Investigation on the mechanism of improving the forming quality of cavitation water jet micro-punching by using a rubber membrane
Source abstract
Abstract
Cavitation water jet micro-punching (CWJP) is a high-strain-rate micro-punching technique that utilizes high-energy shock waves generated by the collapse of cavitation bubbles to perform micro-punching on metal foils. However, defects such as brittle fracture, warpage deformation, and edge tearing often occur in the micro-punched holes due to the reverse impact of high-speed backflow. To solve this issue, a novel rubber membrane-assisted cavitation water jet micro-punching (RA-CWJP) technique was proposed in the present work, in which a flexible rubber membrane was introduced as a soft punch to prevent cavitation water jet from entering the die hole. Comparative experiments of the CWJP and RA-CWJP processes were conducted on 50 μm-thick T2 copper foils. The forming quality of micro-punched holes in both processes was evaluated based on microscopic morphology (fracture surface and cross section), shape, and dimensional accuracy. Additionally, the effect of high-speed backflow on the CWJP process was analyzed in detail. Fluid–solid coupling numerical simulations were conducted to better understand the improvement mechanism of the rubber membrane on the forming quality of micro-punched holes. The research results show that applying a 200 μm-thick rubber membrane to the CWJP process prevents brittle fractures, warpage, and edge tearing caused by the reverse impact force of backflow. Meanwhile, the rubber membrane also increases the depth of the shearing zone, and reduces both the rollover zone and burr formation. Compared to the CWJP process, the shape and dimensional accuracy of micro-punched holes formed by the RA-CWJP process increased by 16.1%–63.5% and 45.4%–82.2%, respectively. In the RA-CWJP process, the excellent fluidity and compressibility of the rubber membrane enable precise shearing separation of the copper foil along the die edge. Furthermore, the rubber membrane reduces elastic recovery after punching through enhanced plastic deformation, significantly improving the dimensional accuracy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Erosion and Abrasive Machining · High-Velocity Impact and Material Behavior · Surface Treatment and Residual Stress
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Pradeep Raja C, Ramesh T. Influence of size effects and its key issues during microforming and its associated processes – a review. Eng Sci Technol Int J. 2021;24:556–70. https://doi.org/10.1016/j.jestch.2020.08.007.10.1016/j.jestch.2020.08.007 ↗
2. Cui JK, Liu HX, Ma YJ, Li MW, Gong JX, Zhang YF, Wang X. Flexible microblanking of amorphous alloys under laser dynamic loading. J Manuf Processes. 2020;56:718–25. https://doi.org/10.1016/j.jmapro.2020.05.041.10.1016/j.jmapro.2020.05.041 ↗
3. Geiger M, Kleiner M, Eckstein R, Tiesler N, Engel U. Microforming. CIRP Ann. 2001;50:445–62. https://doi.org/10.1016/S0007-8506(07)62991-6.10.1016/S0007-8506(07)62991-6 ↗
4. Presz W., Rosochowski A. The influence of grain size on surface quality of microformed components. In Proceedings of the The 9th International Conference on Material Forming: ESAFORM, Glasgow, U.K., 2006; p. 587–90.
5. Tiesler N. Microforming-size effects in friction and their influence on extrusion processes. Wire. 2002;52:34–8.
6. Tang ZJ, Du H, Lang LH, Jiang SS, Chen J, Zhang JT. Experimental investigation into the electropulsing assisted punching process of 2024T4 aluminum alloy sheet. J Mater Process Technol. 2018;253:86–98. https://doi.org/10.1016/j.jmatprotec.2017.11.011.10.1016/j.jmatprotec.2017.11.011 ↗
7. Tanaka SGR, Bataev I, Nishi M, Balagansky I, Hokamoto K. Micropunching large-area metal sheets using underwater shock wave: Experimental study and numerical simulation. Int J Mach Tools Manuf. 2019;147: 103457. https://doi.org/10.1016/j.ijmachtools.2019.103457.10.1016/j.ijmachtools.2019.103457 ↗
8. Cheng C, Wan M, Meng B, Fu MW. Characterization of the microscale forming limit for metal foils considering free surface roughening and failure mechanism transformation. J Mater Process Technol. 2019;272:111–24. https://doi.org/10.1016/j.jmatprotec.2019.05.012.10.1016/j.jmatprotec.2019.05.012 ↗
9. Zheng C, Sun S, Song LB, Zhang GF, Luan YG, Ji Z, Zhang JH. Dynamic fracture characteristics of Fe78Si9B13 metallic glass subjected to laser shock loading. Appl Surf Sci. 2013;286:121–5. https://doi.org/10.1016/j.apsusc.2013.09.033.10.1016/j.apsusc.2013.09.033 ↗
10. Zheng C, Zhang X, Zhang YL, Ji Z, Luan YG, Song LB. Effects of laser power density and initial grain size in laser shock punching of pure copper foil. Opt Lasers Eng. 2018;105:35–42. https://doi.org/10.1016/j.optlaseng.2017.12.009.10.1016/j.optlaseng.2017.12.009 ↗
11. Zheng C, Ji Z, Song LB, Fu J, Zhu YH, Zhang JH. Variation of fracture mode in micro-scale laser shock punching. Opt Laser Technol. 2015;72:25–32. https://doi.org/10.1016/j.optlastec.2015.03.009.10.1016/j.optlastec.2015.03.009 ↗
12. Wang X, Du DZ, Zhang H, Shen ZB, Liu HX, Zhou JZ, Liu H, Hu Y, Gu CX. Investigation of microscale laser dynamic flexible forming process—simulation and experiments. Int J Mach Tools Manuf. 2013;67:8–17. https://doi.org/10.1016/j.ijmachtools.2012.12.003.10.1016/j.ijmachtools.2012.12.003 ↗
13. Liu HX, Jiang CK, Liu F, Ma YJ, Wang X. Numerical and experimental investigations of laser shock hydraulic microforming for thin-walled foils. Thin Walled Struct. 2019;143: 106219. https://doi.org/10.1016/j.tws.2019.106219.10.1016/j.tws.2019.106219 ↗
14. Huang Y, Wu Z, Dong P, Liu R, Chen Y, Han X. Investigation of electromagnetic punching process with adjustable collision velocity for ultra-thin titanium sheet. Arch Civ Mech Eng. 2023;23:263. https://doi.org/10.1007/s43452-023-00803-7.10.1007/s43452-023-00803-7 ↗
15. Zhao QJ, Xu J, Wang CJ, Shan DB, Guo B. Electromagnetic micro-punching process of T2 copper foil. Adv Mat Res. 2015;1120–1121:1220–5. https://doi.org/10.4028/www.scientific.net/AMR.1120-1121.1220.10.4028/www.scientific.net/AMR.1120-1121.1220 ↗
16. Psyk V, Risch D, Kinsey BL, Tekkaya AE, Kleiner M. Electromagnetic forming—A review. J Mater Process Technol. 2011;211:787–829. https://doi.org/10.1016/j.jmatprotec.2010.12.012.10.1016/j.jmatprotec.2010.12.012 ↗
17. Wu ZL, Cao QL, Fu JY, Li ZZ, Wan Y, Chen Q, Li L, Han XT. An inner-field uniform pressure actuator with high performance and its application to titanium bipolar plate forming. Int J Mach Tools Manuf. 2020;155: 103570. https://doi.org/10.1016/j.ijmachtools.2020.103570.10.1016/j.ijmachtools.2020.103570 ↗
18. Zhou WJ, Zhao M, Liu B, Ma YZ, Zhang YZ, Wang XJ. Investigation of hydroxyl-terminated polybutadiene propellant breaking characteristics and mechanism impacted by submerged cavitation water jet. Defence Technology. 2024;33:559–72. https://doi.org/10.1016/j.dt.2023.08.011.10.1016/j.dt.2023.08.011 ↗
19. Li FZ, He PY, Chen ZP, Chen SS, Guo J, Xue SW, Guo YQ, Wang Y. Water-jet cavitation shocking as a novel array micro-forming technique. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 2021;235:987–94. https://doi.org/10.1177/0954405420982222.10.1177/0954405420982222 ↗
20. Li FZ, Fan HY, Guo YQ, Chen ZP, Wang X, Li RT, Liu H, Wang Y. Water-jet cavitation shock bulging as novel microforming technique. Chin J Mech Eng. 2021;34:4. https://doi.org/10.1186/s10033-020-00518-3.10.1186/s10033-020-00518-3 ↗
21. Yu C, He PY, Li FZ, Zhang K, Wang Y, Li RT. Forming analysis of T2 copper foil processed by submerged water jet cavitation. Int J Adv Manuf Technol. 2023;126:1497–508. https://doi.org/10.1007/s00170-023-11241-3.10.1007/s00170-023-11241-3 ↗
22. He PY, Jiang SY, Zhang HJ, Li FZ, Yu L, Hu XY, Zhang LQ, Wang Y. Fluid–solid coupling analysis of submerged water jet cavitation micro-forming. Phys Fluids. 2024;36:17128. https://doi.org/10.1063/5.0186649.10.1063/5.0186649 ↗
23. Wang Y, Zhu C, Li FZ, Yu C, Chen SJ, Wu JY. Processing characteristics and loading principle on micro blanking of cavitation jet. Int J Adv Manuf Technol. 2024;133:1317–29. https://doi.org/10.1007/s00170-024-13836-w.10.1007/s00170-024-13836-w ↗
24. Cao S, Ge Z, Zhou Z, Gao F, Liu W, Lu Y. Fracturing mechanism and pore size distributions of rock subjected to water jets under in-situ stress: breakage characteristics investigation. J Petrol Sci Eng. 2022;213: 110392. https://doi.org/10.1016/j.petrol.2022.110392.10.1016/j.petrol.2022.110392 ↗
25. Zhuang D-D, Zhang S-H, Liu H-X, Chen J. Cavitation erosion behaviors and damage mechanism of ti-ni alloy impacted by water jet with different standoff distances. Eng Fail Anal. 2022;139: 106458. https://doi.org/10.1016/j.engfailanal.2022.106458.10.1016/j.engfailanal.2022.106458 ↗
26. Li FZ, Tan ZR, Chen LY, Li RT, Xu ZY, Wang Y. Study on dynamic evolution of cavitation clouds and optimization of standoff distance in water cavitation peening. Journal of Mechanical Engineering. 2019;55:120. https://doi.org/10.3901/JME.2019.09.120.((InChinese)).10.3901/JME.2019.09.120.((InChinese)) ↗
27. Tu YX, Fan CX, Qian YN, Wang XS, Kang Y, Li D. Structure optimization of central⁃body in dual cavitating jet and the behavior of coal breaking under its impact. J. China Coal Soc. 2022;47:3250–9. https://doi.org/10.13225/j.cnki.jccs.ss22.0609. ((In Chinese)).10.13225/j.cnki.jccs.ss22.0609 ↗
28. Huh H, Kang WJ, Han SS. A tension split hopkinson bar for investigating the dynamic behavior of sheet metals. Exp Mech. 2002;42:8–17. https://doi.org/10.1007/BF02411046.10.1007/BF02411046 ↗
29. Johnson GR, Cook WH. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures. Eng Fract Mech. 1985;21:31–48. https://doi.org/10.1016/0013-7944(85)90052-9.10.1016/0013-7944(85)90052-9 ↗
30. Poizat C, Campagne L, Daridon L, Ahzi S, Husson C, Marie L. Modeling and simulation of thin sheet blanking using damage and rupture criteria. Int J Form Processes. 2005;8:29–47. https://doi.org/10.3166/ijfp.8.29-47.10.3166/ijfp.8.29-47 ↗
31. Dirikolu MH, Akdemir E. Computer aided modelling of flexible forming process. J Mater Process Technol. 2004;148:376–81. https://doi.org/10.1016/j.jmatprotec.2004.02.049.10.1016/j.jmatprotec.2004.02.049 ↗
32. Shen ZB, Liu HX, Wang X, Wang CT. Improving the forming capability of laser dynamic forming by using rubber as a forming medium. Appl Surf Sci. 2016;369:288–98. https://doi.org/10.1016/j.apsusc.2016.02.063.10.1016/j.apsusc.2016.02.063 ↗
33. Chen JQ, Gao HT, Hu XL, Yang LQ, Ke DW, Liu XH, Yan S, Lu RH, Misra RDK. The significant size effect on nucleation and propagation of crack during tensile deformation of copper foil: Free surface roughening and crystallography study. Mater Sci Eng A. 2020;790: 139678. https://doi.org/10.1016/j.msea.2020.139678.10.1016/j.msea.2020.139678 ↗
34. Xiao Y, Sun F, Ran J, Wang B, Zhong J, Ma J, Luo F. Ultrasonic micro punching with flexible punch for thin stainless sheet metal. Int J Adv Manuf Technol. 2020;108:2763–73. https://doi.org/10.1007/s00170-020-05544-y.10.1007/s00170-020-05544-y ↗
35. Meng B, Fu MW, Fu CM, Wang JL. Multivariable analysis of micro shearing process customized for progressive forming of micro-parts. Int J Mech Sci. 2015;93:191–203. https://doi.org/10.1016/j.ijmecsci.2015.01.017.10.1016/j.ijmecsci.2015.01.017 ↗
36. Joo B-Y, Rhim S-H, Oh S-I. Micro-hole fabrication by mechanical punching process. J Mater Process Technol. 2005;170:593–601. https://doi.org/10.1016/j.jmatprotec.2005.06.038.10.1016/j.jmatprotec.2005.06.038 ↗
37. Zhang JD, Shen ZB, Lin YY, Liu K, Zhou GY, Wang Y, Zhang L, Li P, Liu HX, Wang X. Improving the forming quality of laser dynamic flexible micropunching by laser pre-shocking. Materials. 2020;13:3667. https://doi.org/10.3390/ma13173667.10.3390/ma13173667 ↗
38. Song LB, Zhang X, Zhang YL, Li H, Ji Z, Zheng C. Shortening post-processing and improving forming quality of holes in laser shock punching with the aid of silicone rubber. Opt Laser Technol. 2018;106:442–50. https://doi.org/10.1016/j.optlastec.2018.05.009.10.1016/j.optlastec.2018.05.009 ↗