Thickness-dependent spalling characteristics of sandstone with thin spray-on liners under dynamic loading
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Structural Response to Dynamic Loads · Fire effects on concrete materials · Rock Mechanics and Modeling
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Xie HP, Lu J, Li CB, Li MH, Gao MZ. Experimental study on the mechanical and failure behaviors of deep rock subjected to true triaxial stress: A review. Int J Min Sci Techno. 2022;32(5):915–50. https://doi.org/10.1016/j.ijmst.2022.05.006.10.1016/j.ijmst.2022.05.006 ↗
2. Mason DP, Stacey TR. Support to rock excavations provided by sprayed liners. Int J Rock Mech Min. 2008;45(5):773–88. https://doi.org/10.1016/j.ijrmms.2007.09.001.10.1016/j.ijrmms.2007.09.001 ↗
3. Guner D, Ozturk H. Creep behaviour investigation of a thin spray-on liner. Int J Rock Mech Min. 2018;108:58–66. https://doi.org/10.1016/j.ijrmms.2018.05.007.10.1016/j.ijrmms.2018.05.007 ↗
4. Ozturk H. Work of adhesion of thin Spray-On liners. Rock Mech Rock Eng. 2012;45(6):1095–102. https://doi.org/10.1007/s00603-012-0238-x.10.1007/s00603-012-0238-x ↗
5. Fowkes N, Teixeira de freitas JA, Stacey R. Crack repair using an elastic filler. J Mech Phys Solids. 2008;56(9):2749–58. https://doi.org/10.1016/j.jmps.2008.06.001.10.1016/j.jmps.2008.06.001 ↗
6. Li ZC, Tenney J, Chalmers D, Mitra R, Saydam S. Application of thin spray-on liners to enhance the pre-drained coal seam gas quality. Energ Explor Exploit. 2016;34(5):746–65. https://doi.org/10.2307/90007429.10.2307/90007429 ↗
7. Lee K, Kim D, Chang SH, Choi SW, Park B, Lee C. Numerical approach to assessing the contact characteristics of a polymer-based waterproof membrane. Tunn Undergr Sp Tech. 2018;79:242–9. https://doi.org/10.1016/j.tust.2018.05.015.10.1016/j.tust.2018.05.015 ↗
8. Komurlu E, Kesimal A. Improved performance of rock bolts using sprayed polyurea coating. Rock Mech Rock Eng. 2015;48(5):2179–82. https://doi.org/10.1007/s00603-014-0696-4.10.1007/s00603-014-0696-4 ↗
9. Ozturk H. Fracture mechanics interpretation of thin spray-on liner adhesion tests. Int J Adhes Adhes. 2012;34:17–23. https://doi.org/10.1016/j.ijadhadh.2012.01.001.10.1016/j.ijadhadh.2012.01.001 ↗
10. Li ZC, Hussain F, Mitra R, Saydam S. Effectiveness of thin spray-on liners as a gas management tool in underground coal mines. Int J Coal Geol. 2016;168:193–201. https://doi.org/10.1016/j.coal.2016.11.006.10.1016/j.coal.2016.11.006 ↗
11. Zhang J, Zhuo QS, Yang S, Yang T, Wang B, Bai WY, Wu JJ, He YF, Li HR. Study on antiweathering support technology of thin spray-on liners in shallowly buried coal seam roadway under corrosion condition. Shock Vib. 2022;2022:7065650. https://doi.org/10.1155/2022/7065650.10.1155/2022/7065650 ↗
12. Ozturk H, Guner D. Failure analysis of thin spray-on liner coated rock cores. Eng Fail Anal. 2017;79:25–33. https://doi.org/10.1016/j.engfailanal.2017.03.024.10.1016/j.engfailanal.2017.03.024 ↗
13. Ozturk H, Tannant DD. Thin spray-on liner adhesive strength test method and effect of liner thickness on adhesion. Int J Rock Mech Min. 2010;47(5):808–15. https://doi.org/10.1016/j.ijrmms.2010.05.004.10.1016/j.ijrmms.2010.05.004 ↗
14. Guner D, Ozturk H. Experimental and numerical analysis of the effects of curing time on tensile mechanical properties of thin spray-on liners. Rock Mech Rock Eng. 2016;49(8):3205–22. https://doi.org/10.1007/s00603-016-0997-x.10.1007/s00603-016-0997-x ↗
15. Li ZC, Nocelli B, Saydam S. Effect of rock strength and surface roughness on adhesion strength of thin spray-on liners. Int J Rock Mech Min. 2017;91:195–202. https://doi.org/10.1016/j.ijrmms.2016.11.011.10.1016/j.ijrmms.2016.11.011 ↗
16. Ozturk H, Tannant DD. Influence of rock properties and environmental conditions on thin spray-on liner adhesive bond. Int J Rock Mech Min. 2011;48(7):1196–8. https://doi.org/10.1016/j.ijrmms.2011.06.006.10.1016/j.ijrmms.2011.06.006 ↗
17. Chen LJ, Zhou Z, Liu GM, Cui XF, Dong QZ, Cao HX. Effects of substrate materials and liner thickness on the adhesive strength of the novel thin spray-on liner. Adv Mech Eng. 2020;12(2):168781402090457. https://doi.org/10.1177/1687814020904574.10.1177/1687814020904574 ↗
18. Qiao QQ, Nemcik J, Porter I. A new approach for determination of the shear bond strength of thin spray-on liners. Int J Rock Mech Min. 2015;73:54–61. https://doi.org/10.1016/j.ijrmms.2014.09.023.10.1016/j.ijrmms.2014.09.023 ↗
19. Yilmaz H. Comparison of tensile-bond strength of thin spray-on liners. Int J Min Reclam Env. 2013;27(1):56–71. https://doi.org/10.1080/17480930.2012.665219.10.1080/17480930.2012.665219 ↗
20. Kanda MJ, Stacey TR. Tensile strength sensitivity of thin spray-on liners to changes in environmental conditions. J S Afr I Min Metall. 2020;120(4):251–9. https://doi.org/10.17159/2411-9717/955/2020.10.17159/2411-9717/955/2020 ↗
21. Kanda MJ, Stacey TR. Sensitivity of shotcrete Brazilian discs coated with thin spray-on liners to environmental conditions. J S Afr I Min Metall. 2021;121(7):351–60. https://doi.org/10.17159/2411-9717/1430/2021.10.17159/2411-9717/1430/2021 ↗
22. du Plessis M, Malan DF. Investigating the use of polymer-modified cementitious thin spray-on liners as Stope face support. Int J Rock Mech Min. 2021;142:104728. https://doi.org/10.1016/j.ijrmms.2021.104728.10.1016/j.ijrmms.2021.104728 ↗
23. Mpunzi P, Masethe R, Rizwan M, Stacey TR. Enhancement of the tensile strengths of rock and shotcrete by thin spray-on liners. Tunn Undergr Sp Tech. 2015;49:369–75. https://doi.org/10.1016/j.tust.2015.05.013.10.1016/j.tust.2015.05.013 ↗
24. Zhao YX, Fu X, Shi YY, Zhao BW, Fu XY, Zhang XF, Chen Y. Research on mechanical behavior and energy evolution of coal and rocks with different thin spray-on liners thickness under uniaxial compressive loading. Sustainability. 2022;14(10):5909. https://doi.org/10.3390/su14105909.10.3390/su14105909 ↗
25. Han Y, Li SC, Yuan C, Feng XD, Yang SY, Ye SJ. Investigation of mechanical properties in thin spray-on liner coated sandstone: comparative study of unfilled and filled flaws. Constr Build Mater. 2024;429:136189. https://doi.org/10.1016/j.conbuildmat.2024.136189.10.1016/j.conbuildmat.2024.136189 ↗
26. Shan ZJ, Porter I, Nemcik J, Baafi E, Zhang ZY. Investigation on the rock surface support performance of welded steel mesh and thin spray-on liners using full-scale laboratory testing. Rock Mech Rock Eng. 2020;53(1):171–83. https://doi.org/10.1007/s00603-019-01895-5.10.1007/s00603-019-01895-5 ↗
27. Wang C, Tannant DD. Rock fracture around a highly stressed tunnel and the impact of a thin tunnel liner for ground control. Int J Rock Mech Min. 2004;41:676–83. https://doi.org/10.1016/j.ijrmms.2004.03.118.10.1016/j.ijrmms.2004.03.118 ↗
28. Wang SM, Wang JQ, Xiong XR, Ren ZJ, Weng L, Manoj K, Zhou J. Dynamic compression mechanical properties of sandstone supported by thin spray-on liner. Mech Based Des Struc. 2023;52(5):2554–68. https://doi.org/10.1080/15397734.2023.2185635.10.1080/15397734.2023.2185635 ↗
29. Wang SM, Xiong XR, Wang JQ, Yan SJ, Wu QH, Weng L. Test study on dynamic anti-tension performance of sandstone under protection of TSL material. J Vib Shock. 2023;42(21):192–9. https://doi.org/10.13465/j.cnki.jvs.2023.21.023.10.13465/j.cnki.jvs.2023.21.023 ↗
30. Archibald JF, Dirige PA. Development of thin, spray-on liner and composite superliner area supports for damage mitigation in blast-and rockburst-induced rock failure events. WIT Trans Built Environ. 2006;87:237–46. https://doi.org/10.2495/SU060241.10.2495/SU060241 ↗
31. Zhang ZG, Shi XZ, Qiu XY, Ouyang J. On-site tests investigating the effects of blasting vibration amplitude on the dynamic response of thin spray-on liner. Tunn Undergr Sp Tech. 2024;145:105620. https://doi.org/10.1016/j.tust.2024.105620.10.1016/j.tust.2024.105620 ↗
32. Zhang ZG, Shi XZ, Qiu XY, Ouyang J, Wang WY. In situ tests comparing the support effects of thin spray-on liner and shotcrete on a roadway subjected to blasting. Rock Mech Rock Eng. 2024;57(3):1669–93. https://doi.org/10.1007/s00603-023-03654-z.10.1007/s00603-023-03654-z ↗
33. Qiu JD, Li DY, Li XB, Zhu QQ. Numerical investigation on the stress evolution and failure behavior for deep roadway under blasting disturbance. Soil Dyn Earthq Eng. 2020;137:106278. https://doi.org/10.1016/j.soildyn.2020.106278.10.1016/j.soildyn.2020.106278 ↗
34. Bai YF, Wang SM, Shen Y, Wang JQ, Wu QH, Zhou J, Li CQ. Influence of stress wave incident angles on spalling failure in rock–mortar composites: experimental and simulation study. Arch Civ Mech Eng. 2024;24(2):104. https://doi.org/10.1007/s43452-024-00917-6.10.1007/s43452-024-00917-6 ↗
35. Zhou ZL, Li XB, Liu AH, Zou Y. Stress uniformity of split Hopkinson pressure bar under half-sine wave loads. Int J Rock Mech Min. 2011;48(4):697–701. https://doi.org/10.1016/j.ijrmms.2010.09.006.10.1016/j.ijrmms.2010.09.006 ↗
36. Wang SM, Wang JQ, Xiong XR, Chen ZH, Gui YL, Zhou J. Effect of oblique incident wave perturbation on rock spalling: an insight from DEM modelling. J Cent South Univ. 2023;30(6):1981–92. https://doi.org/10.1007/s11771-023-5354-0.10.1007/s11771-023-5354-0 ↗
37. Zhao HT, Tao M, Li XB, Cao WZ, Wu CQ. Estimation of spalling strength of sandstone under different pre-confining pressure by experiment and numerical simulation. Int J Impact Eng. 2019;133:103359. https://doi.org/10.1016/j.ijimpeng.2019.103359.10.1016/j.ijimpeng.2019.103359 ↗
38. Li XB, Zou Y, Zhou LL. Numerical simulation of the rock SHPB test with a special shape striker based on the discrete element method. Rock Mech Rock Eng. 2014;47(5):1693–709. https://doi.org/10.1007/s00603-013-0484-6.10.1007/s00603-013-0484-6 ↗
39. Mudau A, Stacey TR, Govender RA. Experimental investigations into sacrificial support for containment of rockburst damage. Proceedings of the Eighth International Conference on Deep and High Stress Mining. 2017;435 – 46. https://doi.org/10.36487/ACG_rep/1704_31_Mudau10.36487/ACG_rep/1704_31_Mudau ↗
40. Tao M, Ma A, Zhao R, Hashemi SS. Spallation damage mechanism of prefabricated elliptical holes by different transient incident waves in sandstones. Int J Impact Eng. 2020;146:103716. https://doi.org/10.1016/j.ijimpeng.2020.103716.10.1016/j.ijimpeng.2020.103716 ↗
41. Zhang J, Huang LQ, Li XB. Experimental study on mechanical properties and failure characteristics of sandstone containing a pre-existing surface flaw under dynamic loading. Eng Fail Anal. 2022;142:106780. https://doi.org/10.1016/j.engfailanal.2022.106780.10.1016/j.engfailanal.2022.106780 ↗
42. Potyondy DO, Cundall PA. A bonded-particle model for rock. Int J Rock Mech Min. 2004;41(8):1329–64. https://doi.org/10.1016/j.ijrmms.2004.09.011.10.1016/j.ijrmms.2004.09.011 ↗
43. Wang JQ, Wang SM, Chen ZH, Zou Y, Cao WZ, Zhou J. Dynamic response and failure analysis of underground openings to oblique wave incidence. Int J Geomech. 2024;24(3):04023296. https://doi.org/10.1061/IJGNAI.GMENG-9291.10.1061/IJGNAI.GMENG-9291 ↗
44. Ozturk H, Guner D. Laboratory and distinct element analysis of the deformability behaviour of thin spray-on liners. Int J Rock Mech Min. 2019;123:104118. https://doi.org/10.1016/j.ijrmms.2019.104118.10.1016/j.ijrmms.2019.104118 ↗
45. Bai YF, Wang SM, Chen YQ, Wang JQ, Wu QH, Zhou J, Li CQ. Numerical investigation on failure characteristics of concrete lining in deep tunnel subject to oblique incidence of stress waves. Arch Civ Mech Eng. 2025;25(2). https://doi.org/10.1007/s43452-025-01125-6.10.1007/s43452-025-01125-6 ↗
46. Potyondy DO. The bonded-particle model as a tool for rock mechanics research and application: current trends and future directions. Geosystem Eng. 2015;18(1). https://doi.org/10.1080/12269328.2014.998346.10.1080/12269328.2014.998346 ↗
47. Ding XB, Zhang LY. A new contact model to improve the simulated ratio of unconfined compressive strength to tensile strength in bonded particle models. Int J Rock Mech Min. 2014;69:111–9. https://doi.org/10.1016/j.ijrmms.2014.03.008.10.1016/j.ijrmms.2014.03.008 ↗
48. Wu SC, Xu XL. A study of three intrinsic problems of the classic discrete element method using flat-joint model. Rock Mech Rock Eng. 2016;49(5):1813–30. https://doi.org/10.1007/s00603-015-0890-z.10.1007/s00603-015-0890-z ↗
49. Yuan GA, Li XJ, Hao PW, Li DW, Pan JL, Li AG. Application of flat-joint contact model for uniaxial compression simulation of large stone porous asphalt mixes. Constr Build Mater. 2020;238:117695. https://doi.org/10.1016/j.conbuildmat.2019.117695.10.1016/j.conbuildmat.2019.117695 ↗
50. Bahaaddini M, Sheikhpourkhani AM, Mansouri H. Flat-joint model to reproduce the mechanical behaviour of intact rocks. Eur J Environ Civ En. 2021;25(8):1427–48. https://doi.org/10.1080/19648189.2019.1579759.10.1080/19648189.2019.1579759 ↗
51. Wang SM, Bai YF, Long WT, Wu QH, Li CQ, Zhou J. Influence of thin spray-on layer (TSL) wrapping support on the spalling failure characteristics of sandstone. Int J Rock Mech Min. 2025;188:106054. https://doi.org/10.1016/j.ijrmms.2025.106054.10.1016/j.ijrmms.2025.106054 ↗