journal article·2022-09-12Open access

Evaluation of the impact of electron beam welding parameters on the mechanical properties and microstructure of the resulting joint for 39CrMoV13 and M50NiL steel grades

Zbigniew Wencel, Sylwia Wiewiórowska, Paweł Wieczorek, Jacek Michalczyk, Andrzej Gontarz

Abstract

Abstract The paper covers a study consisting on the implementation of the electron beam welding process of two steel grades: 39CrMoV13 and M50NiL. The welding process was carried out for two values of electron beam debunching, obtaining a joint having different widths. Then, for the samples, after each welding variant, heat treatment was carried out consisting of double tempering at 520 °C for 3 h, and single freezing at − 84 °C for 3 h, combined with single tempering at 520 °C for 3 h. The impact of the parameters of the electron beam welding process and the subsequent heat treatment process on the mechanical properties and microstructure of the resulting joint was analysed. The conducted tests allowed to select the optimum welding technology combined with the heat treatment process for the tested steel grades ensuring that a weld is obtained in which the level of mechanical properties was close to the level of values obtained for the base material.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Metal Alloys Wear and Properties · Advancements in Materials Engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. Kaur A, Ribton C, Balachandaran W. Electron beam characterisation methods and devices for welding equipment. J Mater Process Tech. 2015. https://doi.org/10.1016/j.jmatprotec.2015.02.024.10.1016/j.jmatprotec.2015.02.024 ↗
2. Guirao J, Rodriguez E, Bayon A, Bouyer F, Pistono J, Jones L. Determination through the deflections analysis of the best welding sequence in longitudinal welds VATS electron beam welding FE simulation. Fus Eng Des. 2010. https://doi.org/10.1016/j.fusengdes.2010.05.026.10.1016/j.fusengdes.2010.05.026 ↗
3. Wang T, Zhang BG, Chen GQ, Feng JC. High strength electron beam welded titanium-stainless steel join with V/Cu based composite filler metals. Vacuum. 2013. https://doi.org/10.1016/j.vacuum.2013.01.015.10.1016/j.vacuum.2013.01.015 ↗
4. Zhang F, Wang T, Jiang SY, Zhang BG, Freng JC. Microstructural characteristic and mechanical properties of an electron beam welded Ti/Cu/Ni joint. J Mater Eng Perform. 2018. https://doi.org/10.1007/s11665-018-3325-7.10.1007/s11665-018-3325-7 ↗
5. Yunlian Q, Ju D, Quan H, Liying Z. Electron beam welding, laser beam welding and gas tungsten arc welding of titanium sheet. Mater Sci Eng. 2000;280:177–81.10.1016/S0921-5093(99)00662-0 ↗
6. Agilan M, Vankateswaran T, Sivakumar D, Pant B. Effect of heat input on microstructure and mechanical properties of Inconel-718 EB welds. Proc Mater Sci. 2014. https://doi.org/10.1016/j.mspro.2014.07.312.10.1016/j.mspro.2014.07.312 ↗
7. Reddy GM, Murthy CV, Rao KS, Rao KP. Improvement of mechanical properties of Inconel 718 electron beam welds—influence of welding techniques and post-weld heat treatment. Int J Adv Manuf Technol. 2009;43:671–80.10.1007/s00170-008-1751-7 ↗
8. Huang CA, Wang TH, Lee CH, Han WC. A study of the heat affected zone (HAZ) of an Inconel 718 sheet welded with electron beam welding (EBW). Mater Sci Eng. 2005. https://doi.org/10.1016/j.msea.2005.03.029.10.1016/j.msea.2005.03.029 ↗
9. Dworak J, Węglowski M.St. Electron beam welding, Welding Institute Gliwice, 2014, pp 119–132.
10. Muller M. Comparison between laser and electron beam welding, Praxis des Laserstrahl-Schweissens von Metallen, DVS-VDI (ADB), Fachtagung, 1987, pp 1–18.