Modelling of phase transformations occurring in the process of austempered ductile iron manufacturing
Source abstract
Abstract
Abstract The paper presents mathematical models and their implementation in C # language describing the phase transformations occurring in the process of austempered ductile iron (ADI) manufacture. The research includes two main stages: austenitization and isothermal holding at the bainitic range. The influence of free energy of austenite and ferrite on transformations was taken into account. Parameters of models were identified based on inverse analysis and experimental research. As part of the research, verification and validation of the developed models was carried out based on the results of experimental research. The tool developed and implemented enables the analysis of phase transformations occurring during heat treatment with isothermal holding of ductile iron with Ni addition.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Nili Ahmadabadi M, Parsa MH. Austenitisation kinetics of unalloyed and alloyed ductile iron. Mate Sci Technol. 2001;17(2):162–7.10.1179/026708301101509953 ↗
2. Yazdani S, Elliot R. Influence of molybdenum on austempering behaviour of ductile iron - part 1. Mater Sci Technol. 1999;15(5):531–40.10.1179/026708399101506247 ↗
3. Akbay T, Reed R, Atkinson C. Modelling reaustenitisation from ferrite/cementite mixtures in Fe-C steels. Acta Mater. 1994;42:1469–80.10.1016/0956-7151(94)90165-1 ↗
4. Podrzucki C. Żeliwo. Struktura, własności, zastosowanie, vol. I i II. Kraków: ZG STOP; 1991.
5. Trepczyńska-Łent M, Dymski S. Pogląd na austenityzowanie osnowy podczas hartowania żeliwa ADI. Archiwum Odlewnictwa. 2005;5(17):353–64.
6. Darwish N, Elliott R. Austempering of low manganese ductile irons. Mater Sci Technol. 1993;9(7):572–602.10.1179/mst.1993.9.7.572 ↗
7. Dorazill E, Barta B, Crhak J, Munsterova E. High-strength bainitic cast iron with spheroidal graphite. Met Sci Heat Treat. 1978;20(7):532–5.10.1007/BF00780324 ↗
8. Moore DJ, Rouns TN, Rundman KB. Effects of manganese on structure and properties of austempered ductile iron: a processing window concept. Trans Am Foundry Soc. 1986;48:255–64.
9. Bayati H, Rimmer AL, Elliott R. The austempering kinetics and processing window in austempered, low-manganese compacted graphite cast iron. Cast Metals. 1994;7(1):11–24.10.1080/09534962.1994.11819159 ↗
10. Rajnovic J, Eric O, Sidjanin L. The standard processing window of alloyed ADI materials. Konove Mater. 2012;50:199–208.
11. Dorazil E, Holzmann M, Crhák J, Kohout J. Influence of low and cryogenic temperature on deformability and fracture behaviour of austempered ductile cast irons under static and impact stresses. Giesserei-Praxis. 1985;8(9):109–23.
12. Wilk-Kołodziejczyk D, Mrzygłód B, Regulski K. Influence of proces parameters on the properties of austempered ductile iron (ADI) examined with the use of data mining methods. Metalurgija. 2016;55(4):849–51.
13. Olejarczyk-Wożeńska I, Adrian H, Wilk-Kołodziejczyk D, Kluska-Nawarecka S. Numerical model of pearlite—austenite transformation. Metal. 2014;2014:611–7.
14. Olejarczyk-Wożeńska I, Adrian H, Mrzygłód B. Mathematical model of the process of pearlite austenitization. Arch Metall Mater. 2014;59(3):981–6.10.2478/amm-2014-0165 ↗
15. Rees GI, Bhadeshia HK. Bainite transformation kinetics. Part 1: modified model. Mater Sci Technol. 1992;8:985–93.10.1179/mst.1992.8.11.985 ↗
16. Rees GI, Bhadeshia HK. Bainite transformation kinetics. Part 2: non-uniform distribution of carbon. Mater Sci Technol. 1992;8:994–6.10.1179/mst.1992.8.11.994 ↗
17. Chester NA, Bhadeshia H. Mathematical modelling of bainite transformation kinetics. J Phys IV. 1997;C5(7):41–6.
18. Takahashi M, Bhadeshia HK. A model for the microstructure of some advanced bainitic steels. Mater Trans. 1991;32(8):689–96.10.2320/matertrans1989.32.689 ↗
19. Bhadeshia HK. Thermodynamic analysis of isothermal transformation diagrams. Metal Sci. 1982;16:159–65.10.1179/030634582790427217 ↗
20. Chang LC. An analysis of retained austenite in austempered ductile iron. Metall Mater Trans A. 2003;34A:211–7.10.1007/s11661-003-0323-6 ↗
21. Bhadeshia HK. Bainite in steels. Transformations, microstructure and properties. 2nd ed. Cambridge: Institute of Materials; 2001.
22. Adrian H. Numeryczne modelowanie procesów obróbki cieplnej. Kraków: Wydawnictwa AGH; 2011.
23. Olejarczyk-Wożeńska I, Adrian H, Mrzygłód B, Głowacki M. Mathematical model of bainitic transformation in austempered ductile iron. Arch Foundry Eng. 2017;17(4):200–6.10.1515/afe-2017-0158 ↗
24. Mrzygłód B, Kowalski A, Olejarczyk-Wożeńska I, Giętka T, Głowacki M. Characteristics of ADI ductile cast iron with single addition of 1.56% Ni. Arch Metall Mater. 2017;62:2273–80.10.1515/amm-2017-0335 ↗
25. Hamid Ali A, Elliot R. Influence of austenitising temperature on austempering of an Mn-Mo-Cu alloyed ductile iron. Part 1: austempering kinetics and the processing window. Mater Sci Technol. 1996;12:1021–31.10.1179/026708396790121982 ↗
26. Ławrynowicz Z. Kinetics of the bainite transformation in austempered ductile iron ADI. Adv Mater Sci. 2016;16(2):47–56.10.1515/adms-2016-0008 ↗
27. Olejarczyk-Wożeńska I, Giętka T, Adrian H, Mrzygłód B, Głowacki M, Goły M. X-ray structural analysis of ductile iron with the addition of Ni heat-treated under isothermal conditions. Metal. 2016;2016:813–8.