journal article·2024-11-19

Retrofitting fiber-reinforced concrete beams with nano-graphene oxide and CFRP sheet: an experimental study

Mohammad Reza Halvaeyfar, Mojtaba Gorji Azandariani, Ehsanollah Zeighami, S. Mohammad Mirhosseini

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Zhang J, Pei Z, Rong X. Seismic performance of HSS reinforced interior beam-column joints with high-strength steel fiber concrete and enhanced reinforcements. J Build Eng. 2022;48: 103958. https://doi.org/10.1016/j.jobe.2021.103958.10.1016/j.jobe.2021.103958 ↗
2. Zhou Y, Chen T, Pei Y, Hwang HJ, Hu X, Yi W, Deng L. Static load test on progressive collapse resistance of fully assembled precast concrete frame structure. Eng Struct. 2019;200: 109719. https://doi.org/10.1016/J.ENGSTRUCT.2019.109719.10.1016/J.ENGSTRUCT.2019.109719 ↗
3. Yu F, Wang S, Fang Y, Zhang N, Wang Y, Nuermaimaiti M. Seismic behavior of interior polyvinyl chloride–carbon fiber-reinforced polymer-confined concrete column–ring beam joints. Arch Civ Mech Eng. 2023;23:1–19. https://doi.org/10.1007/S43452-022-00586-3/METRICS.10.1007/S43452-022-00586-3/METRICS ↗
4. Gorji Azandariani M, Vajdian M, Asghari K, Mehrabi S. Mechanical properties of polyolefin and polypropylene fibers-reinforced concrete—an experimental study. Compos Part C Open Access. 2023;12: 100410. https://doi.org/10.1016/J.JCOMC.2023.100410.10.1016/J.JCOMC.2023.100410 ↗
5. Krassowska J, Kosior-Kazberuk M, Berkowski P. Shear behavior of two-span fiber reinforced concrete beams. Arch Civ Mech Eng. 2019;19:1442–57. https://doi.org/10.1016/J.ACME.2019.09.005/METRICS.10.1016/J.ACME.2019.09.005/METRICS ↗
6. Kim HS, Shin YS. Flexural behavior of reinforced concrete (RC) beams retrofitted with hybrid fiber reinforced polymers (FRPs) under sustaining loads. Compos Struct. 2011;93:802–11. https://doi.org/10.1016/J.COMPSTRUCT.2010.07.013.10.1016/J.COMPSTRUCT.2010.07.013 ↗
7. Zhang M, Deng M, Wu Z, Pan J. Flexural cracking behavior and calculation approach of reinforced highly ductile fiber-reinforced concrete beams. Arch Civ Mech Eng. 2021;21(4):1–14. https://doi.org/10.1007/S43452-021-00309-0.10.1007/S43452-021-00309-0 ↗
8. Alam MA, Al Riyami K. Shear strengthening of reinforced concrete beam using natural fibre reinforced polymer laminates. Constr Build Mater. 2018;162:683–96. https://doi.org/10.1016/j.conbuildmat.2017.12.011.10.1016/j.conbuildmat.2017.12.011 ↗
9. Nematzadeh M, Dashti J, Sabetifar H, Gholampour A, Arjomandi A. Combined effect of handmade CFRP strip stirrups and forta-ferro fibers on shear behavior of concrete beams. Arch Civ Mech Eng. 2022;22:1–23. https://doi.org/10.1007/S43452-022-00469-7/METRICS.10.1007/S43452-022-00469-7/METRICS ↗
10. Hason MM, Hanoon AN, Al Zand AW, Abdulhameed AA, Al-Sulttani AO. Torsional strengthening of reinforced concrete beams with externally-bonded fibre reinforced polymer: an energy absorption evaluation. Civ Eng J. 2020;6:69–85. https://doi.org/10.28991/CEJ-2020-SP(EMCE)-07.10.28991/CEJ-2020-SP(EMCE)-07 ↗
11. Zhang W, Liu X, Huang Y, Tong M-N. Reliability-based analysis of the flexural strength of concrete beams reinforced with hybrid BFRP and steel rebars. Arch Civ Mech Eng. 2022;22:171. https://doi.org/10.1007/s43452-022-00493-7.10.1007/s43452-022-00493-7 ↗
12. Acar V, Cakir F, Uysal H, Seydibeyoglu MO, Akbulut H, Mosalam KM. Strengthening of concrete beams by monolayer prepreg composites with and without graphene reinforcement. Constr Build Mater. 2017;151:866–80. https://doi.org/10.1016/j.conbuildmat.2017.06.150.10.1016/j.conbuildmat.2017.06.150 ↗
13. Ge W, Wang Y, Ashour A, Lu W, Cao D. Flexural performance of concrete beams reinforced with steel–FRP composite bars. Arch Civ Mech Eng. 2020;20:1–17. https://doi.org/10.1007/S43452-020-00058-6/METRICS.10.1007/S43452-020-00058-6/METRICS ↗
14. Soliman E, Kandil UF, Reda Taha M. Limiting shear creep of epoxy adhesive at the FRP–concrete interface using multi-walled carbon nanotubes. Int J Adhes Adhes. 2012;33:36–44. https://doi.org/10.1016/J.IJADHADH.2011.09.006.10.1016/J.IJADHADH.2011.09.006 ↗
15. Abdulhameed AA, Said AI. CFRP laminates reinforcing performance of short-span wedge-blocks segmental beams. Fibers. 2020;8:6. https://doi.org/10.3390/FIB8010006.10.3390/FIB8010006 ↗
16. Razaqpur AG, Lamberti M, Ascione F. Debonding evolution in nonlinear FRP-retrofitted RC beams with cohesive interface. Compos Struct. 2020;236: 111858. https://doi.org/10.1016/j.compstruct.2020.111858.10.1016/j.compstruct.2020.111858 ↗
17. Wei L, Liu X, Gao Y, Lv X, Hu N, Chen M. Synergistic strengthening effect of titanium matrix composites reinforced by graphene oxide and carbon nanotubes. Mater Des. 2021;197: 109261. https://doi.org/10.1016/j.matdes.2020.109261.10.1016/j.matdes.2020.109261 ↗
18. Ramezanzadeh B, Ahmadi A, Mahdavian M. Enhancement of the corrosion protection performance and cathodic delamination resistance of epoxy coating through treatment of steel substrate by a novel nanometric sol-gel based silane composite film filled with functionalized graphene oxide nanosheets. Corros Sci. 2016;109:182–205. https://doi.org/10.1016/j.corsci.2016.04.004.10.1016/j.corsci.2016.04.004 ↗
19. Xu H, Song G, Ma L, Feng P, Xu L, Zhang L, Zhao Z, Jin J, Chen Z, Li X. Evolution of properties and enhancement mechanism of large-scale three-dimensional graphene oxide-carbon nanotube aerogel/polystyrene nanocomposites. Polym Test. 2021;97: 107158. https://doi.org/10.1016/j.polymertesting.2021.107158.10.1016/j.polymertesting.2021.107158 ↗
20. Gorlova AM, Kayl NL, Komova OV, Netskina OV, Ozerova AM, Odegova GV, Bulavchenko OA, Ishchenko AV, Simagina VI. Fast hydrogen generation from solid NH3BH3 under moderate heating and supplying a limited quantity of CoCl2 or NiCl2 solution. Renew Energy. 2018;121:722–9. https://doi.org/10.1016/j.renene.2018.01.089.10.1016/j.renene.2018.01.089 ↗
21. Mallakpour S, Hatami M. Green and eco-friendly route for the synthesis of Ag@Vitamin B9-LDH hybrid and its chitosan nanocomposites: characterization and antibacterial activity. Polymer (Guildf). 2018;154:188–99. https://doi.org/10.1016/j.polymer.2018.08.077.10.1016/j.polymer.2018.08.077 ↗
22. Kim MS, Lee YH, Kim H, Scanlon A, Lee J. Flexural behavior of concrete beams reinforced with aramid fiber reinforced polymer (AFRP) bars. Struct Eng Mech. 2011;38:459. https://doi.org/10.12989/SEM.2011.38.4.459.10.12989/SEM.2011.38.4.459 ↗
23. Wang X, Tang F, Qi X, Lin Z. Mechanical, electrochemical, and durability behavior of graphene nano-platelet loaded epoxy-resin composite coatings. Compos Part B Eng. 2019;176: 107103. https://doi.org/10.1016/j.compositesb.2019.107103.10.1016/j.compositesb.2019.107103 ↗
24. ASTM Standard Test: ASTM-C33. Standard specification for concrete aggregates. American Society for Testing Materials; 2018.
25. ASTM D792. Standard test methods for density and specific gravity (relative density) of plastics by displacement. American Society for Testing and Materials, 20AD.
26. ASTM C156. Standard test method for water loss [from a mortar specimen] through liquid membrane-forming curing compounds for concrete. West Conshohocken: American Society for Testing and Materials; 2011.
27. ASTM D3039/D3039M-17. Standard test method for tensile properties of polymer matrix composite materials. West Conshohocken: American Society for Testing and Materials; 2017.
28. ASTM C39/C39M-20. Standard test method for compressive strength of cylindrical concrete specimens. West Conshohocken: American Society for Testing and Materials; 2020.
29. ASTM C78. Test method for flexural strength of concrete (using simple beam with third-point loading). West Conshohocken: American Society for Testing and Materials; 2006.