journal article·2025-09-04Open access

Research and development of fluid power elements and systems made from plastics

Jarosław Stryczek, Michał Banaś, Piotr Stryczek

Abstract

Abstract The paper concerns the innovative research area “Fluid power elements and systems made of plastics”. The aim of the work was to present original research on the topic of design, manufacturing and examination of plastic fluid power elements and systems, in a comprehensive way. It is presented in two stages. At the first stage, a set of prototype hydraulic components from plastics are presented. These are: gerotor pump, relief and on/off valves, and cylinder. A prototype hydraulic system from plastics was built from these components. At the second stage, the acquired knowledge and experience had been used for the development of advanced components and in experimental hydraulic axis. The results of the work include new knowledge in areas such as plastics selection, detailed design and manufacturing of components, experimental testing, and the formulation of special design rules arising from the use of plastics. In addition, a system of fluid power components made from plastics was developed, capable of operating at working pressures ranging from 3 to 6.3 MPa. The work also led to the creation of new hydraulic components, including a microgerotor pump with an electromagnetic drive and a hydraulic axis incorporating plastic elements. The directions of development of the research area “Fluid power elements and systems made of plastics” have been presented.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Material Properties and Applications · Additive Manufacturing and 3D Printing Technologies · Recycling and Waste Management Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Holmes M. Aerospace looks to composites for solutions. Reinf Plast. 2017;61(4):237–41. https://doi.org/10.1016/j.repl.2017.06.079.10.1016/j.repl.2017.06.079 ↗
2. Miller L, Soulliere K, Sawyer-Beaulieu S, Tseng S, Tam E. Challenges and alternatives to plastics recycling in the automotive sector. Materials. 2014;7:5883–902. https://doi.org/10.3390/ma7085883.10.3390/ma7085883 ↗
3. Żywica G, Kaczmarczyk TZ, Ihnatowicz E. The use of modern plastics for the construction of high speed fluid-flow machinery. Mechanik. 2018;91:508–10. https://doi.org/10.17814/mechanik.2018.7.67.10.17814/mechanik.2018.7.67 ↗
4. Bossuyt F, Dunphy S, Vanfleteren J, De Baets J, Morillo K, Brand J. Plastic electronics based conformable electronic circuits. 2012 4th Electronic System-Integration Technology Conference, ESTC 2012 (2012) https://doi.org/10.1109/ESTC.2012.6542085.10.1109/ESTC.2012.6542085 ↗
5. Silva TR, Azevedo ARG, Cecchin D, Marvila MT, Amran M, Fediuk R, Vatin N, Karelina M, Klyuev S, Szelag M. Application of plastic wastes in construction materials: A review using the concept of life-cycle assessment in the context of recent research for future perspectives. Materials. 2021;14(13). https://doi.org/10.3390/ma14133549.10.3390/ma14133549 ↗
6. Look EH. Industry developments in plastic pipe for water systems. Journal (American Water Works Association). 1965;57(11):1385–9 (Accessed 2024-04-19).10.1002/j.1551-8833.1965.tb01526.x ↗
7. Ebnesajjad S. (ed.): Handbook of Biopolymers and Biodegradable Plastics. Plastics Design Library, p. . William Andrew Publishing, Boston (2013). https://doi.org/10.1016/B978-1-4557-2834-3.01001-6, https://www.sciencedirect.com/science/article/pii/B9781455728343010016.10.1016/B978-1-4557-2834-3.01001-6 ↗
8. Kieszek J. Nowoczesne zastosowania termoplastów w medycynie. Projektowanie, Konstrukcje inzynierskie 2011;46/47(7/8)
9. Rodionov L, Stryczek J, Rekadze P, Stryczek P, Gafurov S, Prokofiev A, Shakhmatov E. Challenges in design process of gear micropump from plastics. Archives of Civil and Mechanical Engineering. 2021;21(1):34. https://doi.org/10.1007/s43452-020-00164-5.10.1007/s43452-020-00164-5 ↗
10. Gamez-Montero P, Antoniak P, Castilla R, Freire J, Krawczyk J, Stryczek J, Codina E. Magnet-sleeve-sealed mini trochoidal-gear pump prototype with polymer composite gear. Energies. 2017;10:1458. https://doi.org/10.3390/en10101458.10.3390/en10101458 ↗
11. Rokkala M. Analysis of slipper structures in water hydraulic axial piston pumps. PhD thesis, Tampere University of Technology;2012. https://researchportal.tuni.fi/files/1379533/rokala.pdf
12. Solazzi L. Design and experimental tests on hydraulic actuator made of composite material. Compos Struct. 2020;232: 111544. https://doi.org/10.1016/j.compstruct.2019.111544.10.1016/j.compstruct.2019.111544 ↗
13. Solazzi L. Stress variability in multilayer composite hydraulic cylinder. Compos Struct. 2021;259: 113249. https://doi.org/10.1016/J.COMPSTRUCT.2020.113249.10.1016/J.COMPSTRUCT.2020.113249 ↗
14. Mantovani S. Feasibility Analysis of a Double-Acting Composite Cylinder in High-Pressure Loading Conditions for Fluid Power Applications. Appl Sci. 2020;10(3):826. https://doi.org/10.3390/app10030826.10.3390/app10030826 ↗
15. Błażejewski W. Kompozytowe Zbiorniki Wysokociśnieniowe Wzmocnione Włóknami Według Wzorów Mozaikowych. Wrocław: Oficyna Wydawnicza Politechniki Wrocławskiej; 2013.
16. Lubecki, M., Stosiak Michałand Gazińska, M.: Numerical and Experimental Analysis of the Base of a Composite Hydraulic Cylinder Made of PET. In: Stryczek, J., Warzyńska, U. (eds.) Advances in Hydraulic and Pneumatic Drives and Control 2020, pp. 396–405. Springer, Cham (2021)10.1007/978-3-030-59509-8_36 ↗
17. Skowrońska J, Zaczyński J, Kosucki A, Stawiński L. Modern materials and surface modification methods used in the manufacture of hydraulic actuators. In: Stryczek J, Warzyńska U, editors. Advances in Hydraulic and Pneumatic Drives and Control 2020. Cham: Springer; 2021. p. 427–39. https://doi.org/10.1007/978-3-030-59509-8_39.10.1007/978-3-030-59509-8_39 ↗
18. Lubecki M, Stosiak M, Skačkauskas P, Karpenko M, Deptuła A, Urbanowicz K. Development of composite hydraulic actuators: A review. Actuators. 2022;11(12). https://doi.org/10.3390/act11120365.10.3390/act11120365 ↗
19. Mancini SD, Neto AdOS, Cioffi MOH, Bianchi EC. Replacement of metallic parts for polymer composite materials in motorcycle oil pumps. J Reinf Plast Compos. 2017;36(2):149–60. https://doi.org/10.1177/0731684416673727.10.1177/0731684416673727 ↗
20. Marciniak L, Banaś M, Stryczek J. The design and theoretical and experimental study of the plastic hydraulic valves. In: 9th FPNI Ph.D. symposium on fluid power. American Society of Mechanical Engineers; 2016. pp. 001–013. https://doi.org/10.1115/FPNI2016-1511. https://asmedigitalcollection.asme.org/FPST/proceedings-abstract/FPNI2016/50473/V001T01A007/229660.10.1115/FPNI2016-1511 ↗
21. Bonanno A. Materiali polimerici applicazioni Oleodinamica Pneumatica. 2008;4:76.
22. Harnisch M. Kunststoffe in fluidtechnischen Antrieben. Oelhydraulik und Pneumatik. 2013;11–12.
23. Stryczek J, Banaś M, Krawczyk J, Marciniak L, Stryczek P. The fluid power elements and systems made of plastics. Procedia Engineering. 2017;176:600–9. https://doi.org/10.1016/j.proeng.2017.02.303. Proceedings of the 3rd International Conference on Dynamics and Vibroacoustics of Machines (DVM2016) June 29–July 01, 2016 Samara, Russia.10.1016/j.proeng.2017.02.303 ↗
24. Stryczek S. Naped hydrostatyczny. Tom I Elementy. Warszawa: WNT; 1995.
25. Stryczek, P.: Challenges in the Designing Process of Hydraulic Cylinders Made of Plastics. IEEE Global Fluid Power Society PhD Symposium. 2022 Global Fluid Power Society PhD Symposium (GFPS), 12–14 October 2022. Napoli: Italy; 2022.
26. Pahl G, Beitz W, Feldhusen J, Grote K-H. Engineering design. A systematic approach. London: Springer; 2007. https://doi.org/10.1007/978-1-84628-319-2.10.1007/978-1-84628-319-2 ↗
27. Kim A, Doudkin M, Vavilov A, Guryanov G. New vibroscreen with additional feed elements. Archives of Civil and Mechanical Engineering. 2017;17(4):786–94. https://doi.org/10.1016/j.acme.2017.02.009.10.1016/j.acme.2017.02.009 ↗
28. Crawford RJ. Preface to the first edition. In: Crawford, R.J. (ed.) Plastics Engineering (Third Edition), Third edition edn., p. . Butterworth-Heinemann, Oxford (1998). https://doi.org/10.1016/B978-075063764-0/50002-9. https://www.sciencedirect.com/science/article/pii/B978075063764050002910.1016/B978-075063764-0/50002-9 ↗
29. Krawczyk J, Stryczek J. Design and experimental research of a plastic gerotor pump. In: 2018 Global Fluid Power Society PhD Symposium (GFPS), 2018;1–8. https://doi.org/10.1109/GFPS.2018.8472370.10.1109/GFPS.2018.8472370 ↗
30. Biernacki K, Stryczek J. Analysis of stress and deformation in plastic gears used in gerotor pumps. The Journal of Strain Analysis for Engineering Design. 2010;45(7):465–79. https://doi.org/10.1243/03093247JSA630.10.1243/03093247JSA630 ↗
31. Stryczek J, Bednarczyk S, Biernacki K. Gerotor pump with pom gears: Design, production technology, research. Archives of Civil and Mechanical Engineering. 2014;14(3):391–7. https://doi.org/10.1016/j.acme.2013.12.008.10.1016/j.acme.2013.12.008 ↗
32. Stryczek J. Fundamentals of Designing Hydraulic Gear Machines. Warszawa: Wydawnictwo Naukowe PWN; 2020. p. 352.
33. Stryczek J, Stryczek P. Synthetic approach to the design, manufacturing and examination of gerotor and orbital hydraulic machines. Energies. 2021;14(3):34534636. https://doi.org/10.3390/en14030624.10.3390/en14030624 ↗
34. Stryczek J, Bednarczyk S, Codina E, Gamez-Montero P, Ivanovic L, Matejic M. Gears or rotors - three approaches to design of working units of hydraulic machines. IOP Conference Series Materials Science and Engineering. 2019;659: 012006. https://doi.org/10.1088/1757-899X/659/1/012006.10.1088/1757-899X/659/1/012006 ↗
35. Roy D, Maiti R, Das PK, Antoniak P, Stryczek J. Estimations of leakages through gaps at ‘transition’ contacts using computational fluid dynamics and photoimaging of core-flow cavitation features in gerotor pumps. Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering. 2021;235(5):1748–70. https://doi.org/10.1177/09544089211033691.10.1177/09544089211033691 ↗
36. Robison AJ, Vacca A. Design of asymmetric gerotor pumps. In: Stryczek J, Warzyńska U, editors. Advances in Hydraulic and Pneumatic Drives and Control 2020. Cham: Springer; 2021. p. 90–101.10.1007/978-3-030-59509-8_8 ↗
37. Stryczek J, Biernacki K, Krawczyk J. Designing gear pump bodies using fem. In: Rusiński, E., Pietrusiak, D. (eds.) Proceedings of the 14th International Scientific Conference: Computer Aided Engineering, pp. 767–783. Springer, Cham (2019).10.1007/978-3-030-04975-1_89 ↗
38. Rybarczyk D, Milecki A. The use of a model-based controller for dynamics improvement of the hydraulic drive with proportional valve and synchronous motor. Energies. 2022;15:3111. https://doi.org/10.3390/en15093111.10.3390/en15093111 ↗
39. Schultze T, Weber J, Banaś M, Stryczek P. Plastic components for electro-hydrostatic drives. In: Fluid Power: Digital, Reliable, Sustainable, 13th International Fluid Power Conference Aachen, 2023;250–261. The 13th International Fluid Power Conference, 13 IFK March 21-23 Aachen, Germany
40. Banaś M, Antoniak P, Marciniak L, Stryczek J. Visualization of flow phenomena in hydraulic throttle valves of plastics. MATEC Web of Conferences. 2018;211:19001. https://doi.org/10.1051/matecconf/201821119001.10.1051/matecconf/201821119001 ↗
41. Warzyńska U, Banaś M, Stryczek J. Computational and experimental study of plastic valves with 3d printed poppets. In: Stryczek J, Warzyńska U, editors. Advances in Hydraulic and Pneumatic Drives and Control 2023. Cham: Springer; 2024. p. 228–37. https://doi.org/10.1007/978-3-031-43002-2_21.10.1007/978-3-031-43002-2_21 ↗
42. Stryczek J, Antoniak P, Banaś M, Stryczek P, Luhovskyi O, Kovaliov V, Kostiuk D, Jahno O. Research into ultrasonic and hydrodynamic cavitation phenomena in a hydraulic system. Mechanics and Advanced Technologies. 2021;5:33–40. https://doi.org/10.20535/2521-1943.2021.5.1.234496.10.20535/2521-1943.2021.5.1.234496 ↗
43. Stryczek P. Research on deformation of hydraulic cylinders made of plastics. Energies. 2023;16:5708. https://doi.org/10.3390/en16155708.10.3390/en16155708 ↗
44. Gebhardt N, Weber J. Hydraulik – Fluid-Mechatronik Grundlagen, Komponenten, Systeme, Messtechnik und Virtuelles Engineering: Grundlagen, Komponenten, Systeme, Messtechnik und Virtuelles Engineering. Heidelberg: Springer Vieweg Berlin; 2020. https://doi.org/10.1007/978-3-662-60664-3.10.1007/978-3-662-60664-3 ↗
45. Śliwiński P. The methodology for determining the theoretical and actual working volume of a hydraulic motor based on the characteristics of effective absorbency versus pressure drop in the motor. In: Stryczek J, Warzyńska U, editors. Advances in Hydraulic and Pneumatic Drives and Control 2023. Cham: Springer; 2024. p. 44–57. https://doi.org/10.1007/978-3-031-43002-2_5.10.1007/978-3-031-43002-2_5 ↗
46. Guryanov G, Doudkin M, Kim A, Vasilieva O. New combined centrifuge for cleaning the working fluids of hydraulic drives from mechanical contaminations. In: Stryczek J, Warzyńska U, editors. Advances in Hydraulic and Pneumatic Drives and Control 2023. Cham: Springer; 2024. p. 3–13.10.1007/978-3-031-43002-2_1 ↗
47. Siwulski T, Warzyńska U. Numerical investigation of the influence of the inlet nozzle diameter on the degree of fluid exchange process in a hydraulic cylinder. Engineering Applications of Computational Fluid Mechanics. 2021;15(1):1243–58. https://doi.org/10.1080/19942060.2021.1958379.10.1080/19942060.2021.1958379 ↗
48. Kujawa M, Kowalewski P, Wieleba W. The influence of deformation under tension on some mechanical and tribological properties of high-density polyethylene. Polymers. 2019;11(9). https://doi.org/10.3390/polym11091429.10.3390/polym11091429 ↗
49. Ptak A, Taciak P, Wieleba W. Effect of temperature on the tribological properties of selected thermoplastic materials cooperating with aluminium alloy. Materials. 2021;14:7318. https://doi.org/10.3390/ma14237318.10.3390/ma14237318 ↗
50. Biernacki K. Analysis of the material and design modifications influence on strength of the cycloidal gear system. Int J Precis Eng Manuf. 2015;16:537–46. https://doi.org/10.1007/s12541-015-0073-6.10.1007/s12541-015-0073-6 ↗
51. Banaś M. Volumetric efficiency of a hydraulic pump with plastic gears working with tap water. In: Stryczek J, Warzyńska U, editors. Advances in Hydraulic and Pneumatic Drives and Control 2020. Cham: Springer; 2021. p. 355–66.10.1007/978-3-030-59509-8_32 ↗