journal article·2025-05-29Open access

Microstructure and mechanical properties of Scalmalloy® produced by selective laser melting in term of long-term applications

K. Janus, A. Jarzębska, A. Wójcik, A. Garbacz-Klempka, J. Piekło, S. Terlicka, M. Piękoś, J. J. Sobczak, O. Krasa, Ł. Krawczyk

Abstract

Abstract This study investigates the microstructure-property relationships of Scalmalloy® produced by selective laser melting subsequently subjected to natural aging. The aim of this research was to evaluate the suitability of the alloy for long-term applications. A detailed characterization of the material structure and properties was conducted using scanning and transmission electron microscopy, as well as tensile testing. The microstructure revealed a bimodal grain structure typical for additive manufacturing, consisting of a fine grain zone with an average grain size of 1.4 ± 0.7 µm and a coarse grain zone averaging 10.0 ± 5.6 µm. These zones exhibited distinct crystallographic textures, with the fine grain zone dominated by high-angle grain boundaries and the coarse grain zone by low-angle grain boundaries. In addition, nanoscale precipitates coherent with the Al matrix and uniformly distributed stacking faults were identified, contributing significantly to the mechanical performance of the alloy. The SLM-V samples exhibited excellent mechanical properties, including an ultimate tensile strength of 507 ± 4 MPa, a yield strength of 487 ± 3 MPa, and a total elongation of 9.4 ± 0.7%. The results are also discussed in terms of the recognition of coherent nanoprecipitates within the Al matrix and their influence on the resulting mechanical properties.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Li S-S, Yue X, Li Q-Y, Peng H-L, Dong B-X, Liu T-S, Yang H-Y, Fan J, Shu S-L, Qiu F, Jiang Q-C. Development and applications of aluminum alloys for aerospace industry. J Mark Res. 2023;27:944–83. https://doi.org/10.1016/j.jmrt.2023.09.274.10.1016/j.jmrt.2023.09.274 ↗
2. Hirsch J. Recent development in aluminium for automotive applications. Trans Nonferrous Met Soc China (English Edition). 2014;24(7):1995–2002. https://doi.org/10.1016/S1003-6326(14)63305-7.10.1016/S1003-6326(14)63305-7 ↗
3. Deng Y, Yin Z, Zhao K, Duan J, He Z. Effects of Sc and Zr microalloying additions on the microstructure and mechanical properties of new Al–Zn–Mg alloys. J Alloy Compd. 2012;530:71–80. https://doi.org/10.1016/j.jallcom.2012.03.108.10.1016/j.jallcom.2012.03.108 ↗
4. Aryshenskii E, Lapshov M, Hirsch J, Konovalov S, Bazhenov V, Drits A, Zaitsev D. Influence of the small Sc and Zr Additions on the As-cast microstructure of Al–Mg–Si alloys with excess silicon. Metals. 2021;11(11):1797. https://doi.org/10.3390/met11111797.10.3390/met11111797 ↗
5. Ye Q, Pan B, Liu Q, Hu L, Qu W, Wang XW. Effects of co-addition of minor Sc and Zr on aging precipitates and mechanical properties of Al–Zn–Mg–Cu alloys. J Mark Res. 2023;22:2944–54. https://doi.org/10.1016/j.jmrt.2022.12.133.10.1016/j.jmrt.2022.12.133 ↗
6. Shi Y, Pan Q, Li M, Huang X, Li B. Effect of Sc and Zr additions on corrosion behaviour of Al–Zn–Mg–Cu alloys. J Alloy Compd. 2014;612:42–50. https://doi.org/10.1016/j.jallcom.2014.05.128.10.1016/j.jallcom.2014.05.128 ↗
7. Ocenasek V, Slamova M. Resistance to recrystallization due to Sc and Zr addition to Al–Mg alloys. Mater Charact. 2001;47(2):157–62. https://doi.org/10.1016/S1044-5803(01)00165-6.10.1016/S1044-5803(01)00165-6 ↗
8. Jia Z, Røyset J, Solberg JK, Qing LIU. Formation of precipitates and recrystallization resistance in Al–Sc–Zr alloys. Trans Nonferrous Met Soc China. 2012;22(8):1866–71. https://doi.org/10.1016/S1003-6326(11)61399-X.10.1016/S1003-6326(11)61399-X ↗
9. Li R, Wang M, Li Z, Cao P, Yuan T, Zhu H. Developing a high-strength Al-Mg-Si-Sc-Zr alloy for selective laser melting: crack-inhibiting and multiple strengthening mechanisms. Acta Mater. 2020;193:83–98. https://doi.org/10.1016/j.actamat.2020.03.060.10.1016/j.actamat.2020.03.060 ↗
10. Ma Y, Sun JH, Xie XH, Hu YH, Zhao JC, Yan P. An investigation on fine-grain formation and structural character in cast IN718 superalloy. J Mater Process Technol. 2003;137(1–3):35–9. https://doi.org/10.1016/S0924-0136(02)01063-4.10.1016/S0924-0136(02)01063-4 ↗
11. Yu P, Schaffer GB. Microstructural evolution during pressureless infiltration of aluminium alloy parts fabricated by selective laser sintering. Acta Mater. 2009;57(1):163–70. https://doi.org/10.1016/j.actamat.2008.08.065.10.1016/j.actamat.2008.08.065 ↗
12. Shi Q, Gu D, Xia M, Cao S, Rong T. Effects of laser processing parameters on thermal behavior and melting/solidification mechanism during selective laser melting of TiC/Inconel 718 composites. Opt Laser Technol. 2016;84:9–22. https://doi.org/10.1016/j.optlastec.2016.04.009.10.1016/j.optlastec.2016.04.009 ↗
13. Pauly S, Wang P, Kühn U, Kosiba K. Experimental determination of cooling rates in selectively laser-melted eutectic Al-33Cu. Addit Manuf. 2018;22:753–7. https://doi.org/10.1016/j.addma.2018.05.034.10.1016/j.addma.2018.05.034 ↗
14. Zhang J, Song B, Wei Q, Bourell D, Shi Y. A review of selective laser melting of aluminum alloys: processing, microstructure, property and developing trends. J Mater Sci Technol. 2019;35(2):270–84. https://doi.org/10.1016/j.jmst.2018.09.004.10.1016/j.jmst.2018.09.004 ↗
15. Ouyang D, Xing W, Li N, Li Y, Liu L. Structural evolutions in 3D-printed Fe-based metallic glass fabricated by selective laser melting. Addit Manuf. 2018;23:246–52. https://doi.org/10.1016/j.addma.2018.08.020.10.1016/j.addma.2018.08.020 ↗
16. Chen LY, Huang JC, Lin CH, Pan CT, Chen SY, Yang TL, Lin DY, Lin HK, Jang JSC. Anisotropic response of Ti-6Al-4V alloy fabricated by 3D printing selective laser melting. Mater Sci Eng, A. 2017;682:389–95. https://doi.org/10.1016/j.msea.2016.11.061.10.1016/j.msea.2016.11.061 ↗
17. Zhang B, Bi G, Nai S, Sun C, Wei J. Microhardness and microstructure evolution of TiB2 reinforced Inconel 625/TiB2 composite produced by selective laser melting. Opt Laser Technol. 2016;80:186–95. https://doi.org/10.1016/j.optlastec.2016.01.010.10.1016/j.optlastec.2016.01.010 ↗
18. Zhu Z, Hu Z, Seet HL, Liu T, Liao W, Ramamurty U, Nai SML. Recent progress on the additive manufacturing of aluminum alloys and aluminum matrix composites: microstructure, properties, and applications. Int J Mach Tools Manuf. 2023;190: 104047. https://doi.org/10.1016/j.ijmachtools.2023.104047.10.1016/j.ijmachtools.2023.104047 ↗
19. Laleh M, Sadeghi E, Revilla RI, Chao Q, Haghdadi N, Hughes AE, Xu W, De Graeve I, Qian M, Gibson I, Tan MY. Heat treatment for metal additive manufacturing. Prog Mater Sci. 2023;133: 101051. https://doi.org/10.1016/j.pmatsci.2022.101051.10.1016/j.pmatsci.2022.101051 ↗
20. Cabrera-Correa L, González-Rovira L, De Dios López-Castro J, Castillo-Rodríguez M, Botana FJ. Effect of the heat treatment on the mechanical properties and microstructure of Scalmalloy® manufactured by Selective Laser Melting (SLM) under certified conditions. Mater Charact. 2023;196:112549. https://doi.org/10.1016/j.matchar.2022.112549.10.1016/j.matchar.2022.112549 ↗
21. Spierings AB, Dawson K, Kern K, Palm F, Wegener K. SLM-processed Sc- and Zr- modified Al-Mg alloy: mechanical properties and microstructural effects of heat treatment. Mater Sci Eng A. 2017;701:264–73. https://doi.org/10.1016/j.msea.2017.06.089.10.1016/j.msea.2017.06.089 ↗
22. Kuo CN, Peng PC, Liu DH, Chao CY. Microstructure evolution and mechanical property response of 3D-printed Scalmalloy with different heat-treatment times at 325°C. Metals. 2021;11(4):555. https://doi.org/10.3390/met11040555.10.3390/met11040555 ↗
23. Schmidtke K, Palm F, Hawkins A, Emmelmann C. Process and mechanical properties: applicability of a scandium modified Al-alloy for laser additive manufacturing. Phys Procedia. 2011;12(A):369–74. https://doi.org/10.1016/j.phpro.2011.03.047.10.1016/j.phpro.2011.03.047 ↗
24. Cordova L, Bor T, De Smit M, Camignato S, Campos M, Tinga T. Effects of powder reuse on the microstructure and mechanical behaviour of Al–Mg–Sc–Zr alloy processed by laser powder bed fusion (LPBF). Addit Manuf. 2020;36: 101625. https://doi.org/10.1016/j.addma.2020.101625.10.1016/j.addma.2020.101625 ↗
25. Schimbäck D, Kaserer L, Mair P, Mohebbi MS, Staron P, Maier-Kiener V, Letofsky-Papst I, Kremmer T, Palm F, Montes I, Höppel HW, Leichtfried G, Pogatscher S. Advancements in metal additive manufacturing: in-situ heat treatment of aluminium alloys during the laser powder bed fusion process. Mater Sci Eng, A. 2024;905: 146102. https://doi.org/10.1016/j.msea.2024.146102.10.1016/j.msea.2024.146102 ↗
26. Jia H, Sun H, Wang H, Wu Y, Wang H. Scanning strategy in selective laser melting (SLM): a review. Int J Adv Manuf Technol. 2021;113:2413–35. https://doi.org/10.1007/s00170-021-06810-3.10.1007/s00170-021-06810-3 ↗
27. Janus K, Rogal L, Dutkiewicz J, Chulist R, Korpala G, Prahl U, Konczak K, Kochmanski P, Nalepka K, Maziarz W. Effect of a novel controlled thermomechanical treatment on the microstructure and mechanical properties of a high-carbon nanobainitic steel. Arch Civ Mech Eng. 2023;23:252. https://doi.org/10.1007/s43452-023-00791-8.10.1007/s43452-023-00791-8 ↗
28. Shi J, Sun X, Wang M, Hui W, Dong H, Cao W. Enhanced work-hardening behavior and mechanical properties in ultrafine-grained steels with large-fractioned metastable austenite. Scr Mater. 2010;63(8):815–8. https://doi.org/10.1016/j.scriptamat.2010.06.023.10.1016/j.scriptamat.2010.06.023 ↗
29. Moridi A, Demir AG, Caprio L, Hart AJ, Previtali B, Colosimo BM. Deformation and failure mechanisms of Ti–6Al–4V as built by selective laser melting. Mater Sci Eng A. 2019;768: 138456. https://doi.org/10.1016/j.msea.2019.138456.10.1016/j.msea.2019.138456 ↗
30. Zhao J, Lv B, Zhang F, Yang Z, Qian L, Chen C, Long X. Effects of austempering temperature on bainitic microstructure and mechanical properties of a high-C high-Si steel. Mater Sci Eng A. 2019;742:179–89. https://doi.org/10.1016/j.msea.2018.11.004.10.1016/j.msea.2018.11.004 ↗
31. Ma R, Peng C, Cai Z, Wang R, Zhou Z, Li X, Cao X. Effect of bimodal microstructure on the tensile properties of selective laser melt Al-Mg-Sc-Zr alloy. J Alloy Compd. 2020;815: 152422. https://doi.org/10.1016/j.jallcom.2019.152422.10.1016/j.jallcom.2019.152422 ↗
32. Shakil SI, González-Rovira L, Cabrera-Correa L, de Dios López-Castro J, de Dios López-Castro J, Castillo-Rodríguez M, Javier Botana F, Haghshenas M. Insights into laser powder bed fused Scalmalloy®: investigating the correlation between micromechanical and macroscale properties. J Mark Res. 2023;25:4409–24. https://doi.org/10.1016/j.jmrt.2023.06.228.10.1016/j.jmrt.2023.06.228 ↗
33. Fuller CB, Murray JL, Seidman DN. Temporal evolution of the nanostructure of Al (Sc, Zr) alloys: part I-chemical compositions of Al3 (Sc1-xZrx) precipitates. Acta Mater. 2005;53(20):5401–13. https://doi.org/10.1016/j.actamat.2005.08.016.10.1016/j.actamat.2005.08.016 ↗
34. Saha S, Todorova TZ, Zwanziger JW. Temperature dependent lattice misfit and coherency of Al3X (X = Sc, Zr, Ti and Nb) particles in an Al matrix. Acta Mater. 2015;89:109–15. https://doi.org/10.1016/j.actamat.2015.02.004.10.1016/j.actamat.2015.02.004 ↗
35. Wang P, Gammer C, Brenne F, Prashanth KG, Mendes RG, Rümmeli MH, Gemming T, Eckert J, Scudino S. Microstructure and mechanical properties of a heat-treatable Al-3.5Cu-1.5Mg-1Si alloy produced by selective laser melting. Mater Sci Eng A. 2018;711:562–70. https://doi.org/10.1016/j.msea.2017.11.06.10.1016/j.msea.2017.11.06 ↗
36. Spierings AB, Dawson K, Voegtlin M, Palm F, Uggowitzer PJ. Microstructure and mechanical properties of as-processed scandium-modified aluminium using selective laser melting. CIRP Ann. 2016;65:213–6. https://doi.org/10.1016/j.cirp.2016.04.057.10.1016/j.cirp.2016.04.057 ↗
37. Shaat M, Fathy A, Wagih A. Correlation between grain boundary evolution and mechanical properties of ultrafine-grained metals. Mech Mater. 2020;143: 103321. https://doi.org/10.1016/j.mechmat.2020.103321.10.1016/j.mechmat.2020.103321 ↗
38. Winning M, Rollett AD. Transition between low and high angle grain boundaries. Acta Mater. 2005;53(10):2901–7. https://doi.org/10.1016/j.actamat.2005.03.005.10.1016/j.actamat.2005.03.005 ↗
39. L. Lityńska-Dobrzyńska. Rola skandu i cyrkonu w procesach tworzenia struktur metastabilnych w stopach Al-Mg-Si-Cu. Polska Akademia Nauk: Kraków; 2009 (In Polish).
40. Maziarz W, Greger M, Długosz P, Dutkiewicz J, Wójcik A, Rogal Ł, Stan-Głowińska K, Hilser O, Pastrank M, Cizek L, Rusz S. Effect of severe plastic deformation process on microstructure and mechanical properties of AlSi/SiC composite. J Mark Res. 2022;17:948–60. https://doi.org/10.1016/j.jmrt.2022.01.023.10.1016/j.jmrt.2022.01.023 ↗
41. Li R, Chen H, Zhu H, Wang M, Chen C, Yuan T. Effect of aging treatment on the microstructure and mechanical properties of Al-3.02Mg-0.2Sc-0.1Zr alloy printed by selective laser melting. Mater Des. 2019;168:107668. https://doi.org/10.1016/j.matdes.2019.107668.10.1016/j.matdes.2019.107668 ↗
42. Zhemchuzhnikova DA, Lebyodkin MA, Lebedkina TA, Kaibyshev RO. Unusual behavior of the Portevin-Le Chatelier effect in an AlMg alloy containing precipitates. Mater Sci Eng, A. 2015;639:37–41. https://doi.org/10.1016/j.msea.2015.04.094.10.1016/j.msea.2015.04.094 ↗
43. He BB, Hu B, Yen HW, Cheng GJ, Wang ZK, Luo HW, Huang MX. High dislocation density-induced large ductility in deformed and partitioned steels. Science. 2017;357(6355):1029–32. https://doi.org/10.1126/science.aan0177.10.1126/science.aan0177 ↗
44. Ma R, Peng C, Cai Z, Wang R, Zhou Z, Li X, Cao X. Effect of bimodal microstructure on the tensile properties of selective laser melt Al–Mg–Sc–Zr alloy. Acta Mater. 2022;229: 117749. https://doi.org/10.1016/j.actamat.2022.117749.10.1016/j.actamat.2022.117749 ↗
45. Jia QB, Rometsch P, Kürnsteiner P, Chao Q, Huang AJ, Weyland M, Bourgeois L, Wu XH. Selective laser melting of a high strength Al-Mn-Sc alloy: alloy design and strengthening mechanisms. Acta Mater. 2019;171:108–18. https://doi.org/10.1016/j.actamat.2019.04.014.10.1016/j.actamat.2019.04.014 ↗
46. Belelli F, Casati R, Andrianopoli C, Cuccaro F, Vedani M. Investigation and characterization of an Al-Mg-Zr-Sc alloy with reduced Sc content for laser powder bed fusion. J Alloy Compd. 2022;924: 166519. https://doi.org/10.1016/j.jallcom.2022.166519.10.1016/j.jallcom.2022.166519 ↗
47. Guo Y, Liao H, Chang C, Yan X, Deng Z, Dong D, Chu Q, Deng Y, Liu M. Effects of solute atoms re-dissolution on precipitation behavior and mechanical properties of selective laser melted Al–Mg-Sc-Zr alloys. Mater Sci Eng A. 2022;854: 143870. https://doi.org/10.1016/j.msea.2022.143870.10.1016/j.msea.2022.143870 ↗
48. Li D, Wu Y, Geng Z, Zhang J, Chen C, Liu X, Liu Y, Zhou K. High strength Al−Mg−Sc−Zr alloy with heterogeneous grain structure and intragranular precipitation produced by laser powder bed fusion. J Alloy Compd. 2023;939: 168722. https://doi.org/10.1016/j.jallcom.2023.168722.10.1016/j.jallcom.2023.168722 ↗
49. Spierings AB, Dawson K, Heeling T, Uggowitzer PJ, Schaublin R, Palm F, Wegner K. Microstructural features of Sc- and Zr-modified Al-Mg alloys processed by selective laser melting. Mater Des. 2017;115:52–63. https://doi.org/10.1016/j.matdes.2016.11.040.10.1016/j.matdes.2016.11.040 ↗
50. Maziarz W, Wójcik A, Chulist R, Bigos A, Kurtyka P, Szymanski Ł, Zabaleta AJ, García de Cortázar M, Olejnik E. Microstructure and mechanical properties of Al/TiC and Al/(Ti, W)C nanocomposites fabricated via in situ casting method. J Mark Res. 2024;28:1852–63. https://doi.org/10.1016/j.jmrt.2023.12.126.10.1016/j.jmrt.2023.12.126 ↗
51. Rogal Ł, Kalita D, Tarasek A, Bobrowski P, Czerwinski F. Effect of SiC nano-particles on microstructure and mechanical properties of the CoCrFeMnNi high entropy alloy. J Alloy Compd. 2017;708:344–52. https://doi.org/10.1016/j.jallcom.2017.02.274.10.1016/j.jallcom.2017.02.274 ↗
52. Brochu M, Portillo G. Grain refinement during rapid solidification of aluminum-zirconium alloys using electrospark deposition. Mater Trans. 2013;54(6):934–9. https://doi.org/10.2320/matertrans.MD201228.10.2320/matertrans.MD201228 ↗
53. Schmid F, Gehringer D, Kremmer T, Cattini L, Uggowitzer PJ, Holec D, Pogatscher S. Stabilization of Al3Zr allotropes in dilute aluminum alloys via the addition of ternary elements. Materialia. 2022;21: 101321. https://doi.org/10.1016/j.mtla.2022.101321.10.1016/j.mtla.2022.101321 ↗
54. Muzyk M, Pakiela Z, Kurzydlowski KJ. Ab initio calculations of the generalized stacking fault energy in aluminium alloys. Scr Mater. 2011;64(9):916–8. https://doi.org/10.1016/j.scriptamat.2011.01.034.10.1016/j.scriptamat.2011.01.034 ↗
55. Barr CJ, Xia K. Grain refinement in low SFE and particle-containing nickel aluminium bronze during severe plastic deformation at elevated temperatures. J Mater Sci Technol. 2021;82:57–68. https://doi.org/10.1016/j.jmst.2020.12.016.10.1016/j.jmst.2020.12.016 ↗
56. Zhang X, Li L, Wang Z, Peng H, Gao J, Peng Z. A novel high-strength Al–La–Mg–Mn alloy for selective laser melting. J Mater Sci Technol. 2023;137:205–14. https://doi.org/10.1016/j.jmst.2022.07.046.10.1016/j.jmst.2022.07.046 ↗
57. Li R, Wang M, Li Z, Cao P, Yuan T, Zhu H. Developing a high-strength Al-Mg-Si-Sc-Zr alloy for selective laser melting: crack-inhibiting and multiple strengthening mechanisms. Addit Manuf. 2022;56: 102914. https://doi.org/10.1016/j.addma.2022.102914.10.1016/j.addma.2022.102914 ↗
58. Spierings AB, Dawson K, Kern K, Palm F, Wegener K. L-PBF-processed Sc- and Zr- modified Al-Mg alloy: mechanical properties and microstructural effects of heat treatment. Mater Sci Eng A. 2017;701:264–73. https://doi.org/10.1016/j.msea.2017.06.089.10.1016/j.msea.2017.06.089 ↗
59. ZhaoJ LL, Xue X, Liu T, Luo L, Wang B, Wang Y, Wang L, Su Y, Guo J, Fu H. The evolution and characterizations of Al3 (ScxZr1-x) phase in Al–Mg-based alloys proceeded by SLM. Mater Sci Eng A. 2021;824: 141863. https://doi.org/10.1016/j.msea.2021.141863.10.1016/j.msea.2021.141863 ↗