Na concentration and fly Ash content on properties of vapour-cured geopolymer mortars exposed to high temperatures. Constr Build Mater. 2023;363:129868. https://doi.org/10.1016/j.conbuildmat.2022.129868.10.1016/j.conbuildmat.2022.129868 ↗
6. Saif MS, El-Hariri MOR, Sarie-Eldin AI, Tayeh BA, Farag MF. Impact of Ca + content and curing condition on durability performance of metakaolin-based geopolymer mortars, Case Studies in Construction Materials, vol. 16, p. e00922, Jun. 2022, https://doi.org/10.1016/J.CSCM.2022.E0092210.1016/J.CSCM.2022.E00922 ↗
7. Hosseini S, Brake NA, Nikookar M, Günaydın-Şen Ö, Snyder HA. Mechanochemically activated bottom Ash-fly Ash geopolymer. Cem Concr Compos. 2021;118:103976. https://doi.org/10.1016/j.cemconcomp.2021.103976.10.1016/j.cemconcomp.2021.103976 ↗
8. Traven K, Češnovar M, Škapin SD, Ducman V. High temperature resistant fly-ash and metakaolin-based alkali-activated foams. Ceram Int. 2021;47(17):25105–20. https://doi.org/10.1016/j.ceramint.2021.05.241.10.1016/j.ceramint.2021.05.241 ↗
9. Berkouche A, et al. Enhancing sustainable construction practices: utilizing Heat-Treated recycled concrete fines for improving Slag-Based geopolymer materials. Arab J Sci Eng. 2024. https://doi.org/10.1007/s13369-024-09477-6.10.1007/s13369-024-09477-6 ↗
10. Alioui H, Chiker T, Saidat F, Lamara M, Aggoun S, Hamdi OM. Investigation of the effect of commercial limestone on alkali-activated blends based on Algerian slag-glass powder, European Journal of Environmental and Civil Engineering, vol. 26, no. 16, pp. 8049–8072, Dec. 2022, https://doi.org/10.1080/19648189.2021.201804710.1080/19648189.2021.2018047 ↗
11. Criado M, Aperador W, Sobrados I. Microstructural and mechanical properties of alkali activated Colombian Raw materials. Materials. 2016;9(3). https://doi.org/10.3390/ma9030158.10.3390/ma9030158 ↗
12. Chindaprasirt P, Rattanasak U. Calcium wastes as an additive for a low calcium fly Ash geopolymer. Sci Rep. 2023;13(1):16351. https://doi.org/10.1038/s41598-023-43586-w.10.1038/s41598-023-43586-w ↗
13. Wang J, Wu D, Chen K, Mao N, Zhang Z. Effect of Ca content on the synthesis and properties of FA-GGBFS geopolymer: Combining experiments and molecular dynamics simulation, Journal of Building Engineering, vol. 94, p. 109908, Oct. 2024, https://doi.org/10.1016/J.JOBE.2024.10990810.1016/J.JOBE.2024.109908 ↗
14. Borçato AG, Thiesen M, Medeiros-Junior RA. Incorporation of clay brick wastes and calcium hydroxide into geopolymers: compressive strength, microstructure, and efflorescence. J Building Eng. Jul. 2024;88:109259. https://doi.org/10.1016/J.JOBE.2024.109259.10.1016/J.JOBE.2024.109259 ↗
15. Jiao Z, Li X, Yu Q. Effect of curing conditions on freeze-thaw resistance of geopolymer mortars containing various calcium resources. Constr Build Mater. Dec. 2021;313:125507. https://doi.org/10.1016/J.CONBUILDMAT.2021.125507.10.1016/J.CONBUILDMAT.2021.125507 ↗
16. Li F, Chen D, Lu Y, Zhang H, Li S. Influence of mixed fibers on fly Ash based geopolymer resistance against freeze-thaw cycles. J Non Cryst Solids. 2022;584:121517.10.1016/j.jnoncrysol.2022.121517 ↗
17. Yuan Y, et al. Frost resistance of fiber-reinforced blended slag and class F fly ash-based geopolymer concrete under the coupling effect of freeze-thaw cycling and axial compressive loading. Constr Build Mater. 2020;250:118831.10.1016/j.conbuildmat.2020.118831 ↗
18. Kuranlı ÖF, et al. Evaluation of slag/fly Ash based geopolymer concrete with steel, polypropylene and polyamide fibers. Constr Build Mater. 2022;325:126747.10.1016/j.conbuildmat.2022.126747 ↗
19. Boulebnane MA, et al. Optimizing mix design methods for using slag, ceramic, and glass waste powders in eco-friendly geopolymer mortars. Archives Civil Mech Eng. 2024;25(1). https://doi.org/10.1007/s43452-024-01077-3.10.1007/s43452-024-01077-3 ↗
20. Huseien GF, et al. Waste ceramic powder incorporated alkali activated mortars exposed to elevated temperatures: performance evaluation. Constr Build Mater. Oct. 2018;187:307–17. https://doi.org/10.1016/J.CONBUILDMAT.2018.07.226.10.1016/J.CONBUILDMAT.2018.07.226 ↗
21. Huseien GF, Sam ARM, Shah KW, Mirza J. Effects of ceramic tile powder waste on properties of self-compacted alkali-activated concrete. Constr Build Mater. Mar. 2020;236:117574. https://doi.org/10.1016/J.CONBUILDMAT.2019.117574.10.1016/J.CONBUILDMAT.2019.117574 ↗
22. Sarkar M, Dana K. Partial replacement of Metakaolin with red ceramic waste in geopolymer. Ceram Int. Feb. 2021;47(3):3473–83. https://doi.org/10.1016/J.CERAMINT.2020.09.191.10.1016/J.CERAMINT.2020.09.191 ↗
23. Chokkalingam P, El-Hassan H, El-Dieb A, El-Mir A. Development and characterization of ceramic waste powder-slag blended geopolymer concrete designed using Taguchi method. Constr Build Mater. Sep. 2022;349:128744. https://doi.org/10.1016/J.CONBUILDMAT.2022.128744.10.1016/J.CONBUILDMAT.2022.128744 ↗
24. Rashad AM, Essa GMF, Mosleh YA, Morsi WM. Valorization of ceramic waste powder for compressive strength and durability of fly Ash geopolymer cement. Arab J Sci Eng. 2024;49(4):5653–65. https://doi.org/10.1007/s13369-023-08428-x.10.1007/s13369-023-08428-x ↗
25. Berkouche A, Belkadi AA, Benaddache L, Tayebi T, Aggoun S. Enhancing physical, mechanical, and durability properties of slag-based geopolymers through ceramic waste incorporation: A comprehensive optimization study. J Taiwan Inst Chem Eng. Jul. 2025;172:106144. https://doi.org/10.1016/J.JTICE.2025.106144.10.1016/J.JTICE.2025.106144 ↗
26. Abd Ellatief M, Abadel AA, Federowicz K, Abd Elrahman M. Mechanical properties, high temperature resistance and microstructure of eco-friendly ultra-high performance geopolymer concrete: Role of ceramic waste addition, Constr Build Mater, vol. 401, p. 132677, Oct. 2023, https://doi.org/10.1016/J.CONBUILDMAT.2023.13267710.1016/J.CONBUILDMAT.2023.132677 ↗
27. Chary KS, Munilakshmi N. Study of the morphological characteristics of geopolymer concrete based on eggshell and bauxite powder. J Building Pathol Rehabilitation. 2023;8(1). https://doi.org/10.1007/s41024-023-00290-6.10.1007/s41024-023-00290-6 ↗
28. Abdellatief M, Mortagi M, Hamouda H, Skrzypkowski K, Zagórski K, Zagórska A. Influence of silicate modulus and eggshell powder on the Expansion, mechanical Properties, and thermal conductivity of lightweight geopolymer foam concrete. Materials. 2025;18(9). https://doi.org/10.3390/ma18092088.10.3390/ma18092088 ↗
29. Abdellatief M, Ahmed YM, Taman M, Elfadaly E, Tang Y, Abadel AA. Physico-mechanical, thermal insulation properties, and microstructure of geopolymer foam concrete containing sawdust Ash and egg shell. J Building Eng. 2024;90:109374. https://doi.org/10.1016/j.jobe.2024.109374.10.1016/j.jobe.2024.109374 ↗
30. Zhao X, Wang H, Wang X, Zhao X. Sustainable application of waste eggshell as fillers in alkali-activated solid waste-based materials: varying treated methods and particle sizes. Constr Build Mater. Apr. 2024;425:136040. https://doi.org/10.1016/J.CONBUILDMAT.2024.136040.10.1016/J.CONBUILDMAT.2024.136040 ↗
31. Yuan X, Xu W, AlAteah AH, Mostafa SA. Evaluation of the performance of high-strength geopolymer concrete prepared with recycled coarse aggregate containing eggshell powder and rice husk ash cured at different curing regimes, Constr Build Mater, vol. 434, p. 136722, Jul. 2024, https://doi.org/10.1016/J.CONBUILDMAT.2024.13672210.1016/J.CONBUILDMAT.2024.136722 ↗
32. Mashri MOM, Johari MAM, Ahmad ZA, Mijarsh MJA (2023) Enhancing the properties of UPOFA-based geopolymer mortar via the incorporation of eggshell ash and silica fume. J Build Eng 65:105677 https://doi.org/10.1016/J.JOBE.2022.10567710.1016/J.JOBE.2022.105677 ↗
33. Concrete C, Cabinets M, Rooms M. Standard test method for length change of hardened Hydraulic-Cement mortar and. Current. 2010;4:1–7.
34. EN-196-1. Methods of testing cement-Part 1: Determination of strength. Quality and Standards Authority of Ethiopia, ES. (2005) 1176-1.
35. Standard A, ASTM C579. : Standard test methods for compressive strength of chemical-resistant mortars, grouts, monolithic surfacings, and polymer concretes. United States2012, 2012.
36. ASTM C. Standard test method for resistance of concrete to rapid freezing and thawing, 2008.
37. Nguyen KT, Ahn N, Le TA, Lee K. Theoretical and experimental study on mechanical properties and flexural strength of fly ash-geopolymer concrete. Constr Build Mater. 2016;106:65–77. https://doi.org/10.1016/j.conbuildmat.2015.12.033.10.1016/j.conbuildmat.2015.12.033 ↗
38. Ghafoor MT, Fujiyama C. Constitutive model for self-compacting geopolymer mortar based on fly Ash content. J Building Eng. 2023;71. https://doi.org/10.1016/j.jobe.2023.106462.10.1016/j.jobe.2023.106462 ↗
39. Stebbins JF, Xu Z. NMR evidence for excess non-bridging oxygen in an aluminosilicate glass. Nature. 1997;390(6655):60–2. https://doi.org/10.1038/36312.10.1038/36312 ↗
40. Yu TY, Ing DS, Choo CS. The effect of different curing methods on the compressive strength of eggshell concrete. Indian J Sci Technol. 2017;10(6):1–4.10.17485/ijst/2017/v10i6/111210 ↗
41. Shekhawat P, Sharma G, Singh RM. Strength behavior of alkaline activated eggshell powder and flyash geopolymer cured at ambient temperature. Constr Build Mater. 2019;223:1112–22. https://doi.org/10.1016/j.conbuildmat.2019.07.325.10.1016/j.conbuildmat.2019.07.325 ↗
42. Oh JE, Monteiro PJM, Jun SS, Choi S, Clark SM. The evolution of strength and crystalline phases for alkali-activated ground blast furnace slag and fly ash-based geopolymers. Cem Concr Res. 2010;40(2):189–96. https://doi.org/10.1016/j.cemconres.2009.10.010.10.1016/j.cemconres.2009.10.010 ↗
43. Kapeluszna E, Kotwica Ł, Różycka A, Gołek Ł. Incorporation of Al in C-A-S-H gels with various Ca/Si and Al/Si ratio: Microstructural and structural characteristics with DTA/TG, XRD, FTIR and TEM analysis, Constr Build Mater, vol. 155, pp. 643–653, Nov. 2017, https://doi.org/10.1016/J.CONBUILDMAT.2017.08.09110.1016/J.CONBUILDMAT.2017.08.091 ↗
44. Zhang B, et al. Effects of pretreated recycled powder substitution on mechanical properties and microstructures of alkali-activated cement. Constr Build Mater. 2023;406:133360. https://doi.org/10.1016/j.conbuildmat.2023.133360.10.1016/j.conbuildmat.2023.133360 ↗
45. Wang J, et al. Effect of CaO/Na2SiO3 ratio on mechanical properties, microstructures and environmental leaching characteristics of neutralization slag based geopolymers. Case Stud Constr Mater. Jul. 2024;20:e03021. https://doi.org/10.1016/J.CSCM.2024.E03021.10.1016/J.CSCM.2024.E03021 ↗
46. Yin B, et al. Enhancing cement-based composites via regulated hydration and concurrent construction of robust organic-inorganic network. Constr Build Mater. Sep. 2024;445:137902. https://doi.org/10.1016/J.CONBUILDMAT.2024.137902.10.1016/J.CONBUILDMAT.2024.137902 ↗
47. Berkouche A, et al. Modeling and optimization of eco-friendly cellular foam geopolymer with recycled concrete and glass wastes using Box-Behnken design. Structures. Jun. 2025;76:109054. https://doi.org/10.1016/J.ISTRUC.2025.109054.10.1016/J.ISTRUC.2025.109054 ↗
48. Rees CA, Provis JL, Lukey GC, van Deventer JSJ. Attenuated Total Reflectance Fourier Transform Infrared Analysis of Fly Ash Geopolymer Gel Aging, Langmuir, vol. 23, no. 15, pp. 8170–8179, Jul. 2007, https://doi.org/10.1021/la700713g10.1021/la700713g ↗
49. Walkley B et al. Phase evolution of C-(N)-A-S-H/N-A-S-H gel blends investigated via alkali-activation of synthetic calcium aluminosilicate precursors, Cem Concr Res, vol. 89, pp. 120–135, Nov. 2016, https://doi.org/10.1016/J.CEMCONRES.2016.08.01010.1016/J.CEMCONRES.2016.08.010 ↗
50. Zhang S, Li Z, Ghiassi B, Yin S, Ye G. Fracture properties and microstructure formation of hardened alkali-activated slag/fly Ash pastes. Cem Concr Res. Jun. 2021;144:106447. https://doi.org/10.1016/J.CEMCONRES.2021.106447.10.1016/J.CEMCONRES.2021.106447 ↗
51. Ismail I, Bernal SA, Provis JL, San Nicolas R, Hamdan S, Van Deventer JSJ. Modification of phase evolution in alkali-activated blast furnace slag by the incorporation of fly Ash. Cem Concr Compos. Jan. 2014;45:125–35. https://doi.org/10.1016/J.CEMCONCOMP.2013.09.006.10.1016/J.CEMCONCOMP.2013.09.006 ↗
52. Wang Y, et al. Study of acidic degradation of alkali-activated materials using synthetic C-(N)-A-S-H and N-A-S-H gels. Compos B Eng. Feb. 2022;230:109510. https://doi.org/10.1016/J.COMPOSITESB.2021.109510.10.1016/J.COMPOSITESB.2021.109510 ↗
53. Xiao R, Jiang X, Zhang M, Polaczyk P, Huang B. Analytical investigation of phase assemblages of alkali-activated materials in CaO-SiO2-Al2O3 systems: the management of reaction products and designing of precursors. Mater Des. 2020;194:108975. https://doi.org/10.1016/j.matdes.2020.108975.10.1016/j.matdes.2020.108975 ↗
54. Myers RJ, Bernal SA, Provis JL. Phase diagrams for alkali-activated slag binders. Cem Concr Res. May 2017;95:30–8. https://doi.org/10.1016/J.CEMCONRES.2017.02.006.10.1016/J.CEMCONRES.2017.02.006 ↗
55. Ye H, Radlińska A. Fly ash-slag interaction during alkaline activation: influence of activators on phase assemblage and microstructure formation. Constr Build Mater. Sep. 2016;122:594–606. https://doi.org/10.1016/J.CONBUILDMAT.2016.06.099.10.1016/J.CONBUILDMAT.2016.06.099 ↗
56. Walkley B, Kashani A, Sani M-A, Ngo TD, Mendis P. Examination of alkali-activated material nanostructure during thermal treatment. J Mater Sci. 2018;53(13):9486–503. https://doi.org/10.1007/s10853-018-2270-z.10.1007/s10853-018-2270-z ↗
57. Lloyd RR, Provis JL, Van Deventer JSJ. Microscopy and microanalysis of inorganic polymer cements. 1: remnant fly Ash particles. J Mater Sci. 2009;44:608–19.10.1007/s10853-008-3077-0 ↗
58. Ren J, Lai Y. Study on the durability and failure mechanism of concrete modified with nanoparticles and polypropylene fiber under freeze-thaw cycles and sulfate attack. Cold Reg Sci Technol. 2021;188:103301.10.1016/j.coldregions.2021.103301 ↗
59. Wang R, Hu Z, Li Y, Wang K, Zhang H. Review on the deterioration and approaches to enhance the durability of concrete in the freeze–thaw environment. Constr Build Mater. 2022;321:126371. https://doi.org/10.1016/j.conbuildmat.2022.126371.10.1016/j.conbuildmat.2022.126371 ↗
60. Wu T, Wu J, Zheng C, Wang J. Evaluation of freeze-thaw resistance of geopolymer concrete incorporating GFRP waste powder. J Building Eng. 2024;90:109465.10.1016/j.jobe.2024.109465 ↗
61. Liu C, Li Z, Bezuijen A, Chen L, Cachim P. Optimizing the shield tunnel backfilling Grouts with supplementary cementitious materials by response surface methodology. Constr Build Mater. Mar. 2024;421:135575. https://doi.org/10.1016/J.CONBUILDMAT.2024.135575.10.1016/J.CONBUILDMAT.2024.135575 ↗
62. Hammouche R, et al. Synergistic effects and optimization of cement kiln dust and glass powder incorporation in self compacting mortar using central composite design. Sci Rep. 2025;15(1):14529. https://doi.org/10.1038/s41598-025-98612-w.10.1038/s41598-025-98612-w ↗